Migration key error
I have a R/3 4.71 system, on AIX 5.1, oracle 9.2.0.3. I bought a new IBM SERVER pP 550. I need to migrate R/3 to this new server. I used system copy to export all data. but when I import it , Migration key always error, why ? I got key from service marketplay . help!
we didn't pay service pay for many years, so SAP can't help us. it always display " the migration key for heterogene systemcopy is wrong ! try again!
Similar Messages
-
Migration Key - How to Open a CSS Message
Hi Team,
We got the discovery system and asked SAP to get us a separate licence for mySAP ERP 2005. We got the CD-DVD's and SAP says that we can generate the licence key from the service marketplace. Now in the installation guide, it is mentioned that we should get the migration key by using CSS and opening a message in CSS Component: CA-SOA-DS. When I go the tab "Report Product Error" in CSS, the table control which displays the systems is still blank. I cannot go to the next step and open a message to request migration key. We really don't want to install the CD-DVD's on a separate server. We just want to get the discovery system up and running and it looks like without the migration key we can't proceed further.
Questions:
1) How do I start a CSS message without the system number getting displayed in the service marketplace. I have the installation number etc with me.
2) Do we have to install and run something else prior to asking for migration key?
Please respond as this is causing problems. Your help will be much appreciated.
ThanksHi Sachin,
I'll try to shine some light on the topic you brought up.
The Discovery System is shipped already pre-installed on the hardware. Thus there are no CD-DVD's that would allow installation on a seperate system. It follows the concept of an appliance.
To license it you need to have a valid license for SAP ERP on MS SQL. This is the installation number you will need to request the license key from Service Marketplace. If you don't have that in place (no license or on different DB) please contact your SAP counterpart.
Following the steps in the Quick Guide (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b22d4e44-0e01-0010-ffa4-fe9c59939e5e) in sequence should guide you through all the necessary activities.
Hope that helps,
rAimund -
Migration key : wrong : while importing
hello gurus
i am importing an export from source system to destination system
source system
os : HP-UX
ver: B 11.23
DB: oracle 9.2.0.6.0
target system
os: Win2000 advanced server
DB: oracle 9.2.0.6.0
its giving error in migration key
it says
" The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log. "
m attaching
property sheet
src.ci.sid=MYP
src.ci.instance.number=00
src.ci.instance.name=JC00
src.ci.host=sapux1
src.iaik.fullVersion=false
src.java.encrypt.policy=strong
src.export.version=1.11
src.j2ee.apps=portal,kmc
src.export.typeIsCopy=true
db.copyWithDBtools=false
src.db=b3Jh
src.os=SFBJQTY0
src.dt=V2VkIEp1bCAxMSAxNjoyNDo1MyBHTVQrMDUzMCAoSVNUKSAyMDA3
src.id=MTcyNzk\=
src.ap=U0FQX0pURUNIUyxTQVAtSkVFLFNBUC1KRUVDT1IsU0FQX0pURUNIRix6b29tdXAuc2NhLExNLVRP\nT0xTLE5XTUFETUlO
src.so=U3RhbmRhbG9uZQ\=\=
sapinst
INFO 2007-07-17 14:28:27
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2007-07-17 14:28:27
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2007-07-17 14:28:34
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.log to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.1.log.
INFO 2007-07-17 14:28:34
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.log to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.1.log.
INFO 2007-07-17 14:28:34
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\change.1.log.
INFO 2007-07-17 14:28:34
Removing file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\change.log.
INFO 2007-07-17 14:28:34
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\change.log.
INFO 2007-07-17 14:28:34
Output of change 'user' '/install' is written to the logfile change.log.
WARNING 2007-07-17 14:28:34
Execution of the command "change 'user' '/install'" finished with return code 1. Output:
This utility needs Terminal Services to be running.
INFO 2007-07-17 14:28:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'LTITEST\Administrator' on host '.'.
INFO 2007-07-17 14:28:35
File not found: [C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.956.1184662597/msvcp71.dll].
INFO 2007-07-17 14:28:35
File not found: [C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.956.1184662597/msvcr71.dll].
INFO 2007-07-17 14:28:36
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\summary.html.
PHASE 2007-07-17 14:28:36
Prepare the installation program.
INFO 2007-07-17 14:28:51
Installation start: Tuesday, 17 July 2007, 14:28:28; installation directory: C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\CENTRAL\ONE_HOST; product to be installed: SAP NetWeaver '04 Support Release 1> Java System> Oracle> Central System> Migration - Target System Installation
INFO 2007-07-17 14:29:41
This SAPinst Java System Copy is Property File Version : 1.11
INFO 2007-07-17 14:29:41
This SAPinst EXE uses OS Build Version : I386
INFO 2007-07-17 14:29:41
This SAPinst XML is DB Build Version : ora
INFO 2007-07-17 14:53:00
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:53:58
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:01
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:07
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:12
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:17
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:22
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:29
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:34
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:38
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:42
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:46
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:50
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
sapinst_dev
TRACE [iaxxccontrolfile.cpp:344]
CControlFile::getMessageFilePath()
Running with messages from C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST
TRACE [sapinst.cpp:306]
CSapInst::initMessaging()
This is SAPinst, version 642, build 703609
compiled on Nov 21 2004, 22:48:58
TRACE [sapinst.cpp:311]
CSapInst::initMessaging()
Gui connected by user Administrator from host LTITEST
TRACE [syxxsyshlp.cpp:133]
syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
= C:=C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\CENTRAL\ONE_HOST
ALLUSERSPROFILE = C:\Documents and Settings\All Users
APPDATA = C:\Documents and Settings\Administrator\Application Data
CommonProgramFiles = C:\Program Files\Common Files
COMPUTERNAME = LTITEST
ComSpec = C:\WINNT\system32\cmd.exe
HOMEDRIVE = C:
HOMEPATH = \Documents and Settings\Administrator
LOGONSERVER =
LTITEST
NUMBER_OF_PROCESSORS = 1
OS = Windows_NT
Os2LibPath = C:\WINNT\system32\os2\dll;
Path = D:\oracle\COE\ora92\jre\1.4.2\bin\client;D:\oracle\COE\ora92\jre\1.4.2\bin;D:\oracle\COE\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem
PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE = x86
PROCESSOR_IDENTIFIER = x86 Family 6 Model 8 Stepping 3, GenuineIntel
PROCESSOR_LEVEL = 6
PROCESSOR_REVISION = 0803
ProgramFiles = C:\Program Files
SAPINST_EXEDIR_CD = C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST
SystemDrive = C:
SystemRoot = C:\WINNT
TEMP = C:\DOCUME1\ADMINI1\LOCALS~1\Temp
TMP = C:\DOCUME1\ADMINI1\LOCALS~1\Temp
USERDOMAIN = LTITEST
USERNAME = Administrator
USERPROFILE = C:\Documents and Settings\Administrator
windir = C:\WINNT
User: LTITEST\Administrator, Id: S-1-5-21-329068152-1788223648-682003330-500
Working directory: C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\CENTRAL\ONE_HOST
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Increase quotas, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
Privilege SeUndockPrivilege, display name: Remove computer from docking station, enabled.
Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, enabled.
Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
TRACE [synxcsyinf.cpp:92]
CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
TRACE [syxxsyshlp.cpp:143]
syslib::logSystemState()
System information
==================
OS version, host name: Microsoft Windows NT [Version 5.0.2195 Service Pack 4] LTITEST
RAM size (MB): 2047.53
Swap size (MB): 4096
TRACE [iaxxclientacceptor.cpp:124]
CClientAcceptor::acceptImpl()
Running with control file C:/PROGRA1/SAPINS1/NW04SR1/WEBAS_~1/CENTRAL/ONE_HOST/control.xml version 642 and changelist 702011
TRACE [iaxxccontrolfile.cpp:235]
CControlFile::getDialogControlFileName()
Running with dialog control file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/dialog.xml
TRACE [iaxxccontrolfile.cpp:184]
CControlFile::getResourecFileName()
Running with resource file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/helppool.xml
INFO 2007-07-17 14:28:27 [syxxcfile.cpp:325]
CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2007-07-17 14:28:27 [syxxcfile.cpp:446]
CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/keydb.xml to: q0w9e9r8t7.1.xml.
TRACE [iaxxclib.cpp:165]
load()
Opened iaccdlib.dll
TRACE [synxcsyinf.cpp:92]
CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
TRACE [synxcsyinf.cpp:92]
CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
TRACE [synxcsyinf.cpp:92]
CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
TRACE [iaxxccontrolfile.cpp:77]
CControlFile::getControlFilePath()
Running with control file path C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|changeUserInstall
TRACE [iaxxclib.cpp:165]
load()
Opened iamodos.dll
TRACE [synxccuren.cpp:780]
CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
INFO 2007-07-17 14:28:34 [syxxcfile.cpp:325]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.1.log, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.log to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.1.log.
INFO 2007-07-17 14:28:34 [syxxcfile.cpp:446]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.1.log, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.log to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.1.log.
INFO 2007-07-17 14:28:34 [synxcpath.cpp:834]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\change.1.log.
INFO 2007-07-17 14:28:34 [synxcfile.cpp:152]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\change.log.
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
nodeType: 'UNKNOWN'
INFO 2007-07-17 14:28:34 [synxcpath.cpp:834]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\change.log.
TRACE [iaxxclib.cpp:165]
load()
Opened iajsmod.dll
INFO 2007-07-17 14:28:34
CJSlibModule::writeInfo_impl()
Output of change 'user' '/install' is written to the logfile change.log.
WARNING 2007-07-17 14:28:34
CJSlibModule::writeWarning_impl()
Execution of the command "change 'user' '/install'" finished with return code 1. Output:
This utility needs Terminal Services to be running.
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step changeUserInstall with key Preinstall|ind|ind|ind|ind|ind|0|changeUserInstall has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|AddPrivilege
TRACE [synxccuren.cpp:780]
CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE [synxccuren.cpp:780]
CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE [iaxxclib.cpp:165]
load()
Opened iamodnt.dll
TRACE [ianxbusprv.cpp:288]
CIaNtUserPrivileges::add_impl(., LTITEST\Administrator, SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege)
Ignored existing privilege: SeTcbPrivilege
TRACE [ianxbusprv.cpp:288]
CIaNtUserPrivileges::add_impl(., LTITEST\Administrator, SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege)
Ignored existing privilege: SeAssignPrimaryTokenPrivilege
TRACE [ianxbusprv.cpp:288]
CIaNtUserPrivileges::add_impl(., LTITEST\Administrator, SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege)
Ignored existing privilege: SeIncreaseQuotaPrivilege
INFO 2007-07-17 14:28:35 [ianxbusprv.cpp:337]
CIaNtUserPrivileges::add_impl(., LTITEST\Administrator, SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege)
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'LTITEST\Administrator' on host '.'.
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step AddPrivilege with key Preinstall|ind|ind|ind|ind|ind|0|AddPrivilege has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|replaceDLLs
INFO 2007-07-17 14:28:35
CJSlibModule::writeInfo_impl()
File not found: [C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.956.1184662597/msvcp71.dll].
INFO 2007-07-17 14:28:35
CJSlibModule::writeInfo_impl()
File not found: [C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.956.1184662597/msvcr71.dll].
TRACE [synxcsyinf.cpp:92]
CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step replaceDLLs with key Preinstall|ind|ind|ind|ind|ind|0|replaceDLLs has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|registerEventsDll
TRACE [synxcsyinf.cpp:92]
CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.956.1184662597/sapinstevents.dll not found.
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
E:/EP6Dump/WAS640InstMaster\IM01_NT_I386\SAPINST/NT/I386/sapinstevents.dll not found.
TRACE [synxcfile.cpp:134]
CSyFileImpl::getFileVersion()
file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/sapinstevents.dll has version 693717.642
TRACE [synxcfile.cpp:134]
CSyFileImpl::getFileVersion()
file C:/WINNT/system32/SAPinst/sapinstevents.dll has version 703609.642
TRACE [syxxcfile.cpp:240]
CSyFileImpl::copy(const CSyPath & C:/WINNT/system32/SAPinst/sapinstevents.dll, ISyNode::eCopyMode 545, ISyProgressObserver*) const
Did not copy file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/sapinstevents.dll to: C:/WINNT/system32/SAPinst/sapinstevents.dll (source file version is not higher than target file version)
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step registerEventsDll with key Preinstall|ind|ind|ind|ind|ind|0|registerEventsDll has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|diSummarize
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step diSummarize with key Preinstall|ind|ind|ind|ind|ind|0|diSummarize has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|diProgress
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step diProgress with key Preinstall|ind|ind|ind|ind|ind|0|diProgress has been executed successfully.
INFO 2007-07-17 14:28:36 [synxcpath.cpp:834]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\summary.html.
PHASE 2007-07-17 14:28:36 [iaxxcwalker.cpp:416]
CDomWalker::printPhaseInfo()
Prepare the installation program.
INFO 2007-07-17 14:28:51 [iaxxcwalker.cpp:59]
CDomWalker::walk()
Installation start: Tuesday, 17 July 2007, 14:28:28; installation directory: C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\CENTRAL\ONE_HOST; product to be installed: SAP NetWeaver '04 Support Release 1> Java System> Oracle> Central System> Migration - Target System Installation
TRACE [iaxxclib.cpp:165]
load()
Opened iamodora.dll
TRACE [iaxxccntrl.cpp:398]
CController::activateEvaluator()
The controller registered the module COraInputChecker
TRACE [iaxxclib.cpp:165]
load()
Opened iamodada.dll
TRACE [iaxxccntrl.cpp:398]
CController::activateEvaluator()
The controller registered the module CIaSdbActor
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|fillContext
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
t_J2EE_SystemCopy.remove(WHERE 1=1)
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
t_J2EE_SystemCopy.insertRow(), inserting
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step fillContext with key J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|fillContext has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|requestCDs
TRACE [cdxxccdcli.cpp:202]
CCdClientImpl::makeSomePackagesAvailable
CD Client for Component J2EE_SystemCopy|ind|ind|ind|ind|ind
TRACE [iaxxgenimp.cpp:189]
showDialog()
showing dlg diCdServerWithCdName
TRACE [iaxxgenimp.cpp:205]
showDialog()
<dialog sid="diCdServerWithCdName">
<dialog/>
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE [iaxxgenimp.cpp:212]
showDialog()
<dialog sid="diCdServerWithCdName">
<dialog/>
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step requestCDs with key J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|requestCDs has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|readSourceProperties
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
Instance name of source CI is 'JC00', J2EE standalone is 'true'. The following J2EE applications were installed on the source system: portal,kmc.
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step readSourceProperties with key J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|readSourceProperties has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|updateApplTable
INFO 2007-07-17 14:29:41
CJSlibModule::writeInfo_impl()
This SAPinst Java System Copy is Property File Version : 1.11
TRACE [synxcsyinf.cpp:92]
CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
INFO 2007-07-17 14:29:41
CJSlibModule::writeInfo_impl()
This SAPinst EXE uses OS Build Version : I386
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
TRUE Case 3
INFO 2007-07-17 14:29:41
CJSlibModule::writeInfo_impl()
This SAPinst XML is DB Build Version : ora
TRACE [iaxxgenimp.cpp:189]
showDialog()
showing dlg d_sysCopyEnterSimpleMigrationKey
TRACE [iaxxgenimp.cpp:205]
showDialog()
<dialog sid="d_sysCopyEnterSimpleMigrationKey">
<dialog/>
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO 2007-07-17 14:53:00
CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE [iaxxdlghnd.cpp:322]
CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:101]
CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:187]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO 2007-07-17 14:53:58
CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE [iaxxdlghnd.cpp:322]
CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:101]
CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:187]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO 2007-07-17 14:54:01
CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE [iaxxdlghnd.cpp:322]
CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:101]
CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:187]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO 2007-07-17 14:54:07
CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE [iaxxdlghnd.cpp:322]
CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:101]
CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:187]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO 2007-07-17 14:54:12
CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE [iaxxdlghnd.cpp:322]
CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:101]
CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:187]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO 2007-07-17 14:54:17
CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE [iaxxdlghnd.cpp:322]
CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:101]
CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:187]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO 2007-07-17 14:54:22
CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE [iaxxdlghnd.cpp:322]
CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:101]
CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:187]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO 2007-07-17 14:54:29
CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE [iaxxdlghnd.cpp:322]
CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:101]
CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:187]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO 2007-07-17 14:54:34
CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE [iaxxdlghnd.cpp:322]
CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:101]
CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:187]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO 2007-07-17 14:54:38
CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE [iaxxdlghnd.cpp:322]
CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:101]
CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:187]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO 2007-07-17 14:54:42
CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE [iaxxdlghnd.cpp:322]
CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:101]
CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:187]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO 2007-07-17 14:54:46
CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE [iaxxdlghnd.cpp:322]
CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:101]
CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:187]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO 2007-07-17 14:54:50
CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE [iaxxdlghnd.cpp:322]
CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
kindly help me out
regards
shoebhello David
yes
source CI & DB are on same hosts
while destination CI & DB are on same hosts
i donno why its not accepting the key... m giving the source & destination parameters exactly the same while generating the key
is that can we migrate a 64 bit system to a 32 bit system ?
kindly help
thx
regards
shoeb -
SAP DEV migration process error
Hi all,
SAP DEV migration process error.Error Details:
Source system
SAP ECC6.0 SR2
DB: DB2.9.1.4
OS: AIX 5.3
Target system
SAP ECC6.0 SR2
DB: DB2.9.1.4
OS: SUSE 10 64 Bit
ERROR 2008-11-13 07:41:06
CJSlibModule::writeError_impl()
CJS-30023 Process call '/usr/sap/DEV/SYS/exe/run/dipgntab -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT' exits with error code 126. For details see log file(s) dipgntab.log.
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-11-13 07:41:06 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step adjustNametab with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_DB6|ind|ind|ind|ind|5|0|adjustNametab was executed with status ERROR .
TRACE [iaxxgenimp.cpp:719]
showDialog()
<html><head></head><body><p>An error occurred while processing service <b>SAP ERP 2005 Support Release 2 > Additional Software Life-Cycle Tasks > System Copy > IBM DB2 for Linux, UNIX, and Windows > Target System > Central System > Based on AS ABAP and AS Java > Central System Installation</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>/tmp/sapinst_instdir/ERP/LM/COPY/DB6/SYSTEM/CENTRAL/AS/</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:1155]
showDialog()
waiting for an answer from gui
dipgntab.log
/usr/sap/DEV/SYS/exe/run/dipgntab: /usr/sap/DEV/SYS/exe/run/dipgntab: cannot execute binary fileHi,
1. please check if /usr/sap/DEV/SYS/exe/run/dipgntab exists or not ?
2. Does it have executable permissions?
3. Does your user have authorization to execute it?
4. if you executed dipgntab manually, does it work ?
Regards,
Vincent -
System copy stuck on "Import ABAP" with "Invalid Migration Key"
Dear Team,
I'm performing a system copy from AS400/DB2 (of our ECC DEV) to AIX/DB2. Export has been completed successfully, while importing it is stuck on the "Import ABAP" phase with error "Invalid Migration Key". However the key is generated with correct parameters only and even we have tried the key from SAP NOTE: 1768158 but of no use.
Below is brief about systems environment:
Source System
OS : AS/400 (IBM i-Series V6R1)
DB : DB/400 (Integrated DB with IBM i)
NW: NW 7.00 ( ECC 6.0 with SP11)
Target System
OS : AIX 7.1
DB: DB2 10.1 with FP3
NW: NW 7.00 ( ECC 6.0 with SP11)
The process is being performed using SWPM SP05
Kindly find the test_MIGKEY.log for analysis and let me know if any ideas.
Thanks in advance,
SUJITI found below error , are you doing this in distributed environment ?
Is source and target kernels are same ?
Found error in the log.
DbSl Trace: DbSlConnect to 'ECT' as 'sapect' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'ECT' as 'sapect' failed
(DB) ERROR: DbSlErrorMsg rc = 29
ERROR: invalid migration keybut the system wrote other errors instead, for example, (DB) ERROR: db_connect rc = 256, this does not involve an incorrect migration key. The errors should refer here to the actual cause (for example, the connect to the DB does not work). In this case, first check the database connect with the command <Z2 R3trans -x or R3load -testconnect, that must be executed as <sid>adm.Also make sure that the R3load that is used during the export and import has the same kernel release (for example, 7.00). You can check the relevant version of the R3load using 'R3load -version'.
=================== -
Migration Monitor error during Het. Sys Copy
We are doing an Het. Sys Copy from Aix-Orcle to Win IA64-Oracle using the standard indipendent procedure (export-import), on an Abap only instance.
During the import we got errors for the wrong migration key, despite it seemed well generated and we applied at the end the note 970518 point "D019527, 09/MAY/06".
Anyway after a bit the import process stopped due this error and we do not how what's went wrong:
" Execution of the command "C:\j2sdk1.4.2_04\bin\java.exe -classpath
migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType
ORA -importDirs E:\Iveco_export\TS1\ABAP -installDir "C:\Program
Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP" -
orderBy "" -r3loadExe E:\usr\sap\TS1\SYS\exe\uc\NTIA64\R3load.exe -
tskFiles yes -extFiles yes -migrationKey 1G5fdEM50T1IrBzjt6TE5Pae -
dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -
stop_on_error" -trace all -sapinst" finished with return code 128.
Output: java version "1.4.2_04"Java(TM) 2 Runtime Environment, Standard
Edition (build 1.4.2_04-b05)Java HotSpot(TM) 64-Bit Server VM (build
1.4.2_04-b05, mixed mode)
ERROR 2007-06-21 08:33:44
CJS-30022 Program 'Migration Monitor' exits with error code 128. For
details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-06-21 08:33:44
FCO-00011 The step runMigrationMonitor with step key
|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was
executed with status ERROR .
byeIf you post logfiles, please put "code tags" around, this makes your logs readable.
If you read what you posted you will find:
> ERROR Import Monitor jobs: running 0, waiting 1, completed 17, failed 1, total 19. ERROR 2009-03-31 18:14:16 CJSlibModule::writeError_impl() CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
Do that.
Markus -
Migration key w/ unicode conversion only
hello - i'm doing a unicode conversion of a NW04 system, following the Unicode conversion guide point by point for the proces.
source: nw04 / ora10202 / hpux ia64 (non-unicode)
target: nw04 / ora10202 / hpux ia64 (unicode)
the import is failing bc it says the migration key is not good. the guide didn't even mention the need for the key and i was not expecting to have to use one since the OS/DB remain the same on the target system. any ideas?
==
from the MIGKEY.log file -
/sapmnt/LH7/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
/sapmnt/LH7/exe/R3load: version R6.40/V1.4 [UNICODE]
/sapmnt/LH7/exe/R3load -dbcodepage 4102 -i /tmp/sapinst_instdir/NW04/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPUSER.cmd -l MIGKEY.log -K
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12154
DbSl Trace: CONNECT failed with sql error '12154'Hi Ben,
This looks more like a Oracle Error and not a Migration key related error.
I think its TNS Related, please check the following URL:
/thread/361384 [original link is broken] -
Dear expert
I am import sap system through system copy methored
during starting of ABAP Import phase it's prompt me to enter Migration key I gave it but it say's Invalid
/usr/sap/DEV/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/DEV/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140301123959
/usr/sap/DEV/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140301125743
/usr/sap/DEV/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#2 $ SAP
/usr/sap/DEV/SYS/exe/uc/rs6000_64/R3load: version R7.40/V1.7 [UNICODE]
Compiled Apr 10 2013 20:36:43
/usr/sap/DEV/SYS/exe/uc/rs6000_64/R3load -dbcodepage 4102 -i test_MIGKEY.cmd -l test_MIGKEY.log -K 1gQgf5M50Dv01eqtfaQy3A96
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF16
(GSI) INFO: dbname = "DEV20140301090313 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "ERPDEV "
(GSI) INFO: sysname = "AIX"
(GSI) INFO: nodename = "ERPDEV"
(GSI) INFO: release = "1"
(GSI) INFO: version = "7"
(GSI) INFO: machine = "000D94DBD400"
(VK) INFO: installation number = "0020599121"
(VK) ERROR: invalid migration key
/usr/sap/DEV/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/DEV/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140301125743
source IBM DB2 for UNIX and Windows
target oracle
regardsThanks all for support and guidance
following is the source system SAPAPPL0.log information
_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/C42/DVEBMGS10/exe/R3load: version R7.40/V1.8 [UNICODE]
Compiled Jul 23 2013 21:07:34
/usr/sap/C42/DVEBMGS10/exe/R3load -e SAPAPPL0_1_1.cmd -datacodepage 4102 -l SAPAPPL0_1_1.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: Export without hintfile
(GSI) INFO: dbname = "C42 "
(GSI) INFO: vname = "DB6 "
(GSI) INFO: hostname = "UNKNOWN "
(GSI) INFO: sysname = "AIX"
(GSI) INFO: nodename = "slcmin"
(GSI) INFO: release = "1"
(GSI) INFO: version = "6"
(GSI) INFO: machine = "000F5D41D900"
(GSI) INFO: instno = "0020599121"
I am unable to understand why (GSI) INFO: hostname = "UNKNOWN "
as per sap note 1519000 - ERROR: invalid migration key
" In the installation directory, a MIGKEY.log or test_MIGKEY.log is written at the same time. If the entry
(VK) ERROR: invalid migration key
is to be found here at the end of the log file, the migration key is incorrect. In this case, you must ensure that you have generated the migration key under the alias service.sap.com/migrationkey for the installation number of the source system. The information relating to OS, DB and so on is required for statistical purposes, but is not used for generating the migration key. "
can I create installation number of the source system in my portal then generate migration key from that installation number ?
Regards -
Wrong migration key - installation number 00000000
Hi gurus,
Im trying to migrate SAP ERP EHP7 from MaxDB to DB2 database and while import ABAP phase I received error, that migration key is wrong. I was generating key via OSS, but it is always wrong. In log file I see something weird:
process id 3722
(DB) INFO: connected to DB
(GSI) INFO: dbname = "NAO "
(GSI) INFO: vname = "DB6 "
(GSI) INFO: hostname = "UNKNOWN "
(GSI) INFO: sysname = "Linux"
(GSI) INFO: nodename = "bpx-nao"
(GSI) INFO: release = "3.0.13-0.27-default"
(GSI) INFO: version = "#1 SMP Wed Feb 15 13:33:49 UTC 2012 (d73692b)"
(GSI) INFO: machine = "x86_64"
(VK) INFO: installation number = "0000000000"
(VK) ERROR: invalid migration key
/usr/sap/NAO/SYS/exe/uc/linuxx86_64/R3load: job finished with 1 error(s)
/usr/sap/NAO/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20140825185045
I think that this is the problem, how can I solve it?
Thanks in advanceHi Martin,
Have you tried the above note and checked other parts to troubleshoot.
Also, can you check this note that you generated the key correctly.
317096 - Migration Key Generation for ABAP Systems
Also, please share test_MIGKEY.log or MIGKEY.log file
Regards,
Divyanshu -
Invalid migration key during DMO pre-processing
Hi experts,
I'm using DMO to upgrade and migrate my current system to HANA. I have encountered error during pre-processing phase which is caused by invalid migration key entered during the initial configuration steps.
I'm just wondering if there's any workaround (eg. config file which can be edited etc.) so that the tool will capture the new migration key, instead of having to reset the upgrade?
Thanks,
HenryHi Yilu,
I have tried many possible workaround, but I ended up redo from beginning.
Let me know if you manage to find an alternative. =)
Thanks,
Henry -
Application Translation Not Working - Primary Key Error
I had created an application translation to Spanish but it wasn't displaying my Spanish translation. I was going to try and redo it so I tried creating a new mapping and then seeding the translatable text. I got a primary key error "ORA-20001: Seed insert error: WWV_FLOW_TOPLEVEL_TABS.TAB_TEXT ORA-00001: unique constraint (FLOWS_030100.WWV_FLOW_TRANSLATABLE_TEXT_PK) violated".
I went in and deleted what I had done through APEX for this app and tried to create a new application but still get the primary key error when I try to seed it. I gave it a new translated application ID but that doesn't seem to help. Anyone have this problem or no of the reason I'm having this issue?
Thanks.Hi David,
Thanks for reporting this. This was an interesting problem to solve.
As it turns out, it was a logic error in Application Express (i.e., bug). When deleting a translation mapping, the associated strings in the translation repository would be deleted for that application, but if and only if you had actually published the application.
I think this is why you could never get Spanish working properly - you had never actually published the application the first time. So I'll bet what you did is deleted the original mapping, then you recreated the mapping for the same language but with a different translated application ID. Since you had never published the application from the original translation mapping, and there were orphaned rows in the translation repository, you encountered a "collision" when you tried to seed the second time with the different translated application ID.
Your action of deleting rows from WWV_FLOW_TRANSLATABLE_TEXT$ cleaned up these orphaned rows. As you stated, this isn't recommended to perform DML on the underlying APEX tables. A couple alternatives could have been:
1) Before deleting the translated application mapping, actually publish the application and then delete the mapping.
2) If you had deleted the mapping already, you could recreate the mapping for the same language and with the original translated application ID. Then, publish the application and then go back and delete the mapping.
I realize all this sounds crazy. But it was only an issue because you had not actually published the application. Not your fault, though, as this is a bug in APEX.
This bug will be fixed in Application Express 4.0. This way, you won't have to worry about if you published or didn't publish. The orphaned rows will be cleaned up when you delete a mapping.
Thanks again for reporting this.
Joel -
When the updater notified me of an iTunes update, I selected the update option. The update failed and killed the version I was running. I have tried for a year to fix the problem without sucess. I can't completely remove all Apple products. I can not install any apple products especially iTunes which is the only one I am interested in.
When I install iTunes now I get a registry key error similar to this:
I am using a machine where I am the only user and am the Admin. I have looked at the security settings on this key and see nothing wrond with it or the parent keys. I tried removing all apple products but ran into similar problems. At this time I still have Bonjour. Mobile Device Support, Software Update, and Application Support installed.These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time? -
How do I view Migrate Data errors - Access 2003 - Oracle 10g
I'm trying to use the SQL Developer to migrate data from an Access 2003 database to an Oracle 10g database. I followed the instructions found here:
http://www.oracle.com/technology/tech/migration/workbench/files/omwb_getstarted.html
I was able to complete every step except the actual data move. I exported the xml for the Access database, I captured the export and then ran the generation scripts on my target Oracle database (I'm using the same schema for the migration repository and the actual data). It created the tables with only one or two errors which I resolved.
Now, when I select Migration->Migrate Data, I get the dialog that appears to start 4 or 5 threads and attempts to migrate each table. They all error and do not transfer any rows. I can see that there's one error per table, but I can't see the error text. I just know that an error occurred. Is there a log somewhere or is the error displayed somewhere else? How do I know what's gone wrong?
Thanks.I too receive unexplained error counts using the Migrate Data menu selection and unexplained failures using the Generate Data Move Scripts menu selection. Permissions granted by role or direct grants should not be a problem, but a Migrate Data error appears in the Migration Log panel at the bottom of the SQL Developer window, "Failed to disable constraints: ORA-00942 ... ". No further details available on what constraints or why the error. No other errors were detected while following the instructions found in the Oracle SQL Developer Migration Workbench Getting Started guide. SQL Developer never migrates the data from the existing Access 2000 mdb file to the newly created schema objects in Oracle 10g using either method. The following roles and privileges have been granted to both the repository owner and the target schema owner:
GRANT RESOURCE TO MIGRATE_USER WITH ADMIN OPTION;
GRANT CONNECT TO MIGRATE_USER WITH ADMIN OPTION;
ALTER USER MIGRATE_USER DEFAULT ROLE ALL;
-- 25 System Privileges for MIGRATE_USER
GRANT CREATE ROLE TO MIGRATE_USER;
GRANT ALTER TABLESPACE TO MIGRATE_USER;
GRANT ALTER ANY SEQUENCE TO MIGRATE_USER;
GRANT INSERT ANY TABLE TO MIGRATE_USER;
GRANT SELECT ANY TABLE TO MIGRATE_USER;
GRANT CREATE ANY TABLE TO MIGRATE_USER;
GRANT UNLIMITED TABLESPACE TO MIGRATE_USER WITH ADMIN OPTION;
GRANT DROP TABLESPACE TO MIGRATE_USER;
GRANT CREATE ANY TRIGGER TO MIGRATE_USER;
GRANT ALTER ANY ROLE TO MIGRATE_USER;
GRANT CREATE VIEW TO MIGRATE_USER WITH ADMIN OPTION;
GRANT DROP USER TO MIGRATE_USER;
GRANT CREATE TABLESPACE TO MIGRATE_USER;
GRANT GRANT ANY ROLE TO MIGRATE_USER;
GRANT CREATE ANY SEQUENCE TO MIGRATE_USER;
GRANT ALTER ANY TABLE TO MIGRATE_USER;
GRANT DROP ANY TRIGGER TO MIGRATE_USER;
GRANT DROP ANY ROLE TO MIGRATE_USER;
GRANT DROP ANY SEQUENCE TO MIGRATE_USER;
GRANT UPDATE ANY TABLE TO MIGRATE_USER;
GRANT ALTER ANY TRIGGER TO MIGRATE_USER;
GRANT COMMENT ANY TABLE TO MIGRATE_USER;
GRANT DROP ANY TABLE TO MIGRATE_USER;
GRANT CREATE PUBLIC SYNONYM TO MIGRATE_USER WITH ADMIN OPTION;
GRANT CREATE USER TO MIGRATE_USER WITH ADMIN OPTION;
-- 1 Tablespace Quota for MIGRATE_USER
ALTER USER MIGRATE_USER QUOTA UNLIMITED ON USERS;
Operating system for both Access 2000 and Oracle 10g is Windows XP PRO SP2.
Oracle SQL Developer is version 1.1.2.25 build MAIN-25.79 on Windows XP PRO SP2. All three are on the same PC.
Since only the last step failed, I created a User DSN with the ODBC administrator. Then, linked the newly created Oracle table to Access via ODBC using the DSN created. Next, I created an append query with the source being the Access table and the target being the Oracle table. I moved the data by pressing the red exclamation mark. -
Hi,
I get an error by using the Email Migration Tool Error with OCS Release 2 on a Linux RH AS 2.0 single box server:
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/mail/migration/migrate/Migrate
Command:
$ORACLE_HOME\bin\migrate.sh
Please help.
Bob de LeeuwI had an 9.2 database already installed on my laptop. I installed the migration tool in c:\oracle\ora92\oes\migration and set ORACLE_HOME=c:\oracle\ora92.
-
Invalid API Key Error in Ecosign API
I'm using the sample soap code(Developer kit) given by echosign api for testping, but it always show invalid api key error while i'm executing from terminal. Please give the solution as soon as possible, and i'm not able to get solution from google also.
This is my API Key:
Client Secret:
6IaJHev8N48JbsZcM4Itggzt0pAHF0iS
I tried with this comment in terminal:
php demo.php https://secure.echosign.com/services/EchoSignDocumentService20?wsdl 6IaJHev8N48JbsZcM4Itggzt0pAHF0iS test
This is demo.php file:
<?php
// get input
array_shift($_SERVER['argv']);
$Url = array_shift($_SERVER['argv']);
$ApiKey = array_shift($_SERVER['argv']);
$cmd = array_shift($_SERVER['argv']);
$params = $_SERVER['argv'];
if (!$cmd) print_usage();
$S = new SOAPClient($Url);
call_user_func("cmd_$cmd", $params);
function cmd_test() {
global $Url, $ApiKey, $S;
print "Testing basic connectivity...\n";
$r = $S->testPing(array('apiKey' => $ApiKey));
print "Message from server: {$r->documentKey->message}\n";
print "Testing file transfer...\n";
$text = file_get_contents('../test.pdf');
$r = $S->testEchoFile(array('apiKey' => $ApiKey, 'file' => base64_encode($text)))->outFile;
if (base64_decode($r) === $text) {
print "Woohoo! Everything seems to work.\n";
else {
die("ERROR: Some kind of problem with file transfer, it seems.\n");
function cmd_send() {
global $Url, $ApiKey, $S;
list($filename, $recipient) = reset(func_get_args());
$r = $S->sendDocument(array(
'apiKey' => $ApiKey,
'documentCreationInfo' => array(
'fileInfos' => array(
'FileInfo' => array(
'file' => file_get_contents($filename),
'fileName' => $filename,
'message' => "This is neat.",
'name' => "Test from SOAP-Lite: $filename",
'signatureFlow' => "SENDER_SIGNATURE_NOT_REQUIRED",
'signatureType' => "ESIGN",
'tos' => array( $recipient ),
print "Document key is: {$r->documentKeys->DocumentKey->documentKey}\n";
function cmd_info() {
global $Url, $ApiKey, $S;
list($doc_key) = reset(func_get_args());
$r = $S->getDocumentInfo(array('apiKey' => $ApiKey, 'documentKey' => $doc_key))->documentInfo;
print "Document is in status: {$r->status}\n";
print "Document History: ";
foreach($r->events->DocumentHistoryEvent as $_) {
$keytext =
$_->documentVersionKey
? " (versionKey: {$_->documentVersionKey})"
print "{$_->description} on {$_->date}$keytext\n";
print "Latest versionKey: {$r->latestDocumentKey}\n";
function cmd_latest() {
global $Url, $ApiKey, $S;
list ($doc_key, $filename) = reset(func_get_args());
$r = $S->getLatestDocument(array('apiKey' => $ApiKey, 'documentKey' => $doc_key))->pdf;
//$r = base64_decode($r);
file_put_contents($filename, $r);
function print_usage() {
die(<<<__USAGE__
Usage:
demo.php <URL> <API key> <function> [parameters]
where the function is one of:
test
send <filename> <recipient_email>
info <documentKey>
latest <documentKey> <filename>
test will run basic tests to make sure you can communicate with the web service
send will create a new agreement in the EchoSign system, and returns a documentKey
info returns the current status and all the history events for a given documentKey
latest saves the latest version of the document as a PDF with the given filename
__USAGE__
-------------------------- End of file ---------------------------------------------------------------This is my API Key:
Client Secret:
6IaJHev8N48JbsZcM4Itggzt0pAHF0iS
Client secret is not the same as an api key!
in addition to the above, integration key or access codes can be had by going to personal preferences>access code and clicking the plus sign.
Maybe you are looking for
-
How can I remove an old Email address in easy steps please
I have closed my AOL email account but cannot see a way of removing it from Thunderbird so keep getting the no access messages at start up. everything else is ok.
-
A web service that never replies...
Hi! I write a java web service client that sends a soap message to a JAXMServlet that never replies. This is the simple client that sends a soap message and waits for the response: import java.net.*; import java.util.*; import javax.xml.soap.*; publi
-
Is there anybody that knows how to interrupt xalan when processing. There is a method stopTransformation() but it is not implemented There are transformations running for a very long time(20 min) giving 100% load and i want to interrupt them. It is f
-
Computer Crash when adobe Premiere Element 7.0 start
Dear all, I'm the owner of an Adober Premiere element 7.0 sw (bundled into Sony handycam sw suite). Unfortunatly, when launching the sw and during the loading of various module, the computer crash (meaning immediate hard reset with restart to bios...
-
1142 converted to LAP and VLANs
Hi, I just converted AP 1142 to LAP using the image "c1140-rcvk9w8-tar.124-21a.JA2.tar". The WLC is a 5500 with 2 NIC : one on 192.168.0/24, one on a specific vlan 10.20/16 The main management interface is on 192.168/24 but we defined as management t