Migration key problems

Hi All,
We just got our Discovery System and did the initial set up using the Quick Guide.
Just having some problems with the migration key.
Had applied license(Netweaver type) as suggested by the quick guide, but the migration key that was generated and sent to us didnt seem to work.
Then came to know(through SAP) that R/3 kind of licnese needs to be applied, so did that too. But unfortunately the new migration doesnt work either.
Has anyone faced this kind of problem?? Or any hint as to what has gone wrong.
Any help is appreciated.
Thanks in advance
Regards
Sunita

What was the solution provided by SAP that solved your issue? Thanks

Similar Messages

Migration Key - How to Open a CSS Message

Hi Team,
We got the discovery system and asked SAP to get us a separate licence for mySAP ERP 2005. We got the CD-DVD's and SAP says that we can generate the licence key from the service marketplace. Now in the installation guide, it is mentioned that we should get the migration key by using CSS and opening a message in CSS Component: CA-SOA-DS. When I go the tab "Report Product Error" in CSS, the table control which displays the systems is still blank. I cannot go to the next step and open a message to request migration key. We really don't want to install the CD-DVD's on a separate server. We just want to get the discovery system up and running and it looks like without the migration key we can't proceed further.
Questions:
1) How do I start a CSS message without the system number getting displayed in the service marketplace. I have the installation number etc with me.
2) Do we have to install and run something else prior to asking for migration key?
Please respond as this is causing problems. Your help will be much appreciated.
Thanks

Hi Sachin,
I'll try to shine some light on the topic you brought up.
The Discovery System is shipped already pre-installed on the hardware. Thus there are no CD-DVD's that would allow installation on a seperate system. It follows the concept of an appliance.
To license it you need to have a valid license for SAP ERP on MS SQL. This is the installation number you will need to request the license key from Service Marketplace. If you don't have that in place (no license or on different DB) please contact your SAP counterpart.
Following the steps in the Quick Guide (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b22d4e44-0e01-0010-ffa4-fe9c59939e5e) in sequence should guide you through all the necessary activities.
Hope that helps,
rAimund

Wrong migration key - installation number 00000000

Hi gurus,
Im trying to migrate SAP ERP EHP7 from MaxDB to DB2 database and while import ABAP phase I received error, that migration key is wrong. I was generating key via OSS, but it is always wrong. In log file I see something weird:
process id 3722
(DB) INFO: connected to DB
(GSI) INFO: dbname   = "NAO                                                                                                                             "
(GSI) INFO: vname    = "DB6                             "
(GSI) INFO: hostname = "UNKNOWN                                                         "
(GSI) INFO: sysname = "Linux"
(GSI) INFO: nodename = "bpx-nao"
(GSI) INFO: release = "3.0.13-0.27-default"
(GSI) INFO: version = "#1 SMP Wed Feb 15 13:33:49 UTC 2012 (d73692b)"
(GSI) INFO: machine = "x86_64"
(VK) INFO: installation number = "0000000000"
(VK) ERROR: invalid migration key
/usr/sap/NAO/SYS/exe/uc/linuxx86_64/R3load: job finished with 1 error(s)
/usr/sap/NAO/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20140825185045
I think that this is the problem, how can I solve it?
Thanks in advance

Hi Martin,
Have you tried the above note and checked other parts to troubleshoot.
Also, can you check this note that you generated the key correctly.
317096 - Migration Key Generation for ABAP Systems
Also, please share test_MIGKEY.log or MIGKEY.log file
Regards,
Divyanshu

Follow up to my Luma Key problem

Hi again,
Tom has answered to my Luma Key problem of bad quality by recomending me to put the oval form under my clip instead from above, and it worked verz well.
But now I have another problem, I want now my oval to cross disolve to have the full scene that is now under to come gradually fully on screen. I have a cross disolve at the begining and at the end of the oval. Its fine for the oval to come gradually from full black screen to an oval with behind the 2nd scene, but when it shall starts to disolve, nothing happens. I also try with the pen, adding points and then pulling down in order to have the oval clip gradually dissolving, but nothing works ! Any clue ?
Thanks,
Nic

Nicolas,
One way to do this is:
- Oval on V1
- Clip1 on V2 with Composite Mode > Travel Matte Luma
- Clip1 also on V3. Change it's opacity so it is 0 until the required number of frames before the end of the Oval. Then increase it's opacity to 100 at the end of the Oval.
There might be a more efficient way to do this.

Migration key : wrong : while importing

hello gurus
i am importing an export from source system to destination system
source system
os : HP-UX
ver: B 11.23
DB: oracle 9.2.0.6.0
target system
os: Win2000 advanced server
DB: oracle 9.2.0.6.0
its giving error in migration key
it says
" The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log. "
m attaching
property sheet
src.ci.sid=MYP
src.ci.instance.number=00
src.ci.instance.name=JC00
src.ci.host=sapux1
src.iaik.fullVersion=false
src.java.encrypt.policy=strong
src.export.version=1.11
src.j2ee.apps=portal,kmc
src.export.typeIsCopy=true
db.copyWithDBtools=false
src.db=b3Jh
src.os=SFBJQTY0
src.dt=V2VkIEp1bCAxMSAxNjoyNDo1MyBHTVQrMDUzMCAoSVNUKSAyMDA3
src.id=MTcyNzk\=
src.ap=U0FQX0pURUNIUyxTQVAtSkVFLFNBUC1KRUVDT1IsU0FQX0pURUNIRix6b29tdXAuc2NhLExNLVRP\nT0xTLE5XTUFETUlO
src.so=U3RhbmRhbG9uZQ\=\=
sapinst
INFO 2007-07-17 14:28:27
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2007-07-17 14:28:27
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2007-07-17 14:28:34
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.log to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.1.log.
INFO 2007-07-17 14:28:34
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.log to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.1.log.
INFO 2007-07-17 14:28:34
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\change.1.log.
INFO 2007-07-17 14:28:34
Removing file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\change.log.
INFO 2007-07-17 14:28:34
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\change.log.
INFO 2007-07-17 14:28:34
Output of change 'user' '/install' is written to the logfile change.log.
WARNING 2007-07-17 14:28:34
Execution of the command "change 'user' '/install'" finished with return code 1. Output:
This utility needs Terminal Services to be running.
INFO 2007-07-17 14:28:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'LTITEST\Administrator' on host '.'.
INFO 2007-07-17 14:28:35
File not found: [C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.956.1184662597/msvcp71.dll].
INFO 2007-07-17 14:28:35
File not found: [C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.956.1184662597/msvcr71.dll].
INFO 2007-07-17 14:28:36
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\summary.html.
PHASE 2007-07-17 14:28:36
Prepare the installation program.
INFO 2007-07-17 14:28:51
Installation start: Tuesday, 17 July 2007, 14:28:28; installation directory: C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\CENTRAL\ONE_HOST; product to be installed: SAP NetWeaver '04 Support Release 1> Java System> Oracle> Central System> Migration - Target System Installation
INFO 2007-07-17 14:29:41
This SAPinst Java System Copy is Property File Version : 1.11
INFO 2007-07-17 14:29:41
This SAPinst EXE uses OS Build Version : I386
INFO 2007-07-17 14:29:41
This SAPinst XML is DB Build Version : ora
INFO 2007-07-17 14:53:00
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:53:58
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:01
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:07
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:12
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:17
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:22
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:29
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:34
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:38
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:42
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:46
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
INFO 2007-07-17 14:54:50
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
sapinst_dev
TRACE      [iaxxccontrolfile.cpp:344]
           CControlFile::getMessageFilePath()
Running with messages from C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST
TRACE      [sapinst.cpp:306]
           CSapInst::initMessaging()
This is SAPinst, version 642, build 703609
compiled on Nov 21 2004, 22:48:58
TRACE      [sapinst.cpp:311]
           CSapInst::initMessaging()
Gui connected by user Administrator from host LTITEST
TRACE      [syxxsyshlp.cpp:133]
           syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
   = C:=C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\CENTRAL\ONE_HOST
ALLUSERSPROFILE = C:\Documents and Settings\All Users
APPDATA = C:\Documents and Settings\Administrator\Application Data
CommonProgramFiles = C:\Program Files\Common Files
COMPUTERNAME = LTITEST
ComSpec = C:\WINNT\system32\cmd.exe
HOMEDRIVE = C:
HOMEPATH = \Documents and Settings\Administrator
LOGONSERVER =
LTITEST
NUMBER_OF_PROCESSORS = 1
OS = Windows_NT
Os2LibPath = C:\WINNT\system32\os2\dll;
Path = D:\oracle\COE\ora92\jre\1.4.2\bin\client;D:\oracle\COE\ora92\jre\1.4.2\bin;D:\oracle\COE\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem
PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE = x86
PROCESSOR_IDENTIFIER = x86 Family 6 Model 8 Stepping 3, GenuineIntel
PROCESSOR_LEVEL = 6
PROCESSOR_REVISION = 0803
ProgramFiles = C:\Program Files
SAPINST_EXEDIR_CD = C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST
SystemDrive = C:
SystemRoot = C:\WINNT
TEMP = C:\DOCUME1\ADMINI1\LOCALS~1\Temp
TMP = C:\DOCUME1\ADMINI1\LOCALS~1\Temp
USERDOMAIN = LTITEST
USERNAME = Administrator
USERPROFILE = C:\Documents and Settings\Administrator
windir = C:\WINNT
User: LTITEST\Administrator, Id: S-1-5-21-329068152-1788223648-682003330-500
Working directory: C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\CENTRAL\ONE_HOST
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Increase quotas, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
Privilege SeUndockPrivilege, display name: Remove computer from docking station, enabled.
Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, enabled.
Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
TRACE      [synxcsyinf.cpp:92]
           CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
TRACE      [syxxsyshlp.cpp:143]
           syslib::logSystemState()
System information
==================
OS version, host name: Microsoft Windows NT [Version 5.0.2195 Service Pack 4] LTITEST
RAM size (MB): 2047.53
Swap size (MB): 4096
TRACE      [iaxxclientacceptor.cpp:124]
           CClientAcceptor::acceptImpl()
Running with control file C:/PROGRA1/SAPINS1/NW04SR1/WEBAS_~1/CENTRAL/ONE_HOST/control.xml version 642 and changelist 702011
TRACE      [iaxxccontrolfile.cpp:235]
           CControlFile::getDialogControlFileName()
Running with dialog control file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/dialog.xml
TRACE      [iaxxccontrolfile.cpp:184]
           CControlFile::getResourecFileName()
Running with resource file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/helppool.xml
INFO       2007-07-17 14:28:27 [syxxcfile.cpp:325]
           CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/keydb.xml to: q0w9e9r8t7.1.xml.
INFO       2007-07-17 14:28:27 [syxxcfile.cpp:446]
           CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/keydb.xml to: q0w9e9r8t7.1.xml.
TRACE      [iaxxclib.cpp:165]
           load()
Opened iaccdlib.dll
TRACE      [synxcsyinf.cpp:92]
           CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
TRACE      [synxcsyinf.cpp:92]
           CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
TRACE      [synxcsyinf.cpp:92]
           CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST
TRACE      [iaxxcdgprc.cpp:635]
           CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|changeUserInstall
TRACE      [iaxxclib.cpp:165]
           load()
Opened iamodos.dll
TRACE      [synxccuren.cpp:780]
           CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
INFO       2007-07-17 14:28:34 [syxxcfile.cpp:325]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.1.log, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.log to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.1.log.
INFO       2007-07-17 14:28:34 [syxxcfile.cpp:446]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.1.log, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.log to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/change.1.log.
INFO       2007-07-17 14:28:34 [synxcpath.cpp:834]
           CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\change.1.log.
INFO       2007-07-17 14:28:34 [synxcfile.cpp:152]
           CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\change.log.
TRACE      [iaxxejsexp.cpp:208]
           EJS_Installer::writeTraceToLogBook()
nodeType: 'UNKNOWN'
INFO       2007-07-17 14:28:34 [synxcpath.cpp:834]
           CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\change.log.
TRACE      [iaxxclib.cpp:165]
           load()
Opened iajsmod.dll
INFO       2007-07-17 14:28:34
           CJSlibModule::writeInfo_impl()
Output of change 'user' '/install' is written to the logfile change.log.
WARNING    2007-07-17 14:28:34
           CJSlibModule::writeWarning_impl()
Execution of the command "change 'user' '/install'" finished with return code 1. Output:
This utility needs Terminal Services to be running.
TRACE      [iaxxccntrl.cpp:493]
           CController::stepExecuted()
The step changeUserInstall with key Preinstall|ind|ind|ind|ind|ind|0|changeUserInstall has been executed successfully.
TRACE      [iaxxcdgprc.cpp:635]
           CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|AddPrivilege
TRACE      [synxccuren.cpp:780]
           CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE      [synxccuren.cpp:780]
           CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE      [iaxxclib.cpp:165]
           load()
Opened iamodnt.dll
TRACE      [ianxbusprv.cpp:288]
           CIaNtUserPrivileges::add_impl(., LTITEST\Administrator, SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege)
Ignored existing privilege: SeTcbPrivilege
TRACE      [ianxbusprv.cpp:288]
           CIaNtUserPrivileges::add_impl(., LTITEST\Administrator, SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege)
Ignored existing privilege: SeAssignPrimaryTokenPrivilege
TRACE      [ianxbusprv.cpp:288]
           CIaNtUserPrivileges::add_impl(., LTITEST\Administrator, SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege)
Ignored existing privilege: SeIncreaseQuotaPrivilege
INFO       2007-07-17 14:28:35 [ianxbusprv.cpp:337]
           CIaNtUserPrivileges::add_impl(., LTITEST\Administrator, SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege)
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'LTITEST\Administrator' on host '.'.
TRACE      [iaxxccntrl.cpp:493]
           CController::stepExecuted()
The step AddPrivilege with key Preinstall|ind|ind|ind|ind|ind|0|AddPrivilege has been executed successfully.
TRACE      [iaxxcdgprc.cpp:635]
           CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|replaceDLLs
INFO       2007-07-17 14:28:35
           CJSlibModule::writeInfo_impl()
File not found: [C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.956.1184662597/msvcp71.dll].
INFO       2007-07-17 14:28:35
           CJSlibModule::writeInfo_impl()
File not found: [C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.956.1184662597/msvcr71.dll].
TRACE      [synxcsyinf.cpp:92]
           CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
TRACE      [iaxxccntrl.cpp:493]
           CController::stepExecuted()
The step replaceDLLs with key Preinstall|ind|ind|ind|ind|ind|0|replaceDLLs has been executed successfully.
TRACE      [iaxxcdgprc.cpp:635]
           CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|registerEventsDll
TRACE      [synxcsyinf.cpp:92]
           CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
TRACE      [iaxxejsexp.cpp:208]
           EJS_Installer::writeTraceToLogBook()
C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.956.1184662597/sapinstevents.dll not found.
TRACE      [iaxxejsexp.cpp:208]
           EJS_Installer::writeTraceToLogBook()
E:/EP6Dump/WAS640InstMaster\IM01_NT_I386\SAPINST/NT/I386/sapinstevents.dll not found.
TRACE      [synxcfile.cpp:134]
           CSyFileImpl::getFileVersion()
file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/sapinstevents.dll has version 693717.642
TRACE      [synxcfile.cpp:134]
           CSyFileImpl::getFileVersion()
file C:/WINNT/system32/SAPinst/sapinstevents.dll has version 703609.642
TRACE      [syxxcfile.cpp:240]
           CSyFileImpl::copy(const CSyPath & C:/WINNT/system32/SAPinst/sapinstevents.dll, ISyNode::eCopyMode 545, ISyProgressObserver*) const
Did not copy file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_COPY/CENTRAL/ONE_HOST/sapinstevents.dll to: C:/WINNT/system32/SAPinst/sapinstevents.dll (source file version is not higher than target file version)
TRACE      [iaxxccntrl.cpp:493]
           CController::stepExecuted()
The step registerEventsDll with key Preinstall|ind|ind|ind|ind|ind|0|registerEventsDll has been executed successfully.
TRACE      [iaxxcdgprc.cpp:635]
           CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|diSummarize
TRACE      [iaxxccntrl.cpp:493]
           CController::stepExecuted()
The step diSummarize with key Preinstall|ind|ind|ind|ind|ind|0|diSummarize has been executed successfully.
TRACE      [iaxxcdgprc.cpp:635]
           CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|diProgress
TRACE      [iaxxccntrl.cpp:493]
           CController::stepExecuted()
The step diProgress with key Preinstall|ind|ind|ind|ind|ind|0|diProgress has been executed successfully.
INFO       2007-07-17 14:28:36 [synxcpath.cpp:834]
           CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\CENTRAL\ONE_HOST\summary.html.
PHASE      2007-07-17 14:28:36 [iaxxcwalker.cpp:416]
           CDomWalker::printPhaseInfo()
Prepare the installation program.
INFO       2007-07-17 14:28:51 [iaxxcwalker.cpp:59]
           CDomWalker::walk()
Installation start: Tuesday, 17 July 2007, 14:28:28; installation directory: C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\CENTRAL\ONE_HOST; product to be installed: SAP NetWeaver '04 Support Release 1> Java System> Oracle> Central System> Migration - Target System Installation
TRACE      [iaxxclib.cpp:165]
           load()
Opened iamodora.dll
TRACE      [iaxxccntrl.cpp:398]
           CController::activateEvaluator()
The controller registered the module COraInputChecker
TRACE      [iaxxclib.cpp:165]
           load()
Opened iamodada.dll
TRACE      [iaxxccntrl.cpp:398]
           CController::activateEvaluator()
The controller registered the module CIaSdbActor
TRACE      [iaxxcdgprc.cpp:635]
           CDialogProcessor::processDialogs()
Executing dialog step J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|fillContext
TRACE      [iaxxejsexp.cpp:208]
           EJS_Installer::writeTraceToLogBook()
t_J2EE_SystemCopy.remove(WHERE 1=1)
TRACE      [iaxxejsexp.cpp:208]
           EJS_Installer::writeTraceToLogBook()
t_J2EE_SystemCopy.insertRow(), inserting
TRACE      [iaxxccntrl.cpp:493]
           CController::stepExecuted()
The step fillContext with key J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|fillContext has been executed successfully.
TRACE      [iaxxcdgprc.cpp:635]
           CDialogProcessor::processDialogs()
Executing dialog step J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|requestCDs
TRACE      [cdxxccdcli.cpp:202]
           CCdClientImpl::makeSomePackagesAvailable
CD Client for Component J2EE_SystemCopy|ind|ind|ind|ind|ind
TRACE      [iaxxgenimp.cpp:189]
           showDialog()
showing dlg diCdServerWithCdName
TRACE      [iaxxgenimp.cpp:205]
           showDialog()
<dialog sid="diCdServerWithCdName">
<dialog/>
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE      [iaxxgenimp.cpp:212]
           showDialog()
<dialog sid="diCdServerWithCdName">
<dialog/>
TRACE      [iaxxccntrl.cpp:493]
           CController::stepExecuted()
The step requestCDs with key J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|requestCDs has been executed successfully.
TRACE      [iaxxcdgprc.cpp:635]
           CDialogProcessor::processDialogs()
Executing dialog step J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|readSourceProperties
TRACE      [iaxxejsexp.cpp:208]
           EJS_Installer::writeTraceToLogBook()
Instance name of source CI is 'JC00', J2EE standalone is 'true'. The following J2EE applications were installed on the source system: portal,kmc.
TRACE      [iaxxccntrl.cpp:493]
           CController::stepExecuted()
The step readSourceProperties with key J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|readSourceProperties has been executed successfully.
TRACE      [iaxxcdgprc.cpp:635]
           CDialogProcessor::processDialogs()
Executing dialog step J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|updateApplTable
INFO       2007-07-17 14:29:41
           CJSlibModule::writeInfo_impl()
This SAPinst Java System Copy is Property File Version : 1.11
TRACE      [synxcsyinf.cpp:92]
           CSySystemInfoImpl::CSySystemInfoImpl()
Could not find IsWow64Process in Kernel32 DLL. I assume we are not running under WOW64.
INFO       2007-07-17 14:29:41
           CJSlibModule::writeInfo_impl()
This SAPinst EXE uses OS Build Version : I386
TRACE      [iaxxejsexp.cpp:208]
           EJS_Installer::writeTraceToLogBook()
TRUE Case 3
INFO       2007-07-17 14:29:41
           CJSlibModule::writeInfo_impl()
This SAPinst XML is DB Build Version : ora
TRACE      [iaxxgenimp.cpp:189]
           showDialog()
showing dlg d_sysCopyEnterSimpleMigrationKey
TRACE      [iaxxgenimp.cpp:205]
           showDialog()
<dialog sid="d_sysCopyEnterSimpleMigrationKey">
<dialog/>
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO       2007-07-17 14:53:00
           CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO       2007-07-17 14:53:58
           CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO       2007-07-17 14:54:01
           CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO       2007-07-17 14:54:07
           CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO       2007-07-17 14:54:12
           CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO       2007-07-17 14:54:17
           CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO       2007-07-17 14:54:22
           CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO       2007-07-17 14:54:29
           CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO       2007-07-17 14:54:34
           CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO       2007-07-17 14:54:38
           CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO       2007-07-17 14:54:42
           CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO       2007-07-17 14:54:46
           CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
INFO       2007-07-17 14:54:50
           CJSlibModule::writeInfo_impl()
Return code of migration check : MTc5Z2RFTTUwVEwwMWVxdGRVMDBhYTQ=
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
The migration Key you entered is wrong, please enter the right one. If this fails constantly and you if you are sure to used the officially from SAP for this migration ordered key then remember to provide also as evidence the OS Build and DB Build Version information of the log, the Property file of the export and the Return code of the the migration key check from the log.
kindly help me out
regards
shoeb

hello David
yes
source CI & DB are on same hosts
while destination CI & DB are on same hosts
i donno why its not accepting the key... m giving the source & destination parameters exactly the same while generating the key
is that can we migrate a 64 bit system to a 32 bit system ?
kindly help
thx
regards
shoeb

Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
- I downloaded and installed the Windows Migration Assistant from Apple
- My Mac recognized PC and displays passcode
- The sasscode does not show / display on my PC
- My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
- Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
Any ideas? If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

How to import a Migration key in a Portal System.

Hi,
We have a Portal System (Only Java Stack) and we have changed the existing Installation number of the System to a new one in Marketplace. We have received a new License key and Migration Key from SAP. I have imported the License Key in the System using Visual Administrator tool - Licensing Adapter.
Now, i dont know what to do with Migration Key. In the Note 816861, it is only written about ABAP stack systems.
Please help.
Regards,
Mohan.

You don't need the migration key.. It's only for ABAP.
Kind regards,
Mark

Homogeneous System Copy asking Migration key

Hi All,
I am doing homogeneous system copy but in middle system show pop of asking migration key. As per sap doc system not ask migration key for homogeneous system copy.my scenario is
Source System : OS -          Windows 2003 Server Standard Edition
                         Database - IBM DB2 for Linux, Unix,and Windows
                          SAP -         ECC IDES IS Health Care SR2
Target System : OS -           Windows 2003 Server Standard Edition
                         Database - IBM DB2 for Linux, Unix,and Windows
                         SAP         - ECC IDES IS Health Care Sr2
Please help me / guide me.
Regards,
Kumar

If you are performing an Homogeneous System Copy, no migration key is
needed. The migration key is needed ONLY if you are changing your operating
system or your database version, that is, you are doing an Heterogeneous
System Copy.
Please read the installation guide carefully, if you do any pre-steps wrongly..i.e enter wrong parameters...
Vincent

System copy stuck on "Import ABAP" with "Invalid Migration Key"

Dear Team,
I'm performing a system copy from AS400/DB2 (of our ECC DEV) to AIX/DB2. Export has been completed successfully, while importing it is stuck on the "Import ABAP" phase with error "Invalid Migration Key". However the key is generated with correct parameters only and even we have tried the key from SAP NOTE: 1768158 but of no use.
Below is brief about systems environment:
Source System
OS : AS/400 (IBM i-Series V6R1)
DB : DB/400 (Integrated DB with IBM i)
NW: NW 7.00 ( ECC 6.0 with SP11)
Target System
OS : AIX 7.1
DB: DB2 10.1 with FP3
NW: NW 7.00 ( ECC 6.0 with SP11)
The process is being performed using SWPM SP05
Kindly find the test_MIGKEY.log for analysis and let me know if any ideas.
Thanks in advance,
SUJIT

I found below error , are you doing this in distributed environment ?
Is source and target kernels are same ?
Found error in the log.
DbSl Trace: DbSlConnect to 'ECT' as 'sapect' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'ECT' as 'sapect' failed
(DB) ERROR: DbSlErrorMsg rc = 29
ERROR: invalid migration keybut the system wrote other errors instead, for example, (DB) ERROR: db_connect rc = 256, this does not involve an incorrect migration key. The errors should refer here to the actual cause (for example, the connect to the DB does not work). In this case, first check the database connect with the command <Z2 R3trans -x or R3load -testconnect, that must be executed as <sid>adm.Also make sure that the R3load that is used during the export and import has the same kernel release (for example, 7.00). You can check the relevant version of the R3load using 'R3load -version'.
===================

Migration key error

I have a R/3 4.71 system, on AIX 5.1, oracle 9.2.0.3. I bought a new IBM SERVER pP 550. I need to migrate R/3 to this new server. I used system copy to export all data. but when I import it , Migration key always error, why ? I got key from service marketplay . help!

we didn't pay service pay for many years, so SAP can't help us. it always display " the migration key for heterogene systemcopy is wrong ! try again!

Migration Key for Unicode conversion

Hi,
I want to do a unicode conversion off ECC 6.0. The system was upgraded few days back from R/3 4.7 to ECC 6.0. Now it is required to convert the system to unicode. So to do the activity do we require Migration Key or any other approval from SAP for them to support us?
Thanks,
Suman

If you don't change the platform no migration key is required and no intervention or migration consultant necessary.
Depending on the number of languages/codepages it would probably make sense to get a Basis consultant (maybe remotely will be sufficient) to assist.
Markus

Migration key w/ unicode conversion only

hello - i'm doing a unicode conversion of a NW04 system, following the Unicode conversion guide point by point for the proces.
source: nw04 / ora10202 / hpux ia64 (non-unicode)
target: nw04 / ora10202 / hpux ia64 (unicode)
the import is failing bc it says the migration key is not good. the guide didn't even mention the need for the key and i was not expecting to have to use one since the OS/DB remain the same on the target system. any ideas?
==
from the MIGKEY.log file -
/sapmnt/LH7/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
/sapmnt/LH7/exe/R3load: version R6.40/V1.4 [UNICODE]
/sapmnt/LH7/exe/R3load -dbcodepage 4102 -i /tmp/sapinst_instdir/NW04/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPUSER.cmd -l MIGKEY.log -K
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12154
DbSl Trace: CONNECT failed with sql error '12154'

Hi Ben,
This looks more like a Oracle Error and not a Migration key related error.
I think its TNS Related, please check the following URL:
/thread/361384 [original link is broken]

I am running CC on Windows 7. My Control key is sticking only in PPS. It is not a sticky key problem

I am running CC on Windows 7. My Control key is sticking only in PPS. It is not a sticky key problem and I am not running any similar program.

yes, photoshop.
Col. 3:17
Sam Collins

'Keys' problem when trying to re install 10.2 on Power Mac G4

Have had my Power Mac G4 wiped clean prior to selling and am now trying to reinstall 10.2.
Install disc one reached the end of its loading process and then froze.
Install disc two did not respond when loaded.
Put install disc one back in while holding down 'C' key. Started to install but soon stopped.
Went to Disc First Aid > verify disc > 'keys out of order HD need repairing'.
Clicked 'repair disc' and indicated 'repair complete'.
Returned to 'verify disc' > HD needs repairing, key length too short.
Repaired once more, keys still out of order.
Removed Install disc one and loaded Disc Warrior.
Speed inhibited by malfunction stage 5 when rebuilding directory.
So with no full operating system loaded, how do we progress?

John:
"Keys problems" are directory issues which, if not repairable by Disk Utility need a third party package like Tech Tool Pro, DriveGenius, or Disk Warrior. However, in some cases the disk hardware may be damaged or the HDD may have failed and unable to hold the format. When in DU check the SMART status. Even if the SMART Status is Verified and the HDD is more than 3 years old you should consider replacement.
cornelius

Migration Key required

Hi All,
We are going to migrate SAP production server to other same sun solaris system due to hardware failure in existing system. We export all data from old system and import to new system. But when we trying to import, it asking about migration key, When we enter migration key which was get from SAP market place then system is not accepting the migration key. Following are system information :-
OLD SYSTEM:-
OS = sunsolaris 9.2.0
Database = Oracle
machine model = sun solaris V440
New SYSTEM:-
OS = sunsolaris 9.2.0
Database = Oracle
machine model = sun solaris V240
Regards,
Syed Tayab Shah

Dear All,
It is late because I was trying all of your concern. See following what happening:
1. When I am trying to leave migration key it is ok and I was go forward for futher steps, but system trying to load export data then it is asking again migration key and message appeared "Invalid Migration Key, Trying again.".
2. I tried that delete all data from oracle directory and but oracle directory is there. and tried reinstall again but again above message is appeared.
3. I thing that I was not tried and please suggest that SAP asking about the type of installation during installtion:
         a. standard installation
         b. system migrate with new database.
         c. system migrate with old database (I am not sure about text).
   I had never tried the standard installation. If I will can I try to export only database from backup and import into new SAP generated database? I dont know standard installation will ask migration key.
Regards,
Syed Tayab Shah.

Migration key problems

Similar Messages

Maybe you are looking for