Migration LMS 3.1 - 3.2, configuration lost

Hello,
After fresh installation of LMS 3.2 on new Win 2008 server, and data migration through backup/restore it seems that all device configs are lost.
Directory CSCOpx\files\rme\dcma is empty. Restore process was ended without errors, I think.
Regards,
Mladen

Hi,
Thanks for the clarification. I looked at the bug you mentioned. Have you implemented the recommended fix?
In the old version of CiscoWorks, Go to RME > Admin > Config Mgmt > Archive Settings
and adjust the path so that it contains '\' for the path delimiter. Then take a new backup.
[Wrap text] [Edit this enclosure]
Release-note: Added 08/09/2010 11:19:49 by jclarke
[Unwrap text] [Edit this enclosure]
Release-note: Added 08/09/2010 11:19:49 by jclarke
[Uwrap text] [Edit this enclosure]
20100804-122336_migration: Added 08/09/2010 11:19:51 by jclarke
20100804-122336_migration: Added 08/09/2010 11:19:51 by jclarkeCan not view this .log file attachment inline, please click on the following link to view the attachment.
http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCti28672&title=20100804-122336_migration&ext=log&type=FILE
20100804-122336_migration: Added 08/09/2010 11:19:51 by jclarkeCan not view this .log file attachment inline, please click on the following link to view the attachment.
http://
[UnWrap text] [Edit this enclosure]
20100804-122336_migration: Added 08/09/2010 11:19:51 by jclarke
[Wrap Text] [Edit this enclosure]
20100804-122336_migration: Added 08/09/2010 11:19:51 by jclarke
[Uwrap text] [Edit this enclosure]
Diff_Report_Aug_17_2010_2301: Added 08/17/2010 19:02:22 by px-build
Diff_Report_Aug_17_2010_2301: Added 08/17/2010 19:02:22 by px-buildCan not view this . file attachment inline, please click on the following link to view the attachment.
http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCti28672&title=Diff_Report_Aug_17_2010_2301&ext=&type=FILE
Diff_Report_Aug_17_2010_2301: Added 08/17/2010 19:02:22 by px-buildCan not view this . file attachment inline, please click on the following link to view the attachment.
http://
[UnWrap text] [Edit this enclosure]
Diff_Report_Aug_17_2010_2301: Added 08/17/2010 19:02:22 by px-build
[Wrap Text] [Edit this enclosure]
Diff_Report_Aug_17_2010_2301: Added 08/17/2010 19:02:22 by px-build
[Wrap text] [Edit this enclosure]
Diffs--rme4_3_1: Added 08/09/2010 11:19:50 by jclarke
Diffs--rme4_3_1: Added 08/09/2010 11:19:50 by jclarkeCan not view this . file attachment inline, please click on the following link to view the attachment.
http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCti28672&title=Diffs--rme4_3_1&ext=&type=FILE
Diffs--rme4_3_1: Added 08/09/2010 11:19:50 by jclarkeCan not view this . file attachment inline, please click on the following link to view the attachment.
http://
[UnWrap text] [Edit this enclosure]
Diffs--rme4_3_1: Added 08/09/2010 11:19:50 by jclarke
[Wrap Text] [Edit this enclosure]
Diffs--rme4_3_1: Added 08/09/2010 11:19:50 by jclarke
[Uwrap text] [Edit this enclosure]
RME-code-review: Added 08/18/2010 08:44:24 by cms
RME-code-review: Added 08/18/2010 08:44:24 by cmsCan not view this . file attachment inline, please click on the following link to view the attachment.
http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCti28672&title=RME-code-review&ext=&type=FILE
RME-code-review: Added 08/18/2010 08:44:24 by cmsCan not view this . file attachment inline, please click on the following link to view the attachment.
http://
[UnWrap text] [Edit this enclosure]
RME-code-review: Added 08/18/2010 08:44:24 by cms
[Wrap Text] [Edit this enclosure]
RME-code-review: Added 08/18/2010 08:44:24 by cms
[Uwrap text] [Edit this enclosure]
RME-code-review-2: Added 11/30/2010 06:48:22 by cms
RME-code-review-2: Added 11/30/2010 06:48:22 by cmsCan not view this . file attachment inline, please click on the following link to view the attachment.
http://cdetsweb-prd.cisco.com/apps/dumpcr_att?identifier=CSCti28672&title=RME-code-review-2&ext=&type=FILE
RME-code-review-2: Added 11/30/2010 06:48:22 by cmsCan not view this . file attachment inline, please click on the following link to view the attachment.
http://
[UnWrap text] [Edit this enclosure]
RME-code-review-2: Added 11/30/2010 06:48:22 by cms
[Wrap Text] [Edit this enclosure]
RME-code-review-2: Added 11/30/2010 06:48:22 by cms
Thanks.

Similar Messages

Will configuration lost if i use Recovery CD to fix file system in CUCM9.1.2?

Hi All,
I have new installation for BE6K, some services are not working after i run password recovery to reset securtiy password, i tried to do DRS backup and BAT, but both fail. if i use recovery iso to fix problem, will all configuration lost? any advoice is appriciated.
please see attached picture.

[+5] to Tony.
You can use Recovery Disk.Nothing is going to be lost.
I doubt this could be a bug
pwrecovery tool does not update the internal user passwords
CSCug92142
Description
Symptom:
Changing the security password using pwreset results in database replication going down.
file tail /cm/log/informix/ccm.log logs similar lines
09:05:12 Password Validation for user [dblpm] failed!
09:05:12 Check for password aging/account lock-out.
09:05:12 listener-thread: err = -952: oserr = 0: errstr = dblpm@CCM[CCM]: User (dblpm@CCM[CCM])'s password is not correct for the database server.
Conditions:
Fresh install of CM 9.1.1 or 9.1.1a
Change the security password using the pwrecovery method
Workaround:
Contact TAC for workaround
regds,
aman

Migrating from Marimba 8.1 to Configuration Manager 2012 R2

Good morning all,
I have been tasked with architecting a migration from Marimba 8.1 to Configuration Manager 2012 R2 and I noticed that there is almost no material available in the web about this, can someone provide whatever insight information possible?
Thanks in advanced for your help on this matter
Ed
edthefixer

Jeff,
I agree with you on some of your thoughts, I should've describe the situation better.... I am not trying to migrate anything from Marimba, I am architecting an entire ConfigMgr 2012 R2 infrastructure altogether, what I am trying to do is (because I have
to rationalize and normalize their DSL) see if I can salvage any applications and some level of their customization to convert them into ConfigMgr applications.... they have about 3000 apps and not all of them are in .msi format, Marimba uses a very strange
folder format for this.... trying to see if anyone out there has dealt with this before.
Ed
edthefixer

Splitting and migrating LMS

Due to growth of the network, I need to split a single LMS 3.2 server into two seperate machines (master-slave).
I've prepared two new (virtualized) window servers. installed a clean LMS 3.2 server1 (RME, CM) server 2 (DFM, IPM and HUM)
I've restored the previous backup on the new server1 (it says that application doesn't match but I continued restore CS, RME, CM)
I've restored the previous backup on the new server2 (same message, but I continued restore DFM, IPM and HUM)
Everything seems to work fine, except:
(my next step is to setup the master-slave, currently two standalone-servers)
server1:
compliancy management -> when I try to open a template, the following error occurs:
Problem with File /WEB-INF/screens/config/dcma/BaseLine/BaseLineViewer.jsp!!!nul
server2:
It won't let me to run the changehostname.pl perl script, old-hostname doesn't match the old-hostname
These are the only issues that I've seen for now... my question. Is this a supported procedure, if not, what's the best practice for splitting a server into multiple server i.e. a master/slave(s) setup.
thanks in advance for any help.

Problem with File /WEB-INF/screens/config/dcma/BaseLine/BaseLineViewer.jsp!!!nul
In the meantime I discovered that for the baseline templates that I have restored, the "Device Type" is missing.
When I add a new one, it works fine. So I can reproduce this error.
Question, how can I restore the "Device Types" in the baseline templates, for some reason this information is lost and causes this error
(I can't edit them via the GUI, so the solution should be editing some file(s) on the file system)

Dynamic configuration lost in BPM

Hi,
My scenario : File->BPM(with several transformation steps)->File.
I would like to use the the dynamic configuration to have the sender Directory and FileName on the receiver side.
The dynamic configuration segment in the SOAP Header is "lost" after the BPM.
Do you know why?
Thanks,
Bela

Hi Moorthy,
"lost" => In the SXMB_MONI I can see the Dynamic Configuration segment in the SOAP Header before the message in transfered to the BPM. After the BPM the SOAP Header doesn't contain any Dynamic Configuration Segment.
If there is no transformation step executed inside the BPM the Dynamic Configuration is not lost.
I'm asking myself if it is not related to the fact that the mappings in the BPM are not executed on the same runtime, so the header is initilized again.
Thanks,
Bela

Web configuration lost when upgrading to advanced server admin

Hello,
after setting correctly the basic configuration,and setting the web servives, we did the upgrade to advanced option and then we focues to other apple problems like getting network connection, starting xgrid,etc), and then is when we realized that the web settings, server name, etc were lost when we moved to the advanced server admin.
grrrrr!
any idea?
thanks

I would most emphatically recommend that you get your boss to sign off on you having no liability nor culpability for any results of work he expects you to do "on the side".
People study and learn for years - and appropriately so ! - in order to accomplish this kind of work effectively and efficiently.
If you are learning and have a non-production environment to work with and potentially wipe & reinstall where need be, then by all means, go for it (start learning).
But otherwise your boss should accept that s/he is getting what they're paying for, and since it is nothing, they should be prepared for that.
It is neither technically nor professionally advisable to foist a task such as this on someone and expect the result(s) to be that of a trained professional in that field. The fundamental concern is the disconnect there, and the unacceptable risk this situation could put you in, either now or in the future.
To the matter at hand, I generally recommend strongly against an upgrade, as compared to a (verified good) backup, wipe and reinstall and configure from the outset as "Advanced."
For computer management, you will want to run your server as an Open Directory Master,
and as such, you must must must have verified working DNS lookup(s) for your server's FQDN, prior to proceeding with re-installing & reconfiguring it.

LMS 3.2 not archiving configuration (Suspect SSH)

I have 8 devices added to RME 4.3.1 (LMS 3.2), 3 devices are running telnet and their configs are backed up fine. However the other 5 devices are running SSH and when i do sync archive, I get this message..
CM0151 PRIMARY STARTUP Config fetch failed for test-switch Cause: TELNET: Failed to establish TELNET connection to 10.150.208.7 - Cause: connect timed out.
Failed to fetch the configuration. Check the dcmaservice.log for details.
TFTP: Failed to fetch config using TFTP.
Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
I have added telnet ssh and tftp to the list of fetch protocols. Any suggestions on how I can go about troubleshooting this?

Sorry Joseph, I should have mentioned I checked them both without
finding much additional information.
This is the result of the device credentials check for the device in
question.
Device Name ReadCommunity Read WriteCommunity SNMPv3 Telnet Enable
by Telnet SSH Enable by SSH
test-sw2 Ok Ok No Value To Test Failed to connect. Did Not Try Ok(Primary
Successful) Ok(Primary Successful)
test-sw1 Ok Ok No Value To Test Failed to connect. Did Not Try Ok(Primary
Successful) Ok(Primary Successful)
I can install an SSH program on the LMS server and SSH to the device with
the credentails on the server straight into privileged mode and do show
running.
I have attached a sanitized version of the archive management debug for your
reference.
TIA
On Mon, Feb 7, 2011 at 12:40 AM, jclarke <

LMS 4.2 Network Devices configuration requirement

I have install LMS 4.2 and nat ip to discover found WS-6513 but cannot polling inventory.
I serch for document about configuration on Network Devices such as switch, router, asa etc. to support LMS.
But I cannot find it, anyone have example configuration or document about this ?

Given that you have verified the SNMP RO community string and assuming you have a Supervisor 720 as noted in the compatibility matrix, you should be able to pull inventory.
As a next step I would check what is going on when you actually try to retrieve inventory.
Go into Device Center for your switch and select Tools > Packet Capture. Create a capture using the IP address of your switch and choose application SNMP (udp161). Give it adequate time, say 10 minutes (600 seconds). then go back into Device Center and choose Tools, Update Inventory. Once the Job Browser indicates the job is done )or failed), go back into the Packet Capture Window and examine the traffic captured (the jet file can be opened in Wireshark).
A successful Inventory update consists of a series of get and get-bulk requests and associated get responses from the managed device. If it's failing, there should be some response early on in one of the frames from the capture.

AudioMIDI MIDI configuration lost - how to get back?

Hi,
For no appearent reason I have just lost my MIDI configuration. when i click on the Applications/Utilities/AudioMidi configuration icon, it bombs out. Aftet 5-6 atempts it appears, but with the MIDI setup empty and complete inability to test/rescam/add MIDI devices.
However, if I go into the application/Utilities folde and type press control-click and open properties, go into application contents and go into the MacOS folder, I find the same AudioMidi Icon in that folder as in the Utilities list. when i click on THAT icon I get a screen that shows all of my MIDI setup. But it look like its just a graphic, it does not 're-initialize' my MIDI setup.
Might anyone know what to do to fix this aspect of tte MacOS? I don't know enough about this os to fix it.
I'm not sure how to fix this as I only have 10.3 on DVD and I'm currently on 10.3.9, so its not clear how an install would fix this (without wiping my disk which is definitely the most undesirable option). Would an upgrade to 10.4 fix this?
thanks,
Kevin Nolan.

Hi sumitbarkhade91,
I'm sorry to hear that your laptop was stolen. I would suggest contacting HP directly for assistance. There is a process for stolen units that the support group will follow.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
*Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
* Click on "Purple Thumbs up" button to the left side of my post to say thanks!
Regards
Ahmed

Migration LMS 3.1 - 3.2, restore failed

Hello,
I'm trying to migrate from LMS 3.1 to 3.2, via backup/restore. When doing restore of LMS 3.1 backup on clean install of LMS 3.2 I got following error -
(copy/paste) from restorebackup.log:
[Mon Apr 11 13:39:48 2011] Copied directory....
[Mon Apr 11 13:39:48 2011]              From : [D:\CSCOpx\tempBackupData\dfm\CSCOpx\objects\dps\config]
[Mon Apr 11 13:39:48 2011]              To    : [D:\CSCOpx\objects\dps\config]
[Mon Apr 11 13:39:48 2011] INFO:    The folder D:\CSCOpx\tempBackupData\dfm\CSCOpx\objects\vhm\config\inventorycollector
[Mon Apr 11 13:39:48 2011]          Does not exist in archive, hence ignoring
[Mon Apr 11 13:39:48 2011] Successfully restored DFM data files.
[Mon Apr 11 13:39:48 2011] [ xcopy D:\CSCOpx\tempBackupData\dfm\CSCOpx\objects\smarts\conf\trapd D:\CSCOpx\objects\smarts\conf\trapd /E /O /Y /I ]
D:\CSCOpx\tempBackupData\dfm\CSCOpx\objects\smarts\conf\trapd\trapd.conf
D:\CSCOpx\tempBackupData\dfm\CSCOpx\objects\smarts\conf\trapd\trapd1.conf
2 File(s) copied
[Mon Apr 11 13:39:49 2011] Copied directory....
[Mon Apr 11 13:39:49 2011]              From : [D:\CSCOpx\tempBackupData\dfm\CSCOpx\objects\smarts\conf\trapd]
[Mon Apr 11 13:39:49 2011]              To    : [D:\CSCOpx\objects\smarts\conf\trapd]
[Mon Apr 11 13:39:49 2011] Successfully restored Trap data files on windows.
[Mon Apr 11 13:39:49 2011] Appending additional Trap Forwarding entry for Scaling support
"File Trapd.conf Exists"
Searching file "Trapd.conf" for the string "FORWARD: *.*.*.* .* * * localhost:9020" ...
FORWARD: *.*.*.* .* * * localhost:9020
The string "FORWARD: *.*.*.* .* * * localhost:9020" was found in file "Trapd.conf"
[Mon Apr 11 13:39:49 2011] Successfully appended additional Trap forwarding entry on windows
[Mon Apr 11 13:39:49 2011] doing data restore from dfm bkup version 3.1.3 to current version 3.2.0
[Mon Apr 11 13:39:49 2011] Restoring DFM DB...
root=D:\CSCOpx\databases\dfmFh\dfmFh.db
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
30% of DFM Restore completed
root=D:\CSCOpx\databases\dfmInv\dfmInv.db
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
[Mon Apr 11 13:40:13 2011]
Starting db engine for dfmInv
    Starting database engine dfmInvEng
INFO: Process created
INFO: Started the Database engine : dfmInvEng Retry 0
INFO: Started the Database engine : dfmInvEng Retry 1
INFO: Started the Database engine : dfmInvEng Retry 2
INFO: Started the Database engine : dfmInvEng Retry 3
INFO: Started the Database engine : dfmInvEng Retry 4
INFO: Getting message
INFO: Connect the database dsn=dfmInv
ERROR: Failed to start the database engine with old password: Database engine 'dfmInvEng' could not be started on database 'dfmInvDb' in Bulk mode..
[Mon Apr 11 13:40:57 2011]
Get connection handle dfmInv
[Mon Apr 11 13:41:11 2011]
ERROR testdb.pl:Couldn't connect to the database dfmInv
Regards,
Mladen

Rahul,
I think you have issues with your LMS 3.1 server which has been advsied in some other threads to upgrade to atleast LMS 3.2.1 which is free upgrade for you.
Using a End of support product will have consequenses of lack of support mostly. Let us know the challenges you have in upgrade.
People here in CSC can help and suggest solutions.
-Thanks
Vinod

(SOLVED) Tvheadend: Configuration lost on reboot

Hello.
I managed to configure Tvheadend on my computer and it works great.
My problem is when the computer restarts: For some reason the settings are lost on reboot and I have to configure everything again every time when I turn the computer on.
I save the changes when the program is configurated but the computer loses the settings at start.
Please, help me.
Last edited by Belgarath (2013-12-25 23:38:22)

I configured the program from the web interface and I can see the TV channels and the EPG information even from other computers on my network but curiously the program does not create the folder you mention,
I do not know why that folder is not created and I do not know where it saves the data.
The .hts folder does not appear anywhere in my home directory: It is not in ~/.hts and is not in ~/.config/.hts or similar places.
Should I create ~/.hts/tvheadend manually? If so, what should I put in that file?
Excuse me for my deficient english.

Upgrade SP09 to SP14 SLD and CMS configuration lost

Hi all,
I have upgraded the Java Infrastructure successfully, but I had to reconfigure the SLD (object server etc.) as well as the CMS track information in order to get the Infrastructure working again. Luckyly I only had a test track with test components set up otherwise I assume I would have lost my work.
Is this supposed to happen? I can't imagine that this is the way an upgrade for a development infrastructure should work. Somehow the configuration data should be stored and reimported after the upgrade.
Maybe I missed something during the upgrade regarding the preserving of the configuration data.
Has anyone made the same/a better experience during the JDI upgrade?
Any input is greatly appreciated.
BR Helga

Hi Helga,
I did several updates of NWDI yet and never had such a problem.
My updates
Java & ABAP Stack: SP07 --> SP09
Java Stack: SP09 --> SP11
Java Stack: SP09 --> SP12
Regards
Helmut

Trackpad configuration lost after session login

Hello,
I've esperienced the following problem. After login, the magic trackpad configuration is lost.
I have to go to system preferences then trackpad and click twice on one finger -> tap to click.
Does anyone experienced the same problem ?
Thanks for help
Franck
Config : Imac intel + lion

Hello,
I've esperienced the following problem. After login, the magic trackpad configuration is lost.
I have to go to system preferences then trackpad and click twice on one finger -> tap to click.
Does anyone experienced the same problem ?
Thanks for help
Franck
Config : Imac intel + lion

Mouse stops working, touchpad configuration lost after resync

Hi folks,
Been having issues with mouse devices since the switch to SystemD.
My Logitech G400 mouse works on the GDM menu for a few seconds, then stops. Re-plugging the mouse does not bring it back, though it does still show under lsusb.
Maybe in a related issue, my touchpad has a bad connection cable, and this occasionally causes it to 'replug'. In the past, this would mean a brief interruption to input before it'd return to normal. Now, when it resyncs, it loses all it's multitouch and sensitivity settings.
Dmesg shows this
[ 67.836360] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 67.838414] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 67.980887] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 67.982372] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 67.982379] psmouse serio4: issuing reconnect request
[ 72.426910] psmouse serio4: TouchPad at isa0060/serio4/input0 lost synchronization, throwing 2 bytes away.
[ 72.933191] psmouse serio4: resync failed, issuing reconnect request
[ 79.161005] psmouse serio4: synaptics: hardware appears to be different: id(280343-280343), model(123057-123057), caps(d04733-d04733), ext(e40000-264).
[ 79.865072] psmouse serio4: synaptics: Unable to query device.
[ 81.744968] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input15
Maybe something to do with the different ID? It's been going on since the switch to Systemd. The mouse issue seems intermittent, maybe one in every three boots it works normally and stays working.

Just a quick update, this issue seems to have been related to laptop-mode-tools
Removing laptop-mode-tools fixed the issue
Making changes to autosuspend settings in configurations for laptop-mode-tools didn't seem to have any effect.

LMS Reporting Complete when communication is lost

The LMS we're using, eLogic, reports a SCORM course as Complete if the communication is lost. This was happening on a regular basis as associates began to use online training for the first time. So we requested that it leave the course as Incomplete so the user could re-open more easily. We've been told that this does not conform to SCORM standards that say if communication is lost that the course be marked as Complete. That makes no logical sense to me. Can anyone explain? Or help me to understand?
Thanks!

I think this really has more to do with how your lesson is sending the status. It's the lesson that, ultimately, should decide if the lesson is complete or not. However, that status is not 'definite' until the LMS.commit function is called. Once that's called, then any data that's been sent back to the LMS is official.
So ideally, your CP lesson should not send a Completed status until the user has finished whatever tasks are required to gain that status (all pages viewed, certain interactions finished, etc)...then when the user exits the lesson, CP sends the Commit and Finish calls and the LMS finalizes that lesson.
It sounds like this LMS is doing some sort of default action where, perhaps, if communication is lost with the lesson or a timeout is reached, it automatically commits the status (which CP should have sent). So first:
1. Is your CP lesson sending the status properly? Is it sending Completed as soon as it opens? That's a common issue... If so, the LMS could be receiving the status correctly, but acting on it incorrectly by commiting that status when it should not be.
2. Is the LMS taking a default action, like setting a status to Completed, when the API communication is lost? Which, I agree, sounds like a bad assumption to make and is doubtfully a SCORM requirement.
HTH
Erik

Migration LMS 3.1 - 3.2, configuration lost

Similar Messages

Maybe you are looking for