Migration mapi failures

We're doing a migration from Exchange 2003 sp2 org to a new Exchange 2010 org using Quests migration tool. We are running into random mapi logon error on mailboxes being moved. It doesnt seem to be permissions because we can logon to problem
mailboxes using mfcmapi and the mailbox eventually does move. We have adjusted the throttling polices on exchange 2010 according to quests documentation and are still randomly getting errors. I found this error in the RCA Protocol Logs on exchange
2010 that seems to coincide with the mapi failures and was wondering if anyone had any idea what it means
RopHandler: Logon: Could not create folder Conversation Action Settings. -> MapiExceptionSearchEvaluationInProgress: Unable to create folder. (hr=0x80004005, ec=1177)
Thanks
~Earl

So we make a competing product "DigiScope"
http://www.lucid8.com/product/digiscope.asp and while our customers have not reported any issue like this here are my guesses at what it might be;
1. Could be the version of Outlook you are using on the machine you are running from. Outlook 2007 would be my best recommendation.
2. Could be the account you are logged in as, i.e. we recommend that our customers setup a special account to use with our tool since existing accounts may have limitations based upon other group memberships etc. We call that special account DSAdmin
and within this link there are details on how to set it up http://www.lucid8.com/download/documentation/DSWebHelp/SETUP/Rights_Required_for_Online_Database_And_Mailbox_Access.htm
3. Could be a bug within the Quest product, however if you are running the latest version I would doubt that this was the case since I would hope any such bug was fixed by now, unless of course you are running an older version, so I think # 1 or # 2 would
be the issue.
Troy Werelius
www.Lucid8.com
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 --> 2007 --> 2010 with Lucid8's
DigiScope

Similar Messages

Word couldn't send mail because of MAPI failure, Unspecified error.

This issue is crossposted in Microsoft Answers Word and OUTLOOK. I am posting here in hopes that someone at Mircrosoft may have a solution or at least elevate the issue to someone who does.
http://answers.microsoft.com/en-us/office/forum/officeversion_other-word/word-could-not-send-mail-because-of-mapi-failure/f62678fe-ef1d-42b5-8cfe-1e43d6a1d609
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/word-couldnt-send-mail-due-to-mapi-failure/1f03cf74-9258-411b-9e2b-e41cb5006d71
I dabble with VBA and write and maintain several amateur Word Add-Ins. Accordingly, I have Word 2003, 2007, 2010 and 2013 installed on my PC. They get along fine. However, I am unable to "Share" or "Send" an open Word
document as an E-mail attachment in any version! In each case Word returns an error mesage "Word couldn't send mail because of a MAPI failure, Unspecified error (the same issue occurs with Excel and Powerpoint except the error dialog is a bit different.)
Using Word 2003, I (CAN) "Send to (Mail recipient for review)" in which case OUTLOOK is opened with the document as an attachment. I can also "Send to Mail Recipient" from Windows Explorer, in which case the Word file is attached to
an OUTLOOK message, and I can create an instance of OUTLOOK and send mail from Word using VBA.
I have repaired all Office versions. I have removed the registry keys for all office versions and repaired all versions again. I have run "fixmapi" until I am blue in the face. I have renamed the MAPI32.DLL files and ran sfc \scannow
to ensure that the MAPI32.DLL file is not corrupt. In view of these actions and in view of what I can do, something tells me that the MAPI files are fine.
So what is this "Unspecified error?" This problem is rife on the internet and most of the "canned" solutions have been marked "Answered" by some MS support engineer. These "canned" solutions might have
fixed the issue at one point, but they don't work now. At least not for me.
Thanks.
Greg Maxey Please visit my website at: http://gregmaxey.mvps.org/word_tips.htm

Hello Greg,
I noted that there are 2 knowledge articles that describe scenarios where you may encounter this error.
KB 291152 You receive a "Word couldn't send mail because of MAPI failure" error message when you try to send a Word document as an e-mail attachment in Word 2002
http://support.microsoft.com/kb/291152/EN-US
KB 929362 You cannot send a file by clicking Send in a different program when Outlook 2007 is running as administrator
http://support.microsoft.com/kb/929362/EN-US
Please let me know the following:
1. What version of Outlook are you using?
2. Do you have Outlook open when you attempt the File > Share > Email as attachment from Word? If not, does the error occur if you open Outlook, open Word and then try to send the email?
3. If you close/reopen Word and then try the send again, do you get the same error?
4. Are you running either Outlook or Word in an elevated mode?
5. What happens if you start both Outlook and Word as "Run As Administrator". You may have to right-click each applications' .exe file to be able to choose the "Run As Administrator" option.
6. Do you get the same error when using File > Share > Email as attachment using Excel?
7. In Internet Explorer, open the Internet Options. On the General tab within the browsing history, delete your temporary Internet files and website files
8. Does the issue occur in selective startup mode?
Steps to setup selective startup mode:
Click on the Windows Start button, in the Search box type msconfig and then hit enter. This should open up the System Configuration Utility. Make the following adjustments within each tab.
Services Tab:
- Check the option 'Hide All Microsoft Services'
- Click on button 'Disable All'
Startup Tab:
- Click the button 'Disable All'
- Go back through the list and enable any Microsoft items
Click Ok. It will say “You must restart your computer for some of the changes
made by System Configuration to take effect”. Hit the ‘Restart’ button.
When the PC reboots try to run your test again.
To return back to a normal boot launch msconfig again and choose 'normal startup' on the general tab, click Ok and then reboot the PC.
Regards,
Dennis

MAPI failure Word 2013 --- Outlook 2010

One of my clients upgraded from Office 2010 to Office 2013, but had to keep using Outlook 2010 because Xobni doesn't work yet with 2013. When she tries to send a Word 2013 document as an attachment from within Word 2013 through Outlook 2010 she gets the
MAPI failure error message (link broken). Same document in Word 2010 works fine. Tried loading the pst into her Outlook 2013 as a test, and it worked. Seems specific to this combination. Any workaround? Manageable, but interferes with productivity and error
prone.

I had similar issue. I finally figured it out.
Rename Msmapi32.dll located in C:\Program Files (x86)\Common Files\System\MSMAPI\1033
I spent a few hours looking and found this:
http://support.microsoft.com/kb/926196/en-us
(Similar issue on Outlook 2003-2007)
Tried this and it worked for my Windows 7 Office 2010 issues after downgrading from 2013.

Don't want to trigger alert in mapping failure

Hi Experts,
I have defined one alert category and corresponding rule in RWB to trigger alert for any failure like Receiver determination error, mapping error etc for all interfaces like Create order, cost center, shipments etc.
I have done complete configuration and getting alerts email in mail box if any interface fails with any reason.
But, Now, I came up with requirement that for one particular interface the alert should not trigger for mapping failure only and other interface should also not affect.
Need your help to configure the same.
Thanks in advance for your help.
Regards,
Shele.

Thanks a lot for replies.
the solution achived by defining as suggested.
u2022 Created alert rule for interface specific with u201CNo Restrictionu201D to handle all types of error instead of one generic rule to handle all interfaces.
u2022 Created Multiple Rules ( Like Receiver determination error, IDOC Adapter errors etc) instead of "No Restriction" for required interface to handle errors excluding mapping error. It had sucessfully suppressed the alerts only if u201Cmapping Erroru201D occurs.
Thanks,
Shele.

How to catch a mapping failure event

Hi All,
Is there a way to catch a mapping fauilure and take an appropriate action like sending a fault message to the sender system?
Does the fault message feature serve the same purpose? Will a fault message be always triggered if there's a mapping failure?
Thanks,
Sandeep

Hi Santhosh,
Thank you so much for your answer. I've assigned you points as well
Is it possible to write some custom code for managing this alert? An example:
When a mapping failure occurs, I would like to make a web service call to the sender system.
Ay thoughts?
Thanks,
Sandeep

Mapping failure

Hi
If somebody says mapping failure ........what is its meaning in real time ??
thanks
kumar

Kumar,
Check this weblog for some errors in XI:
/people/prashanth.azharuddin/blog/2006/11/24/some-errors-in-an-xi-production-environment
Also mapping failure might be String out of bounds exception, Some problem with the queues, might be problem with the user defined functions etc.
---Satish

Time Machine - Migration Assistance Failure

Hard drive failure on Mac... installed new drive. When using migration assistant in conjunction with time machine encountering error mid way through data transfer process...unable to create user name.. any insight is appreciated..
This event occurred during several attempts.

Chad Krukowski wrote:
Than you! that is what I wanted to do, a full restore. Unfortunately was following the direction of the genius bar.
Yup. The Geniuses (like most Apple folks) don't actually use Time Machine on their work computers, and aren't real familiar with it, so this sort of thing isn't all that unusual, unfortunately. You could even have gotten similar advice from AppleCare, depending on the expertise of whoever you happened to get. Sigh.

Extracting more information from XI XSLT mapping failure

Hello
I am getting to grips with XI. When developing XSLT mappings I first run them on Stylus or XMLSpy, ensure they work, and then deploy them to XI.
Unfortunately they sometimes fail to work in XI, and the amount of information retrieved about the failure is very small.
I thought of a method to get more infomation in situations like this. I could write a Java method that sends messages to the XI console. This would involve seeing the javadoc API for GlobalContainer, Container and AbstractTrace. I would also need to have these objects in my classpath in order to compile the method. Then I could use the method in the XSL.
There are two small drawbacks to this plan: I cannot find the Javadoc or the Jar file holding the classes.
Perhaps one of you readers could either tell me where these things are, or suggest a better method of solving problems like this.
In either case I look forward to receiving a reply.
Thanks
Bill Logan

Thanks for the suggestion,
completely forgot about the simpler <xsl:message/> command. I tried this, and it worked fine in Stylus.....but not in XI.
I think the problem s when the file is being loaded. An alert box pops up. It says
"Transformer configuration exception occurred when loading XSLT GDS_to_DP.xsl (http://sap.com/xi/GDSConsole, 155fc320-f69f-11d8-97f7-c0140a114c15, -1)"
and the trace window says this
"10:00:13 Start of test
Creating XSLT mapping GDS_to_DP
URIResolver called with href = GDS_DP_Common.xsl and base = GDS_to_DP.xsl
Source resolved. System id = GDS_DP_Common.xsl
10:00:14 End of test"
It seems obvious (from deduction) that the problem lies in GDS_DP_Common.xsl. XI will not give me any information precisely where this occurs
Thanks for you earlier answer Alessandro

Stop XI channels externally if mapping failure happens

Hi Experts,
I have a requirement in which a Job/Program starts the sender XI Channel (JDBC) externally via HTTP URL and writes the content to a file using File Receiver Adapter. Now, the requirement is to stop the sender channel once the file is received at the receiver location. But one scenario where I am stuck is that what if there is some failure during mapping or any other step in XI and the file is not written to the destination location, how will the program come to know about the failure in XI and then stop the channel immediately. Sending alerts would mean some adiministrator has to receive the alert and then stop the channel and this won't be the option for making this an automated process.
So basically I was trying to find out if there is a way/user exit in which we can write custom code to stop the channel and/or do any further processing if there is a failure during mapping and or any other execution step in SAP XI. One option is to set a time out at the program level and after the timeout it can automatically stop the channel but would like to take this as the last option as the same program is used for multiple interfaces with varying payload sizes.
Best Regards,
Pratik

May you have to use BPM for this by catching any system error and taking the necessary action in exception handling

Migration map from DB2 MVS to oracle

Hi there,
I am looking for more details for OMWB,
if it could be used to migrate from DB2 MVS to oracle,
and especially concerned about the mapping procedure,
also concerned about volume and speed as for about millions of records /rows are involved.
How much the OMWB can help?
Please help.......:~
Thanks
and regards.

Hi there,
Thank you very much for your reply,
also,
can the OMWB for DB2/400 also works for DB2/MVS?
is there utility in OMWB exists for the mapping procedure?
thanks a lot.

How Do You Migrate Maps Bookmarks?

Hello there, I want to migrate my Google Maps bookmarks (I have probably around 100) to the new Maps program on iOS 6. How does one go about doing this?
Details: I have iOS 5.0.1 on an iPhone 3GS and a new iPhone 5.

Hello
*[https://support.mozilla.org/en-US/kb/get-started-firefox-android#w_import-your-android-bookmarks-and-history Import your Android bookmarks and history]

WAAS MAPI Failure in Secret Retrieval

Hi All,
I am with a doubt about the traffic mapi intercepted by waas. I have a topology inline in both side Data Center and Branch office , but I see HTTPS, HTTPS works fine but MAPI I do not understand if a have a gain in acceleration, optimization or compression.
I only see this in reports.
MAPI: Acceleration Bypass Reasons
I understand that I am with a problem. My customer did a change in the exchange server that he disable cryptography connection, but I think its not solve.

Hi
In your experience. You solve your issue about domain creating a user to WAAS in each sub-domain or you create only one user in a parent domain?
I would like to know because in my case the mail server is in the parent domain and users are configured to another domain. And my customer do not want permit create a WAAS user in the parent domain with all privillege because the security.
Today I have version 5.3.1 installed and the sub-domain appears in the black list with the follow status.
waascore#show windows-domain encryption-service blacklist identity
Identity Blacklist Reason Domain name
domain.com Failure to retrieve Encryption key data domain.com

Migration Assistant Failures - And Solutions

I used Migration Assistant to transfer my account from an Air to a new MacBook Pro. I share the problems I ran into and the solutions I used in the hopes it helps someone else.
First failure: the six digit confirmation number from the target (Mac Book Pro) would not display on the source (Air). For some reason when I turned IPv6 on in Network preferences | WiFi | Advanced | TCP/IP | Configure IPv6 - to "Automatically" - the source displayed the confirmation number from the target. The target already had IPv6 on Automatic - in fact all our OS X devices has it on Automatic - except for the Air for some odd reason.
The Migration Assistant took some time to finish the transfer - but, it did finish - or so I thought.
Second failure: When I started the new user that was transferred - I got a number of errors. In looking at the user home folder - I found that the library and other permissions were badly mangled. Even OS X asked for permission to repair the library - I typed in my password as requested - clicked OK - but, it never worked.
The scenario 1 posted by Linc Davis fixed all the permissions immediately (see link and the part of the solution I successfully used below).
Linc DavisDec 25, 2014 9:40 PM Re: "The operation could not be completed" Creating an iMovie
Re: "The operation could not be completed" Creating an iMoviein response to patrickredsox
Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.

So I Found the issue.... It was stored in Private/var/zz/cleanup at startup
I found the profile name (home file) in the cleanup at startup folder and deleted it. System is working and now I have my disk space back.
I followed the directions that Linc Davis suggested in this post: How do I resolve 43+ GB of missing storage on the Macintosh HD?

ACS 5.3 Migration Utility Failures

I'm trying to run the migration utility to export from ACS 4.2.0(124) to an ACS 5.3 appliance, and am receiving the "
Fatal Error !! - cannot connect to ACS 4.x DB !!" error when I run the utility on the migration machine. The migration machine has ACS 4.2.0(124) installed and is a Windows 2008 Standard Server SP1 running as a VM. I am logging into the server with VNC (*not* RDP) with a locally-defined administrator account. I get these errors in migration.log when I run the utility and try to do an "analyze and export" function:
07-26-2012 13:36:55 JavaUtils.isAttachmentSupported(JavaUtils.java:1308) WARN - Unable to find required classes (javax.activation.DataHandler and javax.mail.internet.MimeMultipart). Attachment support is disabled.
07-26-2012 13:37:14 ACS4Connector.checkDBConnectivity(ACS4Connector.java:137)FATAL - Fatal Error !! - cannot connect to ACS 4.x DB !!
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
at ianywhere.ml.jdbcodbc.IDriver.makeODBCConnection(Native Method)
at ianywhere.ml.jdbcodbc.IDriver.connect(IDriver.java:354)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at com.cisco.nm.acs.mgmt.migration.ACS4Connector.getConnecter(ACS4Connector.java:66)
at com.cisco.nm.acs.mgmt.migration.ACS4Connector.checkDBConnectivity(ACS4Connector.java:133)
at com.cisco.nm.acs.mgmt.migration.MigrationApplicationCLI.runExport(MigrationApplicationCLI.java:605)
at com.cisco.nm.acs.mgmt.migration.MigrationApplicationCLI.main(MigrationApplicationCLI.java:266)
Any ideas?

Hi there,
The migration utility doesn't work when running Windows 2008 or 64-bits machines. This is already documented:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtn17779
Let me know if it helps.

No restart capability during mapping failures in ABAP mapping

I am doing ABAP mapping and would like to fail the ABAP mapping (during certain application scenarios) in such a way that message cannot be resent? Is this possible during the mapping.

Hi Krish,
My few cents.
You can resend only the asynchronous scenarios.If you resend you need to develop the logic that in the resend the exception will not generate.
From my point of view, if you want to throw a controlled exception you should do via UDF like this blog explains Throwing Smart Exceptions in XI Graphical Mapping
If you work with ABAP mapping you have setting more difficulties if in the future your PI go to be upgraded to PI java only version stack.
Hope this helps.
Regards.

Migration mapi failures

Similar Messages

Maybe you are looking for