Migration of 3.5 quries into BI7

Hi,
Our system is updating to 3.5 to BI7. So whille migarting all the existing BW 3.5 quries have to migarte into BI7. Is this necessary , if not then is there any issues wihile we can execute the 3.5 quries in BI7 gui any problems will com.
Could you let me know how do we can migrate the existing quries into new version.
Regards,
Sharma. IVN

HI,
Is this necessary , if not then is there any issues wihile we can execute the 3.5 quries in BI7 gui any problems will com.
-> If you want to use the new functionality provided by BI7 BEx analyzer, it is necessary to migrate the Queries. New functinality such as, drag and drop chracteristics in and out of filter, drill down, etc. It is necessary to migrate the reports from 3.5 to Bi7
Could you let me know how do we can migrate the existing quries into new version.
-> BEx Queries - in order to migrate BEx Queries from 3.5 to 7, open the 3.5 BEx Query using the BI7 BEx Query designer and Save it, this is the procedure to migrate a 3.5 query to a BI7 Query.
BEx Workbooks - for migrating a BEx workbook from 3.5 to BI7, open the 3.5 workbook using BI7 BEx Analyzer and Save it.
Thanks,
Kalyan

Similar Messages

Migration of 2lis_11_vahdr DS into BI7

Dear Experts,
I have issue with 2lis_11_vahdr data source.
I hope this DS is not support BI7 directly, I relpicated it from R/3 and Migrated into BI7.
Now while converting the existing Infosource into Transformations Iam getting fully mapped Transfermations.
I have installed 0SD_C03 cube also.
I would like to load dats from 2lis_11_vahdr in BI7 with all BI7 option I mean using Transformation method(if content transformation available plz let me know).
Please help me in this...
Thanks,
APC

Hi APC,
1. Select the required source system in the BI content tab.
2. In BI content, select grouping as install objects Before... search for the Cube you want to install and transfer it for the installation.
3. Select the check boxes for the installation of objects.
4. Check Data flow is avaialable properly from Cube>Updaterules>info source>Transfer rules>data source.
5. Then try migrating in the order update rule> Inforsource> transfer rules and then the datasource.
Hope thses steps will help you..revert the migrated data source back to 3.X form and try doing this.
Regards,
Rangz

Migrating BAPI & RFC function modules into web services

What is the advantage of migrating BAPI & RFC function modules into web services?

Hi.
That's a very good question. Why did you ask it, are you considering doing so?
I wouldn't think there would be any performance advantages using WebServices.
You could make your BAPI's available for other systems than Web Dynpro or SAP systems by turning them into WebServices.
That could be an issue when you want to use different integration engines perhaps.
A WebService might also be better for dealing with large number of requests I guess.
When dealing with XML you can also use the advantage of XSLT for validating your data.
The main advantages would still be the availability of your service for non-SAP systems.
/Mikael

Migrate COPA into BI7

Hi gurus,
I have implemented COPA but the data source in version 3.x. What would be the best way to migrate this into BI 7 version
Any way to migrate the transfer and update rule into transformation ?
Please advice
Thank you

Hi Sarvana,
Migration of COPA is not different then others.,
you need to follow below steps,
If the Dataflow is from Data source to DSO and DSO to Cube
1) Select DSO to Cube update rule and right click on
        update rule > additional function > create transformation
        This will copy and map all the objects with routine if exist and do
        the syntax check once before activation
2)Then select the transfer rule from Data source to
         DSO to do the same thing as above.
3) Then migrate the Data source , in   this always select the u2018with exportu2019 option which will enable to revert back to 3.x version .. If needed
4)If from one data source many targets are getting updated then use infosource
5) Create DTP for all
Regards,
Ashish

Query Migration from bw3.5 into BI7.0

Hi friends,
I need to run the queries in BI7.0 which are in BW3.5. How can we do this and what are the prerequisites.
Thanks&Regards
Shaliny M.

Hi,
Chk out this link....
/message/1969749#1969749 [original link is broken]
/message/2324740#2324740 [original link is broken]
All the queries will work if the peratining objects exists in the warehouse. Other than this there aren't any spl measures that actually needs to be taken care to while running the query on BI 7.0, to my knowledge.
Happy Life,
Aravind

Issue when migrating 3.x queries with 2 structures into BI7

Hi all,
We have a 3.x query where we have 2 structures (one in columns and one in rows).
The Keyfigure is in 'Filter Values' and in each structure, selections and formulas are defined.
The query works fine in 3.x
when i try to 'save as' the query in BI 7 and run it, it gives an error that 'at least one keyfigure must be query'.
we can't change the query layout.
Is it an issue in BI 7?
Is there any SAP Note for it?
Or, is it Functionality in BI 7?
Thanks,
Nisha

Please give us your Sp levels and also the frontend sp levels..

Migrating AUC from legacy system into SAP

Hi,
I'm trying to migrate AUC into SAP from a legacy system and the fiscal year start from 2008. How do I post the acquisition value in AS91 if the AUC is acquired in 2007? using transaction type 900? The asset value date is posted in 01.01.2008 is I post the value through transaction tab. Is that correct? Pls advice.
Best Rgds,
Li Ling

Hi Shaik,
You need the access to the file system of ur legacy application and then you can follow this link for the required ifnormation
File & Header
Regards
Vishnu

Problem in loading of flat file transaction data into BI7

Hi Experts,
I am new to BI7, got in problem in creation of Data source.
I have fields in flat file are:
CUSTID,SREPID,MATID,PRICE PER UNIT,UNIT,QUANTITY,TRANS.DATE
one of the row under the above fields is
C100,SR100,MAT01, 50,CS,5,19991005
Created infoobjects are:
IO_CUSID
IO_SRID
IO_MATID
IO_PRC
IO_QTY
IO_REV
0CALDAY
IO_QTY was created with Unit/currency '0UNIT'
In creation of Data source, under field tab system shown extra CS field, I did confuse that which infoobject should be map to this field. At the same time i created IO_QTY with 0UNIT so when i entered IO_QTY under infoobjects column, system automatically created 0UNIT infoobject. I didn't completly understand why one of the unit (CS) sat under the fields column. could you clarify me please.
And also could you please tell me the procedure of creating transfer routine for sales revenue as we didn't have this object in flat file (SS). In earlier version of BW(Addison Wesley Step by Step book) i did this at infosource level. Here i am loading the data without infosource so just i would like to know is it possible to create transfer routine at DS level or do i need to create Infosource in this case. If it is the case also could you please make me understand with procedure to create transfer routine for sales revenue.
Your solutions will be more appreciated with points.
Thank you,
Shri

Hi,
1.Open Administrator Workbench: Modeling, from the menu or using the transaction RSA1
2.Go to Source Systems (File)and Create a new System.
3. Double click on the datasources, create data source
4.Entitle the Datasource, choose Transaction Data as Data Type Datasource
5. In next screen, Go to Extraction , Activate the data source
6.Go to Preview. Press Read Preview Data.
7.Data will be loaded: Save and activate the datasource
8.Go to InfoProvider, go to Info area and create Infocube
9.Entitle the infocube, press create
10.Display all info objects: . Choose your info objects , Move the characteristics and key figure to the infocube by drag and drop adn activate
11.Go to InfoCube, create transformation
12.Click on the Show Navigator button. Match the fields in navigator. Save and activate.
13.go to info provider, your info cube, create data transfer process
14.Choose: Extraction Mode: full
Update: Valid records update, Reporting possible (Request green)
Activate, execute
14.Double click on the data source, Read Preview Data
15.Create an InfoPackage by right clicking on the datasource. Execute the load into PSA.
16.Verify data was loaded into PSA before proceeding with the next step.
17. Execute the Data Transfer Process
18.Monitor the results (Menu: GoTo: DTP Monitor)
19.Try to display the data at the BW Frontend.
Thanks,
Sankar M

Migrate a VMWare Windows XP into a Boot Comp partition

Morning.
I've installed Windows XP on a VMware 3.0.1 image. Now I want to install Boot Camp on my Mac running SL 10.6.2. and want to use a copy of my Windows XP installation in Boot Camp. How can I migrate it into the Boot Camp partition?
TIA and kind regards, Friedrich

Hallo Friedrich,
sorry to say, but that's not possible.
BootCamp needs to use a Windows installation CD in order to install Windows.
And even if there would be a way, the hassle with the different hardware basis (native hardware with BootCamp versus virtualized hardware with VMWare) and thus the need for reinstallation of nearly all hardware drivers would make it unuseable.
However the other way around, using a BootCamp Windows installation for a VMWare Windows is possible.
Regards
Stefan

Migration of EA3 connection settings into the final SQL-Developer 3.0

The automatic connection migration of EA3 (3.0.03.97) connections into the final version 3.0 does not work. Any ideas what's wrong? I am using several folders to hold many connections to different database servers and database users. The migration of EA2 (3.0.0.45) connection settings was successful.

Doesn't either with EA4.
Only solution is to export them from your previous version (right-click Connections), then import into the new one.
Have fun,
K.

Migration Error - Cannot Insert Null Into MD_PROJECTS.ID

Environment:
Oracle 11g (11.2.0.2)
SQL Server 2008 R2
SQL Developer 3.0.03 Build Main-03.97
Problem:
We are migrating a SQL Server DB to Oracle and will need to perform this repeated times using updated versions of the SQL Server DB. I successfully did this several days ago using OFFLINE mode using a DB received in late March. There are two schemas in the SQL Server DB (dbo and EXA) that need to get migrated. Within SQL Server I attached the DB and renamed it to PTS. I then went through the wizard and ended up with two schemas in Oracle (dbo_PTS and EXA_PTS). I am now trying to repeat the process with a DB I just received. Within SQL Server I attached the DB and renamed it to PTS_April. It also has the same two schemas (dbo and EXA).
My repository schema (MWREP) has the following permissions:
GRANT RESOURCE TO MWREP WITH ADMIN OPTION;
GRANT DBA TO MWREP;
GRANT CONNECT TO MWREP;
ALTER USER MWREP DEFAULT ROLE ALL;
-- 6 System Privileges for MWREP
GRANT UNLIMITED TABLESPACE TO MWREP WITH ADMIN OPTION;
GRANT CREATE SESSION TO MWREP;
GRANT CREATE ROLE TO MWREP WITH ADMIN OPTION;
GRANT ALTER ANY TRIGGER TO MWREP WITH ADMIN OPTION;
GRANT CREATE USER TO MWREP WITH ADMIN OPTION;
GRANT CREATE VIEW TO MWREP;
I step through the wizard with the following general parameters
1) MWREP connection as the repository - I have dropped and recreated the repository objects.
2) Offline Mode for the Source Database (I've successfully created the .ocp file)
3) PTS_April selected in the Capture page
4) Offline Mode for the Target Database
5) Offline Mode for the Move Data
6) Click Finish and it runs for about 30 seconds first saying Create Project and then saying Capture.
I then get the following error message:
Migration actions have failed. Check the migration report for details. : ORA-01400: cannot insert NULL into ("MWREP"."MD_PROJECTS"."ID")
Any assitance solving this problem are appreciated.

Hi, I had exactly the same problem and I resolved it be dropping all objects associated with the migration, this involves packages, types, views etc. Once I had ensured that i had a blank canvas, i stated again and it worked succesfully, good luck, Matt

Migrating an existing html template into Eloqua?

I am new to Eloqua, in fact, it is not yet installed. Thinking ahead, can anyone tell me if I will be able to migrate over an existing html email newsletter template into the platform? Once the look/feel are in Eloqua, I expect that I could edit the hyperlinks to trigger notifications and populate open rate stats in the dashboard. Curious if someone has had experience with a migration. Was it successful or was it disastrous? thanks.

Before proceeding with NitroX, you need to manage your project as web application. The project should be organized in a war directory structure containing a valid web root.
Ex:
-- C:\MyProject\WEB-INF\web.xml - in this case MyProject itself will be the webroot
-- C:\MyProject\site\WEB-INF\web.xml - in this case site can be the webroot
Once you manage the project as web application you can start working with NitroX features. The following are different ways to manage the project as web application:
-- Launch eclipse using NitroX shortcut
-- If project is present in the workspace, right click and select "Manage as Web Application"
-- or try to open a JSP/XML file in NitroX Editor (Open With > NitroX Editor)
-- or File > New > Web Application Project > Existing Web Application - browse and select the project root and complete the wizard

How to migrate a weblogic project files into oracle 9i JDeveloper?

Hi,
I have a simple customer registration website (on top of 8.1.7 DB using oracle jdbc thin driver) as follow:
It is all under c:\weblogic\myserver\public_html\jsp\
(Which is the document root)
12 html files under c:\weblogic\myserver\public_html\jsp\
40 JSP files under c:\weblogic\myserver\public_html\jsp\cut
10 image files under c:\weblogic\myserver\public_html\jsp\images
1 java package under
c:\weblogic\myserver\public_html\servletclasses
The following is from the properties file under weblogic directory. What do I need to configure in oc4j as a web logic
weblogic.jdbc.connectionPool.examples-dataSource-demoPool=\
url=jdbc:oracle:thin:@mymachine:1521:db03,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=2,\
maxCapacity=4,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=10,\
testTable=dual,\
props=user=cut1;password=cut1
weblogic.allow.reserve.weblogic.jdbc.connectionPool.examples-dataSource-demoPool=everyone
weblogic.allow.reset.weblogic.jdbc.connectionPool.examples-dataSource-demoPool=everyone
weblogic.allow.shrink.weblogic.jdbc.connectionPool.examples-dataSource-demoPool=everyone
weblogic.jdbc.TXDataSource.examples-dataSource-demoPool=examples-dataSource-demoPool
weblogic.jdbc.DataSource.examples-dataSource-demoPool=examples-dataSource-demoPool
It there any how to steps to import it and be working- into Jdeveloper and deploy it against oc4j that I downloaded as a web server. I searched and contacted friends even at oracle and reached dead end.
Is there a migration from bea to oracle 9i that exist and that is tried and found to be working?
If so what are the details that makes it successfull all the way?
Can all those files be maintained in JDeveloper 3.2.3 or 9 keeping -your recommended- directory sturcture?
What are steps to setup the web server?
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version I.E 5.5
- O/S + Version Windows 200 Proffessional SP2
*** Because of JDeveloper ***
*** However please recommend any web server on HP or Sun ***
- Error Msg N/A
- Oracle 8.1.7 with thin JDBC driver

There are two ways of doing this:
a) You do a system copy using R3load
This will give you a "free" reoganization because the tables will be loaded into the database as if you were doing a new installation. The disadvantage is, that it takes more time and good planning.
b) you do a system copy using backup/restore together with the database upgrade
This is a fast way to get your system upgraded and if something goes wrong you can still use the old system. Check
Note 932722 - Upgrade to Oracle 10.2 during a database copy
this is a note for Windows but you can adapt it to be used on Unix/HP-UX too.
And just as a remark:
The "free" support for Oracle 10g is ending next year in June (see Note 1339724 - Oracle 10.2 Extended Support free until July 31, 2011) - after that you have to buy additional support if you want to continue to run 10g. If you run now a migration/upgrade project, why not upgrade directly to 11g?
Markus

Mid 2013 Migration - Can't Sign Directly Into 2013 FE Server

Migration to 2013 almost complete. While testing ran into the following scenario: 2010 FE Standard Server, 2013 FE Standard Server, 2013 Edge Standard Server. DNS entries still pointing at 2010 FE server (sipinternaltls, lyncdiscover, admin, dialin, meet,
sip, sipinternal).
If I sign out of Lync, go to cog - tools - options - personal - advanced - and set my internal server name to the 2013 FE standard server, I cannot sign in. Replication status between the three servers is "true". If I check the sign-in logs, I
get the following:
1 Login: FAIL (hr = 0x1)
1 server(s) returned
Server: "2010 lync server".domain.com:5061, internal, discoveredadded to list of auto-discovered servers
signin to server=<empty server data>
   redirectedServersList="2013 lync server".domain.com, internal;
   autoRetryByErrorCode=1
   withRescheduleHint=0
   withAutoRetrials=0
   Login failed with permanent error or no auto-retrials
Part of the errror makes sense because the DNS entries are still set to the 2010 server. What I do get is that I'm pointing directly at the 2013 server which seems to be working just fine, why would there be connection errors?

Hi,
Did the issued user homed in Lync server 2010 pool or Lync server 2013 pool?
If the user homed in Lync server 2010 pool, then when you point to Lync server 2013 pool with manual login, you will fail to login.
If the user homed in Lync server 2013 pool, did the user move from Lync server 2010 pool or create a new user in Lync server 2013 pool? You can try create a new user in Lync server 2013 pool to have a test.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Migrate Informix 7.31 Database into Oracle

Dear all,
I intend to import an Informix Dynamic Server 7.31 Database into Oracle; In this case it's the database of an old system which is not in use anymore, so the purpose is strictly readonly.
No triggers, few procedures and functions.
I'd like to import the data into Oracle 11g, is this possible or do I have to import into 10g and then upgrade to 11g?
The docs say the migration workbench is the tool of choice, is there anyone who can provide me with some experience?
How do I verify the migration was successful and the data was imported exactly the way it was?
Thanks in advance,
Andy

Andy,
Informix can only be migrated using the older Oracle Migration Workbench 10.1.0.4 and as it says on the web site -
http://www.oracle.com/technetwork/database/migration/informix-085032.html
the only supported versions for the workbench are 9i and 10g.
However, this is only for running the workbench itself and creating the repository. If you do an offline migration then you can run the scripts created by the migration utility in any version of Oracle and load the data using any version of SQL*Loader.
It may be that you can create the repository for the 10.10.4 workbench in an 11g database but I've never tried it.
As for testing there is a section in the documentation -
Oracle® Migration Workbench User’s Guide Release 10.1.0.4 for Microsoft Windows 98/2000/NT/XP and Linux x86
Chapter 7 - Testing the Oracle Database
that discusses how you can test the migrated data.
I've only ever run small test migrations and issues can depend on the complexity of the data and particularly stored procedures and embedded SQL.
If you have no triggers, few procedures and functions then it should be fairly straightforward.
It is planned to include Informix migration in a later version of SQL*Developer but there is no date for that yet.
Regards,
Mike

Migration of 3.5 quries into BI7

Similar Messages

Maybe you are looking for