Migration of archive objects from the infotype 900x

We have installed a new ECM to archive documents as contracts to a PERNR... I'm writting a migration program which from the table TOAHR copy archive from a source repository to a destination repository...
To do I use the RFC SCMS_AO_COPY ... But I have a exception 4 (config error).... What's the best way to fix this... ?
How can I set SAP HR to set the new archive repository for SAP HR archived object ?
Best regards
Jerome

Hi Dejan,
Pl find the POA attached in the first post.
We are trying to build an metting place application server and web server 8.5 on 7835I3-K9-CMD2B ( Unsupported hardware ) but later move too 7835I3-K9-RC1
I need your inputs or shere experaince whether the Meeting place application media DVD will boot in 7835I3-K9-CMD2B
and if we change the firmware of it as per the migration document. what would be the effect of it.
Description:
Latest Firmware Update Utility 3.7(1) for IBM MCS 7825-I3, MCS 7828-I3, MCS 7816-I4, MCS 7825-I4, MCS 7828-I4, MCS 7816-I5, MCS 7825-I5, MCS 7828-I5, MCS 7835-I2, MCS 7845-I2, MCS 7835-I3, MCS 7845-I3 Cisco MCS Servers
Release:
3.7(1)
Release Date:
24/Jun/2013
File Name:
FWUCD-3.7.1-I.iso
Size:
717.38 MB (752232448 bytes)
MD5 Checksum:
b7314015296d465908843359f8e72f0f
http://software.cisco.com/download/release.html?mdfid=280480160&flowid=20285&softwareid=283046743&release=3.7(1)&relind=AVAILABLE&rellifecycle=&reltype=latest
There are certain things which are not supported by CISCO TAC but we will have to do because of customer retrain and hardware availability.
I would share the output of commands ASAP. Catching up with customer today.
Regards,
Atul

Similar Messages

Archiving objects from tabel QMEL, JEST, JCDS with priotype SR

Hi,
In tx SARA I can find 5 archivingobjects to archive data from table QMEL.
CM_QMEL
NM_QMEL
PM_QMEL
QM_QMEL
SM_QMEL
It looks they correspond to the priotypes named in field ARTPR in table QMEL.
CM, GO, PM, QM, SL, SM, SR
Our table QMEL consists of records with priotype SR.
My question: Which object can I use to archive?
Regards Marco

Hi,
I haven't found any documentation related to this so what you can do is spend around 25 mins and test it to see which archiving object suits your need. Try the following in a test environment:
1. Complete a notification and flag it for deletion.
2. For every archiving object (you have 5) create a test variant for the pre-processing program. In this variant specify the notification ID in the notification field and select run in "Test mode".
3. Execute the pre-processing program for each archiving object using the variants that you created and then check their output, you should get an archiving object that selected for archiving this notification and then you can go on with that archiving object.
Please let me know if this helps.

Problem in getting the function template object from the repository.

Hi all,
I have created a par file. I have a JCO connection in that. I am facing problems in getting the function template object from the repository. This thing is running successfully when i try to deploy it in Tomcat. But i am facing problems when i try to deploy it in SAP EP 6.0.
Below is statement which is giving error after being deployed to SAP EP6.
This is executing fine when executed in Tomcat Server.
// getting the object of function template
IFunctionTemplate functionTemplate =
aRepository.getFunctionTemplate("YADDNEWUSER");
Note : YADDNEWUSER is the name of the RFC which I am calling from my JAVA Code.
Thanks in advance,
Divija

This sounds like a bug in the smart upload code. I have used this stuff before, but it's probably an older version, so maybe they broke something. Enumerations aren't usually guaranteed to keep things in any particular order. I would say for now, make a method to take the enumeration and a param name to find the value. And write to the JSPSmart people.

Deleting objects from the stage

Hi all,
I've got some items on my stage that I'm removing with
RemoveChild(). The items no longer show, however, as stated in
LiveDocs, the item is not actually destroyed. This means any
bindings/listeners created by that object are still in existence
and are creating errors (Specifically, I'm getting "The supplied
DisplayObject must be a child of the
caller").
LiveDocs mentions that if I want to actually delete an object
from the stage entirely, I should use the "delete operator", but
for the life of me, I can not find any documentation on the
existence of such an operator. Any advice would be much
appreciated.
-Hob

It IS ridiculously hard to find. Searcing Live Docs for
delete oprator will turn up a slew of hits, but which is the right
one?
This is from old docs, but it is still valid:
http://livedocs.adobe.com/flash/8/main/00001865.html
Tracy

How to remove unused objects from the webcatalog In OBIEE11g

Hi,
I want to delete unused objects from obiee11g catalog, i know in obiee10g it's working fine (i.e: we can do it via manage catalog then delete the unused objects) is there any way to do it automatically like RPD utility --->removing unused objects from Physical layer in RPD
fyi: I don't want to delete manualy. i need somethink like button/link to find unused objects(report,filter,folder..etc) from my obiee11g catalog.
Thanks
Deva
Edited by: Devarasu on Nov 29, 2011 12:06 PM
Edited by: Devarasu on Nov 29, 2011 3:15 PM

Hi,
Checked with Oracle Support team and confirmed below points
--> incorporated into the Current product and consider as BUG it may resolve future release
--> Currently there isnt any automatic method to remove the unused objects like reports, filters,folder etc from catalog.
Treated as Bug
Bug 13440888 - AUTOMATICALLY REMOVE OF UNUSED CATALOG OBJECTS FROM WEBCATALOG
FYI:
SR 3-4984291131: How to remove unused objects from the webcatalog in obiee11g
Thanks
Deva

Copy all the objects from the one system that start with (ZANK)

hi to all,
I have installed the name space /ank/ in the US system, we need to copy all the objects from the India system that start with (Zank) and re-create them as /ank/. problem is how can i copy objects and re-create.
thanks

Hi Ankal,
I guess this is your second thread on the same question. Ok provide these information
>>I have installed the name space /ank/ in the US system,
Are you saying that you have a machine (US System) and i has a namespace /ank/ ? What all objects are there in this namespace?
>>we need to copy all the objects from the India system that start with (Zank) and re-create them as /ank/.
Is the India system on the same US system?
Also tell me whether you have opened the home page of SAP XI/PI? If yes , are you able to open Integration Repository? If yes then how these US and India systems are referred in Integration Repository? Are they referred as separate software components?
Regards
Suraj

How do I remove an object from the foreground of a photo eg a fence?

How do I remove an object from the foreground of a photo eg a fence?

What version of Photoshop?
If CC then try here
Learn Photoshop CC | Adobe TV

How to suppress compiler errors without excluding database objects from the "Schema Compare" tool (using VS2013/SSDT)

Hi,
In short: How to suppress compiler errors without excluding the object from the "Schema Compare" tool ??
A bit longer:
We have a SQL Server 2008 project in Visual Studio 2013 running SQL Server Data Tool.
An old database, with a lot of history in, has been imported into SSDT and there are many syntax errors preventing the project from compiling/running. An typical error is: "SQL70001: This statement is not recognized in this context".
Running the "faulty" scripts on the server, executes just fine. I understand that there are syntax errors and they should be rewritten, but it's not gonna happen just like that - it is a slow process over a long period of time.
I know it is possible to change Build Action to None, but that also exclude the object from appearing in the Schema Compare function/window.
So - how to ignore some compiler errors and still having the objects to appear when doing "Schema Compare" ??
Thank you in advance.

Hi Steven,
Thanks for your comments.
Well, it sure does help in the future, but right now i would prefer the other way - to suppress some errors and still allow the scripts to build.
The thing is that if we "rewrite" the objects into create scripts, then we have a huge test job ahead of us + the database environments (PROD vs DEV and UAT) does not share the same AD or DB users and therefore grants is lost if dropping/creating
objects, right!
If you drop a object before creating it, the drop will also drop the roles and grants and since they don't share user table, the create will not be able to add the permissions again. There might be a solution to that, but it is going to be very complicated
for some newbies like us. We need something we can trust.
BR
Peter

Does migrating data erase it from the source computer?

Does migrating data erase it from the source computer?

no, its in both locations
http://support.apple.com/kb/ht4889

[Cp] Select object from the timeline and move it on slide with cursor keys ?

Hello,
I don't know if there's a shortcut for this :
Sometimes, it's easier to select an object from the timeline but if you try to use cursor keys to move it, you're in fact moving IN the timeline.
Is there a way to switch to Slide edition ?
Thanks.
PJ

You can not only use the cursor keys, but also in combination with other keys. And indeed, you have to move the cursor over the stage:
http://blog.lilybiri.com/shortcut-keys-part-1-moving-and-resizing-obje about shortcut keys for the stage
http://blog.lilybiri.com/tiny-timeline-tidbits about shortcut keys for the Timeline
There is a list with shortcut keys in the Help, but not complete.

[svn:osmf:] 14486: Add stream metadata support by extracting the actual metadata object from the binary data stream .

Revision: 14486
Revision: 14486
Author:   [email protected]
Date:     2010-03-01 14:27:41 -0800 (Mon, 01 Mar 2010)
Log Message:
Add stream metadata support by extracting the actual metadata object from the binary data stream.
Fix bug 466
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/f4mClasses/ManifestParser.as
    osmf/trunk/framework/OSMF/org/osmf/elements/f4mClasses/Media.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPStreamingUtils.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FIndexHandler.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FStreamInfo.as

same problem, data not replicated.
its captured,propagated from source,but not applied.
also no apply errors in DBA_APPLY_ERROR. Looks like the problem is that LCRs propagated from source db do not reach target queue.can i get any help on this?
queried results are as under:
1.at source(capture process)
Capture Session Total
Process Session Serial Redo Entries LCRs
Number ID Number State Scanned Enqueued
CP01 16 7 CAPTURING CHANGES 1010143 72
2. data propagated from source
Total Time Executing
in Seconds Total Events Propagated Total Bytes Propagated
7 13 6731
3. Apply at target(nothing is applied)
Coordinator Session Total Total Total
Process Session Serial Trans Trans Apply
Name ID Number State Received Applied Errors
A001 154 33 APPLYING 0 0 0
4. At target:(nothing in buffer)
Total Captured LCRs
Queue Owner Queue Name LCRs in Memory Spilled LCRs in Buffered Queue
STRMADMIN STREAMS_QUEUE 0 0 0

HT4796 How do I migrate two user accounts from the PC and create the two new user accounts on the mac?

I am migrating from a PC to a new Mac. The PC has two user accounts. I want to migrate those two accounts from the PC to the Mac, keeping everything separate as it is on the PC. How can I do this?

When you have set up migration assistant on your pc, it gives you options on what you want to migrate. Chose one account and migrate it, then choose the other account, and do the same. Two accounts will automatically be set up on the Mac.

Archiving object for the tables

Hi,
I want to archive the tables.But some of the tables I did not find the archiving object.What should be done on this.Pls guide.
Tables w/o archiving object which i want to archive
APQD,ARFCSDATA,DYNPSOURCE,WBBP,REPOLOAD,REPOSRC,BDCP,BDCPS
Thanks

Hi Rajesh,
Not all tables can be archived. For some tables there may be option available for plainly deleting the contents without archiving. Please check the Data Management Guide available at the service marketplace for further information. You may also refer to SAP note 706478.
Word of caution: Not all tables are meant to be archived / deleted. Some tables maybe required for proper functioning of the SAP system (however big the table is). So please proceed with caution if you are trying to develop a custom program to delete contents from a standard SAP table, you may end up deleting some data which was required. Even when deleting using standard SAP programs, proper due diligence and testing is necessary
Hope this helps,
Naveen

Mail deleted a current inbox and restored an old deleted inbox. It won't restore from Time Machine, and I'm missing archived emails from the old account. I'm pretty sure there is other stuff missing, but it's hard to tell. Any ideas why it would do this?

Our Mac was working fine last Monday, then Tuesday morning one of our current inboxes was gone, and an old, archived inbox was restored--twice. Other than some trouble-shooting on Tuesday, we've pretty much left things alone as we were busy doing other stuff.
I tried restoring the files from Time Machine, but it didn't work. I followed plisk restore instructions--nothing. It's a mess. We have no idea what would have caused this. We're above average users--we weren't mucking about with anything. It was just so strange.
I went back into Time Machine, and it just makes no sense that I can't restore anything. We're now missing important emails--nothing too tragic, but still a pain in the butt. Thankfully the current inbox that was somehow deleted had a back-up on our email server, but the archived/deleted inbox file that was magically restored had all the archived emails that we kept deleted.
Any ideas would be wonderful.
Thanks!

Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk.

Setting bind variable for a view object from the Managed Bean

Hi,
i am using JDeveloper 11g, i have to create LOV in the JSF. To show the LOV, it has to populate data using View object and its query parameter need to be sent from the Managed Bean.
For the View object i want to set the bind variable parameter from the managed bean value. bename is stored in a managed bean (session scope)
#{beantest.bename}
But it gives the following exception.
JBO-29000: Unexpected exception caught:
org.codehaus.groovy.control.MultipleCompilationErrorsException,msg=startup failed, Script1.groovy: 1: expecting '!',found '{'@ line1, column 2.
I have followed the link http://kr.forums.oracle.com/forums/thread.jspa?threadID=615474 like Frank wrote on 8.2.2008:
But steps are not clear.
How to input the VO bind parameter with Managed bean variable?
Any Help
Regards
Raj
Edited by: user9928180 on Dec 17, 2008 9:51 AM

Hi,
a bind variable in a VO needs to be exposed as an executeWithParams operation in the pageDef file. Just add a new action binding to the pageDef file (context menu) and select the executeWithParams operation on teh VO. Then in the argument field, reference the managed bean property for the value
Frank

Migration of archive objects from the infotype 900x

Similar Messages

Maybe you are looking for