Migration of balances for new ledger using the New GL

Hi everyone,
I have a specific scenario into this customer where we have implemented the SAP version ECC6.0 with the table FAGLFLEXT is active and using just one ledger (0L - standard). We need to create a new ledger for IFRS (e.g: 1L), as the customer didn´t use the splitting document functionality, it was not purchased the migration services.
Now I need to upload the balances in the accounts into new ledger, I understand that for general accounts there is no problem because I can use the transaction FB01L and specifying the new ledger (1L).
My doubt is : How can I to do the upload balances for open items into the AP and AR accounts?
Anybody can help me?
Thanks
Ricardo Gomes

You are right. I just realized that and came back to update my response. Please see the following note.
https://service.sap.com/sap/support/notes/1070629
I see a standard program delivered for that purpose in the note above.
FAGL_MIG_SUBSEQ_POST
Again, please go through the note. There is a lot of information on data transfer (and other FAQs) for new non-leading ledgers.

Similar Messages

Yesterday I changed my email password on my home computer. Today, I can't get any new emails on my Samsung Galaxy 4; I deleted the email account entirely and tried to set it up again as a new account, using the new password, but it keeps giving me an err

Yesterday I changed my email password on my home computer. Today, I can't get any new emails on my Samsung Galaxy 4; I deleted the email account entirely and tried to set it up again as a new account, using the new password, but it keeps giving me an error message that reads: Cannot safely connect to server. The new password is working on my home computer. I even tried the old password; it just gave me the same error message.

I'm sorry you're having issues with your e-mail account on your phone Rusty1112. Let's figure out what's going on. First, please try deleting account/information again and then restart phone. When phone is back on, try adding e-mail account again, and be sure you're entering exactly as you set up, meaning its case-sensitive. If you're still getting same error, please let us know and let us know what e-mail account it is, Yahoo, AOL, MSN, etc.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'

Hi,
I am using SCOM 2012 SP1
I have recently been experiencing an issue when trying to create a new dashboard using the wizard. I get to the step where you select a group or object to add to the Scope and Counters section. When I try to search for a particular object such as a
port or interface it times out and returns an error. The error is shown below:
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not
produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer
Support Services for more information.
   at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
   at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String
languageCode, InstanceQueryOptions instanceQueryOptions)
   at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
   at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
String typeWithIconPropertyName, Boolean propertyCollectionRequested)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
   at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
It appears to be complaining about internal resources, but we have not experienced this issue before and both the management and SQL servers have plenty of resource. The databases are held on a seperate dedicated sql server and I have noticed that when I
try to search for the object, the sqlservr.exe process immediately consumes 50% CPU while the query is running. As soon as it ends (errors) the sqlservr process drops back to a reasonable number.
No changes have been made to either the management server or sql server. We were able to create dashboards one day, but then recieved this error the next.
Has anyone else seen this issue? or can anyone explain what is happening?
Many thanks

Hi,
Asposted earlier,hadt he same problem
when creating a Dashboard widget type
State.
Ones olution I found for this was as follows:
When creating the State widget,the option
to specify the criterion I left blank
and finished the creation of the dashboard.
With that managed to solve the problem.Of course this
is not the solution, or the root cause
of the problem.
I will examine more about this issue, and sohave
the ultimate solution and why such behavior,I post
here.
thank you
Wilsterman Fernandes

Am unable to click and open new tabs using the new tab button after downloading the newest version of firefox?

have recently downloaded the newest version of firefox. after installing i am happy to say i am pleased with the new look and features etc though for some reason i am unable to open new tabs as before.
i now have to right click on bookmarks or favorites and select open in a new tab to do so, rather than simply clicking on the new tab button..

If the problem turns out to be the "New Tabs at the End" extension, there actually is an internal setting for this that you could use instead.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
(3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false. That's it.

Why can I not open a new tab using the New Tab button, going to File and clicking on New Tab or by pressing ctrl + T?

I am able to right click on a link and choose "Open in a New Tab."

This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbGLSV5/3.12.2.16749
See:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same ID). how do i consolidate the two users on my new mac book?

i set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same apple ID). how do i consolidate the two users on my new mac book?

Well if you use the Finder Go menu to Computer, a window opens up double click on your boot drive and then on Users folder, open the other user folder and open Public and drop your files into DropBox
When you do this it will copy them and change the permissions and user assigned to it, so log into the other user and place them into your respective normal folders.
Once you have all your files over and don't need the old user, use System Preferences > Accounts to delete it if you wish, however it's good two Admin accounts on the machine in case something bad happens in the other. Some people for security reasons on use a Standard account for most uses and a emergency Admin account.
One can still do most Admin things in Standard user.

I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone. I don't want her contacts! How do I get rid?

I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone. I don't want her contacts! How do I get rid?

Hi,
You have 2 solutions:
1 - You can use 2 differents icloud account
2 - You use the same account but you don't sync yours contacts.
You configure that in Settings > icloud
You activate or desactivate what you want.
Have a nice day.

How can I find my serial number for Adobe Acrobat 11. I got a new iMac and I don't want to use the new version at £18.00 per month. I don't need it. Thank you

I used to use CS5 and I want to use the Acrobat version on my new iMac.
How can I find my serial number for Adobe Acrobat 11. I don't want to use the new version at £18.00 per month. I don't need it. Thank you

Hi Anthony Aduhene
Please refer : Find your serial number quickly

I want to transfer my data to new computer and use the new computer for iPhone 5. Have anyone can recommend the best way for me?

I have some problem to transfer my data via home sharing. (Maybe my internet connection is poor)
I tried to transfer all the apps and music via home sharing. When it's done, it showed the internet connection is time-out. (So sad )
So I want some people to help me about the methods to transfer datas from old computer to the new one.
Then I can use the new one with new iphone 5.
PS. I use iPhone 3gs with iOS 4.3.5.
Old computer uses Microsoft WIndows XP.
New one uses Microsoft Windows 7.
Thank you

you can't recover iOS crypted backup password, for security purposes. your backup is useless. sorry.
if you still have your old iPhone, make a new back-up

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - help?

Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - anyone help please?

Sorry - I should have added that I have imported a Quicktime movie, originally created as an iPhoto slideshow.
I want to create rolling credits at the movie end and apparently you can only do this using iMovie - can you help please?

[svn] 4634: First part of glue code for allowing Halo components to use the new Text Layout Framework , in order to get functionality such as bidirectional text.

Revision: 4634
Author:   [email protected]
Date:     2009-01-22 17:38:56 -0800 (Thu, 22 Jan 2009)
Log Message:
First part of glue code for allowing Halo components to use the new Text Layout Framework, in order to get functionality such as bidirectional text.
Background:
TLF is making this possible by implementing a TLFTextField class. It is a Sprite that uses TLF to implement the same properties and methods as the legacy TextField class in the Player. Thanks to the createInFontContext() bottleneck method in UIComponent, it can be used by a properly-written Halo component (such as those in Flex 3) without any modifications to the component.
Note: Text should render similarly -- but is unlikely to render identically -- when a component uses TLFTextField vs. TextField. The width and height may be different, affecting layout; text could wrap differently; etc. This is a fact-of-life based on the fact that TLF/FTE and TextField are completely different text engines.
Whether a Halo component uses TLF or not to render text will be determined in Flex 4 by a new style, textFieldClass. (Gumbo components always use TLF.)
TLFTextField is currently only partially implemented. It does not yet support scrolling, selection, editing, multiple formats, or htmlText. Therefore it can only be used for simple display text, such as a Button label.
Details:
The TextStyles.as bucket 'o text styles now includes a non-inheriting textFieldClass style. It can be set to either mx.core.UITextField or mx.core.UITLFTextField. These are the Flex framework's wrapper classes around the lower-level classes flash.text.TextField (in the Player) and its TLF-based workalike, flashx.textLayout.controls.TLFTextField.
The global selector in defaults.css currently sets it to mx.core.UITextField using a ClassReference directive. For the time being, all Halo components will continue to use the "real" TextField.
The new UITLFTextField is a copy of UITextField, except that it extends TLFTextField instead of TextField. This class has been added to FrameworkClasses.as because no classes in framework.swc have a dependency on it. It will get soft-linked into applcations via the textFieldClass style.
The TLFTextField class currently lives in a fourth TLF SWC, textLayout_textField.swc. This SWC has been added to various build scripts. The external-library-path for building framework.swc now includes all four TLF SWCs, because UITLFTextField can't be compiled and linked without them. However, since they are external they aren't linked into framework.swc.
Properly-written Halo UIComponents access their text fields only through the IUITextField interface, and they create text fields like this:
textField = IUITextField(createInFontContext(UITextField));
(The reason for using createInFontContext() is to support embedded fonts that are embedded in a different SWF.)
The createInFontContext() method of UIComponent has been modified to use the textFieldClass style to determine whether to create a UITextField or a UITLFTextField.
With these changes, you can now write code like
to get two Buttons, the first of which uses UITextField (because this is the value of textFieldClass in the global selector) and the second of which uses UITLFTextField. They look very similar, which is good!
Currently, both Buttons are being measured by using an offscreen TextField. A subsequent checkin will make components rendering using UITLFTextField measure themselves using an offscreen TLFTextField so that measurement and rendering are consistent.
QE Notes: None
Doc Notes: None
Bugs: None
Reviewer: Deepa
Modified Paths:
    flex/sdk/trunk/asdoc/build.xml
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/frameworks/projects/framework/build.xml
    flex/sdk/trunk/frameworks/projects/framework/defaults.css
    flex/sdk/trunk/frameworks/projects/framework/src/FrameworkClasses.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/metadata/TextStyles.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UITLFTextField.as

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

Use the new CE 7.1 NWDS for developing 7.0 Portal Applications

Hi all,
We currently evaluate which would be the best development studio for our development. Of course I know the SAP Guideline "use the same NWDS as your support package stack". This would mean we have to use NW 7.0 SPS 16. But we realized there is a new Eclipse Version within CE 7.1 NWDS.
So the question is, could we also use the new NWDS, is it compatible with 7.0 or did anybody try something in the way we want to do?
Thanks for your help,
Stefan

Hi Stefan,
You might want to consider using the "federated portal network" (FPN) capabilities of SAP NetWeaver 7.0 and CE7.1.
FPN in this case allows you can utilize the full composition capabilities of NWCE7.1 to develop applications and then render them in a central 7.0 runtime environment (portal). This is loosely called the "side-car approach".
For more information: http://help.sap.com/saphelp_nwce10/helpdata/en/3e/878ce2eba747e2b065cfb5d4496483/frameset.htm
Michael

Can I use the new Firefox Beta for Win 8 on a non-touch screen computer?

I installed Win 8 on my somewhat old laptop (3 and 1/2 years old). I don't have a touchscreen on it, I don't want to use Internet Explorer, and I badly want to use the new tile Firefox and help it's development. I installed it and tried to enable tile mode but it is not offered in the settings at all. Is it possible to use it without a touchscreen?

Hi Marko,
Unfortunately work on the tile interface was discontinued due to low interest. You can find more information here: https://blog.mozilla.org/futurereleases/2014/03/14/metro/
The code lives on, so the project could well be restarted in the future. But for the time being you can only use Firefox in its traditional "desktop" interface.
Sorry for the bad news!
Jayelbe

Are there any new All-in-one printers for sale that use the CLI-221 cartridges?

We have a MX870 Printer that needs to be replaced but new cartridges were just purchased from Canon. Are there any new All-in-one printers for sale that use the CLI-221 cartridges?
Thanks,
Margaret

The MX922 (known as the MX926 in Australia) is supported by 10.10 and Windows 7. Whatever site you were looking at may not have updated their details. Here is a link from the Canon Australia web site showing the drivers and applications for this model for 10.10.

Migration of balances for new ledger using the New GL

Similar Messages

Maybe you are looking for