Migration of data from one user profile to a new (to me) Palm

I lost my Tungsten E2. bought a used Tungsten T2 as a replacement. I need to move all my data and programs from my desktop to the new handheld?
How do I do this?
THanks!!!
S
Post relates to: Tungsten T2

You will need to hard reset the E2. Change the hotsync conduits to desktop overwrites handheld. Connect the E2 to the PC and select to sync with an existing username. Select the username that has all your data and complete the sync.
The hard reset will erase all data on the device. Make sure you sync to the PC to backup your data.
Click on the following link to the kb.palm.com webpage for the article regarding reset procedures
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
The best way to preserve your data is to export the data in each application in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/tungsten/e2/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Message Edited by cygnusX1 on 10-07-2009 09:23 AM

Similar Messages

How can I migrate my data from one user to another (to eliminate a previous owner's shortname?)

I purchased a Macbook Pro second hand a couple of years ago and whilst I immediately changed my user name, didn't realise that the previous owner's short name still exists (I was a bit of a Mac virgin at the time!). I now have tonnes of documents, applications, settings, bookmarks, etc. which are assigned against the previous owner.
I've now bought myself an iMac and before I migrate from the older machine to the new iMac, I wish to remove all trace of the previous macbook pro owner.
In researching how to change the shortname user, I've tried virtually everything and everytime have to resort to time machine to restore my settings, desktop, etc. I simply cannot get this to work. Even what seems quite a comprehensive article and procedure didn't work i.e. "full monty" section of the following: http://www.macworld.com/article/1132693/changeshortusername.html
Having failed miserably using different techniques and subsequently having to restore three times from time machine which is costing me hours upon hours, I'm absolutely frustrated at how to do this ... all I want to do is migrate everything to a new user account and delete the old user and previous owner.
Surely someone out there can provide a fool proof, simple and effective method to migrate the user data and keep intact?
Please help if you can!

Pondini wrote:
The only possible downside to this is, the transferred account may lose permission to the files on previous backups.
Actually, there is a way to prevent that, also a bit odd. On the old Mac, go to System Preferences > Accounts and unlock the padlock. Control-click (right-click) the account you want to delete in the sidebar and select Advanced Options. That will bring up a window like this:
DO NOT CHANGE ANYTHING ON THAT WINDOW. Just note the UID number.
When you start up the new Mac, the first account created (during initial setup) is automatically assigned #501. The next is 502, etc. What you want to do is, after creating the first account, Restart and set up one or more temporary accounts in a way that will include that number; then set up an additional one (an Admin account with the identical names as the one you want to trash). Then log on to the additional one, delete the temporary ones and Restart your Mac (to finish clearing the numbers).
Log on and run Migration Assistant as above. That way, you'll get the prompt to rename it as above, but the UID it has will not be a duplicate, so Migration Assistant can transfer it "as is."
Message was edited by: Pondini

Process to migrate configuration data from one BW development system to other

Hi SAP Gurus,
We need to migrate configuration data from one BW system DE1 to DE2.. Both systems are SAP net weaver 7.3.
DE1 is BW pre-production system and DE2 is BW DEV.
No transactional data required.
Please share a document if available.
Kindly, let me know the procedure for Remote Client copy or client export/import with steps.
Also let me know the pre-requisite for these activities.
Thanks,
Avadhesh Sharma
+91 8095226536

Hi,
Remote Client Copy (SCC9)
Remote client copy is performed in rare situation. When the client copy is done
between two different SAP systems, the copy is called remote client copy.
Before remote client copy is performed, a RFC connection must be set between those
systems using SM59.
1. Check RFC connection is working fine between two systems you want to perform
remote client copy using SM59
2. create client in the target system you want to copy the client
3. login to target client using user SAP* and password PASS
4. execute tcode SCC9 and select the RFC for the source system
5. select the profile you want to copy like SAP_ALL
6. select source client number you want to copy
7. Select source client master data , mostly it is the same client number
8. Now click on schedule as background job.
9. Leave the background server field blank.
10. Click schedule.
11. Select Immediate from next screen.
12. Save the screen.
13. Client copy is scheduled now as a background job and client copy process started.
14. The progress can be monitored using tcode SCC3
Client Export/Import
A client transport consists of two steps:
First a client export extracts client data from the source client
to files at the operating system level. Then the data is imported
from the operating system files into the target client.
To perform a client export, follow these steps:
1. Log on to the source client. From the SAP initial screen,
choose transaction SCC8 (Client Export). Select the data to
be copied using a profile.
2. Indicate the target system to which the client will be copied.
The target system must be defined in TMS as part of the
transport domain.
3. Begin the client export. Because copying is a lengthy
process, use scheduled background processing.
Do not run any other client copy tool before the
data export is finished.
This export process will generate up to three data files at the
operating system level:
• RO< number >: this file contains cross-client data
• RT< number >: this file contains client-specific data
• RX< number >: this file contains SAPscript texts
Depending on the type of data selected through the client
transport profile, the client copy command files added to the
buffer of the target system are as follows:
• <S-SID>KO<number>: this file is for cross-client data
• <S-SID>KT<number>: this file is for client-specific data
• <S-SID>KX<number>: this file is SAPscript texts
The client export change requests are not imported when an
Import all takes place. Therefore, you must import these requests into the target client
using TMS. Choose one of the transport requests of the client transport in the Transport
Management System (TMS). The other transport requests belonging to this client
transport are then automatically added in the correct order.
After the import process has completed, post-import activities are required for object
generation steps. After completing the import, log on to the target client. From the SAP
systems initial screen, choose transaction SCC7
Regards,
Chandu

How do I move all my files from one User Profile (account) into another? I needed to create a new account and want all of my files accessible in the new one.

How do I move all my files from one User Profile (account) into another?
I needed to create a new account and want all of my files accessible in the new one.

ok, what you're learning right now is 101 unix, which is good. Unix is a good thing
now: the way unix works, and macos (which uses unix underneath) the files and folders work like a hierarchy.
the start of that tree is /
so, if you were to do:
cd /
(cd means change directory)
it will bring you at the highest branch of the file system.
cd /Users
will bring you to where all the users are.
to see whats in /Users you can use your friend ls command
ls means list files/directories
so:
cd /Users
ls -la
(the -la here means show all (even hidden) and long format (very verbose)) this flag is very optional.
you will see
fred
user2
for example.
if you want to see the desktop of user2 you would change directory to it then list the files.
for example:
cd /Users/user2/Desktop
Note that the files and directory are case sensitive, so, desktop is NOT the same as Desktop, or DESKTOP
ls -la
you should then be able to see everything in users2 desktop
you could have done as well the same thing in smaller steps, for example:
cd /
cd Users
cd user2
cd Desktop
this is the equivalent of cd /Users/user2/Desktop
So, for your file, i don't know where it was, but know that if you log in as user2, it will directly put you in
/Users/user2
which most likely the file you had created from the other user was in /Users/user1
if you copied all the files from /Users/original_user to /Users/secondUser
most likely yes, all your mail, bookmarks etc would be copied over.
so in your case.
sudo chown -R seconduser:staff /Users/secondUser
should work
Remember that if you start a path with the character / it means start from the root of the file system, at the highest top you can ever get.
so
cd /Users/fred
is not the same as
cd Users/fred
unless you were in / already
i know it may be confusing at first but it's actually very logical if you play with it.
to simplify, think of it that / means C:\ on windows
you can't go any higher than C:\ (in a way)
if you're unsure which directory you're currently in, you can always type:
pwd
it will tell you where you are.
for example:
cd /
pwd
this shows /
cd Users
pwd
this now shows /Users
cd /System/Library
pwd will show /System/Library
cd /
cd /Users
cd fred
cd Library
pwd will show /Users/fred/Library
unix can look very scary but it's actually vital and very necessary to do tasks sometimes that would take for ever to do via the windows. This is good learning.
so for the myfile you had created, i can't tell you where it is, at the time you created, if you can do a pwd command you'll know the path,
ls -la (this shows all the files where you are)
if you see myfile in the list
do a pwd
whatever is return, the real location of the file would be:
whatever pwd returned / myfile
I hope that makes sense.

Help for transfering data from one user' all tables to another

Hello guys,
I have trim the extra sizes of columns in almost all tables of my database. Before doing this, I saved the data of tables by creating another user "User1" with the same objects and importing dmp file in it. After this I cleared my original objects and reduced the extra sizes of columns alomost in all tables.
Now I want to transfer data from backup user "User1" into my original user's "User" tables.
Can any one guid me with the way of doing so, so that I could do it just through 3 or 4 lines of code instead of individualy table wise transfering the data...??
regards
Kashif

SQL> select 'insert into '||table_name||' as select * from user1.'||table_name ||' ;' from user_tables where table_name in ('EMP', 'DEPT') ;
'INSERTINTO'||TABLE_NAME||'ASSELECT*FROMUSER1.'||TABLE_NAME||';'
insert into DEPT as select * from user1.DEPT ;
insert into EMP as select * from user1.EMP ;
2 rows selected.
SQL>You could spool the output of the query above to a .SQL script file and then just run it within the same script using @@script_name.SQL.

I can't migrate my data from my old pc to my new macbook pro

Hi,
I have been trying to migrate my data from my PC to my new mac but it always seems to fail.
At first, I would begin the migration assistant and then after a while the PC would just crash.
But then I finally thought I managed to get it working. It said that process was complete (on both the PC and mac), but there was no data on my computer and no music in my iTunes.
If anyone has any advice I would really appreciate it!!
PS I also have an Ethernet cable if that's of any use but I don't know how to use it.

I suggest you stop using the Migrastion Assistant. Simple fact is, as you have found out, that it does not work most of the time and when it fdoes actuall transfer data it doesn't do it very well.
Just network the 2 computer together over your LAN and copy and past the files you want to move to the Mac.
Otr use an External drive, formatted either FAT32 or exFAT (doinig the formatting on the Windows PC) and then copy to the external from the Win PC and then copy from the external to the Mac.
You'll be happier.

How to move all app data from one user to another? (One mac)

Hi. I've been having this problem for a while. So recently, I've made a new account for myself, since I was using my mom's user account. I don't want to keep all of my files, emails, and icloud on her user, since it's used by everyone in my family. I use iMail now because hotmail blocked my email because "Someone hacked me" and they kept it locked for all these months, and I can't give enough proof to show it was mine, since I forgot every email I've sent now.
And iMail is pretty cool, adding your own rules and stuff. Except you don't need a password to log in. I just deactivate my iMail via system preferences as a log-out, and then re-activate it as a log-in.
So, back to the question.
How can I move ALL app data from my mom's user account to my new one? Her acount also has pictures of our germany vacation. So not every file.
You see, I game on my mac mostly because steam is really complicated, using internet just to play a game that doesn't need internet and stuff.
And steam doesn't have a lot of casual games.
So I want to move my game data, save files and every little piece of application info that my games have on my mom's account to mine. I've asked this question on Yahoo answers, and all I got was an answer of "File IS data, or datum itself, You are wrong. I cannot give you an answer." -.-
I'm not experienced with terminal either, so I'll need a ton of explanation of how to use it if that's how it can be done. It really really confuses me and I'll just give up.
Thanks in advance.
Oh and, side question, When will OS X Mavericks be open to public and how much will it cost?

Nour j wrote:
Oh and, side question, When will OS X Mavericks be open to public and how much will it cost?
http://www.apple.com/osx/preview/
Will be released sometime in the fall. Cost unknow at this time as Apple has not released this info to the public.

How do I access data from one user account to another?

I want to access data from a different user account. How do I make all the files available?

I have another post here in the forum that explains in detail about the rez problem. It was read by a lot of people with no responses. 1 thing that might be important is that I was using a Wacom drawing tablet when this problem started. I removed the Wacom software and no help.
My Apple 23" Cinema display has very large icons but the display prefs says it is at 1920 x 1200. It's not just a low screen rez but the dock and all icons will scroll on the screen when I move the mouse.
The resolution will not change to anything else. The rez is fine on other user names.
I have booted from the Apple DVD and run disk repair, repaired disk permissions. Booted and run Tech Tool.
Booted from the Disk Warrior cd and ran that.
I have zapped the PRAM. I have plugged the display into the other port on the video card.
When I change to the problem user name it is fine for about 1 second and then changes to the "problem". I have never seen this before and I have been using a Mac since 1990.
It's a G-5. Dual 2.0 ghz. 2.5 gb ram. OS 10.5.8. Apple keyboard. Logitech mouse and
Thanks.

Migrate all data from one subscription to a new one

Hi,
I'm working with a customer that has been testing apps with the Azure MSDN subscription of one of their employees. They have purchased Azure though credit card and they are willing to migrate all the contents from the MSDN subscription into the new EA Azure
tenant (this includes Virtual MAchines, Databases, web services, among other things). Is there an automatized way to do it?
regards,

hi,
Firstly, I suggest you could refer to Gaurav Mantri's post(http://stackoverflow.com/a/12274767 ). It seems like there are a lot of thing need you do. Also, I suggest you could contact azure support
team to resolve this issue.
Support Channel:
Please connect to Azure support ASAP, it's free, and it's the best choice for you.
Please contact support team by creating a support ticket at http://www.windowsazure.com/en-us/support/contact/
Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Migrate Calendar/Contacts from one Exchange server to a new server?

I have an iPhone synced to my calendar and contacts on one Exchange server (old.edu). I am in the process of migrating to a different Exchange server (new.edu). Does anyone know if I can use the iPhone to be the conduit from server old.edu to server new.edu? e.g., can I sync iPhone with old.edu data on it to a computer that has a new Exchange server configured on its Outlook program and have the old.edu data copied onto the new.edu server?

No, you cannot. Exchange contacts data is synced 'over the air' only, and thus managed separately from iTunes (USB cable) syncing.
If you have Outlook connected to the old exchange server, you can export your contacts then import them after you link to the new server. But the iPhone is not going to help you in this situation.

How can I force migration of data from the old sync to the new?

I have two old instances of firefox (version 18 and 24) with sync set up; these are not accessible. How can I get the data from that account migrated to the new Sync backend without disconnecting these clients from Sync?

The old and new sync use the same backend but that may not help you here; if for instance; you were hoping to do directional merges.
Note the old and new syncs use a different account, and that the new sync only offers a merge option.
* [[How to update to the new Firefox Sync]]
*[[How do I choose what types of information to sync on Firefox?]]
Relying on sync alone to backup bookmarks could result in all devices having corrupt bookmarks listings.
If you have bookmarks involved I personally strongly recommend you manually back them up before making any sync changes, and thereafter do so at regular intervals - say every 2nd week. Sync is not good at handling large changes and large merges of bookmarks, corruption or duplication could occur.
* [[Restore bookmarks from backup or move them to another computer#w_manual-backup]]'''_manual-backup'''

Is there a way to migrate data from one user account to another simply?

Recently one of our employees has left the company. This user had pertinent images saved to their profile and we are needing to migrate those images to a new profile (Kiosk) so users can access the needed files. In InDesign I'm told it pulls file paths in order to pull up different images and documents. Is there a way to transfer these files without breaking InDesign? Or is there a simple way to recreate the file paths in InDesign so that we may move the user's information to a new account and recreate the file paths as soon as possible.
I was referred here from - http://forums.adobe.com/thread/1397569

It would be through scripting. If no one else answers here, try using the InDesign Scripting forum:
InDesign Scripting

Migrating my data from one system to another

Hi All.
We have an application hosted on one SAP system. Now the users plan to use another server to host the application.
All data related to that app (around 10 tables) need to be migrated over too.
Is there any other way than to write a program to download/upload the data to/from a text/excel file?
Anything we can do to avoid writing the programme?
Thanks.

Thanks Krishna. But can you please elaborate on what you are saying?
How to "Add table values" to the TR?
I thought we could only migrate if we had a maintenance view and from there it shall automatically include in the TR if we maintained it via SM30?
But here the case is diff.
It is an application table with no view. Lets say Table Z123. It has 5 fields with MANDT too.
Now around 1000 entries have been filled by the application (program). Now how do I migrate those 1000 entries to another system via TR?
Thanks again!

How to migrate Text data from one application to other

Hi All,
We've a old planning ASO application and users entered text data in data forms (Text cell) and also entered comments for the same cell
Is there any way that we can import the Text data & comments from the old application to new application (few Dimensions are different between the 2 applications)
Thanks,
PVR

Have you looked into using LCM as that can extract the relational data.
Cheers
John
http://john-goodwin.blogspot.com/

Migrating your data from one pc to another?

I recently installed photoshop elemens version 11 on a new laptop. I migrated the photo an film files. However, using the organizer the the files are recognized and shown, as usual. But the albums, created on the prevous laptop, were not recovered.

mtyj wrote:
I recently installed photoshop elemens version 11 on a new laptop. I migrated the photo an film files. However, using the organizer the the files are recognized and shown, as usual. But the albums, created on the prevous laptop, were not recovered.
How did you move (migrate) your files ?
The correct way fot the migration is:
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

Migration of data from one user profile to a new (to me) Palm

Similar Messages

Maybe you are looking for