Migration of Designer DB from NT to AIX possible?

The Designer Repository is running under NT with version 6i on OracleRdbms8. Are there any restrictions for migrating the Database/Repository from NT to Database8i on a AIX Server ? We don't use any "external "files or either generating Forms out of the Designer, just the database.
Thanking you in advance.

Apologies for the delay responding to this.
You should be able to transfer the whole database using the Export utility (not the export feature in the RAU, which only exports the repository). Create a database on the AIX server and import the exported dmp file. Strongly recommend reading the server admin docs first (can't see any on OTN that go back as far as 8i)
Regards, Keith.

Similar Messages

  • Migration Repository DESIGNER 2000 (from 6 to 6i)

    Hi everybody,
    I'd like to know where can I find the script 'migrate_repos_privs.sql'. The propose of this script is to migrato users from the old repository version to 6i.
    I start with repository version 6 and I try to execute this script. The source of this script try to call 'jr_sys_privs.ins' package internally but it doesn't exist in old repository. The result obviously is an error 'pl/sql called not found'.
    This is the fouth step (4/5) in the tutorial instructions. Next I'm going to push the 'migrate repository' button in the tool to complete the migrate process.
    Thanks. (Please, send me copy of your answers to: [email protected] )
    Best regards:
    Richard.

    Hi,
    The MIGRATE_REPOS_USERS.SQL script is generated when you run the the CKGENUSR.SQL script (step 12.1 of the insallation guide). In the box at the beginning of '12:Migration of subordinate users'it describes how when you run CKGENUSR.SQL it generates the MIGRATE_REPOS_USERS.SQL to your working directory.
    check your working directory after running CKGENUSR.SQL you should find the script there.
    Rgds
    Susan Duncan
    Oracle Designer Product Management

  • Migrating to Designer 6i from earlier version

    Hi,
    I'm attempting to migrate our old repository to that of Des6i. I have gone through the steps to set up a new repository, and am now at the crucial point where I run the 6i Repository Admin Utility and hit "Migrate A Repository". I entered the username/password for our old repository, and I get the error:
    "A Designer/2000 Repository has been detected. However its version is not compatible with the Migration Process.
    Migration is supported for Designer/2000 Repositories at version:
    Oracle Designer/2000 Repository (TM): Release 7.0.4.0.0 Production
    The Designer/2000 Repository you have nominated is at version:
    Oracle Designer/2000 Repository (TM): Release 6.0.9.0.0 Production"
    However, as far as I'm aware (based on the Installation Guide that was installed with Des6i), it SHOULD work - in the "Migrate data from an existing repository into a new one" section, it reads:
    "To use a repository from a release of Oracle Designer earlier than 6i, you must migrate the data in it from a live Release 2.1.2 or Release 6.0 repository...into a Release 6i repository that you have already created."
    Is this not correct? Or am I being tripped up in the wacky world of Oracle version numbering?
    Any advice appreciated.
    -a

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by wspotter:
    Help Migration specialist
    I get about a third into the migration of a 6.0 to 6i migration when I get an error message that says something about not able to create table upg_rm_text_lines. This error causes further errors which lead to an incomplete migration. What do I do?<HR></BLOCKQUOTE>
    I have exactly the same problem. Did you get a solution for it?

  • Migration of Designer Owner from 7.3.4 to 8.1.7

    My goal is database import from Oracle 7.3.4(Windows NT 4.0) to Oracle
    8.1.7( Linux 7.1).
    But, I have problem with importing Objects of Designer Repository Owner(
    no matter whether Designer 2.1 or Designer6.0).I gave Designer Repository
    Owner all necessary privileges an roles,but import just hangs! I can't
    find in log some exact information.
    Thanks in advance!

    I do that-full export,then full import.Then I found out that Designer Owner makes problem.
    I tried to import only Designer Owner, but it didn't work again!

  • Any problems with migrating In Design files from Mac to PC?

    My wife is a commercial artist, and we are considering getting CS4 here at home on our PC.  She has a Mac at work.  Are there any problems with switching files between the Mac and the PC so she can get some work done on the same files at both the office and at home?
    Thanks!

    One recurring problem I have is the different types of the Symbol font. Mac InDesign insists on adding (TT) -- "Symbol (TT)" -- to 'Windows' documents, and vice versa. I think the root of the problem is Symbol on Windows is an OTF font, whereas on the Mac it's still a 'regular' TTF. My Mac compadres tell me it's not easy to transfer the Windows font to the Mac -- its own version apparently being rooted deep inside the system.
    However, it's not a big issue, as we by default encapsulate Symbol with a character style. So when ID alerts us, all we have to do is redefine this style, be it on Windows or on Mac. Fortunately I've never seen text reflowing because of this (knocks on plywood desk).

  • Migration Oracle db from solaris to aix

    Hi,
    I would like to ask you for a best way how to do..
    We have a large international Oracle migration effort from Solaris to AIX. We have some challenges where a standard export/import will not work due to the extended distance between sites. As an example we are migrating from Japan to Texas.
    What is the best tool to use?
    I looked around and I found Oracle Golden Gate.
    do you have any other idea?
    Thank you,
    Regards,
    Tom

    807813 wrote:
    I dont have more info about the project but there will databases (maybe 500) with different sizes (x MB - x TB) and there could be single and RAC.
    I am looking for any tool/utility where I will be able to prepare migration document which could be used as baseline for migration all of them.I do not think it will be possible to use one approach for all DBs in your case. You should split DBs into groups you may use different approaches.
    Among 500 DBs will be:
    a) databases with "low availability" requirements where long downtime is possible. so you can stop app, take an export, import into remote db, re-target app to new db.
    b) databases where only short downtime is possible. then you can use DataGuard or some replication technologies (OGG, Shareplex, DataCurrents) to make "final sync".
    c) databases with "high availability" requirements where NO downtime is possible. Here you can use some replication technologies (i.e. DataCurrents and may be others can do it). First you copy data to remote DB and "remember" SCN you got the source dump, then you keep replicating all changes starting from this SCN. As soon as remote DB becomes in sync, you quickly switch the app to new DB.
    But I never did migration accross states (more than 1000 miles).Distance does not matter. You should have good bandwidth network connection between sites.

  • Migration of SAP From Windows to AIX

    Gurus
    I need information regrading migration of SAP ECC 6.0 on Oracle from Windows to AIX.
    Thanks

    Hi ,
    You will find information in the System Copy Guide .
    https://websmp104.sap-ag.de/instguidesNW70
    SAP NetWeaver 7.0 (2004s) --> Installation ---> <download the suitable system copy guide>
    You would also find lot of SAP Notes , go through them and let us know if you have any specific questions/concern.
    Regards,
    Neel

  • Migrating from Solaris to AIX

    Hi
    We are planning to migrate from Solaris to AIX. What document will help me to follow?
    If possible send me exact link.
    Our current environment is R/3 4.6c, Oracle 9.2.3 and Solaris 5.9
    Please let me know as quickly as possible.
    Thank-you

    > We are planning to migrate from Solaris to AIX. What document will help me to follow?
    Start with
    http://service.sap.com/osdbmigration
    --> FAQ
    where you will see, that you need a certified migration consultant on-site to do that migration.
    > Our current environment is R/3 4.6c, Oracle 9.2.3 and Solaris 5.9
    since that version is out of support for a long time there are no more official migration guides available, that must be covered by consulting. Technically it will be done by R3SETUP with DBMIG.R3S as parameter file.
    Markus

  • Can we migrate SharePoint Designer 2013 workflows from DEV to UAT to Live without any issues? Any bad experiences?

    Hi there,
    1. Can we migrate SharePoint Designer 2013 workflows from DEV to UAT to Live without any issues? Any bad experiences?
    2. When we deploy these workflows - does IIS need a restart?
    Thank you.

    That depends, did you create reusable workflows? Those can be deployed to another environment (of course depending on dependencies within the workflow itself)
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • Problem on upgrading the designer repository from v1.3.2 to Desig6

    Hi folks,
    I have a database 8.1.6 running on SunSolaris. I migrated a database instance from v 7.3.2 which has the designer repositories (DES v1.3.2). Now after migrating the database to V8.1.6, I tried upgrade the repository through the Admin Util of Designer6, I'm getting the error saying that I have not granted the EXECUTE on SYS.LOCK and SYS.PIPE to the install. The desiger owner has these privileges granted to them already. I also tried granting this explictily and tried things and it was again comming up with the same error. So could some one advice me of what to do to get away from this problem.
    I ran a log and got the following
    CKRAU71 File '..\..\dgsource\rmdgnst.cpp' at line:305 -TOOL STARTUP-CKRAU71
    ================================================================================
    Oracle Designer/2000 tool CKRAU71 starting at Friday, July 28, 2000 21:47:22
    ================================================================================
    Diagnostics File:'\des2000.log' Level:24
    Component Trace ''
    CKRAU71 File 'cwcver.cpp $Revision: 10.10 $' at line:213 -TRACE-Could not find DLL/executable to register it (awre60.dll).
    CKRAU71 File 'cwcver.cpp $Revision: 10.10 $' at line:213 -TRACE-Could not find DLL/executable to register it (rmdg60.dll).
    CKRAU71 File 'cwcver.cpp $Revision: 10.10 $' at line:213 -TRACE-Could not find DLL/executable to register it (cwg60.dll).
    CKRAU71 File 'cwcver.cpp $Revision: 10.10 $' at line:255 -TRACE-Registered : CW NLS Message DLL (English) Version 2.0.24.0.0 - Production
    CKRAU71 File 'cwcver.cpp $Revision: 10.10 $' at line:207 -TRACE-Could not find language DLL ckrau20l.dll to register it. Trying ckrau20.exe
    CKRAU71 File 'cwcver.cpp $Revision: 10.10 $' at line:213 -TRACE-Could not find DLL/executable to register it (ckrau20.exe).
    Is there some thing I'm forgetting to see. I check the entire directory and notice that there is no ckrau20.exe file in. Is it some thing that I have to look under patches or etc.
    -Sam

    To clarify, your index entries were in the database but NOT defined in Des 1.3.2 model? Because if they were in the model, then I'd look back at your intermediate migration definitions to make sure the indexes were still defined properly in there.
    In Des 2.1/6.0/6i/9i/10g, Indexes are a separate sub-element (SACs) for a Table Definition. They don't have to be associated with a key structure. And in newer database versions, a PK / UK has an implicit index constructed for it in the database, so Designer doesn't bother showing you the Index in the model. Just the PK or UK itself (again, these are also separate SACs).
    And it's not clear where you're getting the error. During the generate? Or during the instantiation into a database? Neither situation is a common fault.

  • Oracle 7.x db from HP to AIX

    Hi,
    1. Can I use import/export to move the db from HP to AIX?
    2. Anything that should be changed due to platform change(i.e.
    any specific things
    for AIX)?
    3. Any useful documents for the task?
    Many thanks,
    Fat
    null

    Hi Chow,
    What you talk about will work. This forum deals with migrations
    from non-Oracle environments to Oracle. I suggest you contact
    Oracle RDBMS support directly. They have the most up to date
    support information on issues such as yours.
    Regards
    John
    Chow Yuen Fat (guest) wrote:
    : Hi,
    : 1. Can I use import/export to move the db from HP to AIX?
    : 2. Anything that should be changed due to platform change(i.e.
    : any specific things
    : for AIX)?
    : 3. Any useful documents for the task?
    : Many thanks,
    : Fat
    Oracle Technology Network
    http://technet.oracle.com
    null

  • Migrate to new iMac from old iMac and am getting 'incompatible software' message.

    Im trying to migrate to new iMac from old iMac and am getting 'incompatible software' message. I'm not sure what to do- can I revert back to snow leopard from mavericks?

    Hi Mark,
    If you install Mavericks, or in your case migrate from an old computer running Snow Leopard (or an earlier version of Mac OS X) to one using Mavericks, some of your software that was designed to run on older computers may not function in the new OS. See this article -
    OS X: About the incompatible software folder
    http://support.apple.com/kb/HT3258
    In particular -
    If you see a message indicating that you can't use "this version" of an app, contact the software's vendor or visit their website to see if a later, compatible version of the app is available. If you purchased the software from the Mac App Store, use Software Update to see if an updated version is available there.
    and
    During installation, OS X moves known-incompatible software to a folder named "Incompatible Software" at the top level of the startup drive. If this folder is present on your Mac, see what applications are in it, then check for available updates. To obtain a newer version of an Apple app, check the Mac App Store, or visit the Apple Store website.
    Regarding installing an older operating system on your new iMac, Apple does not support doing this, as described in this article -
    Don't install a version of Mac OS X earlier than what came with your Mac
    http://support.apple.com/kb/HT2186
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • How do I get rid of the Microsoft Setup Assistant loop? I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word, and stuck in a loop?

    I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word (for 2008), and stuck in a loop?
    Whenever I select Word Microsoft Setup Assistant appears, asks for feedback, then after selecting okay (both on saying yes or no to feedback) goes on to a registration page. When I click on this it says I've already registered so I just click okay, and then move on to a update page. After this, if I click on Word, the process repeats itself.
    As I said, I don't have the disk to reinstall, and can't find the Office Settings to delete as many pages have suggested I should try. Safe Boot restarting also hasn't worked... Really stuck and need Word very soon for work.
    If you can help, that would be great, and feel free to ask any questions about the situation as I'm not an expert here.
    Cheers,
    Jack

    First, export your contact from iCloud.com and save them on your computer in a safe spot some where (like you desktop).  Use this to help you do this: http://support.apple.com/kb/PH3606
    Next, on both of your devices, go to Settings > iCloud and turn on contacts and select Merge. Then turn off contacts and select 'Delete form my [device]' when prompted.
    Now go back to iCloud.com and select a contact (yes they will all be messed up again) and select Command+A on a Mac or Control+A on a PC to select all of the contacts.  Tap the delete key on your keyboard (or right click /control click a contact and select delete).
    You iPhone, iPad and iCloud.com should not be empty for contacts.
    Go back to Settings > iCloud on both devices and turn on contacts again (you should not see merge this time).
    Next, go back to iCloud.com and import your contacts (those exported .vcards).  You can either drag and drop them into the empty contacts list in your web browser, or you can use the gear icon to import.
    You cleaned up contacts should import correctly into iCloud.com and sync to both of your devices.
    Good luck.

  • Migration of  Approved Invoices from 11i to R12

    Hi All,
    I am migrating all approved invoices from 11i to R12 using Invoice Interface tables and "Payables Open Interface Import" Concurrent program.But in R12 the Approval status changes and to "Required" and the Accounted status of distribution line changes to Unprocessed. We do not have the set up for approval work flow process, So the invoice should be validated by "Force Validation" by checking the ‘Allow Force Approval’ in payable options. But when I am running the "Invoice Validation" program the theere is no change in the Approval status.
    Please help.
    Thanks in Advance,
    Subhrakant

    I am a newbie to Oracle Apps. I guess Oracle Apps use the "sequence" to generate the Key in the Oracle tables or is there some else mechanism.
    When migrating Oracle Apps from lower version to higher version, is there any concept of setting the sequence numbers in Oracle Apps or we don't need to take care of this ie the migration handles this automatically.The migration/upgrade script/driver should take of seeded objects,
    For your custom objects, you need to verify it yourself.
    Thanks,
    Hussein

  • Migrating a webi report from one environment to another using import wizard

    Hi Everyone,
    Can anyone please tell me what all access should I have on my ID to be able to migrate a webi report from one environment to another environment(e.g. from development to quality).
    Regards,
    Neeraj Sharma

    Hi,
    To use the Import Wizard utility, you basically need Administrator, Full Control to Top-level folder, and "Add objects to the folder" and "Edit objects" for this user on the root folder.
    You need the least restrictive role, because you require absolute control for content promotion between 2 entitlement systems.
    the webi document is the cherry on-top,  you;ll have universes, connections, folders to bring over too. 
    Regards,
    H
    p.s. check Note 1450708 - How to restrict access to the Import Wizard from a Business Objects Enterprise system
    and
    Note 1297121 - What rights needed to use Biar File Extraction for a normal user while using Import Wizard ?

Maybe you are looking for

  • Adobe Muse won't publish (Error uploading file)

    After making simple animations using Adobe Edge Animate it seems as though none of the assets will publish with my site after importing them into Muse. In Edge animate I saved for "web animation" and published. Then I went to muse and hit "place". I

  • XML payload in RESTful webservice

    Hi all, Can anyone please suggest on how to call the RESTful webservice (which is used by our client) by passing an XML payload from a PL SQL stored procedure? It is for the authentication purpose. And the username and password has to be passed as th

  • How to change the client

    Dear Friends , we have a portal and the users are maintained in R/3 that means UME is R/3 . Now when i have to give the access to the users to use ESS applications they are not bale to view ESS role since the portal is mapper to client where the user

  • Note 951952 - Incorrect excise values if batch split in MIGO for import PO

    Dear participants, We have applied Note 951952 - Incorrect excise values if batch split in MIGO for import PO, for following issue, While doing import goods receipt for batch split quantity, excise base value is calculating for entire amount not by s

  • [svn:bz-trunk] 17102: Rewrite all ImageSnapShot tests to avoid any timing issue on various app server .

    Revision: 17102 Revision: 17102 Author:   [email protected] Date:     2010-07-28 11:48:20 -0700 (Wed, 28 Jul 2010) Log Message: Rewrite all ImageSnapShot tests to avoid any timing issue on various app server. Modified Paths:     blazeds/trunk/qa/apps