Migration of documents from a http content server into sap kpro und sap dvs

hello,
I want to migrate documents from an http 4.5 content server into the sap knowledge provider (kpro) and in sap dvs with an abap program.
I know I have to create a PHIO and a LOIO and write it in the tables DMS_PH_CD1 and (only the LOIO) in DMS_DOC2LOIO.
Where I have to write my url for accessing the document on the content server?In which table?
What fm´s do I need to create the PHIO´s and LOIO´s?
Has anyone an idea and hints (like weblinks) to integrate documents from an content server into kpro and sap dvs?

Hello,
the private key, where the hash is signed with is stored
in your AppServer directory $DIR_INSTANCE/sec and is
called SAPSYS.PSE. Where the PSE is a secude (www.secude.de) specific format which contains the private and the publik key.
But I guess you won't get the private key, because its private, unless you are the Administror
Then signig is done via the normal industry standards. (http://www.rsasecurity.com/)
regards,
mumba.

Similar Messages

Migrate the document from database to Content Server

Dear All;
There is a ECC6 using for 5 years and I am setting up a External Content Server which link to this ECC6 server, from now on the new incoming documents like scanned document, email etc will save to Content Server.
However, for the past 5 years those old incoming documents that save in the ECC database, how can l migrate it to Content Server? In the past the document mostly save with GOS (generic object service) option.
Please advise.
Thanks
Jordan

Hi Jordan,
from DMS point of view I would recommend you to see the reports DMS_KPRO_CONVERT and DMS_KPRO_CONVERT2 which can be used to transfer original files from older storage to KPRO storage logic.
If you want to move the originals from an archive or vault to a Content
Server, please use the DMS_KPRO_CONVERT and DMS_KPRO_CONVERT2 report I
would kindly ask you to see teh documentation on DMS_KPRO_CONVERT report
in transaction SE38, which explains the whole process and gives
necessary information.
This conversion program offers two possibilites:
- Complete migration:
The meta data of the document info record and the checked-in original
application files are migrated together. The checked-in original
application files are transported into the storage catgories.
- Step-by-step migration:
In the first step meta data is migrated. The original application files
remain in the old storage data. The migration of original application
files starts after you have processed the files with the integrated
viewer and checked them into a secure storage area.
I hope this information could be useful for you. Further I would
really recommend you to get in touch with your local consulting
organisation because this is a very critical and individual process.
To grant that the whole migration is done correctly I can only advise
you to contact your local consulting organisation.
Best regards,
Christoph

Migrate documents from the windows file server into km

Hi All,
I have around 100 GB of documents in a file server and i want to migrate the same data in to KM.
I am sure that there should be some standard process to do this,can any one please help me out in solving this.
Thanks
Ajay

Hi Ajay,
what do you mean by migrate? You could use a Windows Filessystem KM-Repository to integrated these files directly into KM (http://help.sap.com/saphelp_nw70/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm)
Otherwise you could use WebDAV (http://help.sap.com/saphelp_nw70/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm, http://help.sap.com/saphelp_nw70/helpdata/en/43/9600e5391e25dee10000000a1553f7/frameset.htm) or the Portal Drive (http://help.sap.com/saphelp_nw70/helpdata/en/42/c99b91341a6bade10000000a1553f6/frameset.htm) to copy these files in a (for example) DB repository.
Regards,
Holger.

TREX not working for e-recruiting with HTTP content server

We have a separate e-recruiting instance where we have only e-recruiting functionality installed. In this system we are using Storate type as "http content server instead of standard setting "SAP system database" for HR_KW content repository via transaction code "OAC0"
Following are the details
Document Area: HR_KW
Storage type : HTTP Content Server
Version no. 0046 Content Server version 4.6
HTTP server vd24cs02.sce.com
Port Number 8080 SSL Port Number
HTTP Script archive
Phys. path /usr/sap/N09/SYS/global/
Points to be noted:
1) TREX Search functionality for Job postings etc is not
working with this setting, however if we use HR_KW_CONT (storage type=03 SAP System database) , above mentioned functionalities work. We observed that xml files required for TREX search are also not getting created when we change the settings.
2) We observed that when we change the storage type the indexing job is successful but application log shows some failures in reading/modifying xml files
Please let me know what are the settings/ procedure to use a different storage type instead of standard setting delivered with the product. Anything related to the setting for above requirement

Hi All,
I may have a similary problem but I'm not entirely sure.
I have been tasked with setting up a simple java servlet to authenticate against a BOXI (Business Objects) server, from my tomcat server (tomcat 5.5) on my windows XP desk top machine. I will add more info on this shortly.
I have been supplied with a krb5.ini file and the bscLogin.conf file as follows:
bscLogin.conf :
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required debug=true;
krb5.ini[libdefaults]
default_realm = ADF.SOMEWHERE.CO.UK
dns_lookup_kdc = true
dns_lookup_realm = true
default_tgs_enctypes = rc4-hmac
default_tkt_enctypes = rc4-hmac
[realms]
ADF.SOMEWHERE.CO.UK = {
kdc = DC90.ADF.SOMEWHERE.CO.UK
default_domain = ADF.SOMEWHERE.CO.UK

Http content server

hello,
I want to create manually the KPro-metadata for documents. do you knwo which tables (like SDOKSTCA) I have to consider and make entries?
the next step is to migrate still existing documents on a sap http content server into the sap kpro and sap dvs.
which steps I have to made? which fm´s tables do I need?
is there any documentation in the web for this topic?

Check out this online help.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/58/2c0795e3914868ad716a524c158cb5/frameset.htm">Defining Content Repositories on the SAP Web Application Server</a>
Regards
Raja

Migrating data from Sun ONE directory server into openLDAP

Hi,
I was to migrate the data from Sun ONE directory server into openldap. Has anybody done this or know about this. Can you please share the steps that needs to be done.
NOTE: I have exported the data into LDIF file but when I run with ldapadd into the open ldap
ldap_add: Invalid syntax (21)
additional info: objectClass: value #1 invalid per syntax
Are there specific schemas that i need. Where can I find them?
Thanks

Why would you want to migrate data into an OpenLDAP server ?Good Question, let me explain you my problem with Sun DS.
No Question DS is the better product (even Red Hat realized this).
Problem: DS is not a base Solaris 10 OS component, for patch support
you need some additional plan, now sun marketing nightmare comes ;o)
Every year service plans are changed (want a SJES or a DS or a DSEE ?)
so use solaris with OpenLDAP, or linus with NSDS.
Sun please give us a Solaris Core Component called LDAP Server (no need for trillions of entries).
joe

Migration of SAP DMS documents from RFC Archive to SAP HTTP Content Server

Can anyone verify the correct OSS for the migration of documents from an RFC Archive repository (non SAP) in SAP DMS to a SAP Content Server HTTP Repository. Most of the OSS notes seem to indicate HTTP to HTTP migrations or based storage category migrations.
Which is the most suitable for this?
Edited by: Athol Hill on Oct 30, 2009 2:35 PM

Dear Athol,
If you want to move the originals from an archive or vault to a Content
Server, please use the DMS_KPRO_CONVERT and DMS_KPRO_CONVERT2 report I
would kindly ask you to see teh documentation on DMS_KPRO_CONVERT report
in transaction SE38, which explains the whole process and gives
necessary information.
This conversion program offers two possibilites:
- Complete migration:
The meta data of the document info record and the checked-in original
application files are migrated together. The checked-in original
application files are transported into the storage catgories.
- Step-by-step migration:
In the first step meta data is migrated. The original application files
remain in the old storage data. The migration of original application
files starts after you have processed the files with the integrated
viewer and checked them into a secure storage area.
Best regards,
Christoph

Indexing documents storaged in Documentum Content Server

Hello experts,
I've a question about how i can do the next project.
My development team wants develop in our SAP ECC 6.0 system an application that allows them work with the documents storaged in our Documentum Content Server, and after they must be able to search over does document contents an retrieve them from content server.
Basically, we need indexing the documents of Content Server for use it in SAP system.
It's possibily do it only with Documentum Content Server?? or we need SAP Trex??
Thanks
Regards.

Hi Sonia,
Refer the documentum server link below for required information
http://docs.oracle.com/cd/E10502_01/doc/search.1018/e10418/cmsources.htm
Hope this is useful.
Regards,
Deepak Kori

Linking a CRM case to a document in an external Content server - CRM 6.0

Hi,
We are creating a case from a scanned document, the document is stored in a separate content server. Now we need to link the created case to the scanned document in the content server. We need to be able to access the document/image from within the create case using WebClient
Kind Regards

Pradeep,
Yes my users are over a 10 state area geographically, with u201Cpotentialu201D handheld access to the documents that would be attached to functional locations and equipments using the CV0*N access. They would have no need to u201Ccheckout/checkinu201D documents in the field, but would need view access or print access from their field device via a work order wrote against the equipment or F.L. to which the documents would be attached. I envision a separate small group of users that would actually u201Cmanageu201D the documents themselves such as u201Ccheck out/update/check back inu201D to the separate server location where the file(s) are located.
I understand in principle (I think) the DMS storage, but again, if I select u201Ckprou201D (currently unselected for my document type) you make the following comments: u201C2. 'kPro Storage' option (may store in SAP DB,HTTP Content Server), herein you can store 'n' originals/documents and 'n' additional files, AND
HTTP content server You may either use the SAP Content Server or an external/third-party content server.Typically, content server is opted for when operating in a distributed environment(users accessing from several locations)/index based search is needed/n:n mapping scenario exists.
Logical repository
This storage type allows access to different physical repositories, independently of the client and the system ID.u201D
So based on these comments, are you saying I should select u201CKprou201D for my particular document type and that I should define the external server as either an u201CHTTP content serveru201D or either a u201Clogical repositoryu201D? If yes, then as I commented in my 1st ask, please advise how u201CI should use for "Maintaining the Storage System" since based on the selection of "Storage Type" whether HTTP content server or Structure Storage System, or Logical repository decides how the rest of your screen looks for further selection.u201D Thanks in advance.

How can i Migrate a database from DB2 to SQL Server 2008r2.

Hi Gurus,
Kindly help me letting me know the process for migrating the database from DB2 to SQL Server.
1) Is there any way to migrate a database from DB2 to SqlServer. (My assumption is we can not migrate database, if wrong correct me gurus).
2) Or we can only transfer data from that DB2 database to SQL Server (Using SSIS packages).
Please help me knowing the process to migrate the data from DB2 server to MSSQL server. Even am reading the documents available in the web.
Thanks in advance.. :)

Microsoft provide a migration assistant for DB2 to SQL Server:
http://www.microsoft.com/en-us/download/details.aspx?id=45296
SQL Server Migration Assistant (SSMA) is a free supported tool from Microsoft that simplifies database migration process from DB2 to SQL Server and Azure SQL DB. SSMA automates all aspects of migration including migration assessment analysis, schema and
SQL statement conversion and data migration.
Hope that helps

Decompress files in HTTP Content Server

Hello,
I have a problem with the consistency of files stored in HTTP content server. That is to say I have an inconsistency between the object and content of the linked file.
I have a controller program for consistency but I do not know how to decompress.
The files in the content server are compressed with CSCompress (I think). Is there a possibility to decompress this files ?
Tank you.
Michel

Hi Michel,
Conerning your questions regarding the possibility to decompress the
files outside the SAP system, I'm afraid this is not possible. The
document files are stored in a compressed format. Even if you managed
to extrace the files from the tables, their content still remains
compressed. In other words, you still have to rely on SAP Content
Server's decompression logic to generate the original content. The only
way to retrieve the files, therefore, is by using the SAP Content
Server HTTP Interface.
Regards,
David

Store archiving IDoc's to an HTTp content server

Hi Guru's,
I want to store the archived IDoc's to an HTTP content server.
i have created an content server on OAC2 and i dont know how to link the archived IDocs to an HTTp content server.
I searched many forums, but i cant get the exact solution for this.
Could anyone help me on this.. pls...
Thanks in advance,
murugan..

Hello,
I will take a final call on this - As i understand all the configuration is correct but not updating in link tables.
I also understand system Id is ok as PO and IDoC are working.
In Content repository creation for PO & IDoC you will be taking document area as Data Archiving but for Printlist content repo you have to select ArchiveLink.
If you have done above then check connectivity and send the certificate
In your Archive server (IXOS, EASY, DOCUMENTUM or so on ) Check same content repository is properly configured.. if possible refresh it. Check for certification from SAP.
You are facing connectivity issue so cross check carefull all archive server level.
Lastly check oss note
Let us hope for the best.
-Thanks,
Ajay.

ArchiveLink with SAP HTTP Content Server configuration using SAPdb MaxDB

We have configured SAP 4.7 to use ArchiveLink to store outgoing POs. The POs are in PDF format and are to be stored on an SAP HTTP content server using MaxDB. We believe everything is setup but when we go to retrieve a stored file, using and HTTP link we do not see the document. Here is a sample HTTP link:
http://company-sap20.company200-sap.com:1090//ContentServer/ContentServer.dll?get&pVersion=0046&contRep=ZT&docId=47E9C60A28145211E10000000A0126F3
Can anybody give me a few pointers?
What table in the MaxDB shall I look at? Where is the docID being passed to?

I'm sorry to say that I don't know.
AFAIK, the report gets documents from the document store. The Contentserver itself runs embedded in the Web-Server.
Besides the trial to write a trace file with the Contentserver (see Contentserver.ini somewhere on your Web-Server) I strongly recommend to open a customer message.
Regards Thomas

DMS Document Storage in External Content Server

Dear All,
We are working on a DMS scenario, where we need to store the document in an external content server, and not in SAP DB. We are evaluating the solutions around the content server, and we see that SAP provides a HTTP Interface to SAP Content Server, and this interface can be configured through OAC0 and OACT, and managed through CSADMIN. Now, a set of questions:
1. If we intend to use SAP Content Server, do we need to purchase additional license for it? Our understanding is that the software is delivered with SAP Installation DVD, and as such no licensing charges are required.
2. If we DO NOT intend to use SAP Content Server, and rather use an external content server (Possibly utilizing the File System at the OS level as a repository), how will the configuration of OAC0 and OACT look like in such a case? We definitely can not use HTTP Content Server as storage type, How will the entries be organized in this case?
Has anyone worked on a scenario like this? It will be really nice if you can share your experience and expertise in this regard.
Awaiting replies.
Thanks and Sincere Regards,
Sid

Hi Ravindra,
Thanks for the clarification. Do I understand correctly that, for a external content server (without an installation of SAP Content Server) also, we need to specify the storage type as HTTP Content Server ? But in such a case, how will the work processes be handled? As I understand, SAP Content Server engine will handle the incoming/outgoing requests through a Web Server. So, don't we need a similar arrangement for an external content server also? In that case, will the connection parameters be for a HTTP Content Server or for RFC Archive, where we can specify a RFC Destination of type G and connect through it?
Thanks and Regards,
Sid

Http content Server - putCert specification

Hello,
I am trying to develop a HTTP Content server for connection with SAP but I encounter difficulties while implementing security.
The methode putCert stores the certificate from SAP but it seems like it is a X509 v1 certificate and not a V3. like mentionned in the spec doc
Moreover SHA1 seem to be used and not MDS.
Is there any particular reason?
Thank you

Ok finally managed to implement security on the SAP Content Server.
this code snippet works:
     Provider bc = new BouncyCastleProvider();
        int i = Security.addProvider(bc);
        byte[] message2Sign = "E25B5CECB6846E1F4F92C9E9058BC415FDrCN%3DC1120071026161701".getBytes();
        String good = "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";
        String bad = "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";
        BASE64Decoder b64 = new BASE64Decoder();
        byte[] signature = b64.decodeBuffer(good);
        // get public key from cert
        File toto = new File("/tmp/toto.txt");
        FileInputStream fis = new FileInputStream(toto);
        PKCS7 test = new sun.security.pkcs.PKCS7(fis);
        java.security.cert.X509Certificate[] certs = test.getCertificates();
        //PublicKey pk = certs[0].getPublicKey();
        // construct PKCS7 data object
        CMSProcessable processable = new CMSProcessableByteArray(message2Sign);
        CMSSignedData s = new CMSSignedData(processable, signature);
        // get 1st signer infos
        SignerInformationStore signers = s.getSignerInfos();
        Collection c = signers.getSigners();
        Iterator it = c.iterator();
        SignerInformation signer = (SignerInformation) it.next();
        // verification
        boolean test2 = signer.verify(certs[0], "BC");
        System.out.println("Ok = " + test2);

Migration of documents from a http content server into sap kpro und sap dvs

Similar Messages

Maybe you are looking for