Migration of FR 11.1.2.1 reports from development env to production env

Hi everybody,
I have a doubt about the migration of Financial reporting (11.1.2.1 release) reports with LCM.
I set the permissions access to every single report and folder in the development environment. Now I have to migrate every objects to the production environment with LCM. Does this procedure migrate even the permission accesses to the target environment? Or do I have to set manually the permission accesses in the production environment?
Thanks
Pietro.

Check page number 25 there is a screenshot which is actually your security migration...If you are talking about access control for each object in workspace,then that is done when you actually migrate the reports...
Edited by: Vivek Chetiaparath on Jun 5, 2012 1:48 PM

Similar Messages

Unable to run a report from developer 10g

Hi, i can´t run a report from developer 10g when i run the report with the web icon appears the message
Thu Jan 07 14:44:29 CST 2010
javax.servlet.jsp.JspException
javax.servlet.jsp.JspException
     at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:470)
     at sif10r4400F202316.jspService(_sif10r4400F202316.java:50)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:575)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:311)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:834)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:340)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
my report server is up, my servlet is ok too and REPORT_PATH environment is ok.
Regards

Hi, i can´t run a report from developer 10g when i run the report with the web icon appears the message
Thu Jan 07 14:44:29 CST 2010
javax.servlet.jsp.JspException
javax.servlet.jsp.JspException
     at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:470)
     at sif10r4400F202316.jspService(_sif10r4400F202316.java:50)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:575)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:311)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:834)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:340)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
my report server is up, my servlet is ok too and REPORT_PATH environment is ok.
Regards

Transport user specific layout of standard report from developer server to

Hi ,
I am using user specific layout of standard report in my customizing report for retrieving data from standard report.
i want to transport this user specific layout of standard report from developer server (say client 400 ) to production server ( say client 100 ).
Also i want to copy this layout for all end users ( different user names ) in production server.
I tried to import user specific layout , it is possible only with in the same server ( say developer server , but different clients , say 400 to 450).
please help me to sort out this .
Thanks & regards,
Hari priya

hi sadaram,
Thanks for ur quick reply,
I am using this user specific layout in my zreport for retrieving data from std report. i don't want this layout to be global for all users. i already created same layout in production also , but i want to copy this user specific layout to some of end users
( not all end users) with different user names.
please suggest any solution to solve this issue..
regards,
Hari priya

How to migrate reports from Development QA Production environment

Hello,
we have 3 Oracle Discoverer 10.1.2.3 environments and I would like to know what is the correct way to migrate reports from DEV to QA and to PROD.
I'm researching about this by a couple of days and didn't find anything handy.
The most likely way that I found was to export the entire EUL from one environment to another with the eulapi with a command line like that:
exporting:
eulapi -connect DEVUSER/pass@orcl -eul DEVUSER -export exp_all.eex -all
importing using [ -import_rename_mode refresh ]:
eulapi -connect QA_USER/pass@orcl -eul QA_USER -import exp_all.eex -identifier -import_rename_mode refresh -log imp.log
That would work.
However if the developer delete some object from the DEV environment and then import in the QA environment the deleted object won't be deleted from the QA environment and after some time the QA and PROD environment would be a mess.
Another way that I figured out was to drop the eul from the PROD environment and then import all over. That would solve the problem but It has a lot of risks.
Thanks in Advance,
Jonas Zanon

Hi,
I think the best approach is to export the EUL components (e.g. business areas, folders, hierarchies, workbooks etc) separately from your development environment and hold these in a change management system. You can then import the components into test and prod and know which version of each component you have.
Often when you make a change you will have to export/import several components. For example, if you add a folder you will need to export the folder, any business areas that hold the folder and if the folder is joined to any detail folders then these as well.
We don't have scripts to delete components from production. Very rarely do you need to delete anything from production and generally it is not a good idea because reports will stop working because the references in the reports are missing.
Rod West

Questions on Analyzer Upgrade and Moving Analyzer Reports from Development to Production

Hi,We run Analyzer 5.0.3. We are planning to go to Analyzer 7.2. Did any body go thru this upgrade? If so, what is your opinion and tips that may help. Also, we never had Analyzer development environment. We are planning on having Analyzer development environment. In our installation, all of the Analyzer reports are centrally developed based on user requests. Once we have development and production at the same Analyzer version, if a report is developed in the development system, how can the report be mirateed/moved from development to production system?Thank you for your help,Prasant

Balaji,
Has this been done yet?
Gary
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
We are working on a document using which one should be able to move a portal instance from one database to another. It is still in draft version, once it is finalized we will be putting it on otn.
Thanks and Regards
Balaji<HR></BLOCKQUOTE>
null

Transporting Report from Development to Quality

Hi,
1. I need to transport Report & Custom Data Source from Development to Quality System. Please help me about procedure & prerequisites .
2. When I search a report from Business Analytics--> Design Reports . I need Hide some reports. Do we have any such possibility ?
Regards,
Rohit

Rohit,
As Eduardo said there is a possibility to Assigned to a Work center a way to make Reports visible to users. But from 1405 we can control the Visibility of Reports as per business role as well.
Please follow steps below to make this feature available:
1) Go to "Administrative Analytics Settings" configuration element.
2) Check the check box of " Allow the assignment of Business Roles "
This will show one more Business role Tab when you are trying to assign the reports.
Please see image for details.

SharePoint 2013 : Migration of customization from development server to production server

Dear all,
I have the following scenario and servers:
1. Development Server; (Server where our developers would develop our dms and/or enhancement based on change request)
2. Test Server; (Test server where our users will test the system (dms) and/or enhancement requested)
3. Production Server (Our production server where only our end users will have access , developers wont have access to this env.)
My question is how to migrate our changes from development server to test server and finally to production server?
Is there a mechanism/ guide /best practice approach for this?
Any help/guide would be greatly appreciated.
Many Thanks & regards
Vinay

Hi Vinay,
Thanks for posting your issue, Moving stuff from environment to environment will depending on your stuff;
Content, like list items and documents, can't be easily moved. They can be moved with 3rd party solutions, or custom code. You can do it with a C# solution or even using PowerShell.
Stuff like lists, libraries, master pages, CSS, etc. should be packaged in a solution file, either sand box or farm solution. This solution file can contain all of the assets you require, and then it can be deployed into a new environment, which then provisions
all the stuff you need (it could also load up test/sample data if needed)
Another nice solution, if you're working with a brand new site, is to back it up and restore it into another environment. That helps get the bulk of the stuff copied over, and then you can use one of the above methods for continuing updates.
Also, check out below mentioned URL to move content from on environment to another environment
http://www.sbrickey.com/Tech/Blog/Post/SharePoint_environments_-_dev_test_and_prod
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Transfer of report from development server to preporoduction server

Dear All,
I have created one report in Development Server(130) and now I want that report to be transfered from development server to pre-production server()300 for checking purpose. How i will do that. One more thing suppose my report is being transferred to pre-production. And again my reports need some changes then where and which server I will able to make changes in my program.

hi
any objects in SAP are transferred using the requests.
check whether your report is in some dev-class (package). if not assign a package and allot a request number for the report.
go to SE09 or SE10 t-code and you can transport to your desired server/system.
if you want to make any changes, you have to make that in development system. when you do so, it asks you again for a request number. give a request number.
once the changes are done, move the request number again to your pre-production. the changes get reflected there automatically....
thx
pavan

How to configure Crystal Report from Test DB to Production DB

Hi,
I have a VB/asp.net application that is currently using Oracle DB.
Now, I'm creating a new Crytal report that will connect using any userID, password, database, servername on runtime.
When I created the Crystal Report I used the Oracle OLE/DB connection using the test database logon information now I would like to make this dynamic at form load event which I have my crystal report viewer configured and then pass the dataset regardless if it is coming from test or production database.
Now, at form load connection using the test database I can see the report properly which I provided with the same logon information when the crystal report was created but when I switch the login using the production database, it doesn't get the correct datasource and logon information and it still uses the test datasource.
I would appreaciate if you can give me a solution or any links of the previous threads that has similar issue with resolution or any sample that may help.
Thank you,
Ryan

Hi Ryan
I'd start with these samples:
csharp_win_dbengine.zip / vbnet_win_dbengine.zip
csharp_win_subreport_logon.zip / vbnet_win_subreport_logon.zip
Link to the samples and others is in this wiki: Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
Next, I find the Crystal Reports for Visual Studio 2005 Walkthroughs to be an absolute gem (and it applies to all versions of CR and VS).
And of course, the developer help files:
SAP Crystal Reports .NET SDK Developer Guide
SAP Crystal Reports .NET API Guide
Now, one thing you don't mention is which APIs you are using; CR, or RAS - both of which may be available to you depending on the version of CR and VS you are using... RAS Developer Help files are here:
Report Application Server .NET SDK Developer Guide
Report Application Server .NET API Guide
The RAS APIs are a bit more complicated, but way more powerful. And there is even a utility that will write the DB logon code for you:
KBA: 1553921 - Is there a utility that would help in writing database logon code?
Finally, don't forget to search this SCN Space. Search box is in the top right corner. I find using short search string is best. E.g.; 'crystal net logon' will return a number of KBAs (notes), wikis, blogs, etc., etc.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Calling report from developer 10g in word program

My Dears:
I Wrote this code to open report in word program
web.show_document('http://127.0.0.1:8889/reports/rwservlet?report=c:\emp.rdf&destype=cache&desformat=RTF&userid=scott/tiger@test&paramform=no&MIMETYPE=application/msword');
I use this code in apps and work well
but when I work in out environment apps not work
thanks

Hi
client want to open all report in word program before I worked before in apps system and I use the previous code in oreder to be abel to help u i need u to answer these questions ...
do u mean that u were calling the web.show_document from forms 10g and it was working pretty good or where u would call it from and it was working good ?
and from where in ur program u r trying to call and it won't work ?
r u using webutil ?
Regards,
Abdetu...

Problems migrating application from development server to production server

Well, we succesfully migrated shared library, application settings and BRs, BUT we couldnt migrate permissions and more than half of total forms, possibly because of lack of permissions, could you please point me to the direction of some manual about migrating, or just share an advice.
Thanks in advance!

Version - 11.1.2.0.83
We did migration by LCM using this http://www.oracle.com/webfolder/technetwork/tutorials/obe/hyp/PLN11.1.2_LCM/index.html guide, Importing Planning Applications from the File System into the Destination Environment part

Migrating Endeca Application and Data from development to a production server

We need to move an Endeca app (including data domain) to a production server from a development server
I installed EID 3.1 in the prod server successfully and this is what I did after the install:
1. Created a new application in Studio (name: JULY2014POC)
2. Manage Pages - Import the .lar file
3. Copy JULY2014POC.worddat file and JULY2014POC_indexes folder to new server, location: domains/endeca_server_domain/EndecaServer/data with all the servers down. Then restarted endeca server, ps server, and studio server.
4. When I try to create an Endeca Server connection it gives me error (Connection definition format is valid but unable to connect.)
5. This is my entry:
"contextPath": "/endeca-server",
"currentFunctions": [],
"dataDomainName": "JULY2014POC",
"name": "JULY2014POC",
"port": 7001,
"restrictedToRoles": ["Administrator"],
"server": "10.2.192.171"
6. When I run any endeca-cmd at OS level I get the following Warning (4 times):
$./endeca-cmd.sh list-dd-profiles
<Oct 29, 2014 4:51:33 PM EDT> <Warning> <oracle.wsm.resources.policyaccess> <WSM-06210> <An instance of the interface oracle.wsm.policymanager.IUsageTracker bean for the local repository at path "" was not available for configuring the oracle.wsm.policymanager.accessor.BeanAccessor repository accessor for context "ResourcePattern [pattern=DOMAIN/weblogic/endeca_server_domain, subjectType=MANAGED_DOMAIN, terms={PLATFORM=weblogic, SUBJECT_TYPE=MANAGED_DOMAIN, DOMAIN=endeca_server_domain}]".>
default
What am I doing wrong? Can someone please help me? thank you

Hi Sergio,
How the data import and export works is what you have to look into. Whenever you export your content it gets exported to a particular directory. If the same directory should be referenced by the code base as well which would be mentioned in the properties file for fetching the configurations.
If they are not aligned they won't pick it up. Also you will have to create pages like endeca-server and make it the default page in your properties file.
Hope u cross this hurdle soon.
Thanks
Karthik V

Error while migrating reports from one instance to another(no torch seen)

Hi,
I am facing this problem when I am trying to migrate reports from UAT to Production. After migration when I try to run the report from Discoverer plus, I cannot see the torch symbol which is general if we have any parameters for that report. So, I again migrate the same .eex file and now I see the torch.
Can any one throw some thoughts why is this happening, why I cannot see the torch symbol in the first time itself?
Thanks,
Srini.

Hi Srini
The list of values is not being associated with the item the first time around. The order in which the items are selected is important so for example if lists of values were imported first without the items upon which they depend they will be ignored. Running the import a second time will cause the LOVs to recognize their associated item and thus the association will be made.
Generally I do two exports. I will export my folders and workbooks first and then export my item classes.
Hope this helps explain what you are seeing.
Best wishes
Michael

How to migrate xml report from test to prod?

Hi,
We are using BIP 10.1.3.2 standalone. I've one simple question for migrating report from test enviornment to production.
Is there any standard method for migration?
Like in Discoverer we can simply export report and import it in prod environment.
Thanks...

Thanks for your reply. That's one describes for EBS version of BIP. I'm looking for standalone version of BIP enterprise.

In Oracle How to migrate .Rdf file from Development to Production Environ..

Hi,
Please explain me step by step how to migrate report(.Rdf) file from development instance to production instance ASAP.
Thanks & Regards,
Raj

Rai,
Please ask your questions in the EBS section, since they are not PeopleSoft related.
Regards,
Hakan

Migration of FR 11.1.2.1 reports from development env to production env

Similar Messages

Maybe you are looking for