Migration of SPM and RAR in 5.3 to GRc10.0

Hello,
I am migrating from 5.3 to AC10.0
we have RAR and SPM in place.
as per migration guide need to export spm data first then RAR correct.
few question .
1)If we have 2 system(backend) where spm data need to be exported.
my situation is we do not have local folder we have netwrok folder to as export location.
can i use same location for both system or does it overwritefile without notification or warning?
2)if i want to configure CUP after migration
can i use solman to trigger,since currently external system receives request and ticket are raised in Solman.
and how we can include training system inplace so that workflow can move ahead to next level after user training is completed.
Thanks,
PKP

In regards to the SPM migration, you have made a good observation, as SPM access is done via the single GRC system now.
When importing the data as per the migration guide, did you try importing the second system's files with the "Append Data" option selected? I think this should work and ensure you have the SPM data for both systems.

Similar Messages

Cannot find FF info in ERM, CUP and RAR (GRC5.3)

I can only find FF info on the ABAP system txn /VIRSA/VFAT.
But on the ERM, CUP and RAR (GRC5.3), I cannot find any info about FF.
Which menu path/tab should I go search?
Thanks!

Hi Crishty,
GRC AC contains four components RAR(CC),CUP(AE),ERM(RE) and SPM(FF).
These seperate component have four seperate URL, so you will not get FF in ERM,CUP & RAR.
Here are the URL to access these grc component,
URL for RAR(CC)-
http//<hostname>:<portnumber>/webdynpro/dispatcher/virsa/ccappcomp/ComplianceCalibrator
URL for CUP(AE)-
http://<hostname>:<portnumber>/AE
URL for ERM(RE)-
http://<hostname>:<portnumber>/RE
URL for SPM(FF)-
http://<hostname>:<port>/webdynpro/dispatcher/sap.com/grc~ffappcomp/Firefighter
Thanks,
Sudip

Question: about to purchase ipad air - how do I migrate contacts,bookmarks,and address books from either an iMac or old macbook?

Question: about to purchase ipad air - how do I migrate contacts,bookmarks,and address books from either an iMac or old macbook?

Set up iCloud on both devices
How to set up iCloud on all your devices
http://www.apple.com/icloud/setup/

ERROR in Opening and RUNNING. EXE and .RAR files of Third Party softwarea

Hello,
I downloaded third party softwares having .EXE and .RAR file extension. But none of these files open up and
I can NOT RUN them and install them on my WINDOWS 7 System.
It is possible , some of the associations of these files might have been missing or may have been damaged earlier by any Virus . At moments my system is Virus-Free and clean. Even downloaded Third Party softwares are Virus-Free and clean
as shown by my Anti-Virus software
Can any body help me to fix up these issues , or to RESTORE .EXE and .RAR file extentions , so that I can RUN and install these Third party softwares on my PC
My EMail ID : [email protected]
Thanks,
Shashikant

Hi,
What do you mean by saying "to RESTORE .EXE and .RAR file extentions " here?
Any applications(or softwares) that with .EXE extention could not be run on your PC or only related to some specific application?
Please take a look at the KB below:
Can't open .EXE files in Windows 7 or Windows Vista
Regarding .rar files, we might need some 3rd party tools to extract them and then take the install option.
Hope this may help
Best egards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Can i migrate mac os and programs from a mini tower to a macbook pro

can i migrate mac os and programs from a mini tower to a macbook pro

How to use Migration Assistant to transfer files from another Mac

How to migrate the RPD and catalog file from siebel analitics to obiee

hi all
How to migrate the RPD and catalog file from siebel analitics to obiee and obiee to obiee 11g
Thanks
Sreedhar

hi sreedhar,
you can migrate from siebel to obiee 10g...check this out http://debaatobiee.wordpress.com/tag/migration-siebel-analytics-obiee/
Next install OBIEE 11g and migrate obiee 10g to 11g using this http://prolynxuk.com/blog/?p=424
hope answers your questions.
Cheers,
KK

Migration of BUPAs and business agreements

Hello,
Its my first thread and my English is not so good but i hope you can understand my problem.
We have to migrate BUPAs from an NON-SAP system to an SAP CRM 7.0.
We use the LSMW for this with IDOC Basic type CRMXIF_PARTNER_SAVE01.
This is okay and works good.
But we also have to create an business agreement for each of this migrate BUPA and this is a little bit tricky.
So i know that there also an IDOC type for this but i want to link this creation to the migration of the BUPAs.
That means i want to migrate one BUPA and after a successful migration of one BUPA i want to create his business agreement and so on.
So how can i do this?
Thx for help

No Idea? Or is my english to bad to understand?
Br,
Silvio

Migration of PO and GR qty from legacy system to ECC 6.0

Hi
All
I have small issue.
PO with 100 pcs.
GR done for 60 pcs
Invoice received 60 pcs
Invoice paid 60 pcs
business says they don't want to upload the history of what's been setteled in the legacy system.
Now the balance qty is only 40 pcs
How can i migrate such PO and keep the GR history in ECC 6.0. without MIGO for full qty of PO
greatly appriciate the input.
i need to write the functional specs for this Migration goods recept for interface.
thanks

thanks for the answer.
They want to see the PO is active with open qty 40 pcs and accept the balance 40 pcs when GR is done..
that is my problem.
any help please.
thanks

I migrated my photos and documents from my PC to my mac mini and now I can't find them where did they go?

I migrated my photos and documents from my PC to my mac mini and now I can't find them. Where did they go?

How did you migrate them?

Can I migrate my files and all my notes over to a new PC?

I have 150 files that I read into Adobe Digital Editions, and I made notes in many of them. I need to preserve my notes. Almost all the files were free downloads (except 2), so I'm not worried about problems associated with Digital Rights Management. If I preserve the directory structure on my new PC (in order to keep the migration as simple as possible), what procedure can I follow to migrate my files and notes over to a new PC? I trust someone at Adobe has thought about this issue. Thank you

I'm not sure this will work, but I think that if you install ADE, and then copy the directory
C:\Users\<youruser>\Documents\My Digital Editions from the old computer to the new, you will see all your annotations etc.
The annotations themselves are in C:\Users\<youruser>\Documents\My Digital Editions\Annotations
Don't lose anything from the old computer until you are sure it is all working on the new.
Also, the old one may well be on an older version of ADE (eg 1.7.2), and the new will naturally install ADE2.0.
I'm not sure if they have changed the format of annotations at all between the two;
one reader recently reported the loss of many books when updating to V2.0. http://forums.adobe.com/thread/1140605?tstart=0
There are lots of bugs in V2.0, so if you are not yet on it you may do best to keep with the old version.
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172
You can also run the old version by copying the ?:\Program Files\Adobe\Adobe Digital Editions directory; no need for an install.
The only thing you seem to miss from a 'proper' install that way is association of .acsm and .epub files with ADE; which you will have to to manually.

Have TorBrowserBundle running Firefox ESR10.0.12 on Mac OS X10.8.2 after browser update how to migrate settings , preferences and add-ons?

Updated TorBrowserBundle and none of my settings, bookmarks,preferences,and add-ons were migrated to the new version. Have you had trouble with this before? I did not replace my older version, so can I migrate these settings and add-ons like is possible with the bookmarks HTML file export?

We are currently running 10.8.5 with Workgroup manager 10.8 and Server App 2.2.5
My question is, would there be any modifications i would need to make to your instructions for them to work on the above os and app version?

Steps for replacing a connector in GRC CUP and RAR

Hi All, We have GRC 5.3 CUP and RAR installed and I would like to replace an existing connector PRD with one called PRD010. Does anyone have the necessary steps to follow to perform this? Your input is appreciated.

Hi Sudip,
Sorry I didn't clarify and thanks for responding. This will be the same backend. I want to change the connector name within the RAR and CUP config, etc. I'm concerned about all the "tags" in the database tables pertaining to this connector name if you know what I mean. It seems that when you make a change like this you end up with data in the database tagged with the old connector names which makes it difficult to clean out the old stuff unless maybe there is a proper sequence of steps to go thru. Can it be just as simple as creating the new connector and then exporting and importing the rules with the new connector name? Maybe I'm making this more difficult than it really is.
Regards,
Gary

Firefox will not recognize when I change the settings for .torrent and .rar files to "do this automatically for files like this from now on", EVEN AFTER I change the setting in Tools Options Applications.

Um, why is this? I think my Question pretty much covers it. Is there a way I can fix the settings so Firefox automatically opens .torrent files and .rar files with the programs I tell it to always use?

I'm sorry to hear that you didn't receive a reply to this problem. As far as I can tell, there '''is''' no reply or solution to this problem so far, as I have exactly the same problem too.
One solution that I did try (and which worked, but not for my exact needs) was to tell Firefox to ''always'' '''save''' the torrents to the download folder. Then, in your personal torrent program, change the settings so that torrents from the download folder are automatically searched and added. In this way, torrents are automatically loaded in your torrent program. However, for me, I need to see the contents of the torrent before I download it all, which wasn't possible with this method. If that isn't important to you, this should be a sufficient solution.
Regards,
Lewis

Forced to migrate to Icloud and Lion?

Why Apple customers accept being forced to migrate to Icloud and Lion (an OS with bad reviews) before the end of June when knowing that Mountain Lion will be available a few weeks later?

For the reviews on the App Store, people who have problems are the one's most likely to post. Millions of people out there didn't give their opinion. Lion has some problems like every other previous OS that came out and it's getting better with each new release. As others pointed out, SL was no different. I've read posts on every system that came out about how bad it was and they wanted to go back to the previous version.
For the loss of the MMe features, I can't do anything about that. I've never used MMe, but the only thing I see that's being lost is iDisk. Most unfortunate for those who use it, but surely it can be replaced. iCloud does provide other features that MMe didn't have.
Other than iDisk, you can still keep your .me address with SL and continue to use it. You don't have to transfer to Lion. The .me is IMAP and will sync between all devices.
For your question, I've never used iDisk personally. If you state exactly what your question and concerns are, someone else may have an answer.

OS/DB Migration with migmon and ftpmethod : Gaps in ftp transfer

Hello,
we are performing an OS/DB Migration with migmon and the ftp method.
WAN Connection between Source and Target System.
We are observing gaps in transfer. Export continues, but there is not disturbance on the line.
We are thinking about transferring the export files manually via ftp instead of using the build-in ftp.
Has anybody the same experience?
KR Joerg

Hi Markus,
there are no errors in, but there are gaps...
like:
INFO: 2010-03-07 07:01:55
New max number of parallel export jobs 4 is used instead of previous 2 for package group 'MEDIUM SIZE FILES'.
INFO: 2010-03-07 08:01:04 com.sap.inst.migmon.LoadTask run
Unloading of '_BEV2_EDMSE' export package is successfully completed.
=> and between 7 + 8 there is nothing transferred to the target system.
Cheers
Jörg

Migration of SPM and RAR in 5.3 to GRc10.0

Similar Messages

Maybe you are looking for