Migration of Transaction Data from SRM 4.0 to SRM 7.0

Hi
We are upgrading from SRM 4.0 to SRM7.0.
In our old release, many Shopping Cart woul be in the status of Approved, Awaiting Approval and Held. When the same data is migrated to the SRM 7.0 Productive system, how should we take care of the same. We would continue to use the Old Workflow (Application controlled) in SRM 7.0. However we have made changes to the Workflow steps in the new system.
Alo while moving to the new SRM 7.0 Production system, how should we manage the Transactonal Data migration overall.
The client has not agreed to close the Open SC, PO or the confirmations.
Any inputs relating to the Transactional data approach would be highly appreciated.
Regards
Raj

Hi Masa
All said and done we have lot of issues with regard to the data migration. The issues are as below:
1. The POWL doesn't reflect the old data at all in the Upgraded system. I was expecting the "Check Status" functionality to be integrated with POWL so that all the existing Shopping Cart and Purchaser Orders could be seen and the follow on actions could be taken.
2. I am not able to do a generic search on "Advanced Search". For example if I try to Search on the old Shopping Carts, until and unless I give the specific Shopping Cart number, the Search doesn't yield any output.
3. Since POWL doesn't reflect the exisitng Shopping Cart we are not able to proceed ahead with them to create the Follow On documents like Confirmation.
4. The Work Flow in the new system remains Application Controlled only. However we have added few extra steps. The existing "Awaiting Approval" Shopping Carts is not picking up the workflow correctly in the new system.
Any ideas about the same?
Regards
Raj

Similar Messages

Problem while data processing TRANSACTION data from DSO to CUBE

Hi Guru's,
we are facing problem while data processing TRANSACTION data from DSO to CUBE. data packets processing very slowly and updating .Please help me regarding this.
Thanks and regards,
Sridhar

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the cube.
Thanks,
JituK

Error while loading Transactional data from NW BW Infoprovider

Hi,
I am trying to load the transactional data using the delivered "Transactional data from NW BW Infoprovider" package and getting error message Error occurs when loading transaction data from other cube .
Below is the transformation file content
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=NO
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 9999999999999
ROUNDAMOUNT=
*MAPPING
ACCOUNT = 0ACCOUNT
BUSINESSTYPE = *NEWCOL(NOBTYPE)
BWSRC = *NEWCOL(R3)
COMPANYCODE = 0COMP_CODE
DATASRC = *NEWCOL(R3)
FUNCTIONALAREA = *IF(0FUNC_AREA = *STR() then *STR(NOFA);0FUNC_AREA)
GAME = *NEWCOL(NOGAME)
INPUTCURRENCY = *IF(0CURRENCY = *STR() then *STR(NOCURR) ; 0CURRENCY)
PROBABILITY = *NEWCOL(NOPROB)
PRODUCT = *NEWCOL(NOPROD)
PROFITCENTER = 0PROFIT_CTR
PROJECT = *NEWCOL(NOPROJECT)
TIME = 0FISCPER
VERSION = *NEWCOL(REV0)
WEEKS = *NEWCOL(NOWEEK)
SIGNEDDATA= 0AMOUNT
*CONVERSION
Below is the Error Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=ZPCA_C01
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\R3_TD_P&L.xls
CLEARDATA= Yes
RUNLOGIC= No
CHECKLCK= Yes
[Messages]
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other cube
Application: ACTUALREPORTING Package status: ERROR
Does anyone had this issue before or is there something that needs to be looked in the BW delivered task ?
ANy Inpout will be appreciated.
Sanjay

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

What are the settings master data and transaction data from r/3 to in APO.

Hi all,
Can u suggest me ,I need to conform in apo what are the setting when transfering master data and transaction data from r/3 to APO.
frm
babu

Hi
The data get transfered from R3 to APO via CIF which is SAP standard.
Please find enclosed herewith the link which will provide you detail information regarding it.
http://help.sap.com/saphelp_scm41/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
Please let us know if it helps you. Please also let us know if you have any more specific question.
Thanks
Amol

CIF of transaction data from ECC to APO

Hi,
I wanted to know where we maintain the configuration for real time transfer of transaction from ECC to APO.
I know for master data we have an option in CFC9 for real time/periodic transfer. Is there any similar config for transaction data too like sales orders etc.

Hi Alok,
To allow online transfer of changes to transaction data from SAP R/3 to SAP APO, you have to activate generally the BTEs in SAP R/3.
This is done in R/3. This is the path:
SPRO --> Integration with Other SAP Components --> Basic Settings for the Data Transfer --> Change Transfer --> Change Transfer for Transaction Data --> Activate Online Transfer Using BTE
You can read about it here:
Change Transfer for Transaction Data - Integration via APO Core Interface (CIF) - SAP Library
Then of course you will need to generate and actiave your IModels.
Kind Regards,
Mariano

Migrating SAP Crystal Data from One BO BI 4 to another and on a different domain

Thank you for reading this and thank you in advance.
This is pretty new to me, I have installed Crystal Server several times before but never had to do much with it and the person that looked after it left a year ago.
So I have been tasked to migrate all the data from our current SAP Crystal BO 4 server to another.
It gets slightly complicated, the company I used to work for was recently acquired and now they want me to move the BO server across to their data-centre on their domain but keeping all the data intact, more the reports not the historical data. I understand that I might have to change a few things but don't want to recreate all the reports and dependencies. At the same time the IT team will now have to look after the reporting.
The new company doesn't currently have any reporting system in their environment and thus want to use ours going forward.
I have read several documents and forums but just can't seem to find a method that will do the trick.
The new BO 4 server is up and running at the same function level/SP as the current production server.
So I have tried Promotion Management, I added pretty much everything needed, then managed the dependencies and exported without any errors, on the new server I get an error(in the background) straight up when importing, although it sits and spins around for ages but nothing come from it.
I looked at using Crystal Reports to save the reports and then import them but after speaking to the person that managed it back in the day she advised me its not just as simple as that, there is a few things that needs to be done to make the report work again.
I read about coping the input data folder and importing the DB directly but figured that would not have a good outcome in the end.
Is there anyone that had done something similar, or know how to get it across with the least amount of trouble. Even if it's a bit of work as long as I can get it across, that will be great.
The last resort will be to learn how the entire system works and at least get the reports across but then fix up all the dependencies, schedules etc.
Just not sure where to start to be honest.
Thank you again.
Marius

Promotion Management is meant to promote small amount of objects. if you need to do complete migration, you can use command line tool of Promotion management.
Check this link how to promote.
How to do Live to Live Migration by LCM_CLI.bat

Problem in loading transactional data from to 0MKT_DSO1(ods) to 0MKTG_C01

Hi,
I am trying to load lead transaction data to the standard Crm lead management cube from ODS.There is a problem while loading transaction data from 0MKT_DSO1(ods) to the infocube 0MKTG_C01 as the field 0STATECSYS2(CRM STATUS) is set to 10 in ods -meaning incorrect transaction. This feild is not there in the infocube.
There is a routine in the cube that deletes data records with (0statecsys2) set to 10.
THIS field is not coming in the transaction.
so, where can i see the master data in crm source system? and why is that feild getting set to 10 ?
thanks in advance!

Thanks for the reply..
I have checked the Fact table which shows
1. packet Dimension
2. Time dimension
3. Unit dimension.
I have kept the 0CALDAY as the time characteristics.
Sample data i have loaded from ODS to Cube.
Sample data in ODS.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
I have loaded this data in Cube with Full Upload.
Data in Cube.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
Again i am loading the same data to cube
Data in cube after loading.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
800001___________12/02/2009____15
The data is duplicated and it is not cumulating.
Am i missing anything on this.
Pls help..
Thanks,
Siva.

Loadind transaction data from SAP ECC 6.0 system failed

Hi!
I have SAP ECC 6.0 IDES system with the following clients:
100 DEV client
200 BI client of SAP 6.0
Now I would like to load the transaction data from InfoSources 0FI_AR_6 and 0FI_AR_4 from SAP ECC client 100.
The extraction process has been frozen in status "yellow" and after a while changed the status to "red" with the following information
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
The users BWREMOTE and ALEREMOTE seems to be ok and have the suitable authorization.
The tcode SM58 does not show any entries.
The tcode BD87 shows that the IDocs was sent (source system) and has been received on target system.
Question:
How can I solve my problem? Please give me some technical information (tcode, report).
Thank you very much!
regards

Walk through your basis set up and check out
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0751ba5-b7a8-2b10-6d97-e91e85c0fafa
pts appreciated.

Loading masterdata and transaction data from same flat file

hi all,
how can i load master data and transaction data from the same flatfile at a time.

I am afraid it is possible.
Go thru this Uploading Master & Transaction Data together from Flat File

Can i load transactional Data from ge DS without having load M Data before

Hello,
I want to load transactional data from a generic data source.
I just want to know whether it would be successful, after the master data of 0material i load in the PSA couldn't be loaded in the infoObject (000000XXXXXXX -> material number error) by the DTP (see Thread BI - BI general - User arnaud).
If i can load the transactional data without having loaded the master data in the info Object, is it possible that it loads also the master data simultaneous.
Thank you very much for helping
AR.

Loading transactions before master data can result in data elements not being populated in the InfoProvider in some cases, hence the "Best Practice" recommendation to load master data first.
For example, if you have update/transformation rules that go read master data to get additional data to enhance the transactional data, or you map master data attributes during the transaction load, the master data attributes could be missing values if you don't load master data first.

Transaction data from one cost center to another cost center

Hi All
Can any one tel me how to move the Transaction data from one cost center to another cost center .
My scenario is basically : Users posted for company code 1003 for Cost center S00570 for the period 01.04.2007 to 30.11.2007 but it has to go to company code 1000 instead of 1003 for the same Cost center .S00570 .
What we have done is that we have changed the cost center from 01.12.2007 on words to the correct company code 1000 and now all postings are going to the right company code ie
to company code 1000.
Now the problem is how to bring back the old historical data posted from 01.04.2007 to 30.11.2007 to wrong company code the 1003 to correct company code 1000 .
Is there a way to bring back the historical data which has posted to wrong company code .
Thanks in Advance .
Any help highly appreciated and points are assigned .
Cheers
Ravindra.

Ravindra
Once you have changed the company code in the master data, then the entries with respect to the different company code cannot be transferred. Please follow the process below and let me know if it works.
1. Revert the cost center master data to the original company code.
2. Repost the line items from this cost center to another cost center. Use tcode KB61. The cost center you will be reposting will be a routing cost center (say XXXXX).
3. Once all the line items have been reposted, change the master data of the cost center to the correct company code.
4. Again repost the costs from the routing cost center(XXXXX) to the correct cost center. You should have all the line items to the correct cost center now.
For more on reposting refer the link below:
http://help.sap.com/SAPHELP_470/Helpdata/EN/27/c98a46db7011d1a5400060086e9494/frameset.htm
Let me know if it worked.
Karthik Coneru

Pass transaction data from an InfoProvider to the BPC within BW

Hi Gurus,
I need to pass transaction data from an InfoProvider to the BPC Real-Time InfoCube, but I need to do from BW, and not from the BPC Excel interface.
The reason is that I want to make the whole process in one step, and at the beginning of the process the end-user has to introduce some parameters in the BW, as we are launching the process chain from a transaction.
Therefor I copied the process chain /CPMB/LOAD_INFOPROVIDER and tried to introduce the different parameters that are normally delivered by the prompt in the excel interface.
Can anybody help? Does anybody know what parameters for each process type have to be introduced, in what form and if all the process types are needed?
Making it with a normal BW transformation is also not an option, as we don't want to change from plan mode and stop people from planning.
It is very important for my end user to do everything in one step, without having to enter the BPC Excel interface.
Thanks in advance.
Cheers,
Àlex

Hi Frank,
I have checked and we have many processes in SM50 available for the job to use. Sometimes there are no other jobs running in the BW System except for the 2 jobs but still the 2nd job waits for the first to finish.
I did another check on transaction code SM58 in BW System. Here it shows all the transactional RFC queues that is being generated by the 2 jobs. I saw that only TRFC queues are able to execute at one time. I am not sure if this is the problem but is it possible to set the number of queues that can be executed at one time to more than 2? If yes, where can I find such a setting?
This is quite urgent as this problem causes all my jobs to end very late.
Thanks.
Shunhui.

Transaction Data from multiple source systems

Hi BW,
I want to load transaction data from two source systems: SQ1CLNT100 QA and SQ1CLNT200 Training client. into one BW system. What is the best practice, do I need to create another data structure or can I mix the data for QA and training in one data structure and separate them with authorisation?
Please someone should help me out with the best practice on this.
Thanx.

Hi Dan,
Do you mean use 0LOGSYS as authorisation relevant InfoObject?
Dont you think that if I copy bid from one source system and use it in another, the two bids will have the same GUID? if that is possible, then I may be faced with the problem of data override. Please advice further.
Regards.

Loading master/transaction data from BI to NW BPC

hi
what is best way of loading master & transaction data from BI to BPC?
I know around 6 options for loading master data and 5 options for loading transactional data from BI to BPC .
What is easiest and recommended method? what is typical method followed in your NW bpc projects?
thanks,.

Hi Raju,
There is a white paper on Loading master data. I've used it previously and both options work quite well. You can use either of them depending on what you are comfortable with. Its available on the HOW To white papers.

Import Transaction Data from BW Cube to BPC Cube

Hi,
Is there any document that explain how i can import/copy transactional data from bw cube to bpc cube like this below pic. http://img841.imageshack.us/img841/6998/prof.jpg
Thanks in advance.

Hi Again,
With these documents I can import transactional data with a single keyfigure but if there are more than one keyfigure, importing and assigning keyfigures to dimensions might get confusing.
For example i have two keyfigures "zbgstsad" and "zbgstsf" in bw cube and I have two account member in "S_ACCT": "S_F", "S_A". I did a conversion file with "zbgstsad(ext)->s_a(int)" and "zbgstsf(ext)->s_f(int)" rows. But i am not sure what i have to put instead of "?".
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
CONVERTAMOUNTWDIM=S_ACCT
*MAPPING
RPTCURRENCY=0CURRENCY
S_ENTITY=ZBGENTITY
S_ACCT= ?
S_TIME=0CALMONTH
S_CATEGORY=*NEWCOL(ACTUAL)
S_OB=0UNIT
S_URUNLER=ZBGURNLR
AMOUNT= ?
*CONVERSION
S_ACCT=[COMPANY]B_ACCT.XLS!CONVERSION
TIME=[COMPANY]B_TIME.XLS!CONVERSION
What do you recommend?
Thanks in advance.
Burak
Edited by: boguner on Aug 9, 2010 2:34 PM
Edited by: boguner on Aug 9, 2010 2:40 PM

Migration of Transaction Data from SRM 4.0 to SRM 7.0

Similar Messages

Maybe you are looking for