Migration Option for Devices that Doesn't Meet Requirements

We have a Family MobileMe Pack and have an iMac with Snow Leopard. When I chose to move 2 accounts that the iMac uses to iCloud, I selected the option to "keep using your email after MobileMe ends" so that these accounts will still work on Mail for the iMac.
When I check the accounts under the Master account, these 2 accounts show (Remove Account) instead of (Migrated to iCloud) as is the case for my kids' accounts.
Now I'm confused as to whether these 2 accounts are really migrated or not. And I'm not sure I can move the Master account to iCloud before these 2 accounts have been migrated. I've read I cannot manage any of the family accounts anymore once the Master account moves to iCloud. But time is running out.
So confused. Any assistance is appreciated. Thanks.

If you have a Family Pack, each sub-account and the master account can be regarded as individual and separate for the purposes of the exercise. In each case all you have to do is go to http://me.com/move and follow the instructions, and it doesn't matter what order you do it in. Because of confusingly worded instructions from Apple some people have got the impression they have to cancel the sub-accounts first: do not do this.
If you migrate the master account first the others will continue to run: obviously what was the master account will not have any control over them nor be able to administer or delete them in the event it wanted to. If you migrate a sub-account while the master account is still running you can't create a new sub-account to fill the gap. Aliases will be maintained but unlike in the MobileMe Family Pack you cannot convert an alias to a full iCloud account.
Apple have provided a facility for MobileMe users whose computers don't meet the requirements to migrate their email only to iCloud. If you choose this option only your email will be migrated to iCloud. It's not entirely clear whether this takes place immediately or waits until July 1, but you can easily check by seeing whether your email is available at http://me.com or athttp://icloud.com - if the latter, the migration has taken place (give it time to take effect before checking).
On July 1 all other data on MobileMe will be deleted, but your email will be accessible at http://icloud.com.
Though Apple have not included this information, you will be able to set mail up manually to access your iCloud email by following the instructions on these pages:
Entering iCloud email settings manually in Snow Leopard or Leopard
Entering iCloud email settings manually in Tiger
Apple have not stated what will happen if you do not follow this process. It seems safe to assume that in that case your emails will be deleted and you will lose the account.

Similar Messages

TS4006 Last known fix for Find my iPad? How is this not an included option for devices that are currently turned off. Absolute no brainer. Thief steals the iPad and turns it offline, or user loses it while it has low battery, lost forever. Brilliant.

Last known fix for Find my iPad? How is this not an included option for devices that are currently turned off. Absolute no brainer. Thief steals the iPad and turns it offline, or user loses it while it has low battery, lost forever. Brilliant.

If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

MY ipod doesnt show up under devices on the left side bar? and now the option for devices has completely disappeared?

I can't find the option for "devices" on the left sidebar in itunes, where my ipod should show up? It has disappeared. How can I get it back?

Hi SMM1971,
If you click on View in the top menu, and then click on Show Sidebar, then you will see the Devices listed (when your device is connected) under the Library and Store.
The reason it disappeared is because that little "iPod" indicator that shows on the top also has the "Eject" button right next to the iPod name, and it is really easy to click on that instead of the button itself....
Cheers,
GB

I got a $50 iTunes gift card for Christmas that doesn't seem to work. Everytime I enter the code, a box pops up that "Code entered is not valid". Please help me?

I got a $50 iTunes gift card for Christmas that doesn't seem to work. Everytime I enter the code, a box pops up that "Code entered is not valid". Please help me?

iTunes Store: Invalid, inactive, or illegible codes

Not offering 6.1.6 security update for devices that can be updated to ios7 is unethical

As a loyal apple customer for 25 years I'm extremely disappointed that Apple is refusing to offer the security update for a major security flaw for those using newer hardware who don't want to otherwise want to update to ios7. Forcing me to update to ios7 to have a secure phone is beyond unethical. Shame on you Apple.

Apple aren't here, so shaming them here is pointless.
For devices that support iOS 7 the fix is in iOS 7.0.6. For devices that only support iOS 7 the fix is in iOS 6.1.6
It's quite simple to understand. Apple always encourages people to use the latest OS their device supports. I doubt that is going to change.
It's your choice to remain on iOS 6 against Apple's advice. Therefore you accept the consequences of your actions.
You want the fix? Then you use the version of iOS for your device that contains it.
Good luck with your class action lawsuit!!!! Haha!

How do I place a still graphic in the same place as a flaash animation for devices that do not suppo

How do I place a graphic in the same place on the site that features a Flash animation for devices that do not support as in IPad?

Why not replace your Flash animation with a web friendly jQuery slideshow or rotating banner?
http://jquery.malsup.com/cycle/
http://wowslider.com/
http://nivo.dev7studios.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Bluetooth option for device search gone

I cannot search for devices to connect anything via bluetooth. The search option has just disapeared. How do i fix this?

This is all that appears in the Bluetooth toolbar menu, and preferances

Changing the material options for multiple selections doesn't seem to work

Hi!
Is it just me or is it not possible to select multiple layers and change their material options like specularity and shininess all at once? Selecting the layers and clicking on cast shadows certainly does work like this, but for some reason when I do the same and change the specularity, it changes only for that layer, regardless of the selection for the other layers.
Are you able to change material options for multiple layers in one click?

Works for me... Not sure what else to say. The only thing to consider would be that you need to expose the same properties on all layers or else AE can't match the property streams, so it may be advisable to hit AA to expose all material options instead of just U or UU to reveal changed/ animated properties.
Mylenium

How can I get Firefox version 5? I use an application for banking that doesn't work with version 6 yet.

I am using an application for banking with Bank of America that doesn't work with Firefox 6 so I need to install Firefox 5 until Bank of America can update their app to work with Firefox 6. Can you tell me how to find the download for Firefox 5?
Thank you

I have an old iPhoto version and it still works with Mavericks, the version before yours, that is puzzling.

Select for update that doesn't return any rows

Are there any odd side-effects that may occur if a select for update that returns no results is never committed? I wouldn't think there are, but I'm not sure if there would be some kind of overhead or unforeseen consequences. This isn't a terribly important question, but it's come up in some coding I've done and I've not been able to find any documentation addressing it.

A select for update only locks rows that meet the predicate specified in the where clause. So, if the query returns no rows, no rows are locked.
session1> SELECT * FROM t;
        ID DESCR
         1 Un
         5 One
         2 THIS IS WA
session1> SELECT * FROM t
2 WHERE id = 11 FOR UPDATE;
no rows selectedA second session can update rows in the table
session2> UPDATE t
2 SET descr = 'One'
3 WHERE id = 1;
1 row updated.John
Edited by: John Spencer on Jan 7, 2009 1:36 PM
I just realized that, although you can do updates on the table after the select fo update that returns no rows, you cannot do DDL operations liike a truncate. Unless the session that does the select for update either ends the transaction (i.e. commit or rollback) or ends the session DDL operations will fail.

TS1398 Network asking for username that doesn't exist

I'm trying to use a coffee house wifi with my new iPad 4 mini. It's asking for a username that doesn't exist. Thoughts?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

Flickr Uploader: 8310 doesn't meet requirements error

I just got a 8310 and when I try to install the Flickr Photo Uploader via web, I get an error that my device doesn't meet the requirements.
This is my first BB and I'm not an expert, but 8310 should meet the requirements, right?
Thanks.
Message Edited by esasse on 10-06-2008 10:05 AM
Erick Sasse

I gave up on the app since RIM does not seem to be updating it and very limited support.
The best option is to email your photos directly into Flickr. You can get your custom email by accessing your account->Email & Notefications-> Upload by email. The subject line would be the Title and the body of the email would be the description.
Here is a direct link:
http://www.flickr.com/account/uploadbyemail/?from=email
So add email to your addressbook and you will be uploading photos in no time. This saves you app memory and uses the native email app.
~I am still at a lost who I really am but by going deep into the jungles I can unlock my secret past.

SELECT-OPTIONS for variables that cannot have a range

Hi all,
There is an option to show only one input-field for a select-options declaration by using the 'no intervals' option. But it is still possible for the user to specify ranges when doing multiple selections (i.e. specify intervals for the variable).
However, if I have a variable that implicitly does not have ranges, (e.g. 'Arjun' TO 'Shankar' makes no sense at all), I want to let the user do multiple selections for it, without allowing him/her to enter ranges for it.
Can I do this in a selection screen in any way (even if it involves not using select-options)? And if yes, how?

Use this:
SELECT-OPTIONS xxxx FOR yyyy NO INTERVALS
NO-EXTENSION.

Looking for devices that can perform straight forward I/Q demodulation process

Hi guys,
I am looking for a high speed NI board that can perform the quadrature demodulation (for a 20 MHz signal), I have looked through the web but so far I can only find 5620, 5660 and 5142.
cos(wt) ----> Device under Test (DUT) -----> Acos(wt + theta)
cos(wt) is the original tranmitting signal (20 MHz). After it is passed through the DUT, amplitude change (A) and phase shift (theta) is then introduced into the output signal (the frequency still remains the same.) The purpose of this setup is to measure the amplitude change and phase shift, relative to the original signal.
Thus I need a simple I/Q demodulation board that can perform this job. Is there any NI board that one can recommend? Or is there a board that can generate the driving signal and do the IQ domodulation at the same time? I think 5620, 5660 and 5142 can only perform I/Q demodulation process...
Thanks for the help!

Duplicate post. See response here.

Loss of Access for devices that is resolved only b...

I have an issue where 1 laptop (out of 3 using the hub wirelessly) and 2 wireless printers lose connection to the hub.
This is restored when the hub is rebooted but then lost again if the printers go into power save mode or when the laptop is turned off and powered up the following day.
All other devices (wired PC, laptops x 2, ipods and pad all continue to operate without issue)
The laptop in question connects to the home hub but shows this as an "unidentified network (Public Network)" and prevents Internet connection.
Nothing that I have tried via the Network and Sharing centre and the self diagnosis and repair options resolves the issue and I cannot fathom how to change the home hub connection back to the recognised Home Network connection that it will revert to automatically if the hub is rebooted.
When the hub is rebooted, the laptop will connect automatically with no issues.
The same laptop does see the BT-Fon and BT-Wifi options on the hub and will connect to both of these using the appropriate password even when blocked from accessing the hub as the Home Network.
The printers are both shown as being offline. Restarting the printers does not resolve the issue, but restarting the home hub does.
I am sure the solution is straight forward and relates to either the BT NetProtect/MCAfee but don't know where to start.
All suggestions are gratefully received

This might help to get your laptop to connect to the network.
Go to Control Panel -> Network and Sharing Center -> Change adapter settings -> Then 'Right Click' on your Wireless network and select Status > Wireless Properties > tick the box “Connect automatically when network is in range”. Click OK then close.
On the Network and sharing Center you should see your BTHomeHub network. Make sure that it is showing as a " home network" and not a public network.
As regards BT Netprotect / McAfee this does appear to cause problems and the general advice on this forum is to uninstall it and install another Antivirus product such as Microsoft Security Essentials or AVG Free 2013 or Avast free. If you do decide to uninstall BT Netprotect follow this link and be sure to run the McAfee clean up tool as well.
http://bt.custhelp.com/app/answers/detail/a_id/13523/~/i-don't-want-bt-netprotect-plus-anymore.-how-...

Migration Option for Devices that Doesn't Meet Requirements

Similar Messages

Maybe you are looking for