Migration questions 7.6 to 7.7

Hi,
we are at the moment in the process of upgrading to a bigger database server.
Currently our Databases are running on maxdb 7.6.05.09 and as this version is not actual any more there will be need to update.
First Question: For non SAP-Installations should we stick to 7.6 or try to migrate to 7.7 (to stay future-proof)?
7.6.06.03:
As far as i know going from 7.6.05.09 to 7.6.06.03 is a simple backup and restore process. This actually seems to work well during our tests.
7.7.06.09:
The "Upgrade if Several Databases Use the Software Installation" process as shown in the Docu: http://maxdb.sap.com/doc/7_7/45/818434546140bfe10000000a1553f7/frameset.htm does not seem to work.
For testing purposes we have installed maxdb 7.6.06.03 and 7.7.06.09 on a centos linux 5.4 x64 server using the following commands:
create operating system user sdb and group sdba.
./SDBINST -b -profile all -indep_data /srv/sdb/data -indep_prog /opt/sdb/programs -depend /opt/sdb/7606 -o sdb -g sdba
./SDBINST -b -profile all -indep_data /srv/sdb/data -indep_prog /opt/sdb/programs -depend /opt/sdb/7706 -o sdb -g sdba
Then we created an empty unicode database using the 7.6 kernel (oltp, default values, default_code set to unicode) users dbm and dbadmin using password test, loading tutorial data).
After that we tried upgrading it using the process described above.
Everything is fine until we reach the final 2 steps:
/opt/sdb/programs/bin/dbmcli on maxdb>db_online
ERR
-24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables failed
-24964,ERR_EXECUTE: error in program execution
768,/opt/sdb/7706/bin/sdbsysload -R /opt/sdb/7706 -d MAXDB -u DBADMIN,*
Installing tables for instances
Removing obsolete objects
ERROR:
----------Command----------------
DROP SCHEMA SYS
-----------Error-----------------
Unexpected error -9406
The following load_systab leads tot he same results.
Any Ideas what is going wrong here?
Might loader be an option to migrate to 7.7?
Probably we will just stick to 7.6 now
Yours Jörn Menkhoff

Yes. Install of both Database Versions is working well. Both database versions and their corresponding databases work well. Only upgrading 7.6 instances to 7.7 does not finish successful.
I cannot find anything wrong in KnlMsg _ but i am no expert in analyzing this file.I have hust repeated the load_systab and here is what was logged in this time.
<MSGL _NO="1659" _PROCESS="13428" _THREAD="0x3492" _TASK="232" _TIME="2009-12-14 09:59:57.000">
<MSG _NO="1" _ID="12633" _COMP="RTEKERN" _TEXT="Connect req. (MAXDB, T232, connection obj. 0x2aaabf911a70, Node:'dhcp171.cc.local', PID: 13601)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:57.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>
<MSGL _NO="1661" _PROCESS="13428" _THREAD="0x3492" _TASK="232" _TIME="2009-12-14 09:59:57.000">
<MSG _NO="1" _ID="12651" _COMP="RTEKERN" _TEXT="Connection released (MAXDB, T232, connection obj. 2aaabf911a70)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:57.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>
<MSGL _NO="1662" _PROCESS="13428" _THREAD="0x3492" _TASK="232" _TIME="2009-12-14 09:59:57.000">
<MSG _NO="1" _ID="12633" _COMP="RTEKERN" _TEXT="Connect req. (MAXDB, T232, connection obj. 0x2ad5a9efcc18, Node:'dhcp171.cc.local', PID: 13601)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:57.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>
<MSGL _NO="1664" _PROCESS="13428" _THREAD="0x3492" _TASK="231" _TIME="2009-12-14 09:59:57.000">
<MSG _NO="1" _ID="12633" _COMP="RTEKERN" _TEXT="Connect req. (MAXDB, T231, connection obj. 0x2aaabf911a70, Node:'dhcp171.cc.local', PID: 13613)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:57.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>
<MSGL _NO="1666" _PROCESS="13428" _THREAD="0x3492" _TASK="231" _TIME="2009-12-14 09:59:57.000">
<MSG _NO="1" _ID="12651" _COMP="RTEKERN" _TEXT="Connection released (MAXDB, T231, connection obj. 2aaabf911a70)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:57.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>
<MSGL _NO="1667" _PROCESS="13428" _THREAD="0x3492" _TASK="231" _TIME="2009-12-14 09:59:57.000">
<MSG _NO="1" _ID="12633" _COMP="RTEKERN" _TEXT="Connect req. (MAXDB, T231, connection obj. 0x2aaabf911a70, Node:'dhcp171.cc.local', PID: 13613)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:57.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>
<MSGL _NO="1669" _PROCESS="13428" _THREAD="0x3492" _TASK="231" _TIME="2009-12-14 09:59:57.000">
<MSG _NO="1" _ID="4" _COMP="Transaction" _TEXT="ESCALATION: T$TASK_ID$, TR$TRANS_ID$: TotalRowLocks: $TOTAL_ROW_LOCKS$($MAX_TOTAL_ROW_LOCK$)">
 <MSG_ARGS
 _FILE="vkb51+noPIC.cpp"
 _LINE="10234"
 _TIME="2009-12-14 09:59:57.000"
 _MESSAGEVERSION="1"
 TASK_ID="231"
 TRANS_ID="30110"
 TOTAL_ROW_LOCKS="773"
 MAX_TOTAL_ROW_LOCK="1250"
 />
</MSG>
</MSGL>
<MSGL _NO="1670" _PROCESS="13428" _THREAD="0x3492" _TASK="231" _TIME="2009-12-14 09:59:57.000">
<MSG _NO="1" _ID="12651" _COMP="RTEKERN" _TEXT="Connection released (MAXDB, T231, connection obj. 2aaabf911a70)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:57.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>
<MSGL _NO="1671" _PROCESS="13428" _THREAD="0x3492" _TASK="231" _TIME="2009-12-14 09:59:58.000">
<MSG _NO="1" _ID="12633" _COMP="RTEKERN" _TEXT="Connect req. (MAXDB, T231, connection obj. 0x2aaabf911a70, Node:'dhcp171.cc.local', PID: 13601)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:58.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>
<MSGL _NO="1673" _PROCESS="13428" _THREAD="0x3492" _TASK="231" _TIME="2009-12-14 09:59:58.000">
<MSG _NO="1" _ID="12651" _COMP="RTEKERN" _TEXT="Connection released (MAXDB, T231, connection obj. 2aaabf911a70)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:58.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>
<MSGL _NO="1674" _PROCESS="13428" _THREAD="0x3492" _TASK="231" _TIME="2009-12-14 09:59:58.000">
<MSG _NO="1" _ID="12633" _COMP="RTEKERN" _TEXT="Connect req. (MAXDB, T231, connection obj. 0x2aaabf911a70, Node:'dhcp171.cc.local', PID: 13601)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:58.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>
<MSGL _NO="1676" _PROCESS="13428" _THREAD="0x3492" _TASK="231" _TIME="2009-12-14 09:59:58.000">
<MSG _NO="1" _ID="12651" _COMP="RTEKERN" _TEXT="Connection released (MAXDB, T231, connection obj. 2aaabf911a70)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:58.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>
<MSGL _NO="1677" _PROCESS="13428" _THREAD="0x3492" _TASK="231" _TIME="2009-12-14 09:59:59.000">
<MSG _NO="1" _ID="12633" _COMP="RTEKERN" _TEXT="Connect req. (MAXDB, T231, connection obj. 0x2aaabf911a70, Node:'dhcp171.cc.local', PID: 13601)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:59.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>
<MSGL _NO="1679" _PROCESS="13428" _THREAD="0x3492" _TASK="231" _TIME="2009-12-14 09:59:59.000">
<MSG _NO="1" _ID="12651" _COMP="RTEKERN" _TEXT="Connection released (MAXDB, T231, connection obj. 2aaabf911a70)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:59.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>
<MSGL _NO="1680" _PROCESS="13428" _THREAD="0x3492" _TASK="232" _TIME="2009-12-14 09:59:59.000">
<MSG _NO="1" _ID="12651" _COMP="RTEKERN" _TEXT="Connection released (MAXDB, T232, connection obj. 2ad5a9efcc18)">
 <MSG_ARGS
 _FILE="Msg_OutputKnlDiag+noPIC.cpp"
 _LINE="709"
 _TIME="2009-12-14 09:59:59.000"
 _LABEL="CONNECT "
 />
</MSG>
</MSGL>

Similar Messages

Analysis Authorization Migration Question

Analysis Authorization Migration Question
This is detail Question
1) I am testing Analysis Authorization Migration in NW2004s SP9 and have applied all OSS notes that are relevant to SP09 and are coming in SP10.
2) We have 2 Info object flagged as Authorization relevant 0COMP_CODE and 0COSTCENTER
3) We have Object level security set-up in BW 3.x system and for a role we have specified values like 0COMP_CODE has value 1000, 1800. :. In the same role we have specified 0COSTCENTER value 130001 to 180001, : and hierarchy node.
4) When we migrate to Analysis Authorizations, using RSEC_MIGRATION, this program creates 2 Authorizations ZCOCODE00 & ZCOSTCTRH00. Both of them have 0COMP_CODE and 0COST_CENTER Objects.
5) ZCOCODE00 authorization gets value 0COMP_CODE values 1000, 1800. : and 0COSTCENTER Value :.
6) On the same line ZCOSTCTRH00 gets value 130001 to 180001, : and 0COMP_CODE :.
1st Question:
1) Why does it create 2 Authorizations?
2) During Checking it does not pass the authorizations, because it seems to me that it fails in Optimization process.
3) I manually merge the authorizations in ONE object then authorization check passes. In other word if I combine ZCOSTCTRH00 & ZCOCODE00 then Query authorization check passes.
Any one is struggling on this.
Please note, I am doing Migration so that it updates existing Profiles (Roles now from SP9).
Any comments will be very help full.
Pankaj Gupta

Hello Pankaj
There are some basic misunderstandings on your side.
Let me try to clarify:
First we should distinguish between migration of authorizations and of what a query does with them.
You had 2 auth objects before migration (in 3.x).
Of course, they must be migrated to 2 new analysis auths.
There is no general possibility to combine authorizations to a single one as the may appear in different roles and users. Moreover this would kill performance and finally, nobody would recognize the origin.
Only in very restricted cases one could think of a combination of auths which come out of migration. But, then people loose overview about what goes on.
Before the corrections in note "Migration IV" the : had not been inserted but now it is for good reasons.
Now, accept for the moment that you receive 2 auths.
Then, you cannnot (must not) combine the 2 resulting authorizations!
Authorization 1
COMP_CODE : 1000, 1300, :
Cost Center : :
Authorizations 2
Comp_Code :
Cost Center : 3100001-31999999; : plus a Hierarchy Node.
This means that e.g. combination
COMP_CODE 1000
COST_CENTER 3100001-31999999
is not allowed!!! Therefore, they must not be combined!
Also, the query and its optimization is comepletely independent of the migration. And here, during query run time the auths cannot be combined. It is no failure!
Moreover, the merging optimization is just a performance optimizaiton and has nothing to do with whether the query result is authorized or not.
If you combine them manually you have authorized different combinations.
Well, now you may wonder why you get 2 auths at all which leads to a "no auth" result in the query execution.
The reason is, that in 3.x where you got a result with your 2 auth objects the modeling was wrong.
If you want to authorize any combination of characteristic values, you should combine these characteritics together in one auth object, not in 2!
(In BI7.0 it works like that but not in 3.x)
But you defined 2 which may be valid even in several other InfoProviders independently and not even at the same time. Moreover, the auth objects may come from different roles and may be assigend to different users which then have completely different auth content. In general it is not possible to combine different auth objects or to find out those special situations which nevertheless allow for such optimizations. If you re-do a migration with more objects and users you could even receive different results which is also not satisfying.
Therefore, instead, the mechanism was introduced to insert a : auth to those characteristics that are auth relevant (and checked now with 7.0) but not in the currently processed auth object.
In you special case it may have made sense to combine them but not in general. And a migration can only try to work as general as possible.
For your application you may combine the 2 auths manually if you want to allow also the crossover combinations
COMP_CODE 1000
COST_CENTER 3100001-31999999
Best regards
Peter John
BI Development

Exchange 2013 Migration Questions

Exchange 2013 SP1 to a new server. I just realized that I have been asking migration questions on the "general" forum. Here's the deal:
We just want to move to a newer server and reuse the "old" server as a DAG member. We have a production exchange 2013 SP1 server and I found that the DB is not on a RAID'ed drive. So, we purchased a server. I installed 2012 R2 and all windows updates.
Then installed exchange 2013 SP1. Then got our AS/AV software installed. When I boot the new server up and login to ECP, it sees all the exchange users, DB and info. So, I followed:
http://technet.microsoft.com/en-us/library/dd876926(v=exchg.150).aspx
to migrate users and current email to the new DB. However, when users logged in their current email was not there. I also tried to use the ECP migration option and this resulted in the same, users old email was not in their inbox. So I had to perform that
same process on the old DB to get users old email back. I then tried to use the migration option in the ECP->same issue. So as of now, we are on the old DB and things are working fine.
According to:
http://technet.microsoft.com/en-us/library/aa997006(v=exchg.65).aspx
When moving from server to server, the DB filename must be the same. The non-production server does not have the same DB filename. Could this be the problem? Could someone point me to documentation on migrating from server to server

So I ran Get-Mailbox -Database “Source Database Name” " -ResultSize Unlimited | New-MoveRequest -TargetDatabase “Target Database Name” and moved all the user mailboxes. Then moved the system mailboxes, public folders and
OAB. Adjusted send connector to reflect new server. Log in as a user, all email is there. Great! Dismount the old DB. Wait a few minutes and user email is still there. Woohoo! Shut down the old exchange server and a few minutes later, all email is gone. Boo!
Boot the old server back up and mount the old DB, all email is back in user inbox. How do I use only the new DB in exchange 2013?
So I just dismounted the old DB and all email stays in users inbox?! So it must be something with the old server that did not get moved over but for the life of me I cant figure out what

Iprint migration question

We had to back out of a migration last week because of issues with edir version on Netware. I've updated that and TSA, but another question just came up. I'm migrating iPrint from a cluster, plus doing transfer ID. If I choose cluster resource on the source server in miggui, I only get the consolidate option. Does that mean I need to first run a consolidation job just for iprint and then go back and run the transfer ID? Or will the consolidation screw up a transfer ID?

$(UService migrations based on cluster resources and Transfer ID are separated in Migration Tools (miggui). You need to execute Cluster based iPrint migration in one project and Transfer ID migration in another project.
Perform all service consolidation migrations and make sure they are all completed/synced and working before attempting Transfer ID.
>>>
From:
zenking<[email protected]>
To:
novell.support.open-enterprise-server.migration
Date:
07/22/2010 02:26 AM
Subject:
iprint migration question
We had to back out of a migration last week because of issues with edir
version on Netware. I've updated that and TSA, but another question just
came up. I'm migrating iPrint from a cluster, plus doing transfer ID.
If I choose cluster resource on the source server in miggui, I only get
the consolidate option. Does that mean I need to first run a
consolidation job just for iprint and then go back and run the transfer
ID? Or will the consolidation screw up a transfer ID?
zenking
zenking's Profile: http://forums.novell.com/member.php?userid=2813
View this thread: http://forums.novell.com/showthread.php?t=416302

How do I find a photo file in the Finder + future migration question

Being a recent Mac convert, I am just getting used to the 'complete control' approach to photo management that iPhoto has. I'm used to knowing where my photos physically reside on my computer - this is useful for doing things like uploading photos to a website for example. How do I actually find a particular photo in the Finder (or even give photo files recognisable names, as opposed to whatever automated naming system iPhoto uses)?
A followup question to this is, what happens if I ever want to migrate my photos out of iPhoto one day to another application or even back to a PC (God forbid - just my paranoia about being forced to use a particular system forever kicking in here!) - is there a way to do this, and keep photo modifications etc? Or once I start using iPhoto, have I made my decision for life??
My apologies if this has been asked before, I couldn't find anything in the forum when searching.

poddster
I hope you've a notebook and pen, but you've asked a lot of questions:
I'm used to knowing where my photos physically reside on my computer
You photos are stored in the iPhoto Library at your Pictures Folder. This is a Unix style Package Folder that very easy to see inside: right click on it and choose show package contents. A finder window opens with the library exposed.
Here's how the library is laid out:
In this folder there are various files, which are the Library itself and some ancillary files. Then you have three folders
Originals are the photos as they were downloaded from your camera or scanner.
(ii) Modified contains edited pics, shots that you have cropped, rotated or changed in any way.
iPhoto always preserves the original file, all operations are carried out on a copy.
(iii) Data holds the thumbnails the the app needs to show you the photos in the iPhoto Window.
And here's a warning: It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss.
this is useful for doing things like uploading photos to a website for example
No it's not. Don't surf the iPhoto Library. The idea with iPhoto is that you do everything via the iPhoto Window or media browsers:
So, to access pics use one (or more) of the following:
There are three ways (at least) to get files from the iPhoto Window.
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser. Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
iPhot doesn't name the files, those names are given by your camera. You can add titles in iPhoto and if you use the File -> Export command there's a facility there to name the resulting file (it'll be a copy - remember what I said about all operation being done on a copy...) with the title.
Do not rename files in iPhoto, That comes under the heading of making changes in the iPhoto Library Folder and alters the path to the files. If you do, iPhoto will lose track of the file. But the truth is there's simply no need to. However, you can rename the files before importing them if you like.
Migrating is really easy. You've seen the layout of the Library above. The originals are all there, in the originals folder, the Modified versions in their folder. If you want to have only the most recent versions of pics, then export them from iPhoto to a folder on the desktop.
By all means post back if you need more.
Regards
TD

Migration questions from Exchange 2007 to Exchange 2013

Dear Forum Members,
I'd ask just two short questions, regarding a migration from Small Business Server 2008 (Exchange 2007) to 2013. We installed the two Exchange 2013 servers, configured a DAG and updated every single URL (OWA, ECP, AnyWhere, Autodiscover etc.) to be a mail.domain.com
record (DNS round robin, since no HW load balancer :( )
Thankfully, the mail flow between the Internet and the other Exchange 2007 users are still working. Now for those users I've already migrated, if I check outlook connections there are several connections for GUID based servers via the DNS Round Robin
name proxy (the AnyWhere address). But I saw that there are still just one connection (type: Exchange Public Folders) to the old 2007 server. Is it okay? I'm a bit afraid to uninstall it because of this.
And the other thing: Based on what I wrote, do you think I've done it good? Or could I miss any important things? You are much experienced than me in these migrations so I hope that I can get some confirmation/advice here :(
ps: Is it good if I set NTLM authentication for Outlook AnyWhere?
Thank you really much for your help,
Best Regards,
Chris

Hi Chris,
Agree with Hinte, the user will still connect to the exchange 2007 server if there is a public folder database in the old server.
If the old public folders are no longer in use, you can delete the public folder database and create a new one in the exchange 2013 server, you can also consider migrating public folders to Exchange 2013 .
The following articles for your reference:
Use serial migration to migrate public folders to Exchange 2013 from previous versions
Set up public folders in a new organization
Step-by-Step Exchange 2007 to 2013 Migration
>>Is it good if I set NTLM authentication for Outlook AnyWhere?
The Outlook Anywhere authentication method you choose will depend on a few factors in your environment,
I recommend you refer to the following thread to understand how to choose:
https://social.technet.microsoft.com/Forums/exchange/en-US/75f8d6c4-70f4-49e5-ac32-a49dd91b5520/outlook-anywhere-ntlm-for-internal-users-and-basic-for-external-users?forum=exchangesvrclients
Exchange 2013: Configuring Outlook anywhere
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Open Directory Migration Question

Setup:
My company has two servers, both running 10.5.6. We are migrating from the server Fubar (xserve) as it has had a lot of problems and we want to do a fresh install on it (I was not the admin who initially set it up).
In order to get a 'fresh' OD going, we are recreating all the accounts on the new server Edoras (powerpc mac pro), making sure to preserve UID of the users.
Problem:
User A cannot change his password on Edoras after Directory Utility has been changed to point at it. He can change his password locally, but it does not propagate to Edoras, nor does a password change on Edoras affect his local machine.
The questions I haven't been able to get answers for are:
* Should the OD search string be different on Fubar and Edoras? Currently our search string is 'dc=fubar,dc=domain,dc=com'.
* Are there other attributes that have to be setup in OD besides UID? I noticed when using the Target tab in Workgroup Manager that there is a GeneratedUID attribute, does this need to match?
Thanks for any information/help.

I did something like this recently. Unfortunately I couldn't get an answer on the Internet and had to re-configure Directory Access on the client machines manually.
I moved our system from a POwerMac G4 with several upgrades (eSATA card, eSATA Coolgear Enclosure, 7200.11 (yeah I know, bad drives to use) Seagate drives, 1.8 GHz PPC 7447 upgrade, 1.5GB of ram) to a new Mac Pro with a Highpoint RAID controller. The old G4 was very unreliable and couldn't hand
I had to go to each machine with ARD, open Directory Access, delete the LDAP entry and re-enter it. This was really annoying and confusing for me as the old server and the new server had:
The same version of OSX (ok, one was a PPC version and I special ordered the Intel version from Apple Tech Support), but they both were running 10.4.11 with the newest security patches.
The same OD Search Strings
The same IP Address for the Server
The same DNS name for the server
and the same user IDs and group settings
and I still had to re-do Directory Access using the client machines. Before re-doing the Directory Access re-binding I would try to login. The "other" icon would appear on the loging window, but when I would loging with the correct username and password the login windows would "shake it's head" and wouldn't let me login.
The biggest pain was that portable directories didn't sync correct anymore, so I had to manually backup, then delete the account, then re-bind, then re-create and restore the portable directory on each laptop manually.
Unfortunately I do not know the unix command to change directory binding to client computers using ARD. If such a command exists it would make things much easier for you. Does anyone know if a command exists?

Hyper-V Server 2012 Migration Questions

Hello All,
This is my first post here, but I have used these forums many times for information. Sorry in advance for the long post.
I have a few questions regarding migration to Hyper-V server 2012 for my production environment. I have done quite a bit of reading, but I have a few direct questions and I would like to get some direct answers.
My current production environment consists of one PowerEdge 2900 with 2 Xeon X5460 Quad Core 3.16GHz CPUs, 24 GB of RAM and a RAID 10 consisting of 8, 500 GB HDDs for a total of 2TB of storage. I am currently running Server 2008 R2 Enterprise w/ GUI as the
Hyper-V host OS. I have 4 virtual machines all also running Server 2008 R2 Enterprise. The 4 virtual machines consist of 1 domain controller, 1 Exchange Server with Exchange 2010 Standard, 1 Server running SharePoint 2010 Enterprise and the remaining server
running IIS with FTP and HTTP.
The network topology is as follows….
Hopefully it is clear from my diagram that the Hyper-V host OS is connected to the same physical network as the domain, but is not a joined to the domain. I set it up this way because I had concerns about connectivity and manageability because the domain
controller is a guest VM. Also, the IIS server is on a completely different physical network independent of the domain.
What I would like to accomplish is the migration of the above environment to Hyper-V Server 2012 as is. I want to keep my existing guest VMs unchanged and running Server 2008 R2 for now as well as keep the existing network topology intact.
I have 3 additional servers in a separate test environment that would be able to serve as temporary storage or whatever is needed for the migration process.
Here are the two main things I would like to accomplish with this migration…
1. Make the transition from Server 2008 R2 to Hyper-V Server 2012 as a host OS.
2. Migrate virtual hard disks from .VHD to the new .VHDX format.
All that being said, I have finally come to my questions regarding this process.
First and foremost, I would obviously need to back up my current setup in case something goes horribly wrong during the migration. My question regarding the initial backup is would it be better to do a bare metal backup of the Hyper-V host or should I do
individual backups (bare-metal?) of the Guest VMs from within their operating systems?
Second, since I plan to use Hyper-V Server 2012, I will have to manage the host OS using the RSAT from a domain joined client running Windows 7 Professional. How much of a pain is it going to be to setup RSAT and manage the non-domain joined host from a
domain joined client? Is there a better way without using SCVMM or using Server 2012 w/ a GUI as the host OS?
Third, are there any concerns I should have, precautions I should take or procedures I need to do before, during or after the migration regarding the existing VMs and the new virtualized hardware environment on the same physical host?
Forth, should I use the trial version of SCVMM 2012 SP1 (or another previous version) to perform the migration? What should I be aware of using SCVMM for the migration and then discontinuing its use after the migration is complete and moving to management
using the RSAT?
Fifth, if I don’t use SCVMM for the migration, what is the best procedure for moving the VMs? Should I just copy the VHDs to a temporary storage location, install Hyper-V server 2012, copy the VHDs back, create new VMs and attach the VHDs or should I use
the export/import process?
Number six, when is the best time to migrate the VHDs to VHDX format and what would be the best method?
And finally, do I need to worry about USN rollback with a single domain controller? From my reading, this seems to be a point of disagreement. Some people say it could happen while others say it won’t. Is there any point during the migration process where
it could occur either during the copying of VHDs or from the switch to VHDX?
Again, sorry for the long post and thanks for staying with me this far. Any information would be much appreciated

1) As Jens said below with Windows Server 2012 you can simple copy the configuration files and VHDs from a 2008 R2 server to a 2012 server and import them - they one caveat to this is that any vlan configuration is lost and you have to simply re-create it.
Optionally you can also export the virtual machines from Windows Server 2008 R2 and then import them on Windows Server 2012.
2) Remote management in a workgroup does have some caveat's associated with it - take a look at
http://blogs.technet.com/b/jhoward/archive/2009/08/07/hvremote-refresh.aspx. Generally I would recommend joining the Hyper-V management operating system to the domain - not just because of these issues but for a number of other features to work properly
(see below)
3) I always recommend validating the hardware and environment after the installation before migrating critical workloads to it - testing networking, backup etc... to make sure they function as expected. Also ensure that you upgrade the integration
components in the VM's after the migration.
4) That is an option - though you might find you like SCVMM
5) Recreating VM's using existing VHD's has some issues for example the BIOS GUID changes, all of the NIC's are re-plug and played etc... When possible copying the configuration or using export is much better.
6) The sooner the better - VHDx has a number of significant advantages, you can do the migration using the Hyper-V manager UI (edit disk) or via powershell with Convert-VHD. Do keep in mind that during the conversation you need 2x the space (for the
original and the new VHDx).
7) In the past you could get into trouble if you for example snapshotted an AD virtual machine and than reverted it - taking one offline and then brining it back online was never a problem. In Windows Server 2012 we addressed this with a feature called
generation ID's.
Domain considerations... A few things to keep in mind regarding the choice to not domain join the Hyper-V server.
- You can't live migrate virtual machines
- You can't utilize Hyper-V over SMB
- Management is more difficult and less secure
-Taylor Brown -Program Manager, Hyper-V -http://blogs.msdn.com/taylorb

Forms system potential migration questions.

We have a forms and reports based system built in 10g.
We are considering migrating to 11g forms and reports but long term moving to ADF or APEX.
We are generally a data entry system run on intranet so my prefernence has always been APEX but management are trying to follow the Oracle roadmap which is pushing ADF.
We are a small outfit so the solution we choose will probably be the one which offers the quickest development times.
I have signed up for apex.oracle.com to have a play but seems to be taking forever to get approval!
A few questions re APEX (apologies if these are really simple)
1) How is user access controlled. Currently all our users login via one SYSDBA user. Our current system has a logon box which then allows access to the screens they can amend. I assume APEX uses the DB user access rights?
2) How easy is it to deploy fixes etc? We have upwards of 200 customer sites. We currently distribute fmx an RDF files on a monthly basis.
3) Can you use key strokes? Many customers like the F Keys to be used as quick keys? i.e. in forms F10 can be save, F3 can be clear etc
4) Can we use our existing database? Although this is many years old and all the correct constraints may not be in place (ie. a few FK/indexes may be missing - but we could try and tidy up pre migration) would it be possible to use this. We are consdiering rewriting the database but most customers will want to bring through their old data and have custom reports built on these so would struggle to rewrite)
5) How is inheritance handled? In our forms environment all our items are inherited from one point so if we change that one point it follows through the system
6) I have seen online demo were by people are creating mini databases from spreadsheets. Can it be setup so the users can create things like this without affecting other areas of the system?
7) Any pros/Cons when comparing to ADF
8) Any people any fedback from migrating from Forms
Any feedback at all is greatfully recieved.
Im looking forward to the online demo.

Sure Oracle pushes ADF, because it has cost them $$$$$$ and they want to get that back. Apex is part of the database, and as such you already have a license for it. No need for a Weblogic or OAS license.
seems to be taking forever to get approval!Went pretty fast for me a few years ago. 1-2 days if I remember correctly.
1) There are pre-built authentication methods, but you can also create your own method (which most people do).
I assume APEX uses the DB user access rights?As in most web applications, there is only one user that actually accesses the database. And I would never ever make that a SYSDBA user!
Other users may log in via username/password that can be stored in Apex tables or your own tables. They can also be actual database users. However, since they do not connect to the database, their roles are irrelevant. You may use these roles to check authorization in your application, though.
2) Apex exports applications in a sql file, so you can deploy applications via sqlplus (or via the Apex administrator page).
3) The keys are actually browser keys, so you are very limited. You can use some Javascript, but forget about something like F7-F8 combination. It doesn't matter what technology you use, web is different from client/server (or the Forms Java applet). You have to rethink GUI concepts coming from Forms and going to browser applications.
4) Yes. But like Forms, good database design makes thinks easier (like using wizards).
5) There are all kinds of places where you can set defaults, templates etc.
6) Yes.
7) Google for discussions on ADF vs Apex.
8) We use it side by side. No plans to recreate Forms as an Apex application.
Depending on the size of your Forms app, it may take a long time to re-create it in Apex. There are some Forms migration tools in Apex, but I wouldn't use those. They cannot migrate the Forms code anyway, since a browser doesn't understand pl/sql code. As said, you really have to rethink your GUI when moving to a web app.

Migration Question for New Leopard Mac Mini

Oh my... I have a new Leopard Mac Mini still in the box!
I want to connect it up and migrate my iTunes and iPhoto libraries, etc. to it from my old Mac Mini but here's the thing: my old Mac Mini is a G4, powerpc mac has been through a sort of mini **** lately and at this time will need it's hard disk repaired before I will be able to get it back up to 10.4.11 and Safari 3.0.4. that it had had only last week, before all manner of disasters happened after the last security update. Genius bar made it relatively functional by re-installing the OS but they used 10.4.7 and Safari 2.0.4. to do it! So here is my question: Do I need to get my PPC Mac back up to snuff completely before I can migrate stuff from it to the new Leopard Mac Mini or can I do the migration and get everything nice and lovely on the new machine even though there are still problems on the old Mac Mini?
Here is the problem that the PPC G4 Mac Mini has at this time:
Verifying volume "Macintosh HD"
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid index key
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
Would this pose a problem in the migration?
Any help and advice would be greatly appreciated! Thanks so much! -Charlotte

The best thing I can say about your post is that at least you realize that Installing Leopard on a broken Tiger and a G4 processor files is exactly how hundreds of the problems are being caused. Too many people have decided that "Apple Just Works" and figure that installing the newest most complex MacOS ever will just work. These people are getting "worked".
Good Luck cleaning up your machine to tip-top shape to 10.4.11, with every update for every program you intend to transfer. Your drive must be squeeky clean, or you will have problems that nobody can explain. I'd recommend removing any applications you don't have to have or that you can reinstall easily with a program like App Zapper and get rid of the G4 system files as much as possible.

Migration questions

Question no.1
Using GroupWise server migration utility, the default for the post
office destination is /var/opt/novell/groupwise/mail. I have created
home_ncp volume mounted at /home in Linux server and also mount a volume
named GroupWise at /home which is home_ncp volume. Therefore, I want to
change the default path to groupwise volume I mounted. What is the
correct path for this, /home/groupwise or /home_ncp/groupwise? The
reason I ask this question is because I can only groupwise at /home_ncp
from my xp workstation. Please advise!
Question no.2
Which one shall I migrate first, post office or domain?
Thank you very much!

April,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Server migration questions

Hi all: I will soon be migrating an OES2sp3 server to OES11sp1. I have read through the migration docs but still I have a few questions I need answered/clarified.
1. When installing OES11 on the target server, I have to give it a name and bring it into the tree. When the migration takes place, will all instances of the target server, both in OES and SLES, get renamed to that of the source server? Most notably the internal server CA_default certificate, which gets named during OES installation.
2. Prior to migration and docs say to create the driver store and print manager on the target server. Do I just give them a temp name as the transfer ID task will rename everything when it runs?
3. The server being migrated is our CA server. My plan was to move the CA to a different server temporarily to another OES server, and once the migration is finished, move it back. Does that seem reasonable?
Thanks, Chris.

I hate when I do that.
>>> smflood<[email protected]> 12/12/2013 6:06 PM >>>
cmosentine;2297649 Wrote:
> Hi all: I will soon be migrating an OES2sp3 server to OES11sp1. I have
> read through the migration docs but still I have a few questions I need
> answered/clarified.
Given that you are asking about migrating from OES2 SP3 to OES11 SP1
then I suggest reposting in the OES11 (Linux) Migration forum @
https://forums.novell.com/novell-pro...oes-migration/
as this is a NetWare-related forum.
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.
smflood's Profile: https://forums.novell.com/member.php?userid=617
View this thread: https://forums.novell.com/showthread.php?t=473395

Another migration question

I am moving from a G5 running Leopard to a new Mac Pro (Early 2008). I plan to migrate my user data using MA, but reinstall all applications manually and drag the library>application support files over manually.
My question is this: should I install the apps first, then drag the application support files over... or the other way around?

Thanks for your reply, Neil. I'm not sure I understand your answer, though. I am using the original installers. But I want to carry over all of my preferences, settings, etc. from my previous application installs on my G5. As far as I know, those are stored in the "user>library>application support" folder and the "user>library>preferences" folder.
If I install the apps first, then drag the relevant files over from my G5, I'm concerned that they'll be replacing files installed by the original installers particular to the Intel-based Mac Pro. OTOH, if I drag the files over from my G5 first, and then run the installers, won't they overwrite my preferences & settings?

Software migration questions- from Crystal 9 or 11 to CR4E

Hello, this is my first post here.
I'm a system's analyst and I have been working with crystal reports since 2003. My company's product has a report module and basically its architecture is based on jsp, java, asp and crystal reports ( we have over 200 reports ).
My first big task related to that architeture was making it able to support crystal XI as well, I was able to do it in about 1 week.
Yesterday I started designing a project in order to eliminate dictionary labels in .mdb files, and putting them on .properties files or direct in database. Looking for some ideas on how to do it, I was able to find out cr4e version.
I already downloaded it, installed and imported some reports into it, and it worked great.
Now, taking a closer look at this new version of crystal reports I was wondering if I could put it into my project. The main idea is to elimante the asp pages, odbc connections and those label dictionaries I have in mdb format.
My first question is: which libraries should I carry to my existing application?
I mean, I already have a application done and I don't want to start a new one, I just want to add to my application the libraries that I really need to make it works.
The second question: Am I able to do such things as I did on ASP pages using JSP with those libraries? For example, I used to replace labels within a report just by making connections on asp, running through the report sessions and replacing its labels depending on user's language.
Hopefully, If I could do it I'b be able to make the application's performance better.
Well, if someone is able to answer those questions I'd able to continue my project and then migrate to this new version and see how it goes.
Thank you very much.
Paulo.

Since you were using ASP pages to modify Crystal Report 9, I'm assuming you were using the Report Designer Component (RDC) SDK. The RDC has report creation/modification that allows one to alter text objects within the report before refreshing it.
Crystal Reports for Eclipse currently doesn't have report creation/modification capabilities - they're there (it uses a version of the Report Application Server SDK), but not currently tested for public developer use.
Sincerely,
Ted Ueda

Backup and Data Migration Questions????

Sorry for the multiple post, posted to fast and placed in wrong post....
But anyway... I am considering getting the Droid X (Android 2.1) and I will be changing over from a Imagio (WM 6.5) and since I am new to the whole Android OS, I was wondering what is the best way to transfer all my data from the Imagio to the Droid X once I recieve it? I have looked at a application (Sprite Migration) that seems to make the migration process rather simple that can be found at http://www.spritesoftware.com/products/migrate/how -does-it-work- but I was wondering if anyone has used this application and how well did it work?
Second I was also looking at the Sprite Backup application also for my system backups of device, I used the Windows Mobile version before ojn my Imagio and it worked well but I decided to stay with SPB Backup because I was already use to the program since I have used it for a number of years....
Is Sprite Migration and Sprite Backup a quality product to use on a Android device because I want to backup the stock image into a file before I start modifing my device and learning the ins and outs of the unit.
Any feedback would be appreciated

Hi Wildman,
Yes you are correct, Sprite Backup offers a much more complete backup.
We backup everything that can be done without root access.
We are also now on many handsets in ROM, with even more access. We hope to see more manufacturers, (4 so far, but not Motorola yet) bundle us on their devices (approx 1.2 million devices with us in on Android).
If you already have moved to your new Droid then it's probably too late. However, Migration is a great solution for moving your data painlessly across to the android device.
I appreciate you used SPB, a fine product on Windows Mobile. I am sure you are aware of our 18 million Windows mobile sales of Sprite Backup (the other camp , the majority are actually bundled on devices there also)
We have a strong support staff, so if you have any questions please fire them off to us.
http://spritesoftware.crmdesk.com/
To give you an idea of what Android Backup covers, please read this
http://www.spritesoftware.com/getmedia/0e592ab4-61bb-4f6d-a218-b6df82669a18/Android-Backup-v2.0-User-Guide.aspx
Migration is soon coming out as an OTA service, for a carrier or two
As you have pointed out, contacts sync (like for winmo active sync) is great, but there is a lot more on a device.
Many thanks
Julian@Sprite

Forms 6i to 10g Migration Questions

Hi,
My company is thinking about migrating Forms 6i to 10g. I wonder if you can share some of your experience with us (and with thousands of others who will also face the same daunting task)
1. How do you like/dislike Forms 10g after the migration?
2. What are the pitfalls of Forms 10g? What are the strengths?
3. Other than Oracle Migration tools, is there any other tools that can help us?
4. How long is the migration process typically taken?
5. What problems have been encountered in the upgrade process?
Thank you very much!
Sincerely,
John Sun

May I answer your question with some questions of my own? :)
1. Are you migrating from Forms6i client-server or web?
2. If Web, to a non-Windows middle tier (hopefully)?
3. Do you plan to incorporate OID/SSO and/or Portal in the new environment?
I just reached the end of a 6-month long prototyping project to migrate our Forms/Reports 6i application (80% client-server, 20% web) to 10g, using SSO and Portal for report destination. We migrated about a dozen forms of varying complexity and rewrote our main application/menu form. We originally thought the prototype would take 3-4 months. The purpose was to learn what we needed to develop the best migration approach and have an idea of what it would cost. The application has about 650 forms/reports modules. Costs and the learning curve prohibited a move to J2EE/ADF; oh I wished... Management is hoping we can complete the full migration in about a year, but I think... well, this is a public forum and I am using my real name. ;)
We've only been using 10g release 2 since the end of January. Stay away from release 1 at all costs. Even release 2 is not what I would call entirely stable. I just opened a SR on MetaLink a few days ago for a problem I was able to recreate where the use of a button on a form-level toolbar that directly or indirectly call_forms a new form, and then navigation occurs back to the original form (say, when trying to minimize or rearrange widows) causes the session to crash with the infamous ORA-92101. We rely heavily on a hierarchical tree for our application menu, and keyboard navigation on the tree is somewhat broken (tree triggers not firing).
However, many long-standing 6i bugs have been fixed, and I really, REALLY do appreciate being at PL/SQL version 10 in Forms.
But we have some real challenges too, some self-inflicted. Some 400 of our application forms were converted from SQL*Forms 3.0 via Kumaran a while back. This is admittedly our greatest challenge. The V3 forms, being they were character-based with no mouse support, had lots of code in Key-navigation triggers that was never meant to be in navigation triggers (validation, etc) and would get bypassed if the user skipped the field using a mouse. Kumaran solved this problem using mouse triggers which are no longer supported on the web. We also are attempting to introduce some enhancements during the migration like become Section 508 compliant.
I did not opt to use the migration tool; it doesn't really do that much for you anyway.
One headache for us was Reports. We eliminated many temporary tables (permanent tables created temporarily) in user schemas for the use of global temporary tables. Granted, this feature showed up in Oracle9i. But in 10g, we found inadvertently that database sessions for reports are initiated by a java process and reused for performance, meaning different reports sometimes (and unpredictably) are sharing database sessions instead of getting their own. It would've been nice to know this beforehand because it was a challenge to find out the hard way.
My biggest complaint is that Forms still lags behind in features that are part of the application server. For example, I would've loved to implement Enterprise Users and rid our database of the many thousands of user accounts. But Forms doesn't support it. And Oracle really should have provided a migration tool to create the OID resource that links the OID user account via SSO to the database account. Especially since Forms only works with database accounts. All we got was a 9i-based White Paper on the APIs to write our own. This is Oracle data, not application data for heavens sake!
I've opened easily over a hundred SRs during this time, and am quite sure that my name is mud by now and that I have lost any chance of ever getting hired by Oracle. ;)
If your DBAs are database-centric and not used to administering a middle tier-- or administer an old middle-tier like 9iAS 1.0.2.2.2, get them into instructor-led training on 10g administration BEFORE they have to install the 10g infrastructure and middle tiers. The architecture is radically changed and infinitely more complex. As far as the workload the developers will face; Forms is still pretty much Forms, but the state of your existing code will play into it.
I was so tired of spending years on older versions of Oracle software. And I am proud to announce that I am now intimately familiar with what is known as The Bleeding Edge.

Migration questions 7.6 to 7.7

Similar Messages

Maybe you are looking for