Migration SAP ERP on HANA
I have SAP ERP 6.0 EHP 6 and want migrate on HANA.
In SWPM choose
SAP Buisness Suite powered by SAP HANA
EHP6 for SAP ERP 6.0 On HANA
SAP HANA Database
Preparation
Prerequisites Check
SWPM requires UC Kernel NW738
Where i can download this kernel?
I found only SAPEXE_53-20009834.SAR and SAPEXEDB_53-20009834.SAR without LABEL.ASC
Hi Leonid,
The kernel is available at the below path.
My Company's Application Components--> Complimentary Software--> SAP KERNEL 64-BIT UNICODE--> SAP KERNEL 7.38 64-BIT UNICODE
Kindly ensure that you have the latest version of th SWPM and please got through the SNOTE
1878193 - Central Note - Software Update Manager 1.0 SP10
Regards
Arshad
Similar Messages
-
Having problem with the SAP ERP on HANA trial
Well, I left my SAP ERP Foundation Extension powered by SAP HANA - Fully Activated Appliance Landscape Trial suspended for about a week. When I re-activated the instance, I could connect to the SAP clients but not log in.
I get the "Logon not possible (error in license check)" message.
I also logged into my AWS console to look at the system log.
The log ends with a number of entries like:
This is R3trans version 6.24 (relesae 741 - 10.10.13 - 20:13:08 ).
unicode enabled version
2EETW169 no connect possible: "DBMS = HDB --- SERVER = '' PORT = ''"
R3trans finished (0012).
Is there anyway to fix this? or do I just terminate and start over, again. (yes, this is the forth or fifth time I've had to rebuild).
Thanks,
BrianHi Brian,
there is a bug in the SAP Kernel which unfortunately invalidates the license after each reboot. We are already working on releasing a new version of the SAP ERP Foundation Extension Trial end of this week/early next week which will fix the error.
Alternatively you might fetch the new kernel from the Service Marketplace (if you have access). You would need SAP Kernel 7.41 PL47 for Linux x86_64. After launching the instance in CAL before it turns "green" in the CAL UI you would need to exchange the binaries after logon via ssh.
Quite complex to do, so the suggestion is to wait until end of this week/early next week until we are able to release a new version of the appliance incl. the fix.
Best Regards,
Hannes -
Cant activate SAP ERP on HANA - Instance Status "Undefined"
Dear all,
following: http://sapappcenter.com/medias/SAP-ERP-powered-by-SAP-HANA-Getting-Started-Guide?context=bWFzdGVyfHJvb3R8MTE0MzE4MnxhcHB…
I tryed to run an ERP on HANA demo instance. So I have created an AWS account, activated EC2 and tryed to activate an appropriate 30 days image afterwards. All I can see is actually:
If I tryed to activate the instance through clicking the button "Activate" I was told to wait something about 40min, since the proccess need some time. I have waited for longer and also tryed more then one time, but sadly without any success: the instance is still in status "Undefined". Am I doing something wrong? Thanks,
cheersHi Stanimir,
SAP CAL should create a default VPC if you left the default network option. Could you check the network name in the instance details in SAP CAL?
I have checked this and found a default VPC, looks ok for me:
subnets:
route tables:
Not sure what you meant by network name, does this help?
Regarding rules, you just need to go back to the screen in the AWS console that you attached and click on view rules. Port 22 should be open for inbound calls.from anywhere, i.e. from 0.0.0.0/0.
Not sure I got you right, I took a look to Network ACL's and found the in resp outbound rules as following (here and further related to vpc-838446ea (10.0.0.0/16) | SAP CAL Default Network) :
I also found 3 appropriate security groups with in resp outbound rules:
None of these settings were done by me, they came obviously out of the box. Should I adapt something? Im a bit irritated since I have 3 security groups, no idea why. Thank you very much, I appreciate your help.
cheers -
Hello All,
I am Bsc(Hons) Computing graduate. I have two years of experience in SAP ABAP. I wanted to take admission for Masters in SAP ERP systems. I wanted to get more skills by learning more modules like CRM, BI, HANA etc. Can anybody suggest which is the best university that provides this course ? I am interested in universities from USA, Canada, Germany specially because this countries offer work visa after studies and I wanted to gain international experience. So please suggest any university and If anybody have completed or pursuing this course currently please provide more information about this course.
Thank youPlease contact
www.hs-furtwangen.de/bcm or
[email protected]
and look through Business Consulting Master with spezialsations in SAP (ERP, CRM, HANA, ABAP, BI, APO)
Prof. Dr. Thomas Marx
Programme Director MSc in Business Consulting
Furtwangen University of Applied Sciences
[email protected]
www.hs-furtwangen.de/bcm -
What would you prefer - SAP ERP or S/4 HANA?
Hello,
After the impressive keynote speech of the recent TechEd, it made wonder about how the customers of SAP would leverage the new S/4 HANA, if at all and it instigated a thought process.
Possibilities:
A. Keep our good old SAP ERP - Through the years, a company has been employing SAP ERP, with all its configurations done, customizing in place, trained talent pool, interfaces defined and up and running solutions. Migrating to a whole new solution would mean a lot of overhead of replacing all of that as well as increase TCO.
B. Switch to the amazing S/4 HANA - Simply means leveraging all the benefits S/4 HANA has to offer with lightening speed at comparatively low investment considering the returns. With the ease of development as well as configuration offered, the required workforce might reduce considerably, thus, lowering support costs. This would be like one time investment with long term returns.
Note: All of the above are my views to the best of my knowledge and everyone is entitled to their opinion, agreements or disagreement to the above. Let us just discuss about what everyone thinks about this, pros and cons about what SAP has to offer and propagate optimum utilization of innovation for years to come.
So what do you guys think?Hi,
Thanks for sharing,that's good suggestion you give thanks for all of that kind suggestion!!!
Thanks and regards -
SAP BW on HANA DB Migration - Technical & Functional Assessment Check List Required
Hello Experts,
Typically, Before we start SAP BW on HANA DB migration, we would certainly need Technical & Functional Assessment Check List. As per knowledge, to execute BW on HANA DB migration, we would need HANA Admin and Developer, BASIS and BW consultants.
Can some one share me what exactly these people does in Technical & Functional Assessment ?.
What could be the duration ?.
Does this people require to login into the system's physically and perform any activities ?
Please share me details.
Thanks,
HAHi,
with the perferred (and recommeded) database migration option (DMO) as part of the SUM the need of these Functional Assessment Check List might obsolete, as a lot of manual tasks are integrated into the automated process, which were only available as lists in the past.
For an Overview, see - Migration BW on HANA - Update 2014 | SCN
For a detailed step by step, see - SAP First Guidance - Migration BW on HANA using the DMO option in SUM
Best Regards Roland -
CAL - Connect to an instance of SAP ERP Foundation Extension powered by SAP HANA
Hello,
I created and activated an instance in CAL today, the ERP on HANA trial.
Once this instance is activated ("green button"), the "connect" option appears but I'm not able to connect to it using http or SAP Gui.
I have no firewall, the error is:
This webpage is not available
Could you help me?
Thank you!hi Pierre,
There could be multiple reasons for not being able to connect to the instance:
1. After click create instance, you need to wait for 45 minutes. Also the green botton comes,in the backend it is still working to complete the creation.
2. Once you have IP address, please try to connect to SAP GUI by manually add the server, instance number, etc into SAP GUI. See if it works. In addition, try to connect to BI launchpad via http:<IP address>:8080/BOE/BI.
3. Some user reported connection problem, we found out that certain AWS account may have problem with VPC layout used for this solution. check out the support AWS account:
• Click on EC2 Dashboard in left side navigation of the AWS Management Console • In upper right section of screen under Account Attributes section the Supported Platforms are listed http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-supported-platforms.html
regards, Xiaohua -
SAP HANA: Differences in functionality concering side by side and ERP on HANA scenario
Dear all,
There are two ways to use HANA - on the one hand, I could use it as a main database (ERP on HANA) or, on the other hand, I use it as a secondary database next to a non-HANA database (side by side or "sidecar" solution) for selected matters.
Where are the limitations if I use the side by side solution only? Are there functionalities which I can not use in comparison to the ERP on HANA solution? Or offer both solutions the same functionality but only the way to use HANA is different?
Do you have any clue or any links concerning documentation - till now I wasn't able to find some..
Sincerely Yours
ZappHi Zapp,
You can check the below thread for limitations in SideCar Scenario:
What are the limitations/challenges in HANA sidecar
In addition to these, you will not be able to use ABAP Proxies, ABAP managed database procedures and many other new functionalities that are being added to ECC on HANA.
If you use HANA as a sidecar, you would use it to accelerate only few transactions while with ECC on HANA, many standard transactions have been optimized to use the power of hana
Additionally, you can register for free Suite on HANA course at openSAP and learn more about it:
Course: SAP Business Suite powered by SAP HANA
Regards,
Vivek -
We have installed a SAP ERP IDES system but we'd like to try out Simple Finance. We could do a fresh install of ERP but we like the demo data included in IDES system. Is there a simple SAP supported way of migrating our system (or data to be precise)?
No. In down sampling with iTunes a new file is created and added to the library. Most of the old data are preserved but some such as date added are created when the track is added.
Using a third party tool may achieve what you want because the new file could overwrite the old one. I recall using a third party tool to edit a mp3 and overwrite the old file. iTunes was tricked into thinking the replacement was still the original file, but of course the edits were in place. I can't make a specific application recommendation for bulk conversion where it will overwrite the old file.
I will regard this as a general iTunes question but in general if you are using beta software versions you should not be posting in the main iTunes forum. -
Client(mandt) Handling in SAP Business Suite (ERP) on HANA
Hi Experts,
What are the possible ways to do client handling in native application developments for ERP on HANA?
Is there a best practice for automatic client handling?
Regards
ManasHi Manas
for information models you simply set the client property of the models.
For SQL processes you can leverage the session_context ('CLIENT') parameter as a filter.
The modelling/development guide actually covers that.
- Lars -
IDES Installation - EHP 7 for SAP ERP 6.0, fails at abap import win 2012 r2 ORA
Dear gurus:
I am having an issue on import abap phase to complete the SAP IDES ERP EHP 7 for ABAP installation.
i am already search on the net, but found nothing about this>
my host file on both path:
C:\Windows\System32\drivers\etc
C:\Windows\SysWOW64\drivers\etc
#127.0.0.1
rzablah01
127.0.0.1
rzablah01.rzablah
#127.0.0.1
rzablah01
localhost
i don't have domain controller
machine:
windows 2012 server datacenter r2 english x64
8gb ram
700gb hdd
the SWPM is
SWPM10SP06_5-20009707.sar
the pre check was OK
I put the policy files on java in the following paths
C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\sapjvm\sapjvm_6\jre\lib\security
C:\usr\sap\ERP\SYS\exe\jvm\NTAMD64\sapjvm_6.1.059\sapjvm_6\jre\lib\security
the version is jce_policy-6.zip
I already patch kernel, and try another things, but nothing solve it.
my log:
C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\sapinst_dev.log
i found this on the file:
WARNING 2014-09-24 21:10:39.657 [synxcpath.cpp:1010]
CSyPath::getOSNodeType(bool) lib=syslib module=syslib
Unable to get information about path \\LABEL.ASC\ using GetVolumeInformation. Operating system error message: The specified path is invalid.
sapinst_dev.log________________________________:
TRACE 2014-09-24 21:10:33.238
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2014-09-24 21:10:33.238
Using custom value flow_trace for property SAPINST_MESSAGE_DEVLOG_THRESHOLD.
TRACE 2014-09-24 21:10:33.238
Using custom value info for property SAPINST_MESSAGE_GUILOG_THRESHOLD.
TRACE 2014-09-24 21:09:42.872 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\\sylib722.dll
TRACE 2014-09-24 21:09:42.873
exe dir is C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE 2014-09-24 21:09:43.017
MessageLib initialized successfully.
INFO 2014-09-24 21:09:43.20 [synxcpath.cpp:799]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel_test_24_Sep_2014_21_09_43.
INFO 2014-09-24 21:09:43.21 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel_test_24_Sep_2014_21_09_43.
TRACE 2014-09-24 21:09:43.22 [syxxclogbook.cpp:219]
PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
lib=syslib module=syslib
Initialized SAP kernel tracing to file C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel
TRACE 2014-09-24 21:09:43.23 [csicomponentsetmanager.cpp:112]
CSiComponentSetManager::readFrameworkJslib()
Reading framework jslib.
TRACE 2014-09-24 21:09:43.595 [csicomponentsetmanager.cpp:146]
CSiComponentSetManager::readFrameworkJslib()
Reading framework jslib done.
TRACE 2014-09-24 21:09:43.597 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iaguieng722.dll
TRACE 2014-09-24 21:09:43.598 [syxxclogbook.cpp:219]
PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
lib=syslib module=syslib
Initialized SAP kernel tracing to file dev_sap_kernel
TRACE 2014-09-24 21:09:48.153 [synxcuser.cpp:2083]
CSyUserImpl::isExistingOnOS() lib=syslib module=syslib
existence check for user Administrator returned true.
TRACE 2014-09-24 21:09:48.153 [syxxccache.cpp:419]
CSyAccountCache::addToCache(const IaPtr<CSyAccountImpl> account)
lib=syslib module=syslib
inserted account (Administrator, S-1-5-21-3086296020-3121675482-1484945983-500, USER) into the accountcache.
TRACE 2014-09-24 21:09:48.153 [cguiproxy.cpp:74]
CGuiProxy::doLog()
Waiting for client connection (1)
TRACE 2014-09-24 21:09:48.154 [synxccuren.cpp:901]
CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPINST_JRE_HOME', const iastring & 'C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362/jre')
lib=syslib module=syslib
Environment variable SAPINST_JRE_HOME set to value 'C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362/jre'.
TRACE 2014-09-24 21:10:12.858 [cguiproxy.cpp:74]
CGuiProxy::doLog()
Start client logon ...
TRACE 2014-09-24 21:10:12.858 [cguiproxy.cpp:398]
CGuiProxy::checkIfLogon
Connection request to guiengine backend by host child process at (736:740)
TRACE 2014-09-24 21:10:12.859 [cguiproxy.cpp:455]
CGuiProxy::checkIfLogon
GUI Protocol version is 3.1
TRACE 2014-09-24 21:10:12.859 [cguiproxy.cpp:456]
CGuiProxy::checkIfLogon
Send connect information
TRACE 2014-09-24 21:10:12.859 [cguilogon.cpp:246]
CGuiLogon::testForAutoLogon()
client connected from child process at (736:740)
TRACE 2014-09-24 21:10:13.46 [cguiproxy.cpp:74]
CGuiProxy::doLog()
Client successfully logged on from child process at (736:740)
INFO 2014-09-24 21:10:13.177 [synxcpath.cpp:799]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel_test_24_Sep_2014_21_10_13.
INFO 2014-09-24 21:10:13.178 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel_test_24_Sep_2014_21_10_13.
TRACE 2014-09-24 21:10:13.179 [csimanagerinterfaces.cpp:3798]
CSiManagerInterfaces::tryToLoadMessageDictionary
Loading G:/SOFT/COM/INST/messages.xml ...
TRACE 2014-09-24 21:10:13.349 [csimanagerinterfaces.cpp:3800]
CSiManagerInterfaces::tryToLoadMessageDictionary
Loaded G:/SOFT/COM/INST/messages.xml
TRACE 2014-09-24 21:10:13.361 [csimanagerinterfaces.cpp:3798]
CSiManagerInterfaces::tryToLoadMessageDictionary
Loading G:/SOFT/COM/INST/messages.xml ...
TRACE 2014-09-24 21:10:13.535 [csimanagerinterfaces.cpp:3800]
CSiManagerInterfaces::tryToLoadMessageDictionary
Loaded G:/SOFT/COM/INST/messages.xml
TRACE 2014-09-24 21:10:13.535
exe dir is C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362
INFO 2014-09-24 21:10:13.538 [synxcpath.cpp:799]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2014-09-24 21:10:13.539 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\x.
TRACE 2014-09-24 21:10:13.543 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iakdblib722.dll
TRACE 2014-09-24 21:10:13.543 [sixxcreate.cpp:46]
startInstallationViaStarter()
SAPinst build information:
Version: 2014.09.0
Build: 1521363
Compile time: Sep 15 2014 - 16:33:56
Make type: optU
Codeline: 720-2_REL
Platform: NTAMD64
Kernel build: 721, patch 319, changelist 1516453
Exe directory: C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE 2014-09-24 21:10:13.547 [csimanagerinterfaces.cpp:3798]
CSiManagerInterfaces::tryToLoadMessageDictionary
Loading G:/SOFT/COM/INST/messages.xml ...
TRACE 2014-09-24 21:10:13.728 [csimanagerinterfaces.cpp:3800]
CSiManagerInterfaces::tryToLoadMessageDictionary
Loaded G:/SOFT/COM/INST/messages.xml
TRACE 2014-09-24 21:10:14.109 [cproductchoicedialog.cpp:79]
CProductChoiceDialog::popUp
Reading product catalog...
TRACE 2014-09-24 21:10:15.410 [cproductchoicedialog.cpp:84]
CProductChoiceDialog::popUp
Reading product catalog done.
TRACE 2014-09-24 21:10:15.562 [cstartupfilereader.cpp:482]
CStartupFileReader::filterCatalogByConstraints()
Displaying unfiltered product catalog
TRACE 2014-09-24 21:10:15.969 [iaxxgenimp.cpp:411]
CGuiEngineImp::showDialog()
showing dlg diProductChoice
TRACE 2014-09-24 21:10:15.999 [iaxxgenimp.cpp:431]
CGuiEngineImp::showDialog()
<dialog sid="diProductChoice">
<title>Welcome to SAP Installation</title>
<dialog/>
TRACE 2014-09-24 21:10:16.262 [iaxxgenimp.cpp:1031]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2014-09-24 21:10:29.73 [iaxxdlghnd.cpp:96]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE 2014-09-24 21:10:29.73 [iaxxcdialogdoc.cpp:190]
CDialogDocument::submit()
<dialog sid="diProductChoice">
<dialog/>
INFO 2014-09-24 21:10:29.157 [synxcpath.cpp:799]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\x.
INFO 2014-09-24 21:10:29.158 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\x.
TRACE 2014-09-24 21:10:29.792 [cservicehelpers.cpp:318]
CServiceHelpers::assertCorrectFileProtection(C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP)
Permission check skipped when running on windows.
TRACE 2014-09-24 21:10:29.793 [iaxxgenimp.cpp:411]
CGuiEngineImp::showDialog()
showing dlg diRestartOrCancel
TRACE 2014-09-24 21:10:29.793 [iaxxgenimp.cpp:431]
CGuiEngineImp::showDialog()
<dialog sid="diRestartOrCancel">
Dialog does not contain standard input handler, so the backend is not able to generate a log entry
<dialog/>
TRACE 2014-09-24 21:10:29.793 [iaxxgenimp.cpp:1031]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2014-09-24 21:10:32.063
current working directory is C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
INFO 2014-09-24 21:10:32.69 [synxcpath.cpp:799]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2014-09-24 21:10:32.70 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\x.
TRACE 2014-09-24 21:10:32.73 [syxxcfile.cpp:125]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/dev_sap_kernel, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target file exists and (mode & ISyNode::EXISTING) ==> I will copy/move.
TRACE 2014-09-24 21:10:32.73 [synxcfile.cpp:478]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copying file C:/Users/Administrator/AppData/Local/Temp/sapinst_exe.2796.1411607362/dev_sap_kernel to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
INFO 2014-09-24 21:10:32.74 [synxcfile.cpp:678]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copied file 'C:/Users/Administrator/AppData/Local/Temp/sapinst_exe.2796.1411607362/dev_sap_kernel' to 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP'.
INFO 2014-09-24 21:10:32.75 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel.
TRACE 2014-09-24 21:10:32.75 [syxxcfile.cpp:125]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/dev_sap_kernel, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target file exists and (mode & ISyNode::EXISTING) ==> I will copy/move.
TRACE 2014-09-24 21:10:32.76 [synxcfile.cpp:478]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copying file G:/SOFT/COM/INST/dev_sap_kernel to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
INFO 2014-09-24 21:10:32.76 [synxcfile.cpp:678]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copied file 'G:/SOFT/COM/INST/dev_sap_kernel' to 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP'.
INFO 2014-09-24 21:10:32.116 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file G:\SOFT\COM\INST\dev_sap_kernel.
TRACE 2014-09-24 21:10:32.117 [syxxclogbook.cpp:219]
PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
lib=syslib module=syslib
Initialized SAP kernel tracing to file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\dev_sap_kernel
TRACE 2014-09-24 21:10:32.118
exe dir is C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE 2014-09-24 21:10:32.118
exe dir is C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE 2014-09-24 21:10:33.039
Running with toplevel file C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/toplevel.xml
TRACE 2014-09-24 21:10:33.050
Component version information: lmts_007_REL (CL 136598)
TRACE 2014-09-24 21:10:33.71 [syxxcfile.cpp:85]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst_dev.34.log, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-24 21:10:33.71 [syxxcnode.cpp:425]
CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst_dev.34.log, ISyNode::CopyMoveMode_t 0x3)
lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst_dev.log to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst_dev.34.log
TRACE 2014-09-24 21:10:33.88 [syxxcfile.cpp:85]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst.34.log, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-24 21:10:33.88 [syxxcnode.cpp:425]
CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst.34.log, ISyNode::CopyMoveMode_t 0x3)
lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst.log to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst.34.log
TRACE 2014-09-24 21:10:33.238
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2014-09-24 21:10:33.238
Using custom value flow_trace for property SAPINST_MESSAGE_DEVLOG_THRESHOLD.
TRACE 2014-09-24 21:10:33.238
Using custom value info for property SAPINST_MESSAGE_GUILOG_THRESHOLD.
TRACE 2014-09-24 21:10:33.247
Running with keydb file C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.xml
TRACE 2014-09-24 21:10:33.247
Running with dialog file C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/dialog.xml
TRACE 2014-09-24 21:10:33.370 [iaxxgenimp.cpp:694]
CGuiEngineImp::parseDialogXml()
Removing 'copyLocation' node from diCdServerMissingPackage
Removing 'copyLocation' node from diCdServerMissingPackageWithCdName
Removing 'copyLocation' node from diCdServerWithCdName
TRACE 2014-09-24 21:10:33.392 [syxxcfile.cpp:85]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-24 21:10:33.393 [synxcfile.cpp:478]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copying file C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.xml to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml
INFO 2014-09-24 21:10:33.396 [synxcfile.cpp:678]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copied file 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.xml' to 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml'.
TRACE 2014-09-24 21:10:33.867 [syxxcfile.cpp:85]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-24 21:10:33.867 [synxcfile.cpp:478]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copying file C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.xml to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml
INFO 2014-09-24 21:10:33.876 [synxcfile.cpp:678]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copied file 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml'.
TRACE 2014-09-24 21:10:35.715 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2014-09-24 21:10:35.824 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\statistic.xml
TRACE 2014-09-24 21:10:35.911 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2014-09-24 21:10:37.967 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2014-09-24 21:10:38.82 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\statistic.xml
TRACE 2014-09-24 21:10:38.173 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2014-09-24 21:10:39.560
Setting product specific properties:
SAPINST_USE_FWK_JSLIB=true
TRACE 2014-09-24 21:10:39.561
Using framework jslib.
TRACE 2014-09-24 21:10:39.572
SAPinst was started using commandline: C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\sapinst.exe
TRACE 2014-09-24 21:10:39.572
SAPinst properties are :
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Administrator\AppData\Roaming
COMPUTERNAME=RZABLAH01
ComSpec=C:\Windows\system32\cmd.exe
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
FP_NO_HOST_CHECK=NO
GUISERVER_DIALOG_PORT=
GUISERVER_HTTP_PORT=
HOMEDRIVE=C:
HOMEPATH=\Users\Administrator
JAVA_HOME=C:\Program Files (x86)\SAP\SAP JVM 6 (61_REL i486 opt)
JCE_POLICY_ZIP=
LOCALAPPDATA=C:\Users\Administrator\AppData\Local
LOGONSERVER=\\RZABLAH01
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PLMVIS_82_LIBPATH=C:\Program Files (x86)\SAP\FrontEnd\SAPgui\Program
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 58 Stepping 9, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=3a09
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
Path=C:\oracle\ECC\11203\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\SAP\SAP JVM 6 (61_REL i486 opt)\bin
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
SAPINST_AUTHENTICATION_UNLIMITED=0
SAPINST_CHECK_PACKAGES=false
SAPINST_CODE_GENERATION_USE_RECURSIONS=0
SAPINST_CONTINUE_AFTER_ERROR=
SAPINST_CONTROL_URL=control.xml
SAPINST_CWD=
SAPINST_DETAIL_SUMMARY=true
SAPINST_DIALOG_PIPES=
SAPINST_DIALOG_PORT=21212
SAPINST_DIALOG_URL=dialog.xml
SAPINST_EXE=SAPINST_EXE
SAPINST_EXECUTE_PRODUCT_ID=
SAPINST_EXEDIR_CD=G:/SOFT/COM/INST
SAPINST_EXE_DIR=C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
SAPINST_GENERATE_INIFILE=0
SAPINST_GENERATE_INIFILE_CONFIG_FILE=
SAPINST_GLOBAL_PARAMETER_TABLE=
SAPINST_GUI_ACCESSIBLE=0
SAPINST_HTTP_PORT=4239
SAPINST_INIFILE_MODE=
SAPINST_INIFILE_PARAMETER_MODE=
SAPINST_INPUT_PARAMETERS_URL=
SAPINST_INSTANCE_ID_GENERATION=
SAPINST_JAVA_CODE_GENERATION=
SAPINST_JAVA_COMPONENT_GEN_DIRECTORY=
SAPINST_JAVA_COMPONENT_GEN_LOG_FILENAME=
SAPINST_JAVA_COMPONENT_SNIPPET_DIRECTORY=
SAPINST_JAVA_COMPONENT_SNIPPET_NAME=
SAPINST_JAVA_EXT_DIR_DIRECTORY=
SAPINST_JRE_HOME=C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362/jre
SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,NWProfiles,ClusterMgt,SystemIdentity,NetworkMgt
SAPINST_JS_DEBUG=
SAPINST_JVM_PROPERTIES=
SAPINST_KEYDB_URL=keydb.xml
SAPINST_LABEL_IDX_URL=
SAPINST_LOG_GUI_UPDATE=0
SAPINST_MESSAGE_CONSOLE_THRESHOLD=info
SAPINST_MESSAGE_DEVLOG_THRESHOLD=flow_trace
SAPINST_MESSAGE_GUILOG_THRESHOLD=info
SAPINST_MESSAGE_HEADER=
SAPINST_MESSAGE_URL=.
SAPINST_MSLIB_TRACE=1
SAPINST_NO_GUISTART=0
SAPINST_NO_STEPBACK=0
SAPINST_OUTPUT_DIR=C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
SAPINST_PACKAGES_URL=packages.xml
SAPINST_PARAMETER_CONTAINER_URL=
SAPINST_PORT_AUTO=0
SAPINST_PROPERTIES_4_JAVA_STEPS_JVM=
SAPINST_REMOTE_ACCESS_USER=
SAPINST_REMOTE_ACCESS_USER_IS_TRUSTED=0
SAPINST_RESOURCE_URL=resourcepool.xml
SAPINST_RFCLIB_TRACE=0
SAPINST_SAVE_INPUT=true
SAPINST_SCAN_DEVICES=false
SAPINST_SDT_CURDIR_MODE=
SAPINST_SDT_PASSWORD=**********
SAPINST_SDT_USER=
SAPINST_SEND_ANALYTICS=true
SAPINST_SET_STEPSTATE=0
SAPINST_SKIP_DIALOGS=false
SAPINST_SKIP_ERRORSTEP=0
SAPINST_SKIP_SOLMAN_CHECK=0
SAPINST_SKIP_SUCCESSFULLY_FINISHED_DIALOG=0
SAPINST_SKIP_SUMMARY_DIALOG=0
SAPINST_SLIDE_SHOW_URL=slideshow.xml
SAPINST_SLP_CHANNEL_NAME=
SAPINST_SMART_COMPONENT=
SAPINST_STACK_XML=
SAPINST_START_GUI=1
SAPINST_START_GUISERVER=1
SAPINST_STEP_EXECUTION_MODE=
SAPINST_STOP_AFTER_DIALOG_PHASE=0
SAPINST_SUCCESS_ID=
SAPINST_TOPLEVEL_URL=toplevel.xml
SAPINST_USE_ADVANCED_JS_HANDLING=1
SAPINST_USE_DETAILED_LOG_DIRECTORY=0
SAPINST_USE_DEV_FEATURES=
SAPINST_USE_FWK_JSLIB=true
SAPINST_USE_HOSTNAME=
SAPINST_USE_MID=0
SAPINST_USE_OSBITS=
SAPINST_USE_OSFAName=
SAPINST_WRITE_GUIENGINE_BACKEND_TRACE=
SAP_DIR_PERF=C:\usr\sap\PRFCLOG
SELFEXTRACTOR_EXECUTABLE_NAME=G:/SOFT/COM/INST/sapinst.exe
SESSIONNAME=Console
SYSLIB_LOCKING_MODEL=
SecSpecialMode=710916
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\ADMINI~1\AppData\Local\Temp
TMP=C:\Users\ADMINI~1\AppData\Local\Temp
USERDOMAIN=RZABLAH01
USERDOMAIN_ROAMINGPROFILE=RZABLAH01
USERNAME=Administrator
USERPROFILE=C:\Users\Administrator
jce_policy_zip=
windir=C:\Windows
TRACE 2014-09-24 21:10:39.595 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iaejs722.dll
TRACE 2014-09-24 21:10:39.631 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iacdlib722.dll
TRACE 2014-09-24 21:10:39.635 [ccdmanagerpackagexml.cpp:128]
CCdManagerPackageXml::readLabelDefinitionFile()
Add packages from packages.xml; packageName:SAPINST, label: IND:SLTOOLSET:1.0:SWPM:*:WINDOWS_X86_64:*, media name:Software Provisioning Manager
Add packages from packages.xml; packageName:KERNEL, label: SAP:AKK:741:KERNEL:*:WINDOWS_X86_64:*, media name:Kernel NW740 SR1
Add packages from packages.xml; packageName:UKERNEL, label: SAP:AKK:741:UKERNEL:*:WINDOWS_X86_64:*, media name:UC Kernel NW740 SR1
Add packages from packages.xml; packageName:GATEWAY, label: SAP:AKK:741:KERNEL:*:WINDOWS_X86_64:*, media name:Kernel NW740 SR1
Add packages from packages.xml; packageName:CA, label: SAP:CA:741:UKERNEL:*:WINDOWS_X86_64:, media name:UC Kernel NW740 SR1 (folder CA)
Add packages from packages.xml; packageName:SMD, label: SAP:SMD:741:UKERNEL:*:WINDOWS_X86_64:, media name:UC Kernel NW740 SR1 (folder SMD)
Add packages from packages.xml; packageName:SCS, label: SAP:AKK:741:UKERNEL:*:WINDOWS_X86_64:*, media name:UC Kernel NW740 SR1
Add packages from packages.xml; packageName:SAPLUP, label: SAP:SAPLUP:741:*:*:*, media name:SL Controller (Kernel DVD)
Add packages from packages.xml; packageName:SCA_2, label: SAP:UT_ERP:SR1BS7I2013EHP7:*:*:*, media name:Java Component BS7i2013 SR1 on NW740 SR1
Add packages from packages.xml; packageName:J2EE, label: SAP:J2EE-CD:SR1740:J2EE-CD:j2ee-cd:*, media name:Java Component NW740 SR1 (folder JAVA_J2EE_OSINDEP)
Add packages from packages.xml; packageName:J2EE-ENG, label: SAP:J2EE-INST:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_J2EE_OSINDEP_J2EE_INST)
Add packages from packages.xml; packageName:J2EE-INST, label: SAP:J2EE-INST:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_J2EE_OSINDEP_J2EE_INST)
Add packages from packages.xml; packageName:SCA, label: SAP:UT:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_J2EE_OSINDEP_UT)
Add packages from packages.xml; packageName:CTC, label: SAP:CTC:NW04S:*:*:*, media name:Java Component NW740 SR1
Add packages from packages.xml; packageName:JAVA_EXPORT, label: SAP:JEXPORT:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_EXPORT)
Add packages from packages.xml; packageName:JDMP, label: SAP:JDMP:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_EXPORT_JDMP)
Add packages from packages.xml; packageName:JDMP_01, label: SAP:BPM_JDMP:SR1740:*:*:*, media name:Java Export SR1 (Vol.01)
Add packages from packages.xml; packageName:JDMP_02, label: SAP:JDMP_02:SR1740:*:*:*, media name:Java Export SR1 (Vol.02)
Add packages from packages.xml; packageName:JDMP_03, label: SAP:JDMP_03:SR1740:*:*:*, media name:Java Export SR1 (Vol.03)
Add packages from packages.xml; packageName:JDMP_04, label: SAP:JDMP_04:SR1740:*:*:*, media name:Java Export SR1 (Vol.04)
Add packages from packages.xml; packageName:JDMP_05, label: SAP:JDMP_05:SR1740:*:*:*, media name:Java Export SR1 (Vol.05)
Add packages from packages.xml; packageName:JDMP_06, label: SAP:JDMP_06:SR1740:*:*:*, media name:Java Export SR1 (Vol.06)
Add packages from packages.xml; packageName:JDMP_07, label: SAP:JDMP_07:SR1740:*:*:*, media name:Java Export SR1 (Vol.07)
Add packages from packages.xml; packageName:JDMP_08, label: SAP:JDMP_08:SR1740:*:*:*, media name:Java Export SR1 (Vol.08)
Add packages from packages.xml; packageName:JDMP_09, label: SAP:JDMP_09:SR1740:*:*:*, media name:Java Export SR1 (Vol.09)
Add packages from packages.xml; packageName:JDMP_10, label: SAP:JDMP_10:SR1740:*:*:*, media name:Java Export SR1 (Vol.10)
Add packages from packages.xml; packageName:EXPORT1, label: SAP:ECC:SR1617:EXPORT(1/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT2, label: SAP:ECC:SR1617:EXPORT(2/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT3, label: SAP:ECC:SR1617:EXPORT(3/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT4, label: SAP:ECC:SR1617:EXPORT(4/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT5, label: SAP:ECC:SR1617:EXPORT(5/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT6, label: SAP:ECC:SR1617:EXPORT(6/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT7, label: SAP:ECC:SR1617:EXPORT(7/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT8, label: SAP:ECC:SR1617:EXPORT(8/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT9, label: SAP:ECC:SR1617:EXPORT(9/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT10, label: SAP:ECC:SR1617:EXPORT(10/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT11, label: SAP:ECC:SR1617:EXPORT(11/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:MIGJDMP, label: SAP:MIGJDMP:73:*:*:*, media name:Migration Export (MIGJDMP)
Add packages from packages.xml; packageName:MIGAPPS, label: SAP:MIGAPPS:73:MIGRATION:*:*, media name:Migration Export (MIGAPPS)
Add packages from packages.xml; packageName:JMIG, label: SAP:JMIG:73:*:*:*, media name:Migration Export (JMIG)
Add packages from packages.xml; packageName:MIGEXPORT1, label: SAP:MIG:*:EXPORT(1/:*:*, media name:Migration Export (MIGEXPORT)
Add packages from packages.xml; packageName:RDBMS-ADA, label: MAXDB:*:RDBMS:MAX DB:WINDOWS_X86_64:*, media name:RDBMS MaxDB
Add packages from packages.xml; packageName:RDBMS-DB6, label: DB2/LUW:*:RDBMS:DB2/LUW:WINDOWS_X86_64:*, media name:RDBMS IBM DB2 for Linux, UNIX and Windows
Add packages from packages.xml; packageName:RDBMS-DB6-CLIENT, label: DB2/LUW:*:CLI/JDBC-DRIVER:DB2/LUW:*, media name:CLI/JDBC-Driver IBM DB2 for Linux, UNIX and Windows
Add packages from packages.xml; packageName:RDBMS-DB2-CLIENT, label: SAP:RDBMS-Client:10.1:DB2CONNECT:DB2 Connect for zSeries:*, media name:RDBMS Client IBM DB2 10 for z/OS
Add packages from packages.xml; packageName:TSAMP-DB6, label: IBM/TSA:*:DVD_TSAMP:*:*, media name:IBM Tivoli Systems Automation for Multiplatforms
Add packages from packages.xml; packageName:RDBMS-ORA, label: ORACLE:10.0G:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS Oracle
Add packages from packages.xml; packageName:RDBMS-ORA2, label: ORACLE:10.0G:RDBMS(2/:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 2
Add packages from packages.xml; packageName:RDBMS-ORA112, label: ORACLE:11.2:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 112
Add packages from packages.xml; packageName:RDBMS-ORA1122, label: ORACLE:11.2:RDBMS(2/:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 112 2
Add packages from packages.xml; packageName:ORACLI, label: ORACLE:11.2:CLIENT:*:WINDOWS_X86_64:*, media name:RDBMS Client Oracle
Add packages from packages.xml; packageName:ORACLI112, label: ORACLE:11.2:CLIENT:*:WINDOWS_X86_64:*, media name:RDBMS Client Oracle
Add packages from packages.xml; packageName:RDBMS-MSS, label: MSSQL:*:*:RDBMS:*:*, media name:RDBMS MS SQL Server
Add packages from packages.xml; packageName:RDBMS-SYB, label: SYBASE:*:RDBMS:*:WINDOWS_X86_64:*, media name:SAP ASE
Add packages from packages.xml; packageName:SRS-SYB, label: SYBASE:*:SRS:*:WINDOWS_X86_64:*, media name:SAP Replication Server
Add packages from packages.xml; packageName:RDBMS-HDB, label: HDB_SERVER:*:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS HANA Server
Add packages from packages.xml; packageName:RDBMS-HDB-CLIENT, label: HDB_CLIENT:*:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS HANA Client
Add packages from packages.xml; packageName:RDBMS-ADA, label: MAXDB:*:RDBMS:MAX DB:WINDOWS_X86_64:*, media name:RDBMS MaxDB
Add packages from packages.xml; packageName:RDBMS-DB6, label: DB2/LUW:*:RDBMS:DB2/LUW:WINDOWS_X86_64:*, media name:RDBMS IBM DB2 for Linux, UNIX and Windows
Add packages from packages.xml; packageName:RDBMS-DB6-CLIENT, label: DB2/LUW:*:CLI/JDBC-DRIVER:DB2/LUW:*, media name:CLI/JDBC-Driver IBM DB2 for Linux, UNIX and Windows
Add packages from packages.xml; packageName:RDBMS-DB2-CLIENT, label: SAP:RDBMS-Client:10.1:DB2CONNECT:DB2 Connect for zSeries:*, media name:RDBMS Client IBM DB2 10 for z/OS
Add packages from packages.xml; packageName:TSAMP-DB6, label: IBM/TSA:*:DVD_TSAMP:*:*, media name:IBM Tivoli Systems Automation for Multiplatforms
Add packages from packages.xml; packageName:RDBMS-ORA, label: ORACLE:10.0G:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS Oracle
Add packages from packages.xml; packageName:RDBMS-ORA2, label: ORACLE:10.0G:RDBMS(2/:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 2
Add packages from packages.xml; packageName:RDBMS-ORA112, label: ORACLE:11.2:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 112
Add packages from packages.xml; packageName:RDBMS-ORA1122, label: ORACLE:11.2:RDBMS(2/:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 112 2
Add packages from packages.xml; packageName:RDBMS-ORA121, label: ORACLE:12.1:RDBMS:*:WINDOWS_X86_64:*, media name:Oracle RDBMS 121
Add packages from packages.xml; packageName:RDBMS-ORA1212, label: ORACLE:12.1:RDBMS(2/:*:WINDOWS_X86_64:*, media name:Oracle RDBMS 121 2
Add packages from packages.xml; packageName:ORACLI, label: ORACLE:11.2:CLIENT:*:WINDOWS_X86_64:*, media name:RDBMS Client Oracle
Add packages from packages.xml; packageName:ORACLI112, label: ORACLE:11.2:CLIENT:*:WINDOWS_X86_64:*, media name:RDBMS Client Oracle
Add packages from packages.xml; packageName:RDBMS-MSS, label: MSSQL:*:*:RDBMS:*:*, media name:RDBMS MS SQL Server
Add packages from packages.xml; packageName:RDBMS-SYB, label: SYBASE:*:RDBMS:*:WINDOWS_X86_64:*, media name:SAP ASE
Add packages from packages.xml; packageName:SRS-SYB, label: SYBASE:*:SRS:*:WINDOWS_X86_64:*, media name:SAP Replication Server
Add packages from packages.xml; packageName:RDBMS-HDB, label: HDB_SERVER:*:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS HANA Server
Add packages from packages.xml; packageName:RDBMS-HDB-CLIENT, label: HDB_CLIENT:*:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS HANA Client
Add packages from packages.xml; packageName:LIVECACHE, label: LIVECACHE:LCA10:LC79:WINDOWS_X86_64:*, media name:liveCache 7.9
Add packages from packages.xml; packageName:SAP_CS, label: SAP:SAP_CS:*:*:PPMS component SAP_CS:PPMS-LABEL, media name:Content Server 6.40/6.50
TRACE 2014-09-24 21:10:39.644 [ccdmanagerimpl.cpp:312]
CCdManagerImpl::goToRootDirAndScanForPackages()
Searching for packages. Found: IND:SLTOOLSET:1.0:SWPM:*:WINDOWS_X86_64:* in G:/SOFT/COM/INST
Searching for packages - not a valid path or not accessible: G:/SOFT/COM\/LABEL.ASC
Searching for packages. Nothing found in G:/SOFT/COM\
Searching for packages - not a valid path or not accessible: G:/SOFT\/LABEL.ASC
Searching for packages. Nothing found in G:/SOFT\
Searching for packages - not a valid path or not accessible: G://LABEL.ASC
Searching for packages. Nothing found in G:/
TRACE 2014-09-24 21:10:39.656 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iaccdlib.dll
TRACE 2014-09-24 21:10:39.656 [ccdmanagerimpl.cpp:872]
CCdManagerImpl::lookForPackages()
WARNING 2014-09-24 21:10:39.657 [synxcpath.cpp:1010]
CSyPath::getOSNodeType(bool) lib=syslib module=syslib
Unable to get information about path \\LABEL.ASC\ using GetVolumeInformation. Operating system error message: The specified path is invalid.
TRACE 2014-09-24 21:10:39.658 [ccdmanagerimpl.cpp:872]
CCdManagerImpl::lookForPackages()
TRACE 2014-09-24 21:10:39.839
SAPinst build information:
Version: 2014.09.0
Build: 1521363
Compile time: Sep 15 2014 - 16:33:56
Make type: optU
Codeline: 720-2_REL
Platform: NTAMD64
Kernel build: 721, patch 319, changelist 1516453
Exe directory: C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE 2014-09-24 21:10:39.849 [syxxsyshlp.cpp:151]
syslib::logSystemState() lib=syslib module=syslib
Process environment
===================
Environment Variables
=====================
=C:=C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP
=G:=G:\SOFT\COM\INST
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Administrator\AppData\Roaming
COMPUTERNAME=RZABLAH01
ComSpec=C:\Windows\system32\cmd.exe
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Administrator
JAVA_HOME=C:\Program Files (x86)\SAP\SAP JVM 6 (61_REL i486 opt)
LOCALAPPDATA=C:\Users\Administrator\AppData\Local
LOGONSERVER=\\RZABLAH01
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PLMVIS_82_LIBPATH=C:\Program Files (x86)\SAP\FrontEnd\SAPgui\Program
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 58 Stepping 9, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=3a09
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
Path=C:\oracle\ECC\11203\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\SAP\SAP JVM 6 (61_REL i486 opt)\bin
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
SAPINST_EXEDIR_CD=G:/SOFT/COM/INST
SAPINST_JRE_HOME=C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362/jre
SAP_DIR_PERF=C:\usr\sap\PRFCLOG
SELFEXTRACTOR_EXECUTABLE_NAME=G:/SOFT/COM/INST/sapinst.exe
SESSIONNAME=Console
SecSpecialMode=710916
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\ADMINI~1\AppData\Local\Temp
TMP=C:\Users\ADMINI~1\AppData\Local\Temp
USERDOMAIN=RZABLAH01
USERDOMAIN_ROAMINGPROFILE=RZABLAH01
USERNAME=Administrator
USERPROFILE=C:\Users\Administrator
windir=C:\Windows
User: RZABLAH01\Administrator, Id: S-1-5-21-3086296020-3121675482-1484945983-500
Working directory: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeTimeZonePrivilege, display name: Change the time zone, not enabled.
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeCreateSymbolicLinkPrivilege, display name: Create symbolic links, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, diHello Rafael,
I'm also about to install an IDES EHP7 ERP 6.0 and have seen that the Support Release 2 is available. Perhaps this will help you to go forward.
Best regards,
GP -
Direct connectivity of SAP ERP to FIM.
Hi.
does anyone know if SAP ERP can be connected to FIM directly without file?
please help me with this question.
thank you.
HitomiHI Harold,
we are also planning to migrate our ERP on SQL to HANA can you please share any documents related to it.
that would be really helpful for us.
thanks in advance.
Regards,
Vamsi Alluri -
Oracle 10g RAC installation on HP-UX 11.31 for SAP ERP 6.04
Dear experts,
We are trying to install SAP ERP 6.0 EHP4 with Oracle 10g RAC on HP-UX 11.31. Please note that, We are using VERITAS cluster filesystem (CFS) for this purpose and not HP-UX ServiceGuard ClusterFileSystem.
*As per SAP procedure, we have installaed plain plain SAP system with single instance Oracle (ref: Configuration of SAP NetWeaver for Oracle Database 10gRAC guide). Now we are first trying to install Oracle Clusterware (CRS) and then we will install Oracle RAC software. Is this procedure right?*
Which file (and its path) we have to use for CRS installation and its patch? Is it runInstaller under /oracle/stage/102_64/clusterware? With this file we can install CRS 10.2.0.1. Similarly for Oracle RAC, which files we are supposed to use, i.e for installation and patch upgrade?
Also can we use clusterware package available from Oracle directly in the SAP environment?
We tried to install CRS with runInstaller while running Configuration Assistant after root.sh script.
The following commands are failing in Configuration Assistant:
/oracle/CRS/102_64/bin/racgons add_config erpprdd1:4948 erpprdd2:4948
/oracle/CRS/102_64/bin/oifcfg setif -global lan1/20.20.20.0:cluster_interconnect lan0/192.168.3.0:public
/oracle/CRS/102_64/bin/cluvfy stage -post crsinst -n erpprdd1,erpprdd2
1st command does not give any output if run manually.
2nd commands o/p: PRIF-12: failed to initialize cluster support services
3rd commands fails in every check
Please suggest the solution and expecting answers to the above mentioned questions.
Thanks & Regards,
Tejas>
Charles Yu wrote:
> Q1: Oracle RAC with 9.2.x on HP-UX?
> A: For HA environment, cluster software is: MC/SG on HP-UX 11.31; there are optional components of MC/SG for supporting Oracle RAC and SAP application. I was confused that I could not find the installation guide regarding 4.6C on MC/SG HA environment of HP-UX.
> Charles
Relevant docs for Service Guard (SG) cluster are available at http://docs.hp.com. Hope you have checked for the suport of oracle 92x on HP-UX 11.31
>
Charles Yu wrote:
> Q2: Any reason why you don't use a supported database version?
> A: Actually, in order to avoiding the the risk of database upgrade and minimizing the migration risk, top level has decided that keeping the same Oracle version. Indeed, we don't plan the migration of application. On the other hand, it is complicated to do the assessment for application migration.
> Charles
You can go for combined os migration and db release upgrade also at a stretch with the same downtime. -
Acquiring sales data from SAP ERP
(While evaluating Lumira, after watching promoclips, reading papers and working with the free trial some questions are still unanswered. I kindly ask you for help… Supporting a clear structure, I decided to open a separate thread for each question.)
How’s about connecting Lumira to a SQL-based SAP Instance to analyze sales data? Does SAP provide a “Business Content” similar to SAP-BW or do I have to join all the affected tables manually?
How would the scenario above be if I connect Lumira to a HANA-bases SAP Instance?
Any help would be appreciated, thank you in advance!Hi,
there are a couple of similar threads already, which might give you suggestions:
Retrieve Data from ERP Infosets
SAP Lumira: Getting Familiar Freehand SQL Against SAP ERP - then to iPad
both those links discuss using 'freehand sql' drivers in Lumira to connect to ERP Infosets . (a kind of ECC query)
a similar approach, going via Business Objects BI 4, would be to have a Universe ontop of Infoset, and Lumira connects to BI4 to consume the Infoset Universe.
In both cases, the prerequisite is the definition of said 'infoset' - the creation of which would be handled by content creators within ECC environment, not likely the Lumira user.
Regards,
H -
Is there any upragde tools for SAP B1 to SAP ERP?
Hi,
I know, SAP B1 and SAP ERP are totally different SAP products.
In my mind, maybe we should implement the new SAP ERP, and then, migrate the old master data from B1 to ERP...
So, is there any upragde tools or procedure (or data migration tools)for the project of upgrade SAP B1 to SAP ERP?
Is there any documentation for this?
Many thanks in advance.
BR,
RandyIt is not listed on the official roadmaps
Lumira:
https://websmp206.sap-ag.de/~sapidb/011000358700000212382013E.pdf
Analysis Office:
https://websmp206.sap-ag.de/~sapidb/011000358700000395262012D.pdf
For Lumira we asked at BI 2014 the other week and they said they were working on it.
You can register for this ASUG Analysis Office Roadmap and ask SAP on the webcast about it:
May 12: Analysis Office Roadmap
Same for Lumira - see these upcoming ASUG webcasts - especially Q&A:
May 15: Lumira Self Service for Business User
May 21: SAP Lumira Question and Answer Session
Maybe you are looking for
-
How do I reset the e-printer's web embedded server network password?
I have an HP Photosmart 7520 e-all in one. I use Windows 7. I could tried to set a password in the EWS network tab. I could not change the user name so it remains "admin". I set the passwork and it seemed ok. But when I tried to log on again, it wou
-
MacBook Air w/o DVD drive = No Digital Copy Downloads?!
I have a Mar/12 11" Macbook Air. I recently decided that I would transfer all of my movies to digital and download the digital copies to my hard drive. Even though I have the proper (and unused) code, the instructions say I have to insert a disk fir
-
Code to display hindi fonts in JComboBox in a JFrame
Hi friends, My mail id is [email protected] and please give response as soon as possible. My problem:In java,my Jcombobox contents is displaying only english fonts like arial or verdena or timesnewroman My requirement: I want source code or logic to
-
All, I'm stumped. I have upgraded two Grid Control servers to 10.2.0.5 (non-RAC'd) and one of the servers let me download agent software under the Deployments->Download Agent Software page but the other Grid Control server is giving me and error on a
-
Hi Experts, How to give the New Start and End date to the org.unit and position. Regards Karthik