Migration to new IMAC from old IMAC with a Backup Drive

I purchased an new IMAC and have an old IMAC and have migrated all of my stuff from old to new, except I have a external backup drive on the old IMAC and did not migrate it. I thought that I would migrate by attaching it to the new but do not have the right cables. Can I connect the backup drive to the old with the firewire that I have and connect the old IMAC to the new one with the cables that I used, or do I have to buy the right connector to connect the backup to the new IMAC.
Thanks

http://support.apple.com/en-us/HT5872 Move your data to a new Mac
Setting-up a new Mac from an old one, its Backups, or a PC

Similar Messages

How do I download/install Photoshop & Premiere Elements 10 on new iMac with no disc drive?

My iMac hard drive recently failed and I lost everything. I just bought one of the new iMacs with no disc drive. I had purchased Photoshop CS5 in 2011 but it came with CD's for install. I stil have them but it doesn't do me any good since there is no disc drive to put them in on the new computer. How can I install Photoshop using my serial number from my original purchase? I downloaded the CS6 trial version and when I try to activate it with my old serial number it says it is invalid.

There are links to trial installers on pages:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Very carefully read and follow the instructions on the pages!
Download and install the trials, launch and activate them with your serial number then do 'Help > Updates'.

How can I install Photoshop CS5 on a new iMac with no disc drive

How can I install Photoshop CS5 on a new iMac with no disc drive?

Hi,
Please copy this Link http://trials2.adobe.com/AdobeProducts/PHSP/12/osx10/Photoshop_12_LS1.dmg?PID=2159997
Now open Adobe.com and go to Products Trials. Click on Acrobat Try now and once the download page appears then paste the above mentioned link in the address bar and then press Enter. Download should start immediately.
Please let me know if it helps.
regards,
Abhijit

I just bought the new IMAC with the Fusion Drive 3t. Can I use the Bootcamp systemwith it? If not what do you suggest? I relly need the bootcamp for quicken

Good morning,
I just bought the new IMAC with the Fusion drive 3T. Can I use it with bootcamp beacuse I need for Quicken?If not any suugestion?

You can't use Boot Camp in 3 TB drives. You can download VirtualBox, Parallels or VMware Fusion and install Windows on a virtual machine. See > https://discussions.apple.com/docs/DOC-3321

I recently purchased a new iMac with an external drive. I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac. Comments? Help?

I recently purchased a new iMac with an 1 Terrabyte external drive. I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac. I have not downloaded the external drive's software onto my old Mac because of this concern. May I simply "drag and drop" the contents I want transferred to the external drive, then set up my new Mac with the drive and download there? or is there a better procedure? Comments? Help?

If your intention is to copy a just documents and data (word processing files and music for example) then yes, you can use drag and drop. If you want to transfer data and applications and permissions, it would actually be easiest to connect the drive to your old computer and turn on TimeMachine. Once TM is finished, connect the drive to your new computer and restart it holding the option key to get into Recovery mode. Then you can use the restore from TM option to transfer your data and programs to the new computer.

IPhoto can't find server volume after migration to new iMac with 2 HDs

Hi all,
I recently moved to a new iMac from an older Mac Pro. The new iMac has 2 hard drives (256GB SSD & 2TB HD) with all the programs installed on the SSD and the HD is used as the main file storage drive. iPhoto is installed on the SDD and its library of pictures are on the HD. My latest photo imports are working fine but the older pictures can't be properly opened, I get the following warning everytime I double click on a thumbnail:
Clicking on "Cancel" gets the following responce:
When I look at the info of the premigration thumbnails it says the pictures are located on the correct HD. The new pictures also show them as being in the same location but I'm having no problem opening the post migration pictures.
I'm thinking about trying out Aperature but want to get this linking problem sorted out first.
Any ideas how I should go about relinking "thousands" of pictures..?

Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

How to get batch recognition of (!) on some tracks after moving library from external hard drive to new iMac (with terabyte hard drive)?

I'm using Lion 10.7.2 and iTunes 10.5.2
I have moved my iTunes music from an external hard drive onto my new iMac (with a terabyte hard drive) with music folder organized - when I try to play some tracks I get the iTunes can't locate warning and so I follow through and show iTunes the track - they are all in the music folder on my iMac hard drive - they all copied over and they all appear in the iTunes library list - so far as I can tell out of a 500 gigabyte music collection - but there are so many giving me the error - many other tracks function as they should too, some work others don't - So I'm looking for a way to get all the error tracks fixed in a batch correction way. Doing this individually with each track just isn't realistic.
Can anyone suggest how I might fix this issue?
Also, after I show iTunes the song location and it plays, I get a find files prompt that looks like it wants to find other files, but that just causes the process to jam and I have to force quit iTunes and then it doesn't remember what I last showed it next time I open iTunes.
Also I'm trying to avoid the use of the consolidate function because that would copy a whole other set of music - not in iTunes - that is in the process of being edited (audio hijack pro and fission tools being used to put vinyl and tapes to mp3) But all that other music just means the consolodate function across my whole computer would be too much.

Some details seem to be coming into focus - I have started scrolling through the main library list A to Z repairing tracks individually (there are thousands, but it's what works so far) - as I work through, it appears the problem occurred on tracks where album artist metadata was different than song artist metadata, predominantly. I'm not sure that is 100% the case in every instance, but that is what it's looking like. I don't why that happened, must be some technical glich I guess.
Also, I tried running Doug's Scripts - the one titled, iTunes Track CPR v1.3 - it is supposed to fix exactly the kind of issue I'm having - I bet it would work for some people with a similar issue - but for my case it only identifies the 'de-linked' tracks and doesn't repair them - that is at least helpful as I scroll though to fix them - I can see exactly which tracks have the issue quickly after running that script - but iTunes doesn't remember that warning symbol after a log-out, so it's only worth running the script on a set of tracks I intend to review and fix in any given session at a time.
If you are interested, Doug's free scripts can be found at
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
there are other interesting and useful iTunes scripts there too...
also, unrelated to the issue I'm having, I found a lot of really useful and time saving metadata fixing free scripts at - hubi's iTunes scripts - the page isn't English, but the script download is easy to find -
hubi's scripts work for batch selections of tracks - so if you import an album and find the metadata screwed up somehow, you can select the whole set of screwed up tags at once (even across a series of albums), run the easy to use script, and watch it all be fixed automatically while you sit back and relax...
http://hubionmac.com/wordpress/category/softwareschmiede/applescripting/itunes/
just for reference, here is a sampling of what hubi's scripts can do...
there are other useful scripts out there - the tough part can be finding the one that helps you...
01-(un)capitalizes
01-(un)capitalizes
This script changes.... THIS TEXT into This Text... or this text
01-Delete spaces
Sometimes invisible blanks are behind an artist name or album name...this script deletes these blanks behind or infront of the strings
01-Delete x first-last chars. of Title
A Name like "01--Ray Of Light" will be changed to "Ray Of Light" and the01 will be entered in the tracks tracknumber id3 field =)
01-fix combined Artist-Title
Sometimes Tracknames look like:
"Madonna---Ray of Light" and in the artist field you see something like"Ripped by Me"... this script puts Madonna back to the right field... all youhave to do is to enter the right delimiter ("---" in this case)
01-switch Artist<->Title...
Switch ID3 field a with ID3 field b (not only Artist with Title any more =)!
01-z_filename ->Title
Sets the ID3 field Title to the track's filename)
01-z_trackNr-Filename->ID3
When a track's filename look like "01-Madonna-Ray of Light.mp3" andyou don't have the track's tracknumber stored in the ID3 Tag... this Scriptcan do this for your =)

Can you attach an external HD to the new iMac with a fusion drive?

I'm trying to decide how to configure the new iMac I am going to buy. Can you attach an external HD to an iMac with a fusion drive? I'm assuming it would be fine, but since the fusion drive is new, I don't want a nasty surprise. Some of the new Mac Minis now have fusion drives, so has anyone added an external drive to it?

This was a concern expressed in this thread: Worrying reply to Apples FAQ on new Fusion Drive
However, Apple has since amended the FAQ, clarifying their earlier Fusion confusion.
Therefore I believe the answer is yes, you can add an external USB HD. If Apple would only state that explicitly in this document, it would eliminate all doubt.

Trying to install iwork '09 from dvd on new imac with no dvd drive.....iwork is brand new (bought off ebay) in unopened box....I have at my disposal an older imac with dvd drive and a 16GB thumb drive...what is best way to load iwork on the new imac?

bought my mom a new imac this xmas...didn't realize it has no dvd drive....just picked up a new unopened version of iwork '09 for her to use off of ebay....need to get it loaded on the new dvddriveless imac......I have an imac at my house with a drive and a thumb drive i could bring over to her house if I could somehow burn an image of the iwork dvd on the thumb drive...is this possible? is there a better solution other than buying an external dvd drive?

First use Disk Utilty to make a disk image of the iWork disc on your iMac. Then there are two easy ways to install on your mothers new iMac. One is to copy to your USB thumb drive, visit your mother and install from the thumb drive. The other is to use a free upload and download service like www.wetransfer.com. Upload the .dmg disk image via www.wetransfer.com, then your mother downloads and installs. After installation you'll need to update iWork for Mountain Lion compatibility.

Installing PSE 9 on new iMac with no CD Drive.

I bought a new iMac and cannot figure out how to install a new copy of Elements 9. I have a disc that I previously used to install on my Macbook, but now I do not have a Cd drive on my new computer. Tried to transfer the software using an external hard drive but it did not work. Any help?

First of all this:
Tried to transfer the software using an external hard drive but it did not work
Did you try to migrate an installed version of PSE? If so, you have your work cut out for you before you can install it.
As for the disc, if you have access to another computer, even a windows computer, you can copy the files from the disc to something like a thumb drive and use that. If you're near an Apple Store they will sometimes let you make the copy there.

"No Boot Disk" on new iMac with external optical drive

So I am experiencing a problem similar to what some people have had, but I have the brand new iMac which does not come with a cd drive.
I have a fusion drive in the iMac.
I downloaded Windows 7 Ultimate from my University software store, which gave me a .img file. I burned this file to disk in order to make the boot drive.
I am using an amazon basics DVD optical drive which connects to my computer via USB.
Upon boot into windows, it does not recognize the dvd in the drive as bootable, and says "No Bootable Disk Found, Press Any Key". Of course, I have a bluetooth keyboard and cannot press any key because there are currently no drivers.
So, any ideas on why it won't recognize my boot dvd?

It was just a simple case of removing the verbose boot settings which I found a script for after searching on Google.

Time Machine stalls on first backup of new iMac with 3TB Fusion Drive

I've got a brand new 27" iMac with latest patches up to OS X 10.9.1. I've loaded about 500GB of data onto this machine and wanted to make an intial Time Machine backup, so I connected a brand new 4TB Seagate Backup Plus USB 3.0 external hard drive, formatted the drive as Mac OS Extended (Journaled), pointed Time Machine at it, and let it go. It ran up to about 30GB before I walked away. When I came back maybe 8–10 hours later it was still stopped at about 30GB. I stopped it, and tried again. This time it just went a couple of GB before halting. I can hear the external drive stop spinning because it isn't being accessed.
I also have a new 2TB Western Digital My Passport USB 3.0 external drive, so I formatted that as Mac OS Extended (Journaled) and tried setting it as the Time Machine drive instead. Again Time Machine gets a little way into the backup before stalling and proceeding no further. I think this rules out the drive, since both drives behave the same way.
I also have Super Duper installed on this machine, so I tried doing a full disk copy to the WD drive and this worked flawlessly. This suggests that nothing is wrong with the drives themselves, as does the successful check of all three disks with Disk Utility.
I've checked "Prevent computer from sleeping automatically when the display is off" in Energy Saver. I've unchecked "Put hard disks to sleep when possible". I've checked "Enable Power Nap". I set Time Machine back to using the 4TB Seagate Drive and have been letting it run as long as it wants to. It got up to 13.32GB this morning before seeming to stall this morning. 10 hours later when I got from work it's still at 13.32 GB and it still says "About 7 hours remaining", just as it did at 8:30am.
I've read a bunch of discussions on here about issues like this, which is where I came up with some of the things I've tried. So far, nothing has worked. Can anyone suggest a working solution? It seems like the Time Machine software just isn't workin

Pondini's site is excellent, but didn't happen to cover this problem (or Mavericks in particular as of yet). But I did call AppleCare support as you suggested, rkaufman87, where I was quickly escalated since I'd already tried the things the first tier support people start with. After some investigation via screen sharing and inspection of my system log (which suggested the stall involved issues with the index) the main change we made was to clear out the Time Machine preference files and Spotlight's cache before rebooting and trying again. This time the backup completed without stalling, and has continued to work ever since. Thanks for encouraging me to call support!

My (brand new) imac with flash hard drive freezes after mavericks update

after updating to the new mavericks my new imac has been slowed down -
when scrolling in finder to select files and tag them it freezes and "thinks" after each file
your help appreciated
its brand new ( only a month old ) and was lightning fast before

after updating to the new mavericks my new imac has been slowed down -
when scrolling in finder to select files and tag them it freezes and "thinks" after each file
your help appreciated
its brand new ( only a month old ) and was lightning fast before

Buying a new iMac with no cd drive, how do I upload purchased cd's to itunes

Hi, I will be purchasing the new iMac in November which has no cd drive, how do I upload purchased cd's into iTunes?
Thanks

You will need to purchase an external optical CD/DVD disc writing drive.

How to setup new notebook from HP laptop with bad hard drive

Got kids a new Hp laptop in June. The hard drive has been getting progressively louder and is obviously about to go, with a blue screen error forcing a roll back of the computer. I have done a full backup to an external hard drive and I am returning this for a replacement. Should I make a recovery disc and reinstall from the disc when I get the new laptop, or should I just plug in the external hard drive and transfer the files over? A guy at work says using the recovery disc is the way to go, because it would reinstall Norton and all the other programs we have installed., but I thought the external hard drive backup was supposed to be the way to do this
This question was solved.
View Solution.

Not sure I understand the question. "Should I make a recovery disc and reinstall from the disc when I get the new laptop, or should I just plug in the external hard drive and transfer the files over?" Usually HP replaces only the hdd.
If you are receiving a new hdd to put it the laptop, yes you need to burn the Recovery Disks to reinstall Windows & original software on it. You can then use your backup to restore files.
IF the full backup you are referring to is a complete System Image, it can be used to restore Windows, programs and all files,etc on the new hdd. You do need to also burn the Repair CD to boot from and restore the System Image on the new hdd.(I would still burn a Recovery DVD set to have as a fallback)
If you are receiving an entire laptop replacement it will have everything installed on it. You will just have to restore your personal files from the backup
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Migration to new IMAC from old IMAC with a Backup Drive

Similar Messages

Maybe you are looking for