Migration to new mac and now compressor wont work

after a migration - new 6 core - my final cut studio (2) - doesn't all work. final cut works, but compressor tells me to restart or verify that my instillation is correct. DVD studio doesn't work either....
help!!!
thanks
MR C

David is spot on. Follow his advice.
You need to understand that if you were running a G5 - a PowerPC chip computer - and migrate to an Intel chipped computer, the binary code to run the program on the new computer will not be present. Your G5's FCS installation doesn't have any intel code on it. FCS requires intel specific code on intel machines.
Also, you will need FCP v5.1 or higher to run on the intel machine. v5.0 or lower is not supported.
Heck, even migrating pro apps between machines on the same processor can be problematic due to the specificity of the chips and how FCS stashes system files. Sometimes they are not copied over or the frameworks are the wrong one for the processor or version of OSX.
Best practice is to always do a fresh installation from the disks (or disk images) then use software updater to bring it up to the current update.
x

Similar Messages

New software and now apps wont work.

Hey guys,
I have the iphone 4 and just updated my phone to the newest software. The download went fine but I realized a little while later that the apps that I have purchased won't open. I replugged it into my computer and syncd it again, but that did not help. When an app such as Facebook or Twitter is clicked on it looks likes it going to open but then just closes. Any suggestions?
Thanks.

Try the basics from the manual ; restart, reset, restore

The new itunes update will not install properly and now itunes wont work at all

k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.

My issue is it wont even reinstall onto my computer
Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.)

My itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens

my itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens. Please help me I've tried uninstalling it and downloading it again but that didnt help :/

DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

New iMac and iDVD just wont work!

All,
Just got a new iMac and iDVD just wont work, from creating a new project, or opening an old one, or trying to share from iMovie (HD)
If I try to do anything nothing seems to happen and when I close the program a window does appear and from there it just freezes.
Have deleted and reinstalled iDVD, repaired permissions, all up to date in my on software updates...any ideas?
Thanks
Zara

*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
or
Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
No of Colors - must be set to millions
EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
Yours Bengt W

I downloaded the update and now it wont work.

I downloaded the update and now it wont work. It just shows me a screen with a lightning chord going to the Itunes icon. Am I supposed to plug it into my mac or something?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

I accdently formated my shuffle and now it wont work what do i do?

I accdently formated my shuffle and now it wont work what do i do?
That and when I plug the shuffle in to the comp iTunes doesn't reconize that the shuffle is pluged in.
it has updated a-few times. and when iTunes sees that the shuffle is in the comp it tells me that the songs are on the shuffle.............but when i unplug it and put my headphones in no music comes out of it!
so what am i to do
shuffle 512MB Windows XP

I'm having the same problem! My good-for-nothing brother has formatted iPod shuffle through "My Computer" and now it won't work. Neither iTunes nor iPod software updater recognise the thing. To be honest, neither application even start when the shuffle is plugged in! And now I've just read that apple says you "SHOULD NOT FORMAT" shuffle. What am I to do? Have I lost my iPod for ever?

I updated my iphone to the ios6 and now it wont work.

i updated my iphone to the ios6... and now it wont work at all.
it wont even turn on, it keeps going back and forth between the black screen and then the apple mark pops up for a few seconds, and then turns back to the black screen again... and that just keeps going on...
someone please help...

Seems like ios6 isn't any good for any of their devices. I have an iPhone 4 and recently updated to ios6 and have had all the wifi problems and apps getting hung up on load screens. Restore is your best bet and downgrade if you can back to ios 5.1. If restore doesn't help with a fresh install of ios6 then call every Apple support number you can find and be heard like the 1,000s of other people like us with ios6 problems demanding support. There doesn't seem to be any quick fixes for ios6 other than an update from Apple.
<Edited By Host>

I connected my ipod before installing softwear and now it wont work

i connected my ipod before installing softwear and now it wont work...like abosolutely nothing...its frozen

First of all, try resetting the iPod. It may take several attempts and is best done connected power.
Then download the iPod Updater, install this to your computer, restart the computer, run the Updater, then connect your iPod when prompted (not before), then follow the set up procedure.

I just deleted 300 messages on my iphone 4 and now it wont work. What to do?

I decided to delete about 300 messages from my iphone 4 and now it wont work. I can't sent any messages. I tried to turn off my phone... But nothing seems to work. Please help!

Reset the device by pressing and holding the home and power buttons until the white Apple logo appears.

Downloaded IO5 to my 3gs and now it wont work

I just tried to download IO5 to my 3GS and now it wont work, boots up in Japanese or maybe arabic and wont let me do anything, was working OK before the download, Itunes says "no sim card present"
Please help

Keep trying. The update server is overloaded. You will eventually get through and your update will continue where it left off.
I got the error message about 12 times before it finally connected and continued.

Hi I updated my apple tv box and now it wont work? Can I reset it?

Hi I updated my apple tv box and now it wont work? Can I reset it?

That usually indicates that security software is interfering with the process
See
http://support.apple.com/kb/TS3125

TS1490 updated to new verison and now it wont open itunes store..

updated to new verison 10.63 and now it wont open itunes store..very vey upset.

it just says accessing itunes store but will not open
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Updated iphone to iso6 and now camera wont work, any suggestions

updated iphone to the new software, and now my camera wont work. When you click on it it stays blank.

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Microsoft has automatically updated itself on my pc and now firefox wont work

microsoft has automatically updated itself on my pc and now firefox wont work

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Migration to new mac and now compressor wont work

Similar Messages

Maybe you are looking for