Migration with rman on same platform

Hello Gurus
I need to migrate my database of 200gb from one server to another in aix having same platform and same version of database oracle 10g.
Just need to shift it from one server to another.
I need an rman document to do the same.
If anybody has it or did some same stuff please share the same.
Regards

See the documentation
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmrecov.htm#i1007814
Hemant K Chitale

Similar Messages

  • Migrating with RMAN from 10g to 11g

    Hi gurus,
    I am following the following procedure to migrate database from 10g to 11g using rman
    Source side:
    RMAN>connect target
    RMAN>backup database;
    RMAN>backup archivelog all;
    RMAN>backup current controlfile;
    SQL> create pfile from spfile;
    Copied datafile, archivelog backup files and pfile and password files to target side. i.e. on 11g server side
    Target side:
    Set proper parameters for 11g
    SQL>startup nomount;
    RMAN>connect target
    RMAN>set dbid=<source database id>
    RMAN>catalog start with '<rman backup file location';
    RMAN>restore controlfile;
    RMAN>run
    set newname for datafile 1 to '<target datafiles location with file name';
    restore database;
    switch datafile all;
    finished
    upto now it's success full when i am trying to recover
    RMAN>recover database;
    it is saying
    rman 00571
    rman 00569
    rman 00571
    rman 03002
    ora - 19698
    can you please suggest the solution for this.
    thanks a lot.

    I'm not sure what you're doing is supported.
    You are taking a 10g database and restore and recover it using 11g software.
    I think you are allowed to do that with 10g software only.

  • Problem creating physical Standby database with RMAN

    Hi All
    I am trying to learn oracle dataguard and as part of the process learning creating standby database.
    Platform : Sun-Fire-V250 Sparc, Solaris 10
    Database Version - Oracle 11R2
    I am creating standby database on same server, so directory structure is different.
    Following the instructions on Oracle site I managed to create a functional physical standby database. But I am not able to create standby database using RMAN. These are the steps that I followed-
    1.Set up all necessary parameters on primary database as done while creating physical standby database manually, eg setting force logging, creating standby logs etc.
    2.Edited parameter file on primary database as done while creating manual pysical standby database creation. Some of the changes done are-
    On Primary Database:
    *.FAL_CLIENT='orcl11020' #Primary database unique name
    *.FAL_SERVER='stdby_11' #Standby database unique name
    db_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020'
    log_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11/redo_mem','/<dir>/oradata/orcl11020/redo_mem'
    standby_file_management=auto
    *.log_archive_config='DG_CONFIG=(orcl11020,stdby_11)'
    *.log_archive_dest_1='LOCATION=/<dir>/flash_recovery_area/ORCL11020/archivelog
    VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orcl11020'
    *.log_archive_dest_2='SERVICE=stdby_11 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stdby_11'
    *.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
    *.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
    *.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
    *.LOG_ARCHIVE_MAX_PROCESSES=30
    Copied same pfile for standby database and modified following-
    *.control_files='/<dir>/oradata/stdby_11/stdby_11.ctl','/<dir>/fra_stdby/stdby_11/stdby_11.ctl'
    *.db_name='orcl1102'
    *.db_unique_name='stdby_11'
    *.FAL_CLIENT='stdby_11'
    *.FAL_SERVER='orcl11020'
    db_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11'
    log_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020/redo_mem','/<dir>/oradata/stdby_11/redo_mem'
    standby_file_management=auto
    *.log_archive_dest_1='LOCATION=/<dir>/fra_stdby/STDBY_11/archivelog
    VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=stdby_11'
    *.log_archive_dest_2='SERVICE=orcl11020 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
    db_unique_name=orcl11020'
    3. Add relevant information in tnsnames.ora and listener.ora files and then restart listener.
    3. Created password file with same credential as primary database.
    4.Up-to-date RMAN backup of primary database available.
    5.Create standby controlfile with rman
    While primary database s open (I tried with primary database in mount mode as well)-
    $>rman catalog rman/paswd@rman target /
    RMAN> BACKUP CURRENT CONTROLFILE FOR STANDBY;
    6. Open a new terminal and startup standby database in nomount mode using parameter file created -
    $>ORACLE_SID=stdby_11
    $>export ORACLE_SID
    $>sqlplus / as sysdba
    SQL>STARTUP NOMOUNT pfile='<location/initfilename.ora'
    SQL>quit
    $> rman AUXILIARY / target sys/passwd@orcl11020 catalog rman/passwd@rman
    RMAN>DUPLICATE TARGET DATABASE FOR STANDBY DORECOVER;
    RMAN finishes without error but archive logs are not being tranported. Looking at the log, following caught my eye-
    Error 1017 received logging on to the standby
    Check that the primary and standby are using a password file
    and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
    and that the SYS password is same in the password files.
    returning error ORA-16191
    FAL[client, ARC2]: Error 16191 connecting to orcl11020 for fetching gap sequence
    Errors in file /<>dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
    ORA-16191: Primary log shipping client not logged on standby
    Errors in file /<dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
    ORA-16191: Primary log shipping client not logged on standby
    So on both primary and standby I confirmed
    SQL> show parameter remote_login_passwordfile
    NAME TYPE VALUE
    remote_login_passwordfile string EXCLUSIVE
    To make double sure that password files are same, I shutdown both databases, delete password files and recreated with same credentials.
    Password files are called - orapworcl11020 and orapwstdby_11
    Can someone guide me where thisngs are going wrong here please.

    Not sure if I understood it clearly.
    SELECT * FROM V$ARCHIVE_GAP;
    returns no rows so there is no gap.
    But could you please explain me the result of the previous query. To catch up again, on standby when I check
    SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG
    SEQUENCE# APPLIED
    75 NO
    74 NO
    76 NO
    77 NO
    I understand that though archive files have been copied across but they are not applied yet.
    On primary when I give your query -
    SELECT name as STANDBY,SEQUENCE#,applied, completion_time
    2 FROM v$archived_log
    3 where dest_id=2
    4 and sequence# BETWEEN 74 and 80;
    I get -
    STANDBY SEQUENCE# APPLIED COMPLETIO
    stdby_11 74 YES 28-JUN-11
    stdby_11 75 YES 28-JUN-11
    stdby_11 76 YES 29-JUN-11
    stdby_11 77 YES 29-JUN-11
    stdby_11 78 YES 29-JUN-11
    stdby_11 79 YES 29-JUN-11
    stdby_11 80 YES 29-JUN-11
    stdby_11 75 NO 07-JUL-11
    stdby_11 74 NO 07-JUL-11
    stdby_11 76 NO 07-JUL-11
    stdby_11 77 NO 07-JUL-11
    stdby_11 78 NO 07-JUL-11
    I have intentionally given
    sequence# BETWEEN 74 and 80
    because I know in the current incarnaion of the database, max sequence is 78.
    So my understanding is, the rows between 28-29 June are from previous incarnation, correct me if I am wrong
    Archive files of the current incarnation, since I successfully created standby database are shipped but yet to be applied - am I right?
    Then my final question is, when will these archives be applied to standby database?
    I am sorry to ask too many questions but I am just trying to understand how it all works.
    Thanks for your help again

  • ADMT 3.2 Migrate users to the same organizational unit in the Target Domain as they are in the Source Domain?

    Hi,
    I am in the middle of a inter forest migration and have created the target domain (TargetDomain.local) 2008R2 and Source Domain (SourceDomain.Local) 2008R2 with a two way trust. I have installed ADMT 3.2 on a server in the Target Domain. I am able to migrate
    users form the source domain to the target domain. I have copied the OU Structure from the source domain to the target domain. The issue I am currently facing is that I would like to find a way to migrate all users from the source domain to the target domain
    and the users migrate to the same OU as the source. I have looked at the include file option but cannot find a way of specifying the source and target OU's.
    Please could someone help me with this, Thanks.

    Hi,
    You need to create the same OU on target domain, then do the user account migration.
    On Organizational Unit Selection page, select Browse and select target OU, then click OK.
    For the more and detail information, please refer to this article:
    http://social.technet.microsoft.com/wiki/contents/articles/16621.interforest-migration-with-admt-3-2-part-3.aspx#Group_Account_Migration
    Regards.
    Vivian Wang

  • Oracle 3113 creating a standby with rman

    Hello,
    environment is 11gR2 on Linux.
    Tested on CentOS 5.5 as OS and local LAN as interconnect and the duplicate command terminates successfully in some minutes.
    Same script but using oel 5.5 and a wan (3Mbit/s) and I keep getting 3113 errors after about 2h or 3h.
    I suspect some timeout on wan (that is over vpn) but I would also like to trace something at my side.
    I run a shell script with nohup and send it to background and this is the log, from which you can see the rman script:
    Recovery Manager: Release 11.2.0.1.0 - Production on Tue Sep 7 14:50:11 2010
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    RMAN>
    connected to target database: TESDB1 (DBID=11492743)
    RMAN>
    connected to auxiliary database: DUMMY (not mounted)
    RMAN>
    RMAN> run{
    2> allocate channel prmy1 type disk;
    3> allocate auxiliary channel stby1 type disk;
    4> duplicate target database for standby from active database
    5> spfile
    6> parameter_value_convert 'TESDB1','TESDB1DR'
    7> set db_file_name_convert='/TESDB1/','/TESDB1DR/'
    8> set log_file_name_convert='/TESDB1/','/TESDB1DR/'
    9> set 'db_unique_name'='TESDB1DR'
    10> set control_files='/app/oradata/TESDB1DR/control01.ctl','/app/oradata/flash_recovery_area/TESDB1DR/control02.ctl'
    11> set db_recovery_file_dest='/app/oradata/flash_recovery_area'
    12> set DB_RECOVERY_FILE_DEST_SIZE='4977M'
    13> nofilenamecheck;
    14> }
    using target database control file instead of recovery catalog
    allocated channel: prmy1
    channel prmy1: SID=12 device type=DISK
    allocated channel: stby1
    channel stby1: SID=135 device type=DISK
    Starting Duplicate Db at 07-SEP-10
    executing Memory Script
    executing command: SET NEWNAME
    renamed tempfile 1 to /app/oradata/TESDB1DR/temp01.dbf in control file
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    Starting backup at 07-SEP-10
    channel prmy1: starting datafile copy
    input datafile file number=00003 name=/app/oradata/TESDB1/undotbs01.dbf
    .. after about three hours (and 3.2Gb transferred) it continues with:
    RMAN-03009: failure of backup command on prmy1 channel at 09/07/2010 17:53:49
    RMAN-06136: ORACLE error from auxiliary database: ORA-03113: end-of-file on communication channel
    Process ID: 3187
    Session ID: 192 Serial number: 3
    continuing other job steps, job failed will not be re-run
    .. after 15 minutes:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 09/07/2010 18:09:35
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of backup command on clone_default channel at 09/07/2010 18:09:34
    RMAN-10038: database session for channel clone_default terminated unexpectedly
    RMAN> **end-of-file**
    RMAN>
    Recovery Manager complete.
    the undo tbs is 3.2 Gb so I'm not sure if the 3113 happens at the end of copy... but the tablespace doesn't succeed
    and the other jobs don't start even if it says "continuing other job steps"..
    rman started at 14:50 and in listener at dr site I have:
    Tue Sep 07 14:50:55 2010
    07-SEP-2010 14:50:55 * service_update * TESDB1DR * 0
    07-SEP-2010 14:50:55 * (CONNECT_DATA=(SERVICE_NAME=TESDB1DR)(CID=(PROGRAM=oracle)(HOST=lb-orajde.boiron.ntm)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.49.1.93)(PORT=35240)) * establish * TESDB1DR * 0
    Tue Sep 07 15:00:58 2010
    07-SEP-2010 15:00:58 * service_update * TESDB1DR * 0
    Tue Sep 07 16:35:04 2010
    07-SEP-2010 16:35:04 * service_update * TESDB1DR * 0
    Tue Sep 07 17:02:04 2010
    07-SEP-2010 17:02:04 * service_update * TESDB1DR * 0
    07-SEP-2010 17:02:10 * service_update * TESDB1DR * 0
    Tue Sep 07 17:53:17 2010
    07-SEP-2010 17:53:17 * service_update * TESDB1DR * 0
    Tue Sep 07 18:09:00 2010
    07-SEP-2010 18:09:00 * (CONNECT_DATA=(SERVICE_NAME=TESDB1DR)(CID=(PROGRAM=rman)(HOST=lb-orajde.boiron.ntm)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.49.1.93)(PORT=32610)) * establish * TESDB1DR * 0
    In alert.log at dr site I have at 17:02 (about 50 minutes before error):
    Tue Sep 07 15:05:01 2010
    db_recovery_file_dest_size of 4977 MB is 0.00% used. This is a
    user-specified limit on the amount of space that will be used by this
    database for recovery-related files, and does not reflect the amount of
    space available in the underlying filesystem or ASM diskgroup.
    Tue Sep 07 17:02:03 2010
    Fatal NI connect error 12170.
    VERSION INFORMATION:
    TNS for Linux: Version 11.2.0.1.0 - Production
    Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
    TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
    Time: 07-SEP-2010 17:02:03
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12535
    TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
    TNS-00505: Operation timed out
    nt secondary err code: 110
    nt OS err code: 0
    Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.49.1.93)(PORT=35226))
    some times (always at 17:02) and nothing more
    In alert.log at primary site:
    Tue Sep 07 14:50:36 2010
    Clearing standby activation ID 11529351 (0xafec87)
    The primary database controlfile was created using the
    'MAXLOGFILES 16' clause.
    There is space for up to 13 standby redo logfiles
    Use the following SQL commands on the standby database to create
    standby redo logfiles that match the primary database:
    ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 52428800;
    ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 52428800;
    ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 52428800;
    ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 52428800;
    Tue Sep 07 16:00:40 2010
    Thread 1 advanced to log sequence 759 (LGWR switch)
    Current log# 3 seq# 759 mem# 0: /app/oradata/TESDB1/redo03.log
    Tue Sep 07 16:00:41 2010
    Archived Log entry 528 added for thread 1 sequence 758 ID 0xafec87 dest 1:
    In sqlnet.log of primary site:
    Tue Sep 07 17:53:49 2010
    Fatal NI connect error 12170.
    VERSION INFORMATION:
    TNS for Linux: Version 11.2.0.1.0 - Production
    TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
    Time: 07-SEP-2010 17:53:49
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12535
    TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
    TNS-00505: Operation timed out
    nt secondary err code: 110
    nt OS err code: 0
    Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.12.41)(PORT=1521))
    and the same at 18:09
    No other errors.
    Any hints?
    BTW: what is the minimum size of undo tbs? Can I have compression enabled also during duplication if transport service is configured with COMPRESSION=ENABLED, or does it count only when copying redo files?
    Thanks in advance,
    Gianluca

    Thanks for your reply.
    I will try your suggestion as it could come useful some time.
    So with this alternate method at the end I would have standby aligned as of backup time, correct?
    And after running something like this on standby:
    SQL> alter database recover managed standby database disconnect from session;
    It will begin to receive, archive and apply redo logs, correct?
    Some answers regarding the original question. It was confirmed that there was a 2hours cut-off time at firewall level.
    The first datafile that the rman session began to copy was 3.2Gb in size, taking more than 2 hours completing.
    Monitoring with netstat on source and target I saw this at source during the duplicate process:
    tcp 0 0 10.49.1.93:46626 192.168.12.41:1521 ESTABLISHED
    tcp 0 0 10.49.1.93:46627 192.168.12.41:1521 ESTABLISHED
    tcp 0 0 10.49.1.93:46629 192.168.12.41:1521 ESTABLISHED
    tcp 0 369240 10.49.1.93:50371 192.168.12.41:1521 ESTABLISHED
    and the session bound to port 50371 was the only one pushing data (send queue not empty).
    The other 3 ones I presume are for control of rman session. I get 3 sessions even if I open only one channel on primary side.
    After the first datafile completes copy, a new session (with port 14871) is established substituting the other one.
    The three initial ones instead remain for all the duplicate process.
    tcp 0 487872 10.49.1.93:14871 192.168.12.41:1521 ESTABLISHED
    tcp 0 0 10.49.1.93:46626 192.168.12.41:1521 ESTABLISHED
    tcp 0 0 10.49.1.93:46627 192.168.12.41:1521 ESTABLISHED
    tcp 0 0 10.49.1.93:46629 192.168.12.41:1521 ESTABLISHED
    So after the copy of the first file, the session come back to one or more of the initial 3 ones, and they probably make a push-ack, got a 3113 as the firewall has silently cut them after 2 hours.... and the datafile, even if completed, is not marked as completed. A new run would copy again it...
    Now the time has been put to 8hours, with 24hours being the maximum value set (no disable possible as far as the network guy said...).
    And the duplicate completed correctly.
    Would I have to fear any problems with this cut-off due to "normal" dataguard operations or not, in your opinion?
    Thanks
    Gianluca

  • Duplicating DB with RMAN,DB mode:NOARCHIVE LOG?

    Hello,
    I want to get a duplicate database on a remote server machine with same file structure by using internet of VPN(virtual private network). My question is ...
    can we duplicate the database to remote server if the Database is in NOARCHIVELOG MODE ??
    I have surffed on net for the same i got the method to duplicated the database but not sure weather i can do that in noarchivelog mode !
    Regarding the steps if anyone has some better ideas to perform duplication of Database with RMAN or any other tool let me know or any more optimized steps ....will be appreciated. But please keep this point that the database is in norachivelog mode.
    ORACLE 10g R2
    Windows server 2003 32bit
    Thanks in advance....
    Regards,
    DBA4

    If the database is in noarchivelog mode, then you can only take offline backup of database through RMAN in the mount state. Previously database shouldn't be shutdown
    abnormally.
    SQL> select LOG_MODE from v$database;
    LOG_MODE
    NOARCHIVELOG
    1 row selected.
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup mount;
    ORACLE instance started.
    Total System Global Area  209715200 bytes
    Fixed Size                  1289748 bytes
    Variable Size             138412524 bytes
    Database Buffers           67108864 bytes
    Redo Buffers                2904064 bytes
    Database mounted.
    SQL> exit
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
    With the Partitioning, Oracle Label Security, OLAP and Data Mining options
    D:\Test>rman target /
    Recovery Manager: Release 10.2.0.3.0 - Production on Mer. Mai 30 19:46:13 2007
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    connected to target database: MIKA (DBID=1492747861, not open)
    RMAN> backup database;Now move that backup to another machine, and restore this backup.
    On the target machine, do the following steps:
    D:\Test>rman target /
    rman>RUN
    STARTUP NOMOUNT FORCE;
    allocate channel d1 type disk;
    RESTORE SPFILE;
    SHUTDOWN IMMEDIATE;
    STARTUP NOMOUNT;
    RESTORE CONTROLFILE;
    ALTER DATABASE MOUNT;
    RESTORE DATABASE;
    ALTER DATABASE OPEN RESETLOGS;
    regardsregards

  • I am unable to manually add artwork via itunes 12 on windows 7. I've tried all the suggestions to no avail. Has anyone succeeeded on the same platform as me?

    i am unable to manually add artwork via itunes 12 on windows 7. I've tried all the suggestions to no avail. Has anyone succeeded on the same platform as me?

    The new iTunes 12 Get Info dialog lacks right-click context menus (at least for now) but it still accepts most standard keyboard shortcuts and drag & drop actions.
    Delete Artwork
    On the artwork tab of Get Into, tap the image in question, use Backspace or Ctrl+X. Delete doesn't work.
    Or, tap the image at the top left of Get Info, this time use Backspace or Delete, it is Ctrl+X that doesn't work.
    Add Artwork
    Select artwork, press Ctrl+C to copy, tap the centre of the Artwork tab, press Ctrl+V to paste.
    Or, select artwork, press Ctrl+C to copy, tap the small image area at the top left, press Ctrl+V to paste.
    Or, you can drag & drop to, or sometimes from, the same locations.
    You can also copy artwork from the Get Info dialog to Windows Explorer with the keyboard shortcuts.
    If the source image is on a web page right-click and use Copy Image rather than copy. (With Chrome I get a one pixel wraparound so tend to go for a temporary local copy anyway - not sure whose bug this is, but it isn't new.)
    If you have multiple images embedded drag the one you want to be the primary artwork to the leftmost position.
    Replace/Remove All Artwork
    The top left image box can be used to add or delete art from multiple tracks. In either case all existing artwork in all tracks is replaced/removed.
    Old Style Get Info Dialog
    Select some items, right-click, hold down shift, then click Get Info from the context menu. (Use alt/option on a Mac)
    If you still cannot add artwork via any of these methods then I would suspect a permissions problem. See Repair security permissions for iTunes for Windows.
    tt2

  • Recover with RMAN

    Hi Experts,
    I have a question
    i have a backup strategy with rman that create a data file copy and some backupset for other next days
    i can restore and recover my database until last exist ARCHIVE LOG without any problem.
    now i want to know how can i recover database again until last transaction in redo log if i had db redo log file???
    can rman recover from redo log until last transaction register in redolog??
    if yes how can i do this?
    Thanks
    Best Regards

    Hi,
    1) I think with 3 kind of backup file i have my DB until last transaction that save in online redolog file. is it true?
    suppose that we restore database from full backup.
    so we have a DB from time full backup time without transactions in archivelogs and redolog file.
    now we want recover database until last transaction.we can use two command for this goal:
    a. RECOVER DATABASE UNTIL SEQUENCE [last archivelog sequence# + 1];
    this command complete successfully and we can open database with resetlogs. but data is until last archive log so u don't have transaction in redolog file.
    b. RECOVER DATABASE;
    this command always complete with error that says sequence number [last archivelog sequence# + 1 ] not found.
    so we found out that this command only see archivelogs, not archivelogs and redolog files.
    and i don't know if we can open this database with resetlogs option.
    As mentioned by before poster, the redolog files are not backed up and there is needless to take a backup of the redolog and transfer it to the new server. n
    2) please tell me how can i introduce redologs to rman?  should i copy them in the same address with their address in control file??
    In the RMAN command you must archive the current redolog  file before backing up the archivelogs, which will ensure you will have a upto date  backup. Let me share one of my coding:
    RUN
    ALLOCATE CHANNEL RMAN_BACK_CH01 TYPE DISK;
    ALLOCATE CHANNEL RMAN_BACK_CH02 TYPE DISK;
    ALLOCATE CHANNEL RMAN_BACK_CH03 TYPE DISK;
    BACKUP
    AS BACKUPSET
    TAG 'FULL_DATABASE'
    FORMAT '/u01/backup/DBFILES_%F’;
    DATABASE
    SQL 'ALTER SYSTEM SWITCH LOGFILE';
    SQL 'ALTER SYSTEM ARCHIVE LOG CURRENT';
    RUN
    BACKUP
    AS BACKUPSET
    TAG 'ARCHIVELOGS_ALL'
    FORMAT '/u01/backup/ARCHIVELOGS_%F’
    DELETE INPUT;
    ARCHIVELOG ALL
    Hope this helps!
    Thanks &
    Best Regards,

  • OS/DB Migration with migmon and ftpmethod : Gaps in ftp transfer

    Hello,
    we are performing an OS/DB Migration with migmon and the ftp method.
    WAN Connection between Source and Target System.
    We are observing gaps in transfer. Export continues, but there is not disturbance on the line.
    We are thinking about transferring the export files manually via ftp instead of using the build-in ftp.
    Has anybody the same experience?
    KR Joerg

    Hi Markus,
    there are no errors in, but there are gaps...
    like:
    INFO: 2010-03-07 07:01:55
    New max number of parallel export jobs 4 is used instead of previous 2 for package group 'MEDIUM SIZE FILES'.
    INFO: 2010-03-07 08:01:04 com.sap.inst.migmon.LoadTask run
    Unloading of '_BEV2_EDMSE' export package is successfully completed.
    => and between 7 + 8 there is nothing transferred to the target system.
    Cheers
    Jörg

  • I get a message saying safari cannot open a page because "too many redirects have occurred". These pages open perfectly well in a rival browser. What is wrong with Safari? My platform is iPad

    I get a message saying safari cannot open a page because "too many redirects have occurred". These pages open perfectly well in a rival browser. What is wrong with Safari? My platform is iPad
    John E Staton

    hey, i got the same problem before but maybe this solve the problem to you. (on ipad)
    1. go to setting and tap "general"
    2. in privacy section see "accept cookies" and select "from visited"
    some website manage their domain with cookies, a lot of them.  and is more frequently on marketing web sites,  like banks, shopping, etc...
    be sure to select "fraud warning" always. is up to you to accept cookies or not. affortunatly, u can always turn off and on.
    madboypr.

  • RMAN in window platform?

    Dear all,
    I found rman.exe in "c:\oracle\ora92\bin" and I just double click on this... and see following:
    RMAN>
    I have try to type "RMAN TARGET /" but it doesn't work. How can I connect to DB using RMAN?
    FAN

    Run it from the command line.
    Ensure that ORACLE_HOME, PATH and ORACLE_SID are set in the environment.
    For RMAN Backups on Windows, I would write a BATch file that does
    a. setup the environment parameters
    b. starts RMAN with "RMAN TARGET internal/manager nocatalog @rman_backup.rmn"
    and have my RMAN Backup script in "rman_backup.rmn" in the same directory

  • Creating a Data Guard Database with RMAN in 10&11g

    I found this notes for 9i, looking for same for 10g & 11g
    183570.1 Creating a Data Guard Database with RMAN (Recovery Manager) using Duplicate Command

    These notes just show duplicating dbs without datagurd, i am looking for Creating a Data Guard DB with RMAN in 10 &11g.

  • How to upload data from  flat to ztables with in the same client by idocs

    Hi Experts,
                   I have a requirement in IDOCS, I need to create a custom IDOC .I  am working on IDES 4.6c. The reqirement is , there  are ztables with header and item data. say for example Authors and Books. I need to upload data from flat file which is available in presentation  server of the same client, which will updated in ztables by using idocs.  For this i need to do ale settings also. The client is 800. There is no other client available. With in the same client i need to do the above stuff.
                    For this requirement how to approach (step by step) to accomplish.
    Thanks in Advance.
    Regards
    J.S.Varma

    Hi,
      This is the procedure.
    create segments using we31. <b>don't forget to relaese it</b>
    create idoc using above segments using we30 <b>don't forget to relaese it</b>
    create message type using we81
    create function module to upload data using se37
    maintain process code using we42
    create  partner profiles we20.
    In the fm module itself write the code for downloading the data from presentation server by GUI_DOWNLOAD.
      Then update the database tables directly by insrt through other internal table in the same client itself.
    Thanks
    Manju

  • I have a MacBook Pro 15.4" 2.53GHz Core 2 Duo (A1286) - Mid 2009 MC118LL/A and I think the MATSHITA DVD-R   UJ-868 is going out. Should I replace it with the exact same drive or is there a better one that is compatible?

    I have a MacBook Pro 15.4" 2.53GHz Core 2 Duo (A1286) - Mid 2009 MC118LL/A and I think the MATSHITA DVD-R   UJ-868 is going out. Should I replace it with the exact same drive or is there a better one that is compatible?

    I went to my local Apple store last weekend with a similar issue on my 2007 C2D MBP and they quoted me a price of around £60 (excluding VAT) to replace the optical drive. That's about the same price as the external optical drive a bought for my RMBP.
    Alternatively you could just buy a 3rd party external drive if you want to save cash but note that the external Apple superdrive is not compatible with MacBooks with built in optical drives.

  • Got error while recover controlfile with rman

    Dear all,
    My controlfile and some datafiles were crash and i tried to recover their with rman as the following step:
    1. startup nomount;
    2. restore controlfile from autobackup;
    3. alter database mount;
    4. restore database;
    5.SELECT archivelog_change#-1 FROM v$database;
    ARCHIVELOG_CHANGE#-1
    1301671
    6.run {
    set until scn 1301671;
    recover database;
    executing command: SET until clause
    Starting recover at 01 พ.ย. 2006
    using channel ORA_DISK_1
    starting media recovery
    media recovery failed
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of recover command at 11/01/2006 15:38:01
    ORA-00283: recovery session canceled due to errors
    RMAN-11003: failure during parse/execution of SQL statement: alter database reco
    ver if needed
    start until change 1301671 using backup controlfile
    ORA-00283: recovery session canceled due to errors
    ORA-01190: controlfile or data file 1 is from before the last RESETLOGS
    ORA-01110: data file 1: 'C:\ORACLE\ORADATA\DB01\SYSTEM01.DBF'
    What happend? Please give me some advise.
    Thaks for advance !
    Chara

    After every resetlogs you have to take fresh backup.
    It seems you have opened your database in resetlogs and your backup is prior to this resetlogs.So the controlfile is showing inconsistance with the other datafiles.

Maybe you are looking for