MII 12.1 and NW CE 7.1 on Windows 2008

Hi ,
   I just need to find out if any one has installed MII 12.1 and NW CE 7.1
    on Windows 2008 R2 and/or Windows 2008 on 64 bit.
   Looking at the PAM for NW CE 7.1, it has both the 2008 versions listed but i'm not sure if I'm reading it correct
   that it is supported or not.
   And has anyone had any issues on these two systems. Otherwise is there a SAP Note somewhere which details this
Thanks

Hi Fstoian,
Thanks for information.
I want to install MII 12.1 on windows 2008 R2 SQL 2008 R2. I think it is supported as ustated in the last post. Please confirm.
one more thing i would like to clarify.
As per SAP note 1229080, its mentioned that navigation path for downloading NW CE 7.1 EHP1 is wrong in installation guide.
correct path for downloading NW CE 7.1 EHP1 is :-
hhttp://service.sap.com/swdc -> Installations and Upgrades -> A - Z Index-> N -> SAP NETWEAVER CE-> SAP NETWEAVER CE 7.2 -> Installation -> Platform(Phys. Delivery) -> <operating system> -> <database>
Here you can see its saying to download from path of 7.2
could you please through some information on this that i can install MII 12.1 on NWCE 7.2 using SQL / WINDOWS 2008 R2.
Regards,
Abuzar.

Similar Messages

LMS 2.6 and ACS 4.2 compatible with Windows 2008 R2 Active Directory?

Hi,
We are planning to upgrade CORP Domain from Windows 2003 Active Directory Schema to Windows 2008 R2 Active Directory Schema.
I wanted to know if the following applications which are installed on windows (domain member servers) are compatible with windows 2008 server R2 schema?
CiscoWorks LAN Management Solution 2.6
Cisco Secure Access Control System 4.2
Cisco Fabric Manager 1.5
Any help is much appreciated!

- CiscoWorks LAN Management Solution 2.6 - Not supported and this software is EOS-EOL.
www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_end-of-life_notice0900aecd80532c07.html
- Cisco Secure Access Control System 4.2 - Not supported either:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/windows/install.html#wp1041324
- Cisco Fabric Manager 1.5 - Was not able to find anything for version 1.5 and not really familiar with this product. However, according to the below not even version 4.2(7d) supports 2008:
www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/fm/release/notes/20325_10.html#wp657668

Install and uninstall of Oracle 11g R2 on Windows 2008 Server

Hi,
I installed Oracle 11g R2 and set up a database on Windows 2008 Server following the steps in the Installation Guide and it was successful. After uninstalling the product and doing a re-install, the step to configure the Net Configuration Assistant fails with the following msg.
Failed to allocate port(s) in the specified range(s) for the following process(es): JMS
[5540-5559], RMI [5520-5539], Database Control [5500-5519], EM Agent [3938] | [1830-1849]
Also, when I ran "netca.bat" and tried to reconfigure the Listener, it indicated the default port 1521 is being used. I ran "netstat -an" and do not see the port listed.
Questions:
What is the best way to check if something was leftover from my previous install of Oracle that is using the default ports?
What do I need to do to ensure a re-install is successful?
Uninstalling Oracle -
1.     Log in as the Administrator.
2.     Stop all Oracle Services.
3.     From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4.     Delete the C:\app\oracle directory.
5.     Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

Johan, after I uninstalled Oracle, I checked to ensure there were no remaining Oracle services remaining.
Srini, below are the steps I followed to uninstall Oracle. In step 3, I just ran deinstall.bat without any parameters and provided required information as prompted. Note, I uninstalled using the Administrator user and not the "oracle" account that I used to install Oracle.
Uninstalling Oracle -
1. Log in as the Administrator.
2. Stop all Oracle Services.
3. From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4. Delete the C:\app\oracle directory.
5. Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

MII 11.5 and sharepoint

Has anyone ever had MII 11.5 running on the same server as Windows SharePoint services ?
I installed MII 11.5 on the same server that is running Wonderware's latest Information Server software and the Wonderware software uses Sharepoint and Microsoft Reporting Services. I can't seem to get MII to run.
Anyone have any ideas?

I havenu2019t messed with Sharepoint and MII coexisting on the same server, but itu2019s quite possible that there is an ISAPI filter hooked into IIS for Sharepoint and this conflicts with the ServletExec filter. You may need to have them running on different ports, not just everything on default port 80.
By default in 11.5 ServletExec runs on port 8888 and in conjunction with the default website which by default is 80.

MII 12.1 and PCo 2.1.5.1

Hi guys,
Hopefully this will be easy points for someone. I am trying, for the first time, to connect our MII 12.1 to a newly install PCo 2.1.5.1.
I also have a Phoenix Contact OPC DA server installed on the PCo server and (I think) I have PCo configured to see the Phoenix server.
All I am trying to do now is configure MII to be able to do a TAG query through PCo. I tried creating a UDC Data Server (no PCo option was available). I used the PCo server's IP address and, at this point, I have tried a variety of ports (not sure how to tell which is correct).
Can someone please point me in the right direction or point me toward some documentation that might be helpful?
Note that we have successfully been using MII 11.5 talking to UDS and a Phoenix OPC server. We are trying to get the same kind of thing working with MII 12.1 and PCo.
Thank you!
-Mike

Using the same 11.5 UDC data server configuration in your 12.1 system should also work (12.1 tag query pointing to the already running UDS).
Swapping the data server port and IP address (or just port if they are on the same server) should allow you to toggle your 12.1 application tests between the UDS serviing up the OPC data as compared to PCO.

When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of it.

When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of this message. When I login to my husband's account, this message does not appear.

Hey sunnyday7!
Here is an article that can help you address this issue:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
Additional Information
OS X automatically relaunches the Finder when it is quit. If the Finder is unresponsive, use Force Quit to relaunch it. Select Finder in the Force Quit Window or Dock, then click Relaunch.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Windows 2008 Server and Windows 8 clients

Hey Guys,
I have had this problem for sometime now and really need a solution. I have Windows 2008 Enterprise Server running about 200+ terminal services clients. All Windows XP clients are fine, Windows 7 clients have issues when they get an updated version of
remote desktop client(to solve the issue we simply rollback the update), Windows 8 clients cannot connect and use out remote app. The issue stems from the newer version of remote desktop client (on windows 7 and embedded in windows 8) cannot connect to our
terminal server and generates an error and immediately disconnects. The error says "
Your computer can't connect to the remote computer because an error occurred on the remote computer that you want
to connect to
So my questions are, how can i update my Windows 2008 Terminal server version to support these clients, or do u have migrate to Windows 2012? Or is there a solution to my current problem which will allow my client to connect and use the remoteapps?

Hi,
Thank you for posting in Windows Server Forum.
Please follow the below steps and verify result.
LAN manager authentication level settings (Local security policy->Local Policies->Security Options->Network Security: LAN Manager Authentication level).
Try to change it to "Send NTLMv2 response only"
Snap:
If still face the issue please install this Hotfix.
RDS client computer cannot connect to the RDS server by using a remote desktop connection in Windows
http://support.microsoft.com/kb/2752618/
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Is there a separate download for iMac. I bought and downloaded what I thought was the right download but it is not working and feel it might be a windows version. How doe I get it right

s there a separate download for iMac. I bought and downloaded what I thought was the right download but not working and feel it might be a windows version. How doe I get it right

Check the link below for requirements and instructions for upgrading to Snow Leopard (10.6)
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

I tried to open a bookmark and it opened in an active window as a frame, not a separate tab or window. What's going on?

I've been having problems with Firefox hanging (seems related to Flash on a particular website). Through hours of troubleshooting yesterday, including on the phone with my ISP's help desk, it was recommended I "refresh" Firefox. I've done that before, and I did it yesterday again. This morning I opened Firefox to my home page (my ISP's portal), checked my email, logged out of email, closed that tab, opened two other forums and Photobucket--three tabs open in the window--to post photos and contribute to discussions in both forums. When done, I logged out of both forums and Photobucket, closed each tab separately, then quit Firefox. (While in Photobucket, Flash crashed several times....but that's not unusual with Photobucket in my experience. It's a different problem I am still dealing with....but forget it right now....) As part of yesterday's "refresh", I set Firefox to empty the cache and cookies and other files upon quitting.
Later in the day today, I opened Firefox, my ISP's portal opened as usual and expected (my "Home page"). Sometimes, rather than close that window/tab, I just open a bookmark and it opens in that same window, but replacing the previous window and its contents. That is normal operating procedure for me. You know, rather than having two windows open where I'll have to close the first one, I just have the bookmark open in place of the original window/contents.
Today (and it's happened before today, but only infrequently), the bookmarked page opened as if it was a frame in the active window....that is, my ISP's portal occupies about 3/4 of the window, but over on the left side of the window (not another tab or window, but in the very same window) is a slender partial view of the bookmarked page. This new web page--totally unrelated to the original page--has a scroll bar at the bottom, but can't be made to fill the window....the previously opened web page acts as a barrier to seeing the "new" frame/web page. While I can grab the right border of this "new frame" and drag it to the right, it still can't push the "old" original web page out of the way....the old page reaches some minimum limit and I get a split screen view of two entirely different web sites contained in exactly the same active window.
The "new" frame has an "x" in the upper right corner, so I could close it.....but my question is, why did it open in a completely different company's web page/window....how can two web pages from completely different organizations/companies/websites occupy the same active window in Firefox? I have screenshots.....attached. And, oh yes, besides the HOW and WHY of it, how can it be prevented (or is the best thing to just right click and open it in a new tab or window.....??????) That still doesn't satisfy me....I'm someone who needs to know WHY something happened that should not have happened. It makes me crazy when something strange happens and the "solution" is to change MY behavior. (You know, like if YOU were the problem, but I have to change MY behavior instead of fix what's wrong with YOU.....when fixing YOU might render the entire situation obsolete.)
Thanks for whatever you can suss out.....

You do not have the properties in the Bookmarks Manager (Library), but you should have it if you right-click a bookmark the Bookmarks Toolbar or in the bookmarks sidebar.
On Mac you probably do not have it if you right-click an item in the Bookmarks menu (this menu is under control of the Mac OS), but I assume that this should work if you click the "Show your bookmarks" button on the Navigation Toolbar that is next to the star to bookmark the current tab and right-click an item in the bookmarks list that opens.

I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it.

I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it. Adobe no longer supports activation. Is there a way I can keep using CS2? I need to get files back and forth to my coauthor. I also have CS6. I understand that files can go form 2 to 6, but not backwards. Thanks Robert

you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads

Mail 6.3 will not close and won't open an interactive window

A day or so ago I tried deleting about 4 messages off mail and then shut the app. A note came up and stated the messages could not be sent to the delete folder and then proceeded to close the window but the application remained as opened. I tried to quit the app from the dock but it wouldn't close it. I then tried shutting the system down and mail stopped it from closing. I have a Mac Book Pro with Mountain Lion 10.8.3 and tried to let the battery drain to let shut down that way to no avail. I've tried opening another window in Mail but it won't open a functional window (preview screen will not display highlighted message). How do I force a close or bring mail back to use it properly?

Mac OS X: How to quit an unresponsive application using Force Quit

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

Redirect Printer is not working in windows 2008 R2 Server( Server Running as AD and Terminal Service(both role in single server))

Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686

Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy

I did the iTunes update and now I am getting a Windows error 126 message.

I did the iTunes update and now I am getting a Windows error 126 message. Now I can't use iTunes at all. Any ideas?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99606)

How to Block Themes, Wallpapers and other Display Customizations (DPI, Scaling, Window Color and Appearance) with USMT 5.0?

I'm doing something wrong, but I can't figure out what.
I've read some great write ups on the subject:
USMT Custom XML the Free and Easy Way
USMT
4.0 Custom Sample - Blocking Wallpaper and Theme Migration from Windows Vista and Windows 7
Blocking
Wallpaper Migration with USMT (or: you are a jerk)
and used part of the XML in their example, but the wallpaper, themes and other display customizations are still coming over. Now I'm trying to use MigXmlHelper.DestinationPriority() but really its just my last ditch effort.
From an elevated command prompt in C:\USMT\amd64\, I'm executing:
scanstate.exe E:\USMTBackup /config:nothemeuiconfig.xml /i:MigApp.xml /i:MigDocs.xml /i:MigUser.xml /i:unconditionalexclusions.xml /i:blockwallpaperandthemev3.xml /i:getlocalpsts.xml /i:inclusions.xml /ui:domain1\user1 /ue:*\* /vsc /c /o /nocompress /localonly /v:13 /l:\\path\to\scanstate.log /progress:\\path\to\scanstate_progress.log /listfiles:\\path\to\scanstate_listfiles.log
The blockwallpaperandthemev3.xml contains:
<?xml version="1.0" encoding="UTF-8"?>
<migration urlid="http://www.microsoft.com/migration/1.0/migxmlext/blockwallpaperandthemev3">
<component type="Documents" context="User">
<displayName>Block Wallpaper, Theme and Display Registry Settings</displayName>
<role role="Data">
<rules>
<unconditionalExclude>
<objectSet>

<pattern type="Registry">HKCU\Control Panel\Appearance\* [*]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [Pattern]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [SCRNSAVE.EXE]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [TileWallpaper]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [WallPaper]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [WallPaperStyle]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop\Colors [*]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop\WindowMetrics [*]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Internet Explorer\Desktop\General [WallpaperSource]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Wallpapers\* [*]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\ThemeManager\* [*]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\Themes\* [*]</pattern>
</objectSet>
</unconditionalExclude>
<merge script="MigXmlHelper.DestinationPriority()">
<objectSet>
<pattern type="Registry">HKCU\Control Panel\Appearance\* [*]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [Pattern]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [SCRNSAVE.EXE]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [TileWallpaper]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [WallPaper]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [WallPaperStyle]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop\Colors [*]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop\WindowMetrics [*]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Internet Explorer\Desktop\General [WallpaperSource]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Wallpapers\* [*]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\ThemeManager\* [*]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\Themes\* [*]</pattern>
</objectSet>
</merge>
</rules>
</role>
</component>

<component type="Documents" context="User">
<displayName>Block Wallpapers and Theme Files</displayName>
<role role="Data">
<rules>
<unconditionalExclude>
<objectSet>
<content filter="MigXmlHelper.ExtractSingleFile(NULL, NULL)">
<objectSet>
<pattern type="Registry">HKCU\Control Panel\Desktop [SCRNSAVE.EXE]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [WallPaper]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Internet Explorer\Desktop\General [WallpaperSource]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\Themes\* [*]</pattern>
</objectSet>
</content>
</objectSet>
</unconditionalExclude>
<merge script="MigXmlHelper.DestinationPriority()">
<objectSet>
<content filter="MigXmlHelper.ExtractSingleFile(NULL, NULL)">
<objectSet>
<pattern type="Registry">HKCU\Control Panel\Desktop [SCRNSAVE.EXE]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [WallPaper]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Internet Explorer\Desktop\General [WallpaperSource]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\Themes\* [*]</pattern>
</objectSet>
</content>
</objectSet>
</merge>
<unconditionalExclude>
<objectSet>
<pattern type="File">%CSIDL_LOCAL_APPDATA%\Microsoft\Windows\Themes\* [*]</pattern>
<pattern type="File">%CSIDL_APPDATA%\Microsoft\Windows\Themes\* [*]</pattern>
<pattern type="File">%CSIDL_WINDOWS%\Resources\Ease of Access Themes\* [*]</pattern>
<pattern type="File">%CSIDL_WINDOWS%\Resources\Themes\* [*]</pattern>
<pattern type="File">%CSIDL_WINDOWS%\Web\Wallpaper\* [*]</pattern>
</objectSet>
</unconditionalExclude>
<merge script="MigXmlHelper.DestinationPriority()">
<objectSet>
<pattern type="File">%CSIDL_LOCAL_APPDATA%\Microsoft\Windows\Themes\* [*]</pattern>
<pattern type="File">%CSIDL_APPDATA%\Microsoft\Windows\Themes\* [*]</pattern>
<pattern type="File">%CSIDL_WINDOWS%\Resources\Ease of Access Themes\* [*]</pattern>
<pattern type="File">%CSIDL_WINDOWS%\Resources\Themes\* [*]</pattern>
<pattern type="File">%CSIDL_WINDOWS%\Web\Wallpaper\* [*]</pattern>
</objectSet>
</merge>
<unconditionalExclude>
<objectSet>
<script>MigXmlHelper.GenerateDrivePatterns ("\Users\*\AppData\Local\Microsoft\Windows\Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Users\*\AppData\Roaming\Microsoft\Windows\Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Windows\Resources\Ease of Access Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Windows\Resources\Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Windows\Web\Wallpaper\* [*]","Fixed")</script>
</objectSet>
</unconditionalExclude>
<merge script="MigXmlHelper.DestinationPriority()">
<objectSet>
<script>MigXmlHelper.GenerateDrivePatterns ("\Users\*\AppData\Local\Microsoft\Windows\Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Users\*\AppData\Roaming\Microsoft\Windows\Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Windows\Resources\Ease of Access Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Windows\Resources\Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Windows\Web\Wallpaper\* [*]","Fixed")</script>
</objectSet>
</merge>
</rules>
</role>
</component>
</migration>
I generated a config.xml called nothemeuiconfig.xml and changed this:
<component displayname="Microsoft-Windows-themeui" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-themeui/microsoft-windows-themeui/settings"/>
To this:
<component displayname="Microsoft-Windows-themeui" migrate="no" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-themeui/microsoft-windows-themeui/settings"/>
But themes, wallpapers - everything - still come over.
Opened a case with Microsoft, sent them:
the XML's I'm using
the command I used to generate the config.xml
the command I used for scanstate
the log files generated by scanstate
the command I used for loadstate
the log files generated by loadstate
Summary result of the MS case:
After much review & scrutiny, the command line and XML files are syntactically correct and rules are sound.
The articles I referenced in the ticket are indeed old and speak of an older version of USMT, so I can accept the possibility that something may have changed between USMT versions that render those suggested rules & instructions invalid.
Despite using
unconditionalExclude to unconditionally globally exclude objects, something else is trumping that rule, and there’s no way around that.
Even using
MigXmlHelper.DestinationPrioity() won’t help us here because, like above, something else trumps that rule, and there’s no way around that.
The last proposed suggestion is to disable the shmig component, which may or may not break or otherwise adversely affect the backup/restore of other things. (This may be too difficult to detect easily or in initial testing and the uncertainty doesn’t
give us confidence problems won’t arise as a result of this change. Also,
Ned Pyle's post post says NOT to, but then again that's an old post.)
Is this no longer possible or am I'm just doing it wrong?

Thanks for the reply
TimAmico!
I saw your responses on Friday & Saturday, but didn't reply because I wanted to think this over a bit and try to get a second opinion.
The 'Appearance and Display' component looks to have a has a number of sub-components.
<component displayname="Appearance and Display" migrate="yes" ID="appearance_and_display">
<component displayname="Windows Games Settings" migrate="yes" ID="appearance_and_display\windows_games_settings">
<component displayname="Microsoft-Windows-GameExplorer" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-gameexplorer/microsoft-windows-gameexplorer/settings"/>
</component>
<component displayname="Taskbar and Start Menu" migrate="yes" ID="appearance_and_display\taskbar_and_start_menu">
<component displayname="Microsoft-Windows-stobject" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-stobject/microsoft-windows-stobject/settings"/>
<component displayname="Microsoft-Windows-explorer" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-explorer/microsoft-windows-explorer/settings"/>
</component>
<component displayname="Personalized Settings" migrate="yes" ID="appearance_and_display\personalized_settings">
<component displayname="Microsoft-Windows-uxtheme" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-uxtheme/microsoft-windows-uxtheme/settings"/>
<component displayname="Microsoft-Windows-themeui" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-themeui/microsoft-windows-themeui/settings"/>
<component displayname="Microsoft-Windows-shmig" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-shmig/microsoft-windows-shmig/settings"/>
<component displayname="Microsoft-Windows-shell32" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-shell32/microsoft-windows-shell32/settings"/>
<component displayname="Microsoft-Windows-CommandPrompt" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-commandprompt/microsoft-windows-commandprompt/settings"/>
</component>
</component>
If I'm understanding the XML correctly, setting 'Appearance and Display' to 'no' will not bring over any of the sub components:
Windows Games Settings: Microsoft-Windows-GameExplorer
Tarkbar & Start Menu: Microsoft-Windows-stobject
Tarkbar & Start Menu: Microsoft-Windows-explorer
Personalized Settings: Microsoft-Windows-uxtheme
Personalized Settings: Microsoft-Windows-themeui
Personalized Settings: Microsoft-Windows-shmig
Personalized Settings: Microsoft-Windows-shell32
Personalized Settings: Microsoft-Windows-CommandPrompt
If so, that, to me at least, represents a pretty significant change! We want the pinned items but not the backgrounds and themes so that specific change won't work for us, but glad to hear it meets your needs. (Also greatly appreciate your sharing
your results with us.)
I'll admit, even before reaching out to MS, the logs clearly show that the themes/backgrounds are all part of the 'Microsoft-Windows-shmig' component but dang it if I want something of substance (read: official documentation) that covers what exactly that
component handles. (I like to know what I'm potentially getting myself into.)

MII 12.1 and NW CE 7.1 on Windows 2008

Similar Messages

Maybe you are looking for