Miix 10 - Graphics, sound and general performanc​e problems after Windows 8.1 upgrade

I upgraded to Windows 8.1 from 8 (tablet Lenovo Miix 10) and I encountered the following problems:
1. It wasn't possible to install an update of Intel Graphics Media Accelerator Driver through Windows Update. This update was "available" until I downloaded the new chipset drivers from Lenovo support.
2. Some times after returning from standby, It displays the message that the graphics card had crashed.
3. I have encountered several problems in these applications:
a) Twitter: When I scroll up and down my timeline the flow is not smooth. When I stop the scrolling to see a tweet the display does not stop, but it does a small "jump" in the direction that I was scolling before It returns to the point that I had stopped scrolling.
b) Fresh Paint: It is impossible to draw something. I cannot describe the problem, but it is exactly what happened also to this guy: http://answers.microsoft.com/en-us/windows/forum/w​indows8_1-winapps/fresh-paint-81-unusable-and-bloc​...
c) In Solitaire I encountered the same problems with this guy: http://forums.xbox.com/gfw/xbox_on_windows/l-o/f/3​066/t/1467072.aspx
3. In general, after the Windows 8.1 update the feeling I get when I use my tablet is that it has become more slow and unresponsive.
What is the cause of these problems? Will they be solved after the release of new drivers and when?

Hi
the GFX issue can be resolved with this post,
http://forums.lenovo.com/t5/Idea-Windows-based-Tab​lets-and/Miix-10-quot-Display-Driver-stopped-respo​...
the other issues ive not experienced!
i felt my tablet was very stable and fast, bar the GFx problem, (bearing in mind its a Atom)
id advise removing any apps you dont require,
doing a C Drive Clean up, (right click C drive,properties, disk clean up, then system disk clean up.)
then also doing a Defrag button in tools (it wont Defrag as its SSD, but it will TRIM the disk, (its done weekly by default anyway..)

Similar Messages

  • Dropbox, mail, and other apps having problems after 10.8.2 upgrade

    Here are a few of the symptons that I have experienced-
    Dropbox came up with a relink request and said the folder had been moved
    Mail shuts down suddenly
    Chrom shuts down suddenly and when I re open, the restore banner shows and then disappears
    within Chrom, the recently closed tabs in HISTORY does not show the tabs that were up when the mysterious shutdowns occur.
    comments please!

    Have you tried starting in Safe Mode and see if the problems still occur?
    Restart holding the "shift" key.
    (Expect it to take longer to start this way because it runs a directory check first.)

  • T410 - Keyboard problems after Windows 8.1 upgrade

    Hi to all!
    Recently i'm facing huge problems with the keyboard of my T410.
    The Laptop shuts down when I press "Alt Gr", if I press shutdown - the screen spins several times before shutting down, if I use the arrow-keys the screen also flips, the normal letter-keys won't work at all. Every pressed Button makes a little beepsound.
    The scrolling-funktion on the touchpad doesnt work either.
    Using an USB-Keyboard / Mouse, I have no problems at all.
    I have installed the latest drivers and bios-update.
    This problem is there after I upgraded windows 8 to windows 8.1. All windows-updates have been made.
    Do you have any tips to use my Laptop as a laptop again? At the moment I have a small desktop PC as the laptop won't work without usb-keyboard and muse.
    I looking forward to your replies. Best regards

    I don't no what in-place means but I installed the Upgrade to 8.1 via the Windosw Store on a running Windows8 system.
    I just re-ran System Update in the latest version, checked windows updates, checked the drivers via the lenovo support page manually, latest bios...but still doesnt work.
    In the Windows 8.1 Tested System List from the lenovo homepage which I just found is the T410 not listed. So I assume it could be a compatibility problem.
    Back to Win8?

  • Problems After Windows 8.1 Upgrade

    Hi,
    I am having the same problem as others on this forum.
    I have uninstalled and reinstalled all the related software without any positive result. This is annoying.
    Please get this fixed ASAP.

    Hi GerardJ,
    Welcome to the HP forums!
    I understand you've been having some difficulty getting your printer installed after upgrading to Windows 8.1. I'm sorry to hear that, but I will do my best to see if I can help out, I just need a bit more information as to your setup.
    1. Which model HP printer do you have?
    2. How is the printer connected to the PC?
    3. You said you are having the same problem as others, what problem would that be? What is going on that you are uninstalling and reinstalling the printer?
    4. What operating system did you upgrade from? Was everything working on that operating system?
    Have you tried downloading and running the HP Print and Scan Doctor to see what diagnosis it has to offer? If not, please give that a try and let me know the results. If it fails on anything please let me know where.
    Hope to hear back from you soon!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Problems with Twist Before and after Windows 8.1 Upgrade

    I'm not sure if this is a problem on Windows' end or Lenovo's, but here it goes. Problems AFTER Windows 8.1 update:
    1.) When I close the computer, even though the power management settings are set to put the computer to sleep, it only goes to sleep about 50% of the time. If I don't catch it, that means the battery will drain completely while I'm under the impression it's sleeping. The kicker is, even if I do catch it, I can't get the computer to turn back on. The screen stays black until I hold the power button down and force the computer to turn off and restart it.
    2.) iTunes will not open. I don't get any numbered error message, just a message that it failed. I've tried running iTunes in compatibility mode, and I've uninstalled and reinstalled it, to no avail.
    Problems BEFORE:
    1.) When I first got the computer, it was super quiet. Now the fan is pretty loud and buzzy. It seems that it may even be brushing something, because if I push the bottom up ever so gently, the sound goes down by half. Not a huge issue, but especially noticeable when I'm in tablet mode.
    I know that at least the last one isn't a unique problem. I can kind of live with that, but the first two are really driving me nuts.

    I made the mistake of loading W8.1 on my Twist without realizing how raw and bug prone the preview really could be.  The backout would require reloading a lot of applications, and this is not my primary PC, so I am toughing it out.  Saw updates load.  Current build is 9431.
    I am currently uninstalling software and updates until I get a stable environment again.  Here is some general feedback...
    I have not had an issue with the Lenovo System Update running.  I suggest you do ONE update at a time.
    50% of the shutdown/reboots fail and I need to hard power off with the power button
    Manually loading the latest Intel video driver software caused MAJOR problems.  Many programs simply did not run and everything was locking up.  Backing that out motivated me to remove other stuff.  The Lenovo System Update is offering to install a driver which I will attempt after all other firmware and drivers are updated.
    I use the Classic Shell v3.6.8 on the desktop.  I thought the 8.1 would return the start button, but I assume that Classic Shell is overriding that.
    Like others, I have had trouble getting the Juniper VPN software to load and work.  Trying to back everything out, but the virtual juniper nic is still showing up in the device manager.
    I am usually a reader of discussion forums and not a poster.  I will do my best to post my resolutions as well as issues.

  • Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual

  • HT1926 Quicktime stuttering, MOV file plays fine on my iphone but play it in my PC the sound and video stutters. happened only after the last update. how to fix

    Quicktime stuttering, MOV file plays fine on my iphone but play it in my PC the sound and video stutters. happened only after the last update. how to fix?

    Hi Richmoller51,
    Welcome to Apple Support Communities.
    See this article for some troubleshooting steps that can help with video playback in iTunes or Quicktime:
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    Best,
    Jeremy

  • Hi. when I'm texting, if the person i'm texting sends a text before i've sent mine, i dont get an alert sound and the message only arrives after mine is sent even though i may know its there waiting. I didnt have this problem till i updated software. 4s

    Hi all. Hope someone can help with this infuriating issue that I didn't have until updating. If a friend texts me while I'm texting them, I don't get an alert sound and the message stays outside waiting for me to send and finish. When I send, my friends message comes in but ive probably gone to home position and missed it. waiting for replies till all hours.

    I think the problem lays with Last.fm. I had the same exact problem as you. In your processes screen, end the task "lastfmhelper.exe" Last.fm still scrobbles. The tracks don't skip, although I notice there is still a bit of a lag in the first part of the song - but if you can deal with that, no skipping. I think you will have to end that task everytime you boot up your computer, or uninstall last.fm completely until they fix it; it is a bug in their software, as opposed to iTunes.

  • GRAPHIC CARDS AND 10.6.4 PROBLEMS - MAKES CS5 CRASHING!

    Photoshop CS5 has crashed on me several times today and *my screen becoming extremely distorted and flickering very fast, locking up the Mac and not responding at all*, leaving me to reboot.
    I tried PS CS5 in 32-Bit mode, and it is still crashing.
    +That crash just started appearing with the delivery of MacOS 10.6.4+. (Acobe engineers found unknown crashes moving up the statistics and had engineers looking at them) It is related to OpenGL, and probably to a driver update delivered with 10.6.4.
    Adobe has found no problems with CS5 and this is a problem related to Apples 10.6.4
    This has been discussed with users and engineers at Adobe here: http://forums.adobe.com/message/2957823#2957823
    We are working on a very important project with one of our main clients - and really needs this resolved asap! This is not just affecting gamers but creative professionals.
    Is there any news on this issue?
    Thank you very much,
    Kim

    A business that is using the latest OS, would also be taking risks, and would have been prudent and conservative, having multiple bootable backups to work with, and realize these things happen.
    Other than a brand new Mac that doesn't work with Leopard I can see having to have 10.6.3.
    As to how long since release to move production up from CS4 to CS5? well, people really detest the IT-minded for their "test, retest, and don't deploy until the testing is done" approach.
    I assume "graphic cards" and you have a Mac Pro 2009 w/ ATI 4870 or GTX 285, but your post was scant on that, and it is really helpful to have a more complete .sig with hardware profile to see.
    There is a patch from Nvidia for GTX 285. You should be able to roll-back to 10.6.3.

  • Camera, sound, and general design issues

    I bought an iPod Touch 3G about a year ago. Recently, I sold my 3g and bought a 4g. I am a professional web and interface designer and have been in the industry about 5 years.
    With the iPod upgrade, I got camera functionality. Also, the recent iOS update added a new set of sound options. It appears that you can have the sound muted, but still get notification sounds from mail, facetime, and perhaps other applications as well; a good feature. The multitasking bar also now has a volume slider as well.
    My Proposal (see below for details)
    - Link the camera shutter sound to the regular iPod volume. Or have a setting to turn shutter on and off. Or add a “Ringer and Alert” option to disable shutter sound.
    - Add a “mute all sounds” button in the multitask bar.
    - Remove the sound slider in the multitask bar and replace it with a brightness bar.
    The Camera
    The camera seems to work great. Unfortunately, it isn’t the highest quality, which I heard was not due to cost, but because of size. Really Apple? Because 0.28 inches is just borderline “too thick?” But that is a whole other issue. The issue I am having is that the camera makes a really nasty (and often loud) shutter noise whenever I take photo, even when the sound is muted. Apple did add the “Ringer and Alerts” sound volume, which apparently also is linked to the camera shutter noise. So either I get audio mail alerts with shutter noise or I get no audio mail alerts with no shutter noise. The “Ringer and Alerts” section allows me to disable certain sounds (incoming mail, outgoing mail), but not the shutter sound. Shutter noises are annoying and there are plenty of circumstances where you do not want a shutter noise. And no, I am not talking about perverted circumstances. Say you are in a boring conference reading a magazine and want to send a photo of a page to a friend? Perhaps you are in a retail store doing some comparison-shopping online and are taking photos of bar codes? Maybe I have witnessed a crime and want to capture a photo of the fleeing perp. There is no reason that people within a 3-block radius need to know that you are taking a photo with my iPod Touch (…and yes, the last example was a bit over the top). Since mail alerts are very useful, I tend to leave them on even when the volume is muted. I typically leave my sound muted because often I may be using a sound application (games, youtube, etc) in a waiting room or other situation where there are people around. I like to be courteous to other people, so I leave my phone on vibrate and go to an unoccupied room (when possible) when receiving a phone call. So leaving my sound on is not a good option for me. However, in order to take a silent photo, I have to go into settings, go to sounds, and slide the “Change with Buttons” option to off. Then when I am done taking the photo, I have to slide it back. Very inconvenient and I have to remember to do it if I am taking a silent photo. Why not add a “Camera shutter” option to the list of sounds in the “Ringer and Alerts” section? Or maybe just bundle the camera shutter sound with the regular volume control of the iPod Touch. Or just add a setting to turn shutter sound on or off.
    The Sound
    Why is there no easy way to “mute all sounds,” especially with the new sound options of the iOS? This option should be added to the multitask bar. If you are going into a meeting and do not want audio alerts. When the meeting is over, simply go back to the multitask bar and unmute all sounds; simple to use, easy to add. Why did Apple add a volume control to the multitask bar? You can adjust the volume from any application by using the external buttons! Also, perhaps I just don’t understand the new functionality of the volume buttons, but how come you cannot adjust volume from within some applications (camera and others)? The buttons just don’t seem to do anything in those applications. Why in the world would you do that? Those sound buttons have a specific purpose that users are accustom to. No matter what application you are in, you can easily adjust the sound. If you have some feedback on the new functionality of the buttons, please let me know.
    The Brightness
    Sound and brightness are the two items I change the most. Sometimes I am using my iPod Touch in a dimly lit room, so I like to turn down the brightness. The auto brightness works, but not well in dimly lit rooms. Watching YouTube videos can sometimes be a bit cumbersome with the brightness. If the video is to bright or dark, you can to exit the YouTube app, go to settings, adjust the brightness, go back to YouTube and resume the video. The same goes for the Video application. Some games are brighter or darker than others, so adjusting the brightness after starting a game is a common circumstance. Why not replace the audio controls in the multitask bar with a brightness option. Audio is accessible (or at least should be) from any application thanks to the hardware buttons.

    Welcome to the discussions,
    this is a user to user forum, and Apple does not follow the discussions. But you can address Apple directly using this link: http://www.apple.com/feedback/ipodtouch.html

  • Sound problems after iOS 4.2 upgrade

    Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

    Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

  • Timeouts and connection problems after 5.1(2) upgrade

    AIM/chat and some other programs are having timeout/connection problems after upgrade to 5.1(2). I am using S241 also. The connection problems stopped when the IPS was set to bypass. Rebuilt IPS and left sigs at default settings and problem is still happening. I am not seeing any of the IPs that are having the problem in the Event Viewer or on the Events in the IDM.
    Any known issues with the 5.1(2) that would cause this type of problem?

    I don't know specifically, but I did notice that 5.1(3) was released today.

  • I have been using firfefox 3.6.8 since release and have had no problems running Windows 7. Today, I am unable to print anything from the internet using firefox. IE 8 as well as all other programs print fine. Any suiggestions appreciated. Thjansk.

    I am unable to print using Firefox 3.6.8 starting today. All other programs print fine including IE8. I am using Win7 64bit. I did not change any configurations and voila - today the problem started.
    Thanks for any help.

    See http://kb.mozillazine.org/Problems_printing_web_pages and [[Printing a web page]]

  • My g4 running tiger won't startup, got the sound and apple on screen but after that the screen is just blank but not black!

    was working fine, today I startup and all seems normal but after the apple logo it just won't start, the screen is just blank.

    Hi there,
    Does it boot with the Option/alt key held down & show boot choices?
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.

  • Dictation problems after ios 8.2 upgrade

    I rely heavily upon dictation.   2 problems occur (at minimum) after ios 8.2 upgrade to iphone 6. .
    1. I wasnt going to add this dictation bug (feature ;-)) b/c couldnt reproduce the seemingly safari bug when got home, but as I was dictating my first sentence for defect here, it happens in this text box on any line. :-(.
        1. Problem is as soon as dictation types in word Or words, when I hit done, it erases what was just dictated!  Happens on even just ine word. (So having to manually type all of this n I stink at typing ie, time consuming).
        2. I can paste characters from noteoad into here...so must be dictation relateD...it seems.
    2.  In the calendar textbox, when I dictate a new event (doesnt happen in location textbox) and the last character before it fills up the end of textbox (just before the "x"), it automatically does "done" for me (the beep sounds), it stops dictating, but more annoying is it will no longer allow me to continue dictating in that new event's top textbox.  That means I HAVE to type n I stink at that. To reproduce I simply:
    1. press the microphone.
      2. Type in only numerics 1 thru 17....it will dictate to look like this:  123 456-789-1011 1213 1415 1617
      3. "Beep/dong" noise because it hits the end of characters alowed it seems n decides it is "Done".
      4.  press the microphone
       5. "Beep/dong" noise because it wont let you dictate any more of anything said.
    I Couldnt find the entry where google shows someone with what looks like same issue/bug/defect/feature # 2, so entering this.
    I Have warranty but cant figure out how to get phone support for iphone (only mac ...last year).
    I don't seem to have this problem using i notepad in phone when he gets to having to wrap. :-)
    I Have not trieddictation on my mac...yet.
    CAn someone help on these issues please? Thanks!

    Hey Markwoody,
    Wow! That definitely sounds frustrating, but good job so far isolating and troubleshooting the issue. We have a few more steps that we can try in an attempt to resolve this issue:
    First, it sounds like you have tried restarting your phone. Let’s try a reset instead:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/ht201559
    How to reset
    - You should reset your device as a last resort and only if you can't restart it.
    - To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    If the issue persists, we’ll want to restore your device to factory settings and test once more. You can backup your device, but be sure to restore it as new first for isolation purposes, as restoring a backup can sometimes restore the same issues that you were experiencing before.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    http://support.apple.com/en-us/HT201252
    Thanks,
    Matt M.

Maybe you are looking for

  • Availability of the iPad Store for Colombia

    Hi, Recently i purchase an iPad in the US, but i live in Colombia. Right now i need to purchase the iwork suit for my iPad but as i understand it is not possible to do so because the iPad Store is not ye available for Colombia. I need to know when it

  • How to make a custom agent with dynamic properties that can be changed with OMS

    I have made a custom agent where old documents will be purged. We are doing this with a parameter purgeDate. Now we do this from the Oracle9IfsManager. So if we want a new date, we have to unload and load the server to use the new date. I see that so

  • Change text field based on dropdown

    Hello, I'm new to LiveCycle and am having trouble getting a textfield to change when I select different options in a drop-down menu.  I used the following script (tried using exit and calculate events also): Still not working.  What am I doing wrong?

  • Sap script useful in HR-ABAP

    Hi, I want to know in What  way sap script is useful in HR-ABAP.

  • SNMP traps config

    G Control 11.1 My scenario is ( 3 components): Node A (managed, monitored) ---- GC box------ SNMP box (final destination). It looks like a simple config, but I've got into a confusion about it. I'm trying to figure out the configuration to send SNMP