Miix 2 11 Tablet, needs both power and USB on tablet

I recently got the Miix 2 11" tablet. It has a combined usb+power port on the tablet part. On the lenovo webpage for this product, and on Amazon, there was a picture that shows that the tablet has two separate connectors. A power connector, and a micro-usb connector. I need to charge the tablet and use usb at the same time. Is there a way to do it with the combined usb+power connector WITHOUT the need to connect the keyboard part?

Similar Messages

TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
 Cheers, Tom

What are smart mailboxes and why do i need both smart and "normal" ones?

What are smart mailboxes and why do I need both smart and "normal" mailboxes?

Hi Kingoftypos,
Thanks for that clarification. So, now it appears that the ultimate purpose of a Smart Mailbox is to point to all emails that meet the criteria in a single place, so if they are spread among several mailboxes, you will be able to see them all together. Here is an article from Apple that describes it:
A Smart Mailbox displays in one location messages that are stored in other mailboxes, so you don’t have to move messages between mailboxes. The messages displayed by a Smart Mailbox are based on criteria you define, and are automatically updated to include new messages that match your criteria. For example, you might create a Smart Mailbox that displays all messages found in all mailboxes from a specific sender.
If you change a message in a Smart Mailbox, such as marking the message as read or unread, or moving or deleting the message, the change is reflected in the mailbox where the message is actually stored.
So, adam, I would think that, if you had mail going to a lot of different places, and wanted to be able to see a particular set of those in a single place, you would use a smart mailbox. Maybe use the rules to direct your mail to different places to start with, but a smart mailbox to bring a set of common ones all together into a single smart mailbox?
Maybe you have Rules move your Amazon mail to an Amazon folder and your Apple mail to an Apple folder, but then you have a Smart Mailbox that contains any mail that has the word "Receipt" in the Subject line?
Just a thought....
Cheers,
GB

My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! help!!!

My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! help!!!

I Had it on my iPod, but I reset to factory settings and it got deleted :( If I find a way to get it back, I'll post it here so you can too.

I installed dreamweaver on Windows. After installing it, it blocks my access to the internet. Solution? I discarded it and it was okay, but I need both dreamweaver and internet acces.

I installed dreamweaver on Windows. After installing it, it blocks my access to the internet. Solution? I discarded it and it was okay, but I need both dreamweaver and internet acces.

See iPhone DFU mode explained, and how to enter DFU mode.

Is there a 64-bit gdb for Solaris (I need both x86 and Sparc)

I'm looking for publicly available versions of gdb for both SPARC and Intel. I'm the current
developer of the NetBeans gdb module and we've had bugs filed that our Solaris users
can't debug 64-bit applications.
I've built a 64-bit gdb but its trying to dynamicly load a 32-bit .so (libexpat.so.0). I can still
run it by setting LD_LIBRARY_PATH, but can't figure out how to configure my gdb build
to use the right libexpat. Even if I could, I need something like the companion CD or
sunfreeware.com to provide (I'd even settle for gdb.gnu.org:-)
If anyone knows of publicly available versions, please email me.
Thanks,
Gordon

Again, I think you need to check the Microsoft web page, as I was able to find 64 bit versions of IE8 for download.
The URL to access the page is
http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-8
From that page, I am able to select a 64 bit version of IE 8 for the following Operating Systems
-- Windows XP 64 Bit
-- Windows Vista 64 Bit
-- Windows Server 2003 64 Bit
-- Windows Server 2008 64 Bit
Windows 7 is not listed as an option as it already comes with IE8 installed by default.
Looks to me that Microsoft has already released a 64 bit version of IE8.
In fact, I went ahead and downloaded IE8 for Windows 2003 Server x64 bit, and looked at the details of the file. Each microsoft download has a digital signature associated with them, showing a date and time of when the exe was built.
According to what is shown below, IE8 for Windows Server 2003 has been around since Sunday, March 08, 2009.
So, what has adobe been doing since March of 2009? IE8 has been 64 bit for well over 2 years now (it will be 3 in March of 2012). While I know that it does take time to develop new applications, I don't think it would take 3 years for Adobe to come up with a 64 bit version of Reader that could have been built under the 64 bit platform.
--Brian

PCUI- Need both List and Form under one tab

Dear All,
I have a requirement where i need to show 'LIST' and 'FORM' views of the data at the same time under one of the tab on Business Partner screen details.
In general when the field are added to the list, user has an option to change LIST view to the FORM view or vice versa, but in this requirement the data should be available in both form at the same time.
Need the help urgently.
Regards,
D. Chakrapani.

Hi,
Can you be please more specific with what exactly is the requirement? Do you want to show the Data under a particular in both List and Form view simaltaneously?
Well for starters you can try the following:
1. Lets say the event you want to display is 'X'
2. For displaying data in the list view, in the Detail Area 1, maintain entries for 'X' event with the requisite field groups and screen element type as 'LIST' in your application layout table
3. For displaying data in the form view, you can use Detail Area 2, maintain entries for 'X' event with the requisite field groups and screen element type as 'FORM' in your application layout table
Let me know in case you need more clarifications

IPod dock connected to both firewire and usb at same time

I have 3 ipods, 3G 4G 60gb photo 5G 80gb vid. I have a 5G doc and a dual usb / firewire cable. I prefer to manage my 3G and 4G using firewire as it is oh so quicker. However 5G requires usb2 only. I have a Apple 'dual' usb/firewire port cable that at the moment to use I alternate which socket is plugged into the front port of my PowerMac G5 as they are the only spare ports I have.
I just bought an Iomega Ultra Max which comes with a built in firewire and usb hub that means i now have enough ports to dedicate one of each to the ipods but want to use only one dock and so I would like to plug both the firewire and usb iPod cable into the hub and leave them there connected to the iPod dock. I know it won't cause problems when the 5G is connected as there is no hardware for firewire connection. But the 4G has both.. will I encountering a usb and firewire conenction cause problems and possible damage to the ipod or my PowerMac G5, will the 4G ipod use firewire in prefeance to USB if it will work???

Hi iPodista;
I would recommend very strongly that you don't even attempt do this. Generally cross connecting in this fashion is a very good way to get yourself into serious troble.
Allan

EJB client needs both source and generated jars?

From within JDeveloper, I created a basic EJB with a default package called EJBHello. Here is my directory structure after building and deploying this EJB:
h:\EJBHello\EJBHello\EJBHome.java, etc.
h:\EJBHello\EJBsource.jar
h:\EJBHello\EJBgenerated.jar
h:\EJBHello\EJBClient.java
With only EJBgenerated.jar in the classpath, the client ran fine in this environment. However, when I renamed h:\EJBHome\EJBHome to h:\EJBHome\temp, the client would no longer run - java said it could not find EJBHello\EJBHome.class. I then added EJBsource.jar to the classpath, and the client would once again run. Does this mean that, in general, I must ship both the source and generated jars with the client classes?

You need to deploy the class files specific to your client as well as the generated stubs for the EJB.

Have iPhone 5 set to back up to iCloud but need both iTunes and iCloud done...

after going from 4s to iphone 5 and dragging and dropping like 15 playlists and about 4300 plus songs there must be a better way.
I backup complete itunes folder, exporting all playlists as xml files i am learning as i went from 3 to 3GS to 4 to 4s and now to a 32gb white 5. while i learned on the 4s to 5 that icloud only does store bought music of which i have a lot but most is my own music ripped from my cd's at AAC 320 VBR.
anyhow problem is i always did itunes manually never auto sync for at least 6-7 years as i did auto sync once on original ipod and learned never again after a wipeout.
so i keep icloud on (under icloud on iphone) and itunes also is checked back up to icloud on"summary page" of iphone when it's plugged into itunes 10.7. i did try changing the settings back and forth but
and hit back up every other day or so using icloud manually in phone. i did the turn one off and other on once or twice but based on time etc. it seemed like it had to start a complete backup tpicloud agoin but checking icloud via broweser (IE 9). but do use itunes daily and manually hit the sync button and rite click my iphone in left column and choose backup daily. I see the backup in preferences so assume it's doing its thing. I use 4 pop3 accounts including terrible icloud mail which is so spotty. it started as @me in july and in august my kids signed up and got @icloud addresses. i see i have them also in email settings under icloud allowing me to send or recieve from either.
none of that matters I just want to know if my dual backup scenario is actually working. apple says its one or the other from their own KB articles. BUT I THINK DIFFERENTLY JUST BY THE RESPONSE MANUALLY.
I see the space taken up by the current iCloud backup I do. I also see the current back up I do manually through iTunes so does any other user here know if this works? I see my "notes" and any changes made today so at least iCloud is picking it up...now how to find if iTunes is doing the same.

no one has doubled up on their backups so they don't lose earlier bought music or expensive audiobooks prior to iTunes 10.3?
or at the least none of the knowledgable people here are familair with doing this?
thank you I have huge library and don't want to manually redo it again for my own music. the store bought apps and music for the most part works from icloud but I defenitely want both options available to me.
thank you

Officejet Pro 8000 Wireless Has Both Power and Resume Buttons Blinking

Using Vista operating system with my Officejet Pro 8000 Wireless. The Power button and the Resume button are blinking at the same time. I went through HP's recommended fixes step by step and it still has the same problem. I've done all the resets, etc., etc. and I searched High and Low for a paper jam which these two blinking lights apparently indicate but could not locate even a tiny little piece of paper jammed.
Any help is appreciated and by the way, this printer has not been used a ton. Simple average use and well below the monthly use rating.
Thanks, Rick

I also have been having this exact same problem for over two years now but never found a solution. I think I have only printed out about 50 pages since I purchased the printer new in 2010 and at one point it just started doing this. I can reset the printer by unplugging it and it will work temporarily; sometimes long enough to print out 2 or 3 pages but always goes back to the same faulting state within minutes. This happen whether or not it's connected to a network, USB, or nothing at all. I also have the newest firmware and purchasing new ink cartridges about 15 months ago never fixed it. (They are nearly empty now and I don't think I have printed more than about 15 pages!) Does anyone from HP know why the printer keeps faulting like this? I print so seldom that it's a shame for me to have to have to buy a new printer just so that I can print out the odd few pages every few months, and this one was expensive back when I purchased it and it's practically useless when it keeps faulting like this.

Do I need BOTH Skype and Skype WIFI apps for my iphone?

it was stated, the difference is with skype wifi, you can use your credit you bought on skype to pay for wifi access in hotels, etc.
therefore you don't need skype wifi if you have infetnet or free wifi.
what is so hard to understand?

That's how I understood the answer. Using the 'normal' Skype app you can use 3G or WiFi (depending on my settings). If WiFi access needs to be paid for (on a train, through a hotel, etc.), it often comes in minimum 1 hour blocks, in which case Skype WiFi allows you to access WiFi just for the duration of the Skype call, providing you have sufficient Skype credit.There are two reasons why you might want to do this: (a) even though you might have your phone service set to 'Roaming', calls in or out might not work (happens to me all the time in the Middle East); and (b) you only pay for your actual call time. Whether that represents overall value for money depends on Skype call rates versus the 1-hour charge from the train, hotel, etc., so that element is worth checking.As to 'most WiFI hotspots being free', that may be true for much of urban Europe and the US, but it's not true for large parts of the rest of the world.

Both internal and USB mics not working

Hi there, all. Long-time lurker, first-time poster. Starting last night, I have been having issues with microphone use on my iBook G4. Neither the internal mic nor my USB headset mic (Altec Lansing AHS302USB) are accepting input.
The internal mic's failure doesn't surprise me, as I have heard about the delicate nature of the wire connecting the internal mic from its position on the display down to the main computer. It's the USB mic that confuses me, since USB mics are what everyone seems to recommend that people use when the internal mic is on the fritz (thanks to other mics not working with Mac due to the line-in thing). Also there is the fact that I have used this headset with this computer for over a year with no significant issues until now, with both mics simultaneously failing.
There doesn't seem to be a problem with the headset's wires; I am still able to hear audio through the headphones quite well, and when I load my audio recording program (Audio In) and Sound Preferences, I can see the occasional blip of sound recognition when I move the USB adapter portion around in the port. These blips even occur when the pink microphone jack and headphones jack are unplugged from the adapter, so this suggests to me that the problem lies not with the wires, but somewhere in the USB adapter, port, or the computer itself.
I'm leaning toward the computer itself, since it just seems odd that both mics would just happen to stop working at the same time. That and the fact that audio output still works through the headset, and the USB ports work fine for other USB devices such as my external drive and iPod.
I have tried restarting, resetting the PRAM, and repairing permissions with Disk Utility. Nothing's working so far.
Does anyone have any idea what could possibly be wrong?
For reference's sake, I took a recording of the sound that results from jiggling the USB headset adapter in the port. It's very quiet, so you may need to turn up the volume a little bit to hear it. Again, these are the ONLY sounds that the mic is able to pick up currently.
http://animeutahime.com/temp/faultymicrecording.mp3
iBook G4 Mac OS X (10.4.10) 768 MB RAM, 37.7 GB hard disk

Just to chime in here - I wonder if it's down to the software: I've recently updated to 10.4.10, and the internal mic seems to have stopped working.
One positive effect of the change to 10.4.10 is that my Griffin iMic no longer flips to 8-bit, 22khz recording when I plug it in.
Having said that, I really like to get my internal mic back up and running again.
iBook Mac OS X (10.4.10) 1.5gb RAM, 60gb hard disk

Can you have both Wireless and USB printing configured simultaneously on HP Laser mono 1102w

Hi Guys / HP,
Just wondering if you can have the HP Printer mono laser p1102w setup for both USB2 cable hard-wired to notebook and for wireless connections concurrently.
Trying to install printer with both setups via install CD on my HP notebook Pavilion dv6.
Because when installing the printer CD it asks for one or the other i.e. USB or Wireless.
Is there an easy workaround.
Regards
Mike
[Content Removed]
This question was solved.
View Solution.

Hello,
You should be able to connect both, but not Ethernet and wireless at the same time.

Both wireless and USB printing on a MX892?

I am currently printing from my computer to a new MX892 via a USB cable. I was afraid to set up wireless in case that would mean I could only print wirelessly, which is likely not true. I might (rarely) choose to print from my iPad or iPod wirelessly, if that was an option. My question: Can I set up wireless printing for those rare occasions without creating problems for printing via USB the majority of the time?

Hi paulb,
You will need to connect the printer to your network wirelessly prior to printing from your iPad and iPhone. To setup the printer wirelessly, please follow the steps located at the link below related to your operating system:
Wireless Setup - Windows
Wireless Setup - Mac
Once the printer is connected wirelessly, you can setup your iPad and iPhone to print via AirPrint. To do this, please follow the steps located here.
Hope this helps!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Miix 2 11 Tablet, needs both power and USB on tablet

Similar Messages

Maybe you are looking for