Miix 3-830 Win10 Update Rotationssperre / Ortung

Hallo liebe Gemeinde, gestern habe ich das Update durchgeführt (ging nur mit löschen aller Daten, Speicherkapazität). Nun fehlt die Rotationssperrre komplett. Der Betrieb geht entweder Hochformat oder Querformat, Ein automatischer Wechsel findet nicht statt. Die Ortung geht nur über Providerdaten, also auch nciht mehr sehr gut. Hat jemand ähnliche Erfahrung oder noch besser Lösungen?

Hallo BCCB63,
hast du diese Option schon deaktiviert?
(evtl. vorher die Tastatur trennen, damit das Gerät als Tablet erkannt wird)

Similar Messages

  • Miix 3-830 BIOS Update

    Hallo, sit kurzem habe ich das Miix 3-830. Nun möchte das akt. BIOS flashen. Installiert ist BCCN10WW. Akt. laut Downloadseite ist. BCCN14WW Habe mir die Datei: bccn14ww.exe geladen. Netzanteil angeschlossen und Akku voll. Nach Start der Datei (Admin-Rechte) nichts.
    Laut Ereignissprotokoll: Der Dienst "GENERICDRV" wurde aufgrund folgenden Fehlers nicht gestartet: Dass System kann die angegebene Datei nicht finden.
    Habe gefunden, dass eine Datei amifldrv32.sys notwendig ist. Diese aus dem Netz geladen und das Verzichnis der bcc14ww kopiert.
    Nach Start der Datei wird das Update Programm nun gestartet, bricht aber mit einem Fehler ab. Fehler 18 Secue Flash Rom Veriy Fail.
    Nun weiß ich nicht mehr weiter. Gefunden habe ich, dass evtl. das EPROM einen schreibschutz hat.
    Hat jemand das Update durchgeführt und wie?
    Danke für die Rückmeldung.

    Hallo zusammen,
    ich habe hier ein Anfrage an die Entwickler gestell und warte auf Rückinfos. 
    Eventuell steht der Fehler in Zusammenhand mit folgenden Hinweisen aus der Flash-Anleitung:
    Note1: In case that your computer had been updated BIOS with version of BCCN09WW or earlier, and you want to update it to BCCN10WW or higher, You should use intel flash utility FPT (//Anleitung?) AMI flash utility AFU will not be used.
    Note2: BIOS version of BCCN12WW or earlier does not support GUI Winflash. The BIOS does not support GUI Winflash need reference document of Flash-BIOS-SOP-V03.pptx (//nicht verlinkt?) or earlier version to flash BIOS.
    Wir halten euch auf dem Laufenden.
    Gruß - Sebastian
    → Wenn Du eine Lösung auf Deine Frage erhalten hast, markiere diese bitte als gelöst - Hilfreiche Beiträge verdienen Kudos. Zögere nicht Kudos zu vergeben.   

  • MIIX 3-830 Treiber Update

    Hallo, habe versucht akt. Treiber von der LENOVO Seite zu installieren. Z.B. die 67pl39f.exe. Nach Start und selbstentpacken startet die CMD und einige Befehler werden ausgeführt. Allerdings keine Updates. Es kommen immer ähnliche Melungen Hier die Meldungen. Hat jemad eine Lösung?
    Microsoft Windows [Version 6.3.9600]
    (c) 2013 Microsoft Corporation. Alle Rechte vorbehalten.
    C:\WINDOWS\system32>cd C:\drivers\MIIX 3-830 Platform Drivers
    C:\drivers\MIIX 3-830 Platform Drivers>install
    Install IO driver
    Microsoft-PnP-Hilfsprogramm
    Verarbeitungsinf.:            iaioi2ce.inf
    Für kein Gerät auf diesem System konnte der Treiber installiert werden : Es sind
     keine Daten mehr verfügbar.
    Versuche gesamt:              1
    Anzahl erfolgreicher Importe: 0
    Install GPIO driver
    Microsoft-PnP-Hilfsprogramm
    Verarbeitungsinf.:            iaiogpioe.inf
    Für kein Gerät auf diesem System konnte der Treiber installiert werden : Es sind
     keine Daten mehr verfügbar.
    Versuche gesamt:              1
    Anzahl erfolgreicher Importe: 0
    Install UART driver
    Microsoft-PnP-Hilfsprogramm
    Verarbeitungsinf.:            iaiouart.inf
    Für kein Gerät auf diesem System konnte der Treiber installiert werden : Es sind
     keine Daten mehr verfügbar.
    Versuche gesamt:              1
    Anzahl erfolgreicher Importe: 0
    Install GPIO Virtual driver
    Microsoft-PnP-Hilfsprogramm
    Verarbeitungsinf.:            iaiogpiovirtual.inf
    Für kein Gerät auf diesem System konnte der Treiber installiert werden : Es sind
     keine Daten mehr verfügbar.
    Versuche gesamt:              1
    Anzahl erfolgreicher Importe: 0
    Install MBI driver
    Microsoft-PnP-Hilfsprogramm
    Verarbeitungsinf.:            MBI.inf
    Für kein Gerät auf diesem System konnte der Treiber installiert werden : Es sind
     keine Daten mehr verfügbar.
    Versuche gesamt:              1
    Anzahl erfolgreicher Importe: 0
    Install PMIC driver
    Microsoft-PnP-Hilfsprogramm
    Verarbeitungsinf.:            pmic.inf
    Für kein Gerät auf diesem System konnte der Treiber installiert werden : Es sind
     keine Daten mehr verfügbar.
    Versuche gesamt:              1
    Anzahl erfolgreicher Importe: 0
    Install BM driver
    Microsoft-PnP-Hilfsprogramm
    Verarbeitungsinf.:            IntelBatteryManagement.inf
    Für kein Gerät auf diesem System konnte der Treiber installiert werden : Es sind
     keine Daten mehr verfügbar.
    Versuche gesamt:              1
    Anzahl erfolgreicher Importe: 0
    Install DPTF driver
    Microsoft-PnP-Hilfsprogramm
    Verarbeitungsinf.:            Dptf.inf
    Für kein Gerät auf diesem System konnte der Treiber installiert werden : Es sind
     keine Daten mehr verfügbar.
    Versuche gesamt:              1
    Anzahl erfolgreicher Importe: 0
    Install Audio driver
    Microsoft-PnP-Hilfsprogramm
    Verarbeitungsinf.:            isstrtc.inf
    Für kein Gerät auf diesem System konnte der Treiber installiert werden : Es sind
     keine Daten mehr verfügbar.
    Versuche gesamt:              1
    Anzahl erfolgreicher Importe: 0
    Microsoft-PnP-Hilfsprogramm
    Verarbeitungsinf.:            rtii2sac.inf
    Für kein Gerät auf diesem System konnte der Treiber installiert werden : Es sind
     keine Daten mehr verfügbar.
    Versuche gesamt:              1
    Anzahl erfolgreicher Importe: 0
    Install Camera driver
    Microsoft-PnP-Hilfsprogramm
    Verarbeitungsinf.:            camera.inf
    Für kein Gerät auf diesem System konnte der Treiber installiert werden : Es sind
     keine Daten mehr verfügbar.
    Versuche gesamt:              1
    Anzahl erfolgreicher Importe: 0
    Microsoft-PnP-Hilfsprogramm
    Verarbeitungsinf.:            hm2056.inf
    Für kein Gerät auf diesem System konnte der Treiber installiert werden : Es sind
     keine Daten mehr verfügbar.
    Versuche gesamt:              1
    Anzahl erfolgreicher Importe: 0
    Install graphic driver ....
    ECHO ist ausgeschaltet (OFF).
    Microsoft-PnP-Hilfsprogramm
    Verarbeitungsinf.:            igdlh.inf
    Für kein Gerät auf diesem System konnte der Treiber installiert werden : Es sind
     keine Daten mehr verfügbar.
    Versuche gesamt:              1
    Anzahl erfolgreicher Importe: 0
    Install Gsensors driver ....
    ECHO ist ausgeschaltet (OFF).
    Der Befehl "de" ist entweder falsch geschrieben oder
    konnte nicht gefunden werden.
    Gewartet wird 0 Sekunden. Weiter mit beliebiger Taste...
    Der Befehl "de" ist entweder falsch geschrieben oder
    konnte nicht gefunden werden.
    C:\drivers\MIIX 3-830 Platform Drivers>:

    Hallo zusammen,
    ich habe hier ein Anfrage an die Entwickler gestell und warte auf Rückinfos. 
    Eventuell steht der Fehler in Zusammenhand mit folgenden Hinweisen aus der Flash-Anleitung:
    Note1: In case that your computer had been updated BIOS with version of BCCN09WW or earlier, and you want to update it to BCCN10WW or higher, You should use intel flash utility FPT (//Anleitung?) AMI flash utility AFU will not be used.
    Note2: BIOS version of BCCN12WW or earlier does not support GUI Winflash. The BIOS does not support GUI Winflash need reference document of Flash-BIOS-SOP-V03.pptx (//nicht verlinkt?) or earlier version to flash BIOS.
    Wir halten euch auf dem Laufenden.
    Gruß - Sebastian
    → Wenn Du eine Lösung auf Deine Frage erhalten hast, markiere diese bitte als gelöst - Hilfreiche Beiträge verdienen Kudos. Zögere nicht Kudos zu vergeben.   

  • Win 8.1 Miix 3-830 windows update problem

    I received the notice to restart the tablet to finish the windows update, so I did but the tablet took several hours to restart. Then It restarted but now I see that update is stuck at 7% and not increasing at all
    The message I got is 'Updating your system (7%)
    Can anyone help me to solve this problem..

    Hi,
    Since each UI change related to registry keys, I suggest we first modify the related registry key to see if the changes can be kept.
    1. Run regedit to open Registry editor.
    2. Find the SID corresponded to you user account by check USERNAME under HKEY_USERS\S-1-5-21-****-****-****\Volatile Environment
    3. Locate to following key under your SID: HKU\S-1-5-21--****-****-****\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced.
    4, Take ownership on this key:
    Take Ownership of a File, Folder, Drive, or Registry Key in Windows 8
    http://www.eightforums.com/tutorials/2808-take-ownership-file-folder-drive-registry-key-windows-8-a.html
    5. To not show hidden files and file extensions, please edit following value as below:
    Hidden: 0x00000002
    HideFileExt: 0x00000001
    6. Let's see if the changes were kept.
    If it cannot fix your issue, this issue can also be caused by corrupted user profile, please check if this issue still happened after you create and login with a new user profile.
    If the new user profile works fine, refer to these steps to repair your previous corrupted user profile:
    How to fix corrupt user profile in windows 8 / Windows 8.1?
    http://mywindows8.org/fix-corrupt-profile-in-windows-8/
    Hope these could be helpful.
    Kate Li
    TechNet Community Support

  • Another request for Lumia 830 Denim update information

     I have the AT&T variant of the Lumia 830 and am waiting for a firmware update to fix two issues. However, there has been no communication as to when this firmware update will be released. I have only a short window to return this device and if I do not know when the firmware will be released, I would prefer to return it now and buy something else rather than waiting for several months. Let me be clear. I'm looking for specific availability dates and not a vague assurance that it's coming "soon" and that I should keep checking to see if it's out. If this information is not available now to Customer Support, please make the effort to reach out to the responsible team that does have this information. Even a date range specified in terms of days, months, or weeks would be helpful, along with any details that can help us understand why there is a delay. Of course, even better than knowing the release date would be having the firmware update pushed to my phone today. So that you can understand why I am eager to get this update, I've provided additional information below. I realize that this issue has been raised in other threads, but I'm adding as much detail as possible here so that I can refer to this post from support calls and any attempts to escalate my issue.   My Lumia 830's details Settings > About > More InfoOS Version: 8.1.14176.243Firmware version: 02040.00012.14404.07019Settings > Extras+InfoSoftware release: Lumia DenimManufacturer name: RM-983_1001 (AT&T variant) If you compare the AT&T variant to all other variants of this device in North America, you will note that the AT&T variant IS NOT RUNNING THE CURRENT VERSION of firmware found on all the other North American Lumia 830 variants (as of 6/29/ 2015): Canada    Lumia 830Country variantDenim8.10.14234.37502040.00021.15063.02001Lumia 830Bell MobilityDenim8.10.14234.37502040.00021.15063.02001Lumia 830RogersDenim8.10.14234.37502040.00021.15063.02001Lumia 830TelusDenim8.10.14234.37502040.00021.15063.02001United States    Lumia 830Country variantDenim8.10.14234.37502040.00021.15063.02001Lumia 830AT&TNot available yetNot available yetNot available yet  Specific Problems with the Current Firmware There are at least two specific problems with the outdated firmware available on the AT&T variant. First, the Lumia Camera application does not work and second, the Netflix app will not play videos. Lumia Camera app does not work Lumia Camera is an alternate camera app from Microsoft for recent Lumia phones that provides additional features that are unique to Lumia devices. However, when you start Lumia Camera (version 2015.507.1236.978, last updated 5/13/2015), it displays an error message: UPDATE YOUR PHONE.Lumia Camera requires the Lumia Denim software update. Your phone automatically notifies you when it's available or you can check now by going to App list > Settings > Phone Update. As noted previously, the phone reports that it is running Lumia Denim under Extras+Info, but this appears to be an early, incomplete version of this firmware. Netflix will not play videos When attempting to play ANY video in the Netflix app (version 4.1.0.16, last updated 3/2/2015), you receive the following error: Whoops, something went wrong…System Configuration ErrorThere is a problem with this system's configuration that prevents Windows from playing protected video. Please make sure you have the latest Windows Updates as well as Windows 8 certified video and audio drivers installed.Error code: Q8156-887A0004 Netflix provides additional information at https://help.netflix.com/en/node/23729 which suggest trying a soft reset and ends by noting that "Microsoft will soon be sending out an update that should resolve this error." Netflix could work around the issue, but if a firmware update is expected to address it, then it's no really reasonable to expect them to do so for one model on a single carrier. Firmware fix required A number of credible sources indicate that a firmware update is needed to fix these issues. For example, a Microsoft Support Engineer noted on the Microsoft forum site that: Lumia 830 shipped with Denim already from the factory (and many of the "Denim" features, like Live Folders, were already included) - but in order to use the new Lumia Camera version, this slighly smaller software update is needed.   It looks like this issue has been known and the fix has been available on some European variants since at least February, see The UK Lumia 830 gets Lumia Camera 5 and.... a working Netflix!. Paul Thurrott also notes that "the version of Denim that shipped with the Lumia 830 was not the final version" and that that the firmware update is needed for Lumia Camera in Lumia 830 + Denim: What You Get, What You Don’t. There are also many other threads about this in the AT&T support forums such as:Full Denim release for Lumia 830?Lumia 830 Denim Firmware UpdateLumia 830 Firmware updateand (amusingly):Lumia 830 Firmware update hostage crisis continued - day 184 We live in a world where continuous delivery has become standard in software engineering and it is extremely disappointing to see that timely releases of software to maintain our devices is such a low priority for AT&T. With customers holding onto devices for only two years, it's unacceptable to leave a phone partially functional for six months or more. I have gone to some lengths to document this issue and I expect at least a similar level of effort from AT&T to try to help me and all the Lumia 830 owners experiencing these problems. Thanks in advance, Mike

    Thanks for replying. While I was half-hoping that my lengthy plea might have been the straw that broke the camel's back, I can't say I honestly expected AT&T to change their policy and suddenly start delivering more timely releases of firmware updates with greater transparency about the process. As for me, I only had a small window of time to return the handset to AT&T. Having heard nothing, I figured that the safest course of action was to buy a carrier-unlocked RM-985 from a reputable retailer. After it shows up tomorrow, I'll still have time to return the AT&T variant. With Windows Phone 10 arriving shortly, this should ensure that I get that upgrade at least a month or two before users with the AT&T branded device. I'll also be able to lower the monthly bill, so that's a big side benefit. It's unfortunate that this is how AT&T operates. I imagine that they get more than a few returns of the device from people who couldn't get Netflix working and this has to be costing them some money.  It certainly makes Windows Phone/Microsoft look bad as well, although they did ship the device with buggy firmware in the first place, even if they did provide a fix.  Supposedly with Windows 10, Microsoft will no longer be allowing carriers to block phone updates, so the situation should improve. M  

  • Lenovo Transition won't install (Miix 3-1030, Win10)

    Hi ! I recently bought a Lenovo Miix 3-1030 and updated it to Windows 10 with a fresh install.I lost all Lenovo apps and wanted to reinstall Lenovo transition. The problem is that everytime I start the setup.exe, it asks me to reboot the computer and run the .exe again. So I can't install it... Other question, I'm not sure of what this software exactly do. Currently, when I click on a text zone in "tablet mode", the keyboard does not show up by himself, I have to click on the button. Will Lenovo Tranisition do something about it ? Or should I install something else ? Thank you guys for you answers  (Sorry if there are english mistakes, strange words, english is not my mother tongue)

    I occasionally encounter this as well. When it happens I go to the Driver Matrix page for my model ThinkPad on Lenovo's support site, then download and install the update manually. That's always "fixed" the problem for me. But yes, it is annoying.
    Cheers... Dorian Hausman
    X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

  • Lenovo Update Sofware for Miix 3-830

    Hi All,
    Am looking for similar software to the THINKVANTAGE SYSTEM UPDATE for this model. Is there one?
    Able to install, but not working. 
    Thank you,

    Hallo zusammen,
    ich habe hier ein Anfrage an die Entwickler gestell und warte auf Rückinfos. 
    Eventuell steht der Fehler in Zusammenhand mit folgenden Hinweisen aus der Flash-Anleitung:
    Note1: In case that your computer had been updated BIOS with version of BCCN09WW or earlier, and you want to update it to BCCN10WW or higher, You should use intel flash utility FPT (//Anleitung?) AMI flash utility AFU will not be used.
    Note2: BIOS version of BCCN12WW or earlier does not support GUI Winflash. The BIOS does not support GUI Winflash need reference document of Flash-BIOS-SOP-V03.pptx (//nicht verlinkt?) or earlier version to flash BIOS.
    Wir halten euch auf dem Laufenden.
    Gruß - Sebastian
    → Wenn Du eine Lösung auf Deine Frage erhalten hast, markiere diese bitte als gelöst - Hilfreiche Beiträge verdienen Kudos. Zögere nicht Kudos zu vergeben.   

  • Lumia 830 Firmware update

    I bought my phone when it was released back in November of 2014 when it was advertised as receiving the full 'Denim' firmware update.  I'm still waiting for this update!  It looks like every other carrier in the world that carries this phone has pushed out the update - when will AT&T? I'm getting tired of waiting.

    Hey there
    I understand that this is a highly anticipated update!
    At this time, we do not have information regarding a software update release for the Nokia Lumia 830. Once updates are released for a device, our Software Updates page is updated with the latest software information and installation instructions!
    I hope this helps!
    Charise

  • Battery drain after win10 update

    Hi everybody! Recently updated to win10. No major issues so far. My only problem is the battery drainage. According to specifications, my laptop has a 6 hour work time when unplugged. Ever since I updated, my work time has diminished to 3hrs max. I had no problems woth my battery so far, that's why I believe that it has something to do with either Windows or drivers.  I have installed all updates from HP support assistant. I have also tampered with the power saving setting with no success.  Any suggestions? Thank you!!!

    balstaf wrote:
    Hi everybody! Recently updated to win10. No major issues so far. My only problem is the battery drainage. According to specifications, my laptop has a 6 hour work time when unplugged. Ever since I updated, my work time has diminished to 3hrs max. I had no problems woth my battery so far, that's why I believe that it has something to do with either Windows or drivers.  I have installed all updates from HP support assistant. I have also tampered with the power saving setting with no success.  Any suggestions? Thank you!!!Does your battery drain when you sleep the laptop or shut down. There is a major problem with drivers and Windows 10, because my laptop would not sleep or shut down, unless I did a hard shut down my battery would drain very easily.

  • Qosimo F10, MAT****A UJ-830S firmware Update?

    Where is the firmwhere update for the MAT****A UJ-830S drive fitted to my Qosimo F10?
    The drive wont burn at more than 1x on most media.

    Hey Austin,
    I've written a thread on UJ-830S too because mine doesn't read DUAL LAYER DVD-Rs.
    ( http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=9002&tstart=15 )
    I would be interested to know if you tried DUAL LAYER media on your UJ-830S? Can the drive read/play them OK?
    Later,
    Alcahest

  • Control zone (pinch to zoom, copying) not working since WIN10 update...

    After my update to Windows 10, my control zone is not functioning in the way it was before. The copying of text on browsers, zooms in the page and I can't pinch to zoom like I could before....Any assistance would be greatly appreciated as I use my envy for work and school ;c ThanksJen

    After my update to Windows 10, my control zone is not functioning in the way it was before. The copying of text on browsers, zooms in the page and I can't pinch to zoom like I could before....Any assistance would be greatly appreciated as I use my envy for work and school ;c ThanksJen

  • Error 0x80070490 on Win10 Update

    I have HP Envy Ultrabook 4.  Trying to update from Win 8.1 to Win 10.  PC hangs at Windows Update screen.  Nothing happens.  to "Run as Administrator" I went to Control Panel, Sykstem & Support, Windows Update Support- This step is important- click "ADVANCED" to choose "Run as Administrator"   Only when I clicked Advanced and Clicked Run as Administrator would routine run to Fix problems with Windows Update.  Now Win 10 download is running and Windows Update screen shows continuour progress  

    Hi , Welcome to the HP Forums! I understand that you are getting the Error 0x80070490 on Windwos 10 Update. I am happy to look into this for you!  Please try our, HP Print and Scan Doctor program, and let me know what happens! Also, this post, windows 10 update problems; Error 0x80070490, may help as well.  Hope this is helpful, and have a nice day!  “Please click the Thumbs up icon below to thank me for responding.”

  • Miix 3 Windows 10 update - Display rotation

    I completly reinstall my tablet and install all drivers from support. Now in the notification center has appeard new icon for screen rotation lock but stil not rotation ! 

    First of, did you reboot after running .reg file?It is related to .reg registry file, yes.I have Miix3 830  with 8" display, maybe you have 10" version?You can just edit that .reg file with notepad, run it and reboot so it could take effect.It is related to how accelerometer chip is attached to motherboard, so mine is like it was ment to be, this is as far as I could figure it out!So it should look like this, but maybe I'm wrong...First two values are for turn left= 01 01  - maybe 00 01 is for chip that is on the back of the motherboard...etc...Third and fourth value is start position 00 00Fift and sixth values are for turn right 01 01Seventh 02 is for 180 degrees - upside down...

  • MIIX 3 Windows 10 Update

    I've just attempted to install the Windows 10 Update.I'm now stuck in loop showing "Restore previous version on Windows.It's been like this for over 5 hours.How can I restore the machine?

    Have you tried turning it off then booting by holding the power and volume up buttons? The manual says this should boot the "Novo menu" allowing you to restore the machine to it's original state.

  • How to activate the accelerometer after windows 10 upgrade for lenovo miix 3 830

    Device manager-> on the menu bar select action-> add legacy hardware-> on the install shield window select next-> select "install hardware that I manually select from a list"-> next select "sensors" -> choose kionix as manufacturer and install kionix fusion sensor driver-> then you will have new section in device manager called sensors. There will be two devices. Kionix fusion sensor device and SDO sensor v2. Right click over SDO sensor v2 and select update driver. Choose "browse my computer…..". Then choose " let me pick from the list…..". Remove the check on the "show compatible hardware ". Select Microsoft as manufacturer and then select the first driver called " fusion sensor v2". Click next. On the confirmation window select "yes" and next close the window. At the end you must have fusion sensor v2 device installed beside kionix fusion sensor driver under sensors section in device manager. Restart the system an you are done. Accelerometer works fine again.

    If this thing work YOU ROCK!!!I just reseted **bleep** thing for the fifth time...

Maybe you are looking for