Miix 3 does not show battery status in Taskbar

Hi,
I own a new Miix 3 that works w/o problems. But it does not show the current battery status in the task bar or anywhere else. I checked windows' Device manager. There is no battery listed, only the external power device. I assume Windows 8.1 does not recognize the tablets' battery or the driver is missing. It seems the software/drivers is up to date.
Does anyone else have the same problem or see a solution for that problem?
Thanks in advance,
Kauzi

Being able to see at a glance which files are checked out/by whom below each thumbnail would be infinitely valuable, and is therefore not an option in Bridge Thumbnail Preferences. :)
If you enable Tooltips in Thumbnail Preferences, the Vc status is shown there, but one still must click or hover over each and every file to get the real Vc status. And of course, as you pointed out, the Vc status is always available for individual files in the Inspector Panel.

Similar Messages

  • Bridge does not show VC status in Thumbnail

    Hi,
    since migrating to a new laptop, Bridge CS3 does not show the VersionCue status icons under the thumbnail, only in the inspector panel. I cannot find any hint in the docs how to get the status icons shown again. Any ideas?
    Cheers
    Thomas

    Being able to see at a glance which files are checked out/by whom below each thumbnail would be infinitely valuable, and is therefore not an option in Bridge Thumbnail Preferences. :)
    If you enable Tooltips in Thumbnail Preferences, the Vc status is shown there, but one still must click or hover over each and every file to get the real Vc status. And of course, as you pointed out, the Vc status is always available for individual files in the Inspector Panel.

  • Firefox 21 does not show start menu and taskbar sub-links of new tab,private window

    Firefox does not show start menu icon 's submenu containing links to new tab,new window and new private window.Same happens with taskbar pinned shortcut. It does not show the above three options when I right click on it. I have installed Firefox stable,beta,aurora and nightly at the same time.All the four use different profiles.I have this setup since Firefox 12.There was no problem before v21.I tried reinstalling all the four.Resetting the stable version profile.The options do appear in othe ruser accounts.I want this option for stable version only.I think these are not available for testing versions.I tried all the suggestions in this thread:
    https://support.mozilla.org/en-US/questions/943198
    I am on Windows 7 64 bit.

    You may be experiencing this Windows 7 bug:
    * [https://bugzilla.mozilla.org/show_bug.cgi?id=870529 bug 870529] - Windows jumplist not showing anymore
    <i>Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i>

  • OEM 12c  Agent does not show down status.

    Hi, I'm testing EM 12c. I added host target to oem and then kill agent process on host.
    When open agent page (Setup-Agent-Testingagent) see error.
    Communication between the Oracle Management Service host to the Agent host is unavailable. Any functions or displayed information requiring this communication link will be unavailable. For example: deleting/configuring targets, uploading metric data, or displaying Agent home page information such as Agent to Management Service Response Time (ms).
    But status agent and host show up in EM.
    I try resync agent, But nothing has changed it.
    ./emctl status agent
    Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0
    Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
    Agent is Not Running
    Other target (hosts,agent) show status correctly.
    Thanks for help.

    EM is showing Host is up makes sense. If I remember correct the OMS pings the host if the agent is down. This will succeed so the host will show up.
    Why the agent is showing up does not make sense to me. The agent sends a signal every (default) 120 seconds. If no signal is received by the OMS the OMS sends a reverse ping to the agent. If this does not succeed the agent and its monitored targets should get the state “Agent Unreachable”.
    Eric

  • App Store does not show download status.

    Hi There,
    in need a bit of help.. apparently, the App store on my macbook pro does not sure any download status for the apps i download. However, i do see a growing bar on my dock for the app i am downloading.
    Is there any way i can get it to show?

    If you are currently downloading any app and you just lost the status bar from the launchpad which shows apps on your mac with a large overlaying icon app, just try to download any free app (games or utility etc) from the app store and install it, it will bring you back to the window of the launchpad where you can see the status of your downloads....you will notice that I was downloading the Mavericks OS but the download status wont show up on the app store..you will see the status instead on the launchpad, I am using Lion 10.7.5 so I do not have the launchpad icon on my DOCK, maybe I am also just missing the shortcut to launch it. I just discovered that when you install another app from the app store it will bring you this window back, by clicking on the currently downloading app, it will pause the download and will proceed with the other app to finish its process....
    I hope this would help.....by the way, with my macbook pro 10.8.5, download status is present on the app store when I was downloading the Mavericks a while ago....

  • Top right battery icon does not show battery usage

    So over the weekend I did not charge my iPhone, because the icon always said I had full battery life. I believed it because I never made a call, listened to music/video or surfed the net. It basically stayed in sleep in my pocket both days.
    I get to work monday, pull it out to listen to music and I get the full screen battery icon showing the battery is dead with the plug and lightning bolt icons under it, then it turns off on its own. If I turn it on again, same deal.
    I get home, hook it up to my PC and charge it, it works fine.
    Today i've been listening to the iPod all day and surfing the net on EDGE and the battery icon in the top right shows full battery. To test I turned WIFI on for the past few hours to check and it's still showing full battery.
    Basically just the battery icon in the top right isn't recognizing the battery being used. My Usage stats in Settings are also blank for Time Since Last Full Charge.
    Background info:
    Refurbished iPhone bought directly from ATT, came with 1.1.1, immediatly upgraded to 1.1.4
    I've tried hard reboots.
    I keep push e-mail and WiFi off at all times. WiFi comes on very rarely and only for short amounts of time.
    I keep the phone connected to my PC overnight, but the PC does not go into any sort of sleep mode(ruling out not charging overnight)
    I'm going to go home tonight and restore the phone to see if that helps, but I wanted to see if this is hardware related or software. This just started this weekend and i've had the phone for a few weeks now, and other than some short battery life at the beginning when I would keep wifi and push e-mail on a lot, or the random Safari closings, no other issues.
    Message was edited by: D0rk4L

    DOrk4L,
    Have you tried re-calibrating the battery? To re-calibrate it, let the battery drain completely and then charge it fully. You should see correct battery usage after that.
    Hope this helps,
    Jennifer B.

  • [For M5000 Server] prtidiag -v does not show enviromental status

    In our M5000 server we cant not see environmental info in *'prtdiag -v'* output.
    But in our V890 we can see environmental status
    Can anyone help me how to turn on environmental info for this server?
    Case M5000:
    #prtdiag -v
    (output ommited)
    =================== Environmental Status ===================
    Mode switch is in LOCK mode
    =================== System Processor Mode ===================
    SPARC64-VII mode
    Case V890:
    #prtdiag -v
    (output ommited)
    =============== Environmental Status ====================
    System Temperatures (Celsius):
    ========================
    Device Temperature Status
    ========================
    CPU0 74 OK
    CPU1 61 OK
    CPU2 62 OK
    CPU3 60 OK
    CPU4 68 OK
    CPU5 74 OK
    CPU6 69 OK
    CPU7 73 OK
    MB 33 OK
    IOB 27 OK
    DBP0 26 OK
    ===================
    Front Status Panel:
    ====================
    Keyswitch position: LOCKED
    System LED Status:
    GEN FAULT REMOVE
    [OFF] [OFF]
    DISK FAULT POWER FAULT
    [OFF] [OFF]
    LEFT THERMAL FAULT RIGHT THERMAL FAULT
    [OFF] [OFF]
    LEFT DOOR RIGHT DOOR
    [OFF] [OFF]
    (output ommited)

    Hi.
    You can't monitor environment for M5000 from Solaris.
    You need use XSCF for do it.
    As hook:
    Generaly you have DSCP network between Solaris and XSCF.
    You can create user on XSCF with limited permissions, put ssh key for login as this user from Solaris to XSCF without password prompt.
    After this you can use command like:
    ssh env_user@xscf_name environment
    For more available commands on XSCF - read Docs.
    Regards.

  • GL posting clearing item amount and do not show doc status on the header

    Hello,
    GL post clearing amount both side and increase the no of items in the GL balance display. Inaddition, these clearing line item document header does not show document status field.  I have another GL which does not post extra two lines and clearing item document is empty and header shows document status as A (cleared item).
    Could you let me know what the difference and what need to be changed to make it not to post clearing items + and - and show doc status.
    Both are same FSG and only difference tick mark not done for balance in local currency.

    Thanks for your reply...but thats did not work. As I said earlier, I have a Structure in my rows and 2 characteristics in my free chracteristics and in my columns I have a selection of key figures...
    What I want is when I drill down on one of my 2 free characteristics, I do not want to see rows with amounts (KFs) zero or space.
    RR

  • Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes.

    Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes, have tried restore mode & DFU mode. Bad battery or port?

    iPhone not appearing in iTunes

  • I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

    I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

    http://support.apple.com/kb/TS1591
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • EH4 Completed - System Status does not show any info

    Hi All,
    I have completed the EHP4 installation on one of our ECC 6.0 system and now when i login to SAP and click on System -- Status
    it jus shows me that it is ECC 6.0 ,It does not show me ECC 6.0 EHP4 , do i need to do anything after EHP installation is over?
    Regards,
    Ershad Ahmed

    Hi Marko,
    Thanks for the reply . I checked and found that our SAP_APPL is on 604. I had another question during EHP4 application
    we had to increase the DB size. Before i started the EHP when i took the DB backup our DB size was 83 GB and now when
    i check it is 135 GB, is it possible for us to recliam this space. The only option which i can think of is DB Reorganization but was
    not very sure. Any inputs would be of great help.
    Regards,
    Ershad Ahmed

  • I ordered at around 12:30AM pacific and it does not show in my order history.  When I look it up on the order status page, it just says "received and processing".  Do I have any chance of getting it on friday?

    I ordered at around 12:30AM pacific and it does not show in my order history.  When I look it up on the order status page, it just says "received and processing".  Do I have any chance of getting it on friday?

    It seems to depend on a variety of different things.
    Verizon appears to be going by the process time of orders, and not the order time of orders.  Your process time will be the timestamp on your confirmation email.
    It also depends on which model, GB, and color you ordered.  The 6+ were in high demand and low supply.
    It also depends on which warehouse (order location) your order was being processed through.  Verizon reps have told me that some warehouses have more of certain phones than others, and if your order went to a warehouse that doesn't have enough of that particular phone then you are SOL and will have to back for a backdated order.
    There is a possibility you will get it, but if you ordered any of the 6+ models, then it is unlikely.

  • My wife ran the battery down in her shuffle.  When I plug it in to the wall or computer, it will blink red solid for about 3 seconds and then shut off.  Is the battery that dead, or is something else wrong.  ITunes does not show the shuffle

    My wife ran the battery down in her shuffle.  When I plug it in to the wall or computer, it will blink red solid for about 3 seconds and then shut off.  Is the battery that dead, or is something else wrong.  ITunes does not show the shuffle

    Hi Jennsman40,
    Welcome to Apple Support Communities.
    If this symptom persists even after you charge your iPod Shuffle, see this page for some troubleshooting steps:
    http://www.apple.com/support/ipodshuffle/assistant/itunes/
    Best,
    Jeremy

  • Reply/forward to a message from iPhone, Outlook does not show status

    If you reply to a message from iPhone, Outlook does not show status (if replied or forwarded the message). The iPhone indicates the reply/forward icon however in Outlook I would have no idea if I responded to that message.

    You're right. Had not noticed it before. Hopefully Apple will fix this in one of their future releases.

  • Adobe bungled the LR CC update. Download does not show % status. Worse...

    Adobe bungled the LR CC update. Download does not show % status. Worse, getting from LR download is funky. Too many hoops from Lightroom update. #SMH

    So glad I did not download LR CC, With all the problems with CC I'm thinking I won't renew, just go back to using LR5 and Photoshop CS6.

Maybe you are looking for