Miles/Km configuration with different rate in a month
Experts,
I have requirent for mileage rate for one of my client as below -
In month an employee claim km/mileage for reimbrushment and intial the reate for initial 1500km is $2 and above 1500km i would be $1.
So an employee can get $2 of rate only for 1500km everymonth.
Please suggest me how to prceed with this.
Thanks in advance
Regards,
P.S
Hi there
If you refer to the IMG
In Customizing for Travel Management under Travel Expenses
> Master Data >Travel Expense types > Create Travel Expense Types for Per Diems/Flat Rates
here you have the possibility to define different flat rate costs per expense type, The documentation from the IMG will give more information but please give consideration as to whether VAT needs to be included etc also or calculated as tax free depending on country statutory requirements, table V_T706F will be relevant for this activity.
I hope this helps.
Similar Messages
-
One Planning server configured with different BI server
Hello Everyone,
I have a Planning server configured with BI workspace (Hyperion 9.3.1). There are 5 Planning applications already running smoothly.
Can I have another BI server pointing to the same Planning server? Now I want one more Planning application on the same Planning server but different BI server.
If its possible, won't it affect the other applications already present in the Planning server?
Is it possible. Your prompt response would be appreciated.
ThanksHi All,
Thank you very much for the response....Had not been keeping well, so was unable to follow the forum....
The fact is the current BI server is on 9.3.1 and Planning server is also on 9.3.1, in which I have 5 apps that are running smoothly....
I have one more instance of Hyperion Planning application which is on version 3.5.1 and I need to upgrade it to 9.3.1. It would have been a smooth process if I would have just migrated it in the current set up. But we have a constraint here. The BI server is loaded and hence I can't have one more application configured on it. And also the apps belong to different departments. So they want a distinct BI server for this one single app.
So, I have been asked to use a different BI server for workspace and reporting needs, and the existing Planning server(which is 9.3.1) for the Planning application.
Kindly suggest me what should be my approach.
Thanks -
How to read frequency channel & voltage channels at the same time with different rates?
I am using a DAQCARD 6036E with a SCXI-1000 chassis. I have a SCXI-1100 & a SCXI-1126 modules, along with a SCXI-1124 AO module for voltage output. I am acquiring several voltage input channels with the SCXI-1100 & one frequency channel (frequency signal upto 12000Hz) with the SCXI-1126. I want to configure all the channels in the Measurement & Automation so that I can use the Scale function to setup all the channels. I am using a higher acquisition rate for the frequency channel than the voltage channels. I had the block diagram as attached. When I run the vi, I had the resource problem. The err. msg. is: the specified resource is reserved.. Any suggestions as how to acquire a frequency signal & several voltage signals with this system setup using the DAQ-mx?
Attachments:
Document.rtf 4727 KBSince a common ADC is shared with all your SCXI analog input channels , you will have to sample all channels in a scan list at same sampling rate.
However, you can set up frequency and voltage virtual channels using different instances of "create DAQmx Virtual channel" function in the same task as shown in attached pic, set scan rate and read them using a single DAQmx read
Attachments:
vi.PNG 6 KB -
Problme in http server configuration with different database version
I have two instances of oracle databases on two different machines.
1. Oracle 9i R 2 with default http server
2. Oracle 10 g with http server of Oracle 10 g AS.
Now the problem is that when i want to cross configure the http servers that is to configure http server of 9i R 2 data base with the 10g data base or vice versa. It give the following error.
Can not run. Capacity probem.................
Plz tell me that is there any pronle in these configuration. Is it possible to configure 9i http server with 10 g data base and vice versa If yes then why I am getting errors???The entries of the log file are as under:
Tue Aug 07 05:00:29 2007] [error] [client 10.8.7.33] [ecid: 1186444829:10.8.7.33:1968:7060:109,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:05:29 2007] [error] [client 10.8.7.33] [ecid: 1186445129:10.8.7.33:1968:7016:114,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:10:29 2007] [error] [client 10.8.7.33] [ecid: 1186445429:10.8.7.33:1968:7528:90,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:15:29 2007] [error] [client 10.8.7.33] [ecid: 1186445729:10.8.7.33:1968:5872:128,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:20:29 2007] [error] [client 10.8.7.33] [ecid: 1186446029:10.8.7.33:1968:2468:95,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:25:29 2007] [error] [client 10.8.7.33] [ecid: 1186446329:10.8.7.33:1968:7236:136,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:30:29 2007] [error] [client 10.8.7.33] [ecid: 1186446629:10.8.7.33:1968:536:116,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:35:29 2007] [error] [client 10.8.7.33] [ecid: 1186446929:10.8.7.33:1968:3556:108,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:40:29 2007] [error] [client 10.8.7.33] [ecid: 1186447229:10.8.7.33:1968:6920:132,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:45:29 2007] [error] [client 10.8.7.33] [ecid: 1186447529:10.8.7.33:1968:7536:119,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:50:29 2007] [error] [client 10.8.7.33] [ecid: 1186447829:10.8.7.33:1968:5108:76,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:55:29 2007] [error] [client 10.8.7.33] [ecid: 1186448129:10.8.7.33:1968:668:121,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:00:29 2007] [error] [client 10.8.7.33] [ecid: 1186448429:10.8.7.33:1968:6640:129,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:05:29 2007] [error] [client 10.8.7.33] [ecid: 1186448729:10.8.7.33:1968:7324:123,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:10:29 2007] [error] [client 10.8.7.33] [ecid: 1186449029:10.8.7.33:1968:2168:81,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:15:29 2007] [error] [client 10.8.7.33] [ecid: 1186449329:10.8.7.33:1968:2320:166,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:20:29 2007] [error] [client 10.8.7.33] [ecid: 1186449629:10.8.7.33:1968:7320:114,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:25:29 2007] [error] [client 10.8.7.33] [ecid: 1186449929:10.8.7.33:1968:7528:96,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:30:29 2007] [error] [client 10.8.7.33] [ecid: 1186450229:10.8.7.33:1968:7580:124,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:35:29 2007] [error] [client 10.8.7.33] [ecid: 1186450529:10.8.7.33:1968:668:124,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p -
Inflation with different rates per year
what am I doing wrong here
trying to get compound inflation for 20yrs (starting at 2001) where the inflation rate increases each year.
I'm missing something basic my inflated amt is coming up null when I use
inflated_amt[iteration_number + 1 ] = inflated_amt[iteration_number] * (1 + inflation_rt[cv()])
if I change it to
inflated_amt[iteration_number + 2 ] = inflated_amt[iteration_number + 1] * (1 + inflation_rt[cv()])
I'm close but I'm missing my first year (2001)
anyway here is my query
with
inflation_table as
(select level j, level + 2000 yr, level * .01 inflation_rt
from dual
connect by level < 21),
base_amount_table as
( select level * 10 base_amt from dual connect by level < 3)
select yr, inflation_rt, base_amt, inflated_amt
from inflation_table, base_amount_table
model return updated rows
partition by (base_amt)
dimension by (j)
measures (inflation_rt, yr, base_amt inflated_amt)
rules iterate (20)
inflated_amt[iteration_number + 1 ] = inflated_amt[iteration_number] * (1 + inflation_rt[cv()])
Edited by: pollywog on Mar 25, 2010 12:51 PMActually, you probably need this:
with inflation_table as (
select level j,
level + 2000 yr,
level * .01 inflation_rt
from dual
connect by level < 21
base_amount_table as (
select level * 10 base_amt
from dual
connect by level < 3
select yr,
inflation_rt,
base_amt,
inflated_amt
from inflation_table,
base_amount_table
model
partition by(base_amt)
dimension by(j)
measures(inflation_rt,yr,base_amt inflated_amt)
rules
inflated_amt[1] = inflated_amt[cv()] * (1 + inflation_rt[cv()]),
inflated_amt[j > 1] order by j = inflated_amt[cv() - 1] * (1 + inflation_rt[cv()])
YR INFLATION_RT BASE_AMT INFLATED_AMT
2001 .01 20 20.2
2002 .02 20 20.604
2003 .03 20 21.22212
2004 .04 20 22.0710048
2005 .05 20 23.174555
2006 .06 20 24.5650283
2007 .07 20 26.2845803
2008 .08 20 28.3873468
2009 .09 20 30.942208
2010 .1 20 34.0364288
2011 .11 20 37.7804359
YR INFLATION_RT BASE_AMT INFLATED_AMT
2012 .12 20 42.3140882
2013 .13 20 47.8149197
2014 .14 20 54.5090085
2015 .15 20 62.6853597
2016 .16 20 72.7150173
2017 .17 20 85.0765702
2018 .18 20 100.390353
2019 .19 20 119.46452
2020 .2 20 143.357424
2001 .01 10 10.1
2002 .02 10 10.302
YR INFLATION_RT BASE_AMT INFLATED_AMT
2003 .03 10 10.61106
2004 .04 10 11.0355024
2005 .05 10 11.5872775
2006 .06 10 12.2825142
2007 .07 10 13.1422902
2008 .08 10 14.1936734
2009 .09 10 15.471104
2010 .1 10 17.0182144
2011 .11 10 18.890218
2012 .12 10 21.1570441
2013 .13 10 23.9074598
YR INFLATION_RT BASE_AMT INFLATED_AMT
2014 .14 10 27.2545042
2015 .15 10 31.3426799
2016 .16 10 36.3575086
2017 .17 10 42.5382851
2018 .18 10 50.1951764
2019 .19 10 59.73226
2020 .2 10 71.6787119
40 rows selected.
SQL> SY.
Edited by: Solomon Yakobson on Mar 25, 2010 1:12 PM -
Government Securities with different Interest Coupon Rates
Government Securities with different Interest Coupon Rates
For example, Company acquires government securities with fixed interest frequency but different interest rates
Government Securities – 7% Maturity Period 1 year
Government Securities -8% Maturity Period 2 years
Government Securities 9% Maturity Period 3 years
How to configure the above requirementDear Krishna,
You can fulfill all your requirement with product type 04 series will be helpful.
There is no specific customization required in case you are using standard system.
Regards,
Jain -
I wonder if it is possible to use 1 Computer (Macbook Pro)
- configured with 2 (ore even more) user accounts (i.e. me + my kid)
- and each user account has a different Apple-ID (account) for iTunes purchases & iTunes authorization ?
I woud think that is fine in terms of the underlying license agreement refereing to re-download purchased movies, shows, apps, etc.
However, it seams that there is that miraculous 90 days restriction, which I don't understand, and which allows me only to "authorise" the Computer under one or the other account. The switch is unfortunatelly only possible every 90 days ?!?
Thanks anybody for help
OliverThe 90 day association doesn't stop you authorising an account, it only stops you from using another account for iTunes Match or automatic downloads or redownloading its past purchases : http://support.apple.com/kb/HT4627
There are a few methods listed on this page for how you could do it e.g. multiple user acounts, same iTunes but you having separate playlists, separate iTunes libraries : http://support.apple.com/kb/HT1495 -
How can I edit multiple clips with different frame rates on the same timeline
how can I edit multiple clips with different frame rates on the same timeline
You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x -
How can I record several channels of data at different rates with the same card?
I am building an application in which I need to record several channels of DC voltage data to disk at different rates, for example, Channel 1 at 40 Hz, Channels 3-5 at 10 Hz, Channels 6-8 at 1 Hz, etc.
All these channels are time-referenced, so I need to make sure data for channels recorded at slower rates line up with their correct time stamp.
Currently, I am building all data into a 2D array one row per loop iteration.Hello;
At this time, the NI DAQ boards have only one scan clock, so, you can only define one valid scan rate for all of your channels.
The better approach for you is to sample all channels at the highest rate you will need, and then discard the samples you don't need to save.
Hope this helps.
Filipe -
In Apple Configurator, can I set up different sets of iPads with different apps loaded? Or will all iPads synced with Configurator be required to have the same build?
Hi jshira86,
You can definitely have different sets of iPads with different apps loaded. When you "supervise" your iPads, you will see that on the left side of the Configurator window there is a "+" sign in the lower left corner. Click it to create a new device group. With this new device group you can choose what apps and configuration profiles you want to install on that group of iPads. Create as many groups as you want to customize the apps and profiles you want on them.
Hope this answers your question!
~Joe -
I have to configure an application based on Oracle Portal 3.0.9 with different domain names, for example: myappl.domain.com for certain internet users and myappl.domain.br for Brasilian internet users.
Can I configure the Portal in the right way ? It should reply to http://myappl.domain.com requests by generating all its url with this first part of name and it should reply to http://myappl.domain.br requests for other users, keeping all its generated urls with the correct first part of name.The easiest way to provide search on just pages (not content areas) would be to crawl portal pages just like static pages. We have search partners on http://portalcatalog.oracle.com/ that can help you w/ this.
-
GR & GR cancellation value is differing with exchange rate
Hi experts,
Here a challenging issue. I was raised a Thirdparty PO and I did GR(a special case) and I did IR also
Due to some reasons I have to cancel the IR the below are the differences
for 64 pieces value is 21,339.97 CAD
and if i reverse(credit memo)for same qty valule is 21,592.29 CAD ok
now i am going to GR DOC for 100 qty value is 38,347.89 CAD
for the same reversal value is 33,946.63- why these differences is coming any one can have the idea? My vendor currency is EUR and Co code currency is CAD. I Went through OB08
also but there is no use. U please suggest me any config things i was left.
Thanks
SRThe system behaviour you are describing is the correct one. Please,
kindly consider the information contained under the attached note:
191927 - Posting logic: GR for foreign currency PO.
As stated in it:
Postings to the material stock account (BSX):
In order to be able to determine the value of the stock posting, the
valuation methods which exist in the material master in local currency
(standard price, total value of stock) must be converted into document
currency. This translation is thus carried out on the posting date with
the exchange rate type that is assigned to the FI document type used,
that is, independent from the exchange rate defined in the purchase
order!
If no exchange rate type is assigned to an FI document type, the system
uses exchange rate type M.
Please, check in your system the settings stored in the customizing
transaction OBF4 for the document type WE (Goods receipt). If the field
'Exch.Rate Type for foreign currency documents' is empty, the exchange
rate type M is used.
The fixed conversion rate in the purchase order refers to the valuation
approach in the purchase order and, therefore, to the costs for the
purchased material. Therefore, the posting amount to the GR/IR clearing
account (WRX) is converted according to the fixed conversion rate in the
purchase order header.
On the other side the fixed conversion rate in the purchase order is not
designed for converting the posting values to the material stock account
(BSX). This conversion reflects the situation of the valuation of the
material stock and is therefore designed to be independent of the
conversion rate defined in the purchase order. This is what note 191927
outlines.
Therefore, in the standard system behaviour, the cancellation does not
really recalculate the currency translation, but uses the Purchase
Order history instead:
.- If there was only one Goods Receipt, the WRX is supposed to be the
the same for 102 as it was for 101.
.- If there were several Goods Receipts with different exchange rate
values, then, the WRX for the 102 will be done with the average
value, just as the also attached note 49995 describes.
The currency translation for the stock value is done within the MM-IM
function pool MBGB (MB_CALCULATE_VALUES etc.). It is always done using
currency type M and the posting date. We never use another date or
rate there.
Hope the information help. -
What's the best way to sample multiple AI's with different sampling rates under one task?
I'm using a PCI-6221 card and CVI 7.1.
I have a tri-axis vibration sensor and two other pressure transducers.
I want to take 10k samples from each vibration axis at 80 kHz. This is
possible by configuring the scan rate of the "vibration task" to 240
kHz. (The card maximum is 250 kHz).
I want to take 1k samples from each pressure transducer at 250 kHz. This happens very infrequently.
Each measurement is required by a separate task.
I thought I could do this by setting up three finite tasks (1
vibration, 2 pressure), but DAQmx won't let me run more than one AI
task at a time. I've read other posts here, and I realize I have to
add/remove physical channels on-demand.
What is the best way to optimize this setup so that I'm not hogging up system resources?
Should I do the following?
1. Stop the task
2. Remove the vibration channels from the task
3. Add in a pressure channel
4. Configure the pressure channel
5. Start the task
6. Take the pressure samples
7. Stop the task
8. Remove the pressure channel from the task
9. Add in the vibration channels
10. Configure the vibration channels
11. Start the task
Also, the vibration portion is running in finite mode, but I'm looping
it. Should I switch it to continuous and run the "DAQmxReadAnalogF64"
to sample the latest 10k samples. (If the task is continuous, would I
pull the latest 10k samples, or would I pull some old buffered samples
instead?)
Thank you,
NobodyHello Nobody,
If you configure your task timing to acquire a finite number of
samples, then you can only read the number of samples that you
specified in your configuration. Once you try to read more
samples, you will receive the error you are seeing.
If you configure your task timing for continuous acquisition,k then you
can read samples indefinitely. Any given DAQmx Read will read the
oldest unread samples in the buffer.
If you are going to be switching between different tasks, you will definitely need to stop one before you start the other one.
I hope this helps!
Eric
DE For Life! -
Acquire 2 signals with different sampling rate?
Hello,
i am using first time labview signal express together with a NI pci 6251 & NI Scc 68 device.
There are 2 signals I wish to acquire over a 2 week time period. They should be saved in several tdms files. One is a dc Voltage.(sampling rate 100Hz) The second is voltage given by an acceleration Sensor. (sampling rate 4kHz)
When I try to acquire them I couldn't figure out how to set the sampling rate for each signal, only for all signals.
When I created two DAQmx assistant acquire tabs. An error occurs always: "the specified resource is reserved".
So my question is is it possible to do this?hello markus_umd,
no, it is not possible to create different samplingrates for individual channels on one daq device.
if you want to record one channel slower, you must reduce the samples for that channel in your program.
if the channels have a common divisor, you could implement your task. you find more information here:
Sampling Different Channels at Different Rates with NI-DAQmx
kind regards,
robert h
NI germany -
What is the best way to deal with different audio sample rates on the same timeline ?
what is the best way to deal with different audio sample rates on the same timeline ?
You don't have to do anything special. If possible, start your project with a clip that has the desired target frame rate and audio sample rate, and your project parameters will be set automatically. Other sample rates will be converted under the covers.
For example, if your video is shot at 48khz, you can add music files at 44.1khz with no problem.
If you are recording audio that you want to synch with video (multicam), you will get best results if everything is 48khz, but you can use 44.1 if that is all you have. Once I forgot to reset my Zoom to 48,000 and it still worked.
Maybe you are looking for
-
How can I avoid refnum no longer valid?
Was hoping someone may have a suggestion...I mentioned previously I use VI scripting to create a bunch of controls and indicators from a text file. Along with that, it stores a reference number for each control in an array. I copy these controls/in
-
When I upgraded to OS X 10.9.1 Everything got synced in very well. But a few days later when automatic apdates were completed, all my saved notes were erased(very important personal information and passwords). I couldn't restore them back. I can you
-
File download works in Firefox but not IE
Hi All, I have the code below, fds = new FileDataSource(fileName); response.setContentType("text/html;charset=UNICODE"); response.setHeader("Cache-Control","public"); response.setHeader("Content-Disposition", "attachment; filename=\"" + fds.getName()
-
Localized Data Model Message Bundle
When you use the Validations in the Entity Objects of a data model and you place text for the text, errors, etc...it creates a MsgBundle for that class. Then for other languages you can create additional message bundle (e.g. MsgBundle_it, for italian
-
I am using Numbers and have set my document to landscape in both the tool bar and the inspector, but it still prints portrait... I have updated to latest Numbers, ditched prefs file and still can't print in landscape. I have tried two different print