Milestone Creation from Cprojects in ECC 6

Hi,
I would like to create Milestone in ECC 6 from Cprojects. Iam using Multi level controlling using WBS elements with task based Accounting Integration.
Best Regards,
Joseph.
[email protected]

I do agree that Task in the Cprojects are created as WBS elements in Multi Level Controlling. But can the automatic transfer from task to WBS element, happen with milestones for WBS elements...
Is there any standard way of creating WBS Element Milestone during automatic transfer of Cprojects Task to WBS element in ECC 6.0 system.
Best Regards,
Joseph.
[email protected]

Similar Messages

Vendor creation from ROS to ECC

Hi ,
I have to create vendor from ROS client to ECC with the financial details . Is there any BAPI available for that.
Regards
Raul

Hi Raul,
We are also using SUS and our ROS client is the same as our SUS client. Hence after the purchaser in SRM has accepted the suppliers who have been registered in ROS, these suppliers are pushed to SUS (same as ROS) and their status changes to released.
We have a very complex situation/requirement from client and there are approval cycles before a vendor is created in ECC. This will not be of any use to you.
However I can help you out with your requirment.
Enhance the SRMSUS BSP page to include tax and financial detail fields and force the supplier to fill these fields when he is pushed into SUS by the Purchaser in SRM. Once the supplier saves this information, use an RFC program call to create a vendor in ECC with these details.
Regards,
Nikhil

Creation of WBSE in SAP-PS from all Phase of Project from cProjects

Hi,
Need suggestion for the automatic creation of WBSE in SAP-PS from each phase of Projects from cProjects i.e. multi level controlling scenario
I have done the required configuration of Define Controlling Scenario where for the project type, controlling method has given (Multilevel Controlling (Structure Element, Automatic).
But in my case only one WBSE is getting created for all phse s & project defintion of project in cProjects.
Request you to suggest me on this issue.
Regards,
Ranjan

Hi Vetrivel,
Thanks for your prompt response. These are settings made for multi level controlling scenarios.
1. Project Type:
Accounting Intergation-accounting integration in my SAP ERP, as of relese of the project
2. Define Object Links for Accounting Integration
- 0FIN_INT_ERP_PS Single-Obj. Controlling on WBS Elements
- Search Fields OLR3_TS_PRPS_SHLP
- Proxy Class CL_DPR_OLR3_WBSELEMENT
- 0FRAME9 frame has considered
3. Controlling
- Controlling Scenarios: PS01 Costing Variant
- Then Costing Model has assigned to Controlling Scenarios
- Assignment of Cost Elements to Cost / Revenue rate
Please suggest me if i have missed some things. I am checking the planed cost in CN41 transaction of the PS module. Morever in Project in cProjects costing button is disabled & while doing calculate no planned cost os updating in Projects.
I am following role based costing process. Project Role has defined & employee assiged to Projects.
Thank you in advance.
Regards,
Ranjan

Creation of cProjects automatically from creation of Portfolio Item in xRPM

Hi,
If we check out the box for the automatic creation of cProject along with creation of Portfolio item then the cProject as well as an internal order is created in the system.
While I am creating an item and selecting for automatic creation, I am not able to get the internal order and not even the corresponding cProjects.
Help please !!
Regards,
Nishit

Hello,
I am looking for a cProjects knowledge resource to start after a brief demo or just discussion on how cProjects would be implemented at out site. The company is a Global chemical company and we know we want cProjects but need more info before we get started. We are looking for a resource willing to provide this info. This is for an 18 month project. Work can be done remotely.
Jan Valeriano
jan.valeriano @ els-it. com
215 668 - 3854
ASAP
Thanks
jv
+

SPL block at PO in GTS - GR creation is allowing in ECC

Hi All,
SPL functionality is working fine for SD cycly but not for MM cycle.
SD process: Sales order created, blocked in GTS automatically. When we try to create delivery in ECC before releasing order in GTS, the system showing error. That means delivery can not be created, fine.
MM process: Purchase order created and blocked in GTS automatically. But Goods recipt creation is allowed in ECC before releasing the SPL block in GTS for that PO.
In SD process we have assigned 911 routine in copy control from order to delivery to stop delivery creation for blocked sales order.
Same way do we have any user exit or routines for stopping GR creation for blocked PO's.
Please let us know your ideas.
Regards,
Lakshmikanth

Hi Lakshmikanth,
Can you please explain , how did you prevent system to create Delivery for Blocked PO?
we have similar requirement for the client.
Regards
Mayank

Save text in a PO during creation from APO

Hi All,
I need to save SO text in PO during PO creation from APO.
I am using the BADI ME_PROCESS_PO_CUST method:PROCESS_ITEM.
This works perfectly when PO created from ECC - ME21N. However when a PO is created from APO (by converting PR) this BADI did not trigger or works.
Then I have tried using Purchase order CIF user exit CIFPUR02 ->EXIT_SAPLCPUR_001->ZXCIFU06
It didnot brings in the purchase order number to be created. Hence I could not able to copy the sales order text to purchase order.
Kindly let me know the user exit or BADI triggers during PO creation from APO to copy sales order text to purchase order.
Thanks,
Senthil Kumar

Hi,
Use this.
ME_PURCHDOC_POSTED
Regards,
Shamma

Open EasyDMS from cProjects

hi,
I need to call transaction from cProjects to open Easy DMS.
I need the configuration settings.
Regards,
Reema.

Hi Reema,
in fact it is possible to open EasyDM from cProjects. Therefore the R/3 document either has to be linked via 1) the tab "object links" or 2) the tab "SAP DMS".
The following settings are necessary for the 2 scenarios:
1) cProjects -> Connection to external systems -> Object links in SAP systems -> make settings for the linked SAP objects -> select 0DOCUMENT -> First doubleclick 0DOCUMENT and check if the RFC connection is correct then select -> Service for an object type -> There you have to add 0EASYDMS as an additional row.
Now if you link a R/3 document and press open on the right a pop-up appears with the option "Transaction URL" that opens EasyDM.
2) In -> Cross-application components -> document management -> control data -> define document types you have to add the object link DPR_OBJLNK (screen no 271) to the document type you want to link. Now in cProject in the tab SAP DMS you should be able to create a link to existing or new document (note that on this tab the DIR can´t contain originals - it´s just used as a container). Now in cProjects customizing you need to go to -> documents -> define object links for documents in DMS -> There you need to check if the RFC correction is correct and again at -> Service for an object type you need to add "0EASYDMS".
Now you should be able to create a SAP DMS container at the tab SAP DMS and with the open button you can start EasyDM and fill this container from EasyDM.
In addition if you link this folder with the project template the folder and all DMS documents below are copied on project creation.
If you use cProjects 4.0 and the link 0EASYDMS does not appear please check note 994803.
Best regards,
Daniel

'Released' System Status in Automatically created PS Project from Cproject

Hi,
My questions are related to Automatic creation of PS project from cProject
When We create a PS Project automatically from cProject, the Top Level WBS under Project definition is ' Released' Status . But We need it should be 'created' Status. Pls guide me to change this behaviour .
regards,
Ramesh Nachimuthu

Hi Ramesh,
In the current cProjects application design, nothing exists in standard. You have to create your own implementation, either by enhancing standard accounting class, or your own subsystem to trigger the interface at save.
Zhenbo Wang started to write a sample code that could help you:
Prototype 'Using Subsystem to synchronize the status of linked WBS elements
BR
Matthias

Upload projects from cProjects to RPM

Hi RPM experts,
My client is working with cProjects(linked to PS) , but now they are thinking about using RPM. How should we upload existing projects from Cproject to RPM in order to they are linked?
Is it needed first creat the item and then linked to cproject or can they be uploaded and created automatically?
We have seen this function /RPM/CP_UPLOAD, Is it the correct one?
Thanks everyone for your help!!
Sara

Hi Sara,
This is another way to achieve the Project Upload to cProject. You can create a link between existing cProject and an existing item. Then you can upload the PS project to cProject and Item through RPM application.
For you next query about the mass creation of Item.
you have two options
1) Via Portal. Using Multiple Items create functionality
2) Via RPM_DX transaction, where you can prepare an excel sheet with basic details of the items to be created and upload this excel via this transaction, by selecting appropriate options on the selection screen.
With these two options you can create multiple Items at a time.
Hope this answers your query.
Thanks and Regards,
Piyusha

Automatic PO creation from SC

Hi Experts,
I am using SRM 7.0 with extended classic scenario and I have issue in the automatic po creation. For some Shopping Carts the PO is not automatically created. The SC is having Source of Supply Assigned and all the approves have completely approved the SC. The latest status is I1111 Item in Transfer Process.
I checked in RZ20, ST22 and could not find any error or dumps.
For the SC item under BBP_PDBEI the BE_OBJECT_TYPE is BUS2201 and BE_OBJECT_ID 1, once I trigger the PO creation manually the PO object id is reflected here.
For such SC I am running the report BBP_ALERT_SB_NOTTRANSFERED manually which puts the SC in I1112 Error in Transmission Status and later I can trigger the SC creation from the alert monitor.
For POs created in this manner the PO is created in Held Status without any line items, is this normal?
I have two questions which I want to understand, how is the automatic po creation from SC setup, is there any customizing involved for the po creation from SC to happen automatically?
What else should I check to find the reason why the the SC was stuck in I1111 status and PO was not created?

You need to configure the Purchasing group and this will take care of automatic transfer of Doc to sourcing cockpit. Make sure you also maintain the customization for sourcing always carried out for Prod categories.
Regards
Saurabh

Automatic PO creation from PR with no master data

Dear gurus,
Is it possible to run ME59- Auto PO creation from approved PR with no master data/source assigned/PIR? Assuming user create adhoc PR.
Is it possible to run this process successfully if i didn't meet on the criteria below? let say no.1 is not checked?
1.Material Master purchasing view, check automatic PO check box.
2. Vendor Master purchasing view, check automatic PO check box.
3. Maintain Source list for Vendor and Material (transaction ME01) and also see validity period.
4. Maintain Purchase Info Record (transaction ME11), check info record category (must be standard or pipeline or subcontracting)
5. Create a Purchase Requisition ( transaction ME51N), during creation select check box of Source Determination.
6. Use transaction ME59 and execute for purchase requisition for vendor, you will be able to create automatic PO.
Thanks in advance.

Hi,
yes all point should be checked
check following link
[http://www.sap-img.com/materials/steps-to-create-auto-po.htm]
Regards
Kailas Ugale

Purchase Order Creation from ME5A Report

Hi experts,
My client wants Purchase Order Creation from ME5A Report.
He wants show Open Purchase Requisition through ME5A report then he will select Purchase Requisition Number or line item for po creation from there only.
Please advice how I can map this process in sap.
Thanks in advance,
Chandhu

Why don't you use ME57 to display open PRs and then assign sources and convert them to PO?
Or use ME57 to assign sources and ME59 to automatically convert them to PO.
You can create your very own format for report display using custom "Scope Of List" for ME57.
Look in SPRO under Purchasing>Reporting>Maintain Purchase requisition lists.

Mass sales orders from CRM to ECC

Hi,
We have a requirement to mass upload sales orders from CRM system ECC system. I could not able to find any option to push sales orders in bulk from CRM to ECC.
Could you please let me know if you know any kind of solution for this kind of scenario.
Thanks in advance!
Regards,
Kumar B.

Hi Maggie,
Thanks a lot for your response. But I could not able find CRMD_MASS_UPDATE in CRM system as well as in ECC.
Could you please let me know how to try this other please let me know the program or tcode.
Regards,
Kumar B

IDOC/BAPI for Production order creation from Legacy system

Hi all
We are using an interface to create Production orders from legacy to SAP. Would you recommend an IDOC or a BAPI to create Production orders. If IDOC or BAPI then could you please mention which one?
thanks a bunch

Hi John,
For your purposes, please use BAPI for production order creation from legacy system. There is no standard inbound IDoc available to use. SAP has an IDoc for outbound interface only (message type LOIPRO).
If there is an inbound IDoc available, I would recommend to use an IDoc.
IDoc technology has excellent error handling and will allow you to reprocess an error (if any).
BAPI is also good approach to use and fast in term of processing.
For BAPI approach, you can use BAPI BAPI_PRODORD_CREATE.
Hope this will help.
Regards,
Ferry Lianto

Blocking RdA creation from Sales Order Schedule Line

Hi Gurus,
please do you know if there is a way to block the RdA creation from Sales Order schedule line, for TAS item category? I tried with Header Delivery block without quantity confirmation but even if quantity on schedule lines are not confirmed, RdA is created anyway.
Thank you very much
Kind Regards
Andrea

thank you

Milestone Creation from Cprojects in ECC 6

Similar Messages

Maybe you are looking for