Milestones with different statuses triggering at the same time

Hi Experts,
I have created a Project with 1 WBS Element and 1 Network.
Under Network i have created 1 activity and within that activity there are 2 Milestones.
1) First Milestone has status 'REL' and a Workflow assigned to it
2) Second Milestone had a status 'CNF' and a diff Workflow assigned to it.
i have used BO MLST_NETW as start conditions in both thw workflows.
I want the 1st milestone to trigger when the Network is release and the second when an activity is confirmed.
My problem is when i change the status to Release both the milestones/workflows are getting triggered.
Please let me know where i am going wrong .
Thank You,
Radhika.

Problem solved by using conditions .

Similar Messages

Devices with different Apple IDs ring the same time when some one facetime me.

I have iPhone 5s and iPad mini. Each has its own Apple ID. But, when some one facetime me on one of them, both are ringing. Even one is in London, and one is in Austin.
How to fix to have iPad mini rings when facetime to it, or iPhone rings when facetime to iPhone, not both.
Thanks.

TJBUSM1973, rbrylawski...,
Thank you for helping me on this problem. To answer your questions,
- No, each device has different contact, i.e. "reach me.." to different email address.
- No, one of the Apple ID is totally new one for my iPhone 6s.
- I have done some testing. My son set up two different entries of my devices, i.e., one for each device. But, it is still ringing one both devices when he facetimes me using one of his entries.
But, it seems that if someone just has setup to reach me on one device in her device, then, only this device is ringing. So, I am not sure why. My son's set up are two different contacts to my devices.
I will do more testing when my son brings his device back home.
Thanks again.

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Is it possible to have 2 icloud (from 2 different iphones with different apple ids) on the same computer?

I am inquiring as to if you can 2 different icloud accounts (that come from 2 different iphones with different apple ids) on the same computer. I would like both iphones to be able to back up to the same computer since we have different accounts/pictures/mail etc.

Yes, if you create 2 seperate user accounts.

Can iCloud on a Windows 7 PC be used with two different Apple accounts at the same time?

Can iCloud on a Windows 7 PC support two different Apple accounts at the same time?

You should be able to do this by using the Multifox add-on - http://br.mozdev.org/multifox/

How to sync with two computers not at the same time, I'm registerd with one computer

How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
Where do I find my Sync Key ? so I can install manually if it works ?

Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

Can i play different songs to different airplay speakers at the same time ?

Can i play different songs to different airplay speakers at the same time ?
I know you can select the different speakers to play the music to, but wondered if you can also push different music to different speakers at the same time ?
If not is there a way around this other than going for something like Sonos ?

I found another solution in this thread http://forums.macrumors.com/showthread.php?t=695360
Again you need the rogueamoeba guys.

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

scottiewade wrote:
Thanks. I know how to select multiple tracks in the mixer, did that and put on group clutch,
Hi
Wrong..
To assign tracks to a group, click in the dark gray box just above the automation (Read/Write/Off etc) on a channel strip, and select the group number you wish to use. The first tim eyou assign a group, the Group Setting swindow will appear automatically, thereafter you need to click on the group area and choose 'Open Group Settings'.
Make sure that you have turned off Group Clutch (this disables all Groups)
Maybe this will help
http://support.apple.com/kb/VI248
CCT

Can I use HP Pro 8600 with usb and wireless at the same time

Can I use HP Pro 8600 with usb and wireless at the same time? Sometimes I cannot get the wireless to work, it seems to be my laptop. It would be nice if I could use the usb, but it doesn't work. What should / can I do, if anything?
Sam

Hi,
Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Is it possible to call a function with the same name from 2 different dll's at the same time.

I'm trying to call a function ( F ) form 2 different libraries ( A.dll and B.dll ) at the same time. The first lib loaded determines the function F. A->F and B->F have same interface and name but different implementation.

Hi,
I tried it with two dll's, both with the same interface, and at the same
time, in the same VI. The popups even appear at the same time.
But now I understand the problem... Both dll's are created by LabVIEW! If
they are not (or one is not, and the other is), this is no problem.
And VI's in memory cannot have the same name. LabVIEW doesn't care if VI's
are in a dll or not.
This might not help, but if you want to make some sort of "plug in" system,
you might consider using llb's. By loading VI's dynamically, you can select
the path from which they are loaded. You must unload (close all references)
one before the loading the other, or the same problem will occur. If you go
this way, I consider a different approach. Make on
e library (or even a dll)
that has the interface you like, this is the "loader". Now make several
"plug in"'s, with the same interfaces. The name of each function in a plug
in is a concatenation of the library name and the function name. The loader
has one extra function, that loads (and unloads, when done) references to
all desired libraries to use (the names of the functions can be figured out
easily). All that the loader functions do is dynamically call the library
functions. You can use a call by reference node for this (you can use the
connector pane or the loader vi, since the interface must be the same!).
If you go this way, I guess the loader library can be converted to a dll...
Hope this helps.
Wiebe.
"rsam" wrote in message
news:[email protected]..
> Thx Wiebe,
>
> did you load both dll at the same time? For example in 1 vi. Somehow
> the first loaded function keeps to overrule the second. Notice that
> the interface is
exactly the same.
>
> I loaded 2 dll created in Labview with results described above.
>
> Regards Ruud

Cut and paste with mouse different text selections at the same time

help me with this. I have tried many hot keys to select different sentences on different paragraphs at the same time and i couldn't

You can do this with several apps - LaunchBar being one:
http://www.obdev.at/products/launchbar/index.html
note the ClipMerge feature.

Playing iTunes with different user accounts in the same computer

I just created another user account in my computer running windows XP, but when I try to open itunes in the new user account it ask me to close the other itunes that is running in the administrator account or vice versa, Why I can't run both itunes at the same time if both are in the same pc? I already checked in the preference panel the option for share my library music in both itunes just in case if that is the problem but still asking me the same. Am I doing something wrong?
Powerbook 1.33 Ghz Mac OS X (10.4.7)

iTUnes, in basic terms, does not play nice with the "Fast user switching" feature in windows turned on. THis feature (If memory serves me right) is automaticly turned on in windows when you create another user account. to turn it off, goto control panel>user accounts>change the way users log on and off.
Afew aricals about iTUnes and fast user switching can be found here http://search.info.apple.com/?search=Go&lr=lang_en&kword=kipod%20OR%20kipodwin%2 0OR%20kitunes%20OR%20kituneswin&type=ktechORklearn&newstype=&q=Fast%20user%20switching

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

Does anyone knows a way to work with various Pages documents at the same time, for example with a system of tabs to switch directly from one document to the other?

Hello everyone,
Working with numerous Apple Pages documents at the same time, I am looking for an efficient solution to switch faster from one document to the other. Integrating all them in a single framework, for exemple by switching from one to the other with a system of tabs would be of great help. Does anyone knows if such a possibility exists?
Thanks in advance,
Jean-Baptiste

jbp- wrote:
Thanks. It works and is very efficient. Not as much as a real system of tabs, but is allows to switch very fast between different documents. Only regret I would have is that it doesn't work with a document which is on full page mode. But that's already very helpful!
You're very welcome but Peggy really gave you the answer already.
With regard to the full screen apps, I don't think Apple have yet worked out how to make them elegantly coexist with other apps. The closest you can get is the four finger swipe gestures you may use on a trackpad if you have one (Mission Control and App Exposé).
In fact nowadays I use the App Exposé (four finger swipe down gesture) more often than I use Command-Accent to move between documents in the same app (when not in full screen). It also as the advantage of showing you thumbnails of recently opened documents below the ones already open within the app. If you haven't tried it, I suggest you give it a whirl.
I can't remember now but I think the four finger gestures are not enabled by default and you must switch them on in System Preferences > Trackpad > More Gestures.

Milestones with different statuses triggering at the same time

Similar Messages

Maybe you are looking for