Millions of midi channels, only 4 audio channels

so when i'm in logic i can hold down on a channel, go to audio/ audio instrument and then select hundreds of different insert channels. great for midi
however there are only 4 audio channels to choose from! how can this be?
thanks

dear pp,
sorry...i couldn't resist. what's your interface and how many inputs does it have? if it's 4, then no more than 4 can be accessed at any given moment. if it has more than 4 then you haven't either set up enough audio tracks or assigned enough inputs (inputs 5+ per individual trks.) to the rest.

Similar Messages

NI products only sound midi channel 1 of instrument instance

Set it up right. Multichannel Instrument cabled to Audio Instrument in Environment. But only channel one responds in every sub-channel selected in the arrange window. Whew! This is driving me crazy. What am I doing wrong? Port=All. Name of midi channel changes as it should in the parameter window, but I can only hear midi channel one in any subchannel when triggered from keyboard. The only way I can hear the other instruments is to use the NI onscreen keyboard. Still all midi info plays back on midi channel one which is not the sound I want for everything.
What a work out: an exercise in futility. Any ideas?

After letting the problem rest a couple days, I returned to it and got the setup to
work. I don't know for sure what I was doing wrong in the first place but here is
what I did differently that worked:
Before opening Audition, I opened keyrig.exe and set up the MIDI channels for the
instruments I wanted. I then SAVED the instrument profile for the GM4 module in the
GM4 Patch folder under the Keyrig Data folder (I think the folder names are correct
but am doing this from memory).
Then I opened Audition, did what I needed to do to get the keyrig loaded to play on a
MIDI track. I left the MIDI input on <All> and the output on <None> in the Sequencer.
I then clicked on Settings which brought up the keyrig.exe control panel. Then on
the GM4 module I LOADED the profile I had made above. Then, as I selected each
channel via the keyboard, I got the correct instrument and was able to record them. So
by "preloading" the instruments instead of trying to select them while in Audition,
the setup worked.
Observations: Audition and the keyrig.exe software do not like each other. If I had
the keyrig.exe software open (Settings) and accidentally clicked in a non-button area
of the interface, Audition crashed. Once I loaded my profile as above, I could then
assign new instruments to different MIDI channels from within Audition but since it
was easy to crash Audition while keyrig.exe was open, I would try to avoid it. Once
set up--it was a blast to goof around with the different sounds.

Only left audio channel works

only left audio channel works

Go step by step and test.
1.   System Preferences > Sound > Output > Internal Speakers/Headphone
       Settings for the selected device:
       Balance:
       Make sure that the slider is set at middle.
2.    AudioMIDI Setup
       Applications/Utilities/ Audio MIDI Setup.app
       Audio Devices window
       Side Bar
       Click the Built-in Output.
      Make sure that CH1 and CH2 volume sliders are matched.
3. Reset SMC and PRAM.
     Reset PRAM. http://support.apple.com/kb/PH4405
     Reset SMC.     http://support.apple.com/kb/HT3964
     Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

What version of Premiere Elements and on what computer operating system?     Elements 13 on Windows 7
What is the brand/model/settings of the camera that recorded these videos?        ony PMW 320
When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
the video in the Premiere Elements Editor, how many channels does the Audio Meter display?
I just drag and drop video and when playing back only channel 1 will appear
What is your intended export for this video in terms of audio as well as video compression and formats?    MP4
I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
Thanks for the help if possible,Kevin416 873 8374

[ReWire] How to use Logic's MIDI channels only

Sorry for the rather vague subject title, but I can't come up with a better one.
Let me explain the situation:
I'm working on a project with several audio and MIDI tracks and also two ReWired Reason4 instruments, all routed to their corresponding Reason device. (the MIDI information is coming out of Logic and being routed to Reason and the audio is then routed back into Logic)
My problem is with Logic's own MIDI channels. When I record enable one of these (Logic) channels and I play my MIDI keyboard, Reason also responds to that and plays one of the instruments.
So I hear the Logic instrument as well as the Reason instrument. To put it in the easiest way possible, I don't want that.
Is there a way to make Logic stop sending out MIDI information to it's ReWire slave, when a non-rewire channel is record enabled?
Thanks in advance for your help

Hmm that makes perfectly sense... that I haven't thought of that myself
I will try tonight. Thanks!

How to access audio instruments as midi channels from midi keyboard?

Hi!
This is my first post here.
I use mostly Logic Pro 7 as a sound module with my keyboard. I have a song file in Logic that I made some time ago, where I've linked every audio instrument to a corresponding audio channel (same midi channel). All channels are in record mode, and thus every audio instrument is assigned a midi channel - and I can play different audio instruments by changing the midi channel on my midi keyboard.
Now, I want to create more tracks, so I can have more instruments to choose between. That doesn't work.. I try to make a new logic file and do the same thing with more channels, but I can't remeber how I made this work in the first place. I've been trying for hours and hours, and I'm going nuts here.
I would extremely grateful if anyone could tell me how this is done.
(No rewire/extra software is necessary.)
Thanks for reading.

Welcome!
It's fairly straightforward. On each audio instrument, assign a MIDI channel in the parameter box - so eg Audio Instrument 1 is set to MIDI channel 1, Audio Instrument 2 is set to channel 2 etc.
The key part is in your song settings "File -> Song Settings -> Recording" to make sure "Auto demix by even channel" is ticked.
Now, shift-click on the record buttons for all your audio instruments, and when you send on MIDI channel 1, you'll play the first one, switching to channel 2 you'll play the second one, and so on.
The max you can do is 16 channels at once, afaik, as the sequencer input doesn't retain port info (which is a bit of a shortcoming in my book, but there you go...)

Hearing only one audio channel in source window & in timeline

Hi all,
As most of you I get a lot of footage where the audio is split - left channel for gun-mic\\front-mic and right channel for neck mic.
A lot of times I want to preview only one audio channel in the source window.
I cant find a way to do it.
Also whan I try to hear\monitor only one channel when the clip is in the timeline - its a problem -
the only way I know is by using the fill Left\Fill right effect - it is good when I do the final mix
but sometimes I just want to hear one of the channels.
without the tidius way of adding an effect just to preview something and then deleting it.
I'm sure there a way to do this - right?
thanks!

Thank you very much for replying
Select the clip in the Project Window and duplicate.
Select duplicated clip > clip > Audio Options > Source Channel Mapping.
Disable one of the channel and hit OK
Place this clip on the timeline and ALT + double click so it will open in the Source Monitor.
This is a very messy and unconfterble way to work - because I need to toggle this every time I want to switch channels to monitor.
Instead of adding the effect fill left/right you can toggle the effect on and off for the whole track in the Audio mixer.
This is a nice solution when I work on the timeline - but it won't help when I go on the source footage.
I think the only way to switch channels for a quick preview in premiere is by buying a Sound card with a channel switcher - or using a mixer...
so dissapointing...

Audio Instrument Midi Channels

Hello, all. Can someone explain to me the pros and cons of having the MIDI channel for your audio instruments set to 1 as opposed to all All (or All as opposed to 1, for that matter)? I ask this because I was having some problems with a third party plug (Native Instruments' Reaktor 4); namely it was playing in one instrument track (1), but then when I would set up another track with another instance of the same plug, it wouldn't play at all on the new track. This was very odd because when I inserted a different plug on the second track, I WOULD hear the new plug. Anyway, to make a long story short, I noticed the MIDI channels of all my instruments were set to 1. I changed them to All, and everything is now working and I can hear all my instruments. However, I was (still am) wondering if I, perhaps, just detrimented myself in some manner I know not what by changing my intrument MIDI channels from 1 to All.
Any help on clearing this up would be greatly appreciated.
Thank you very much, one and all, for all the help and support.
Javier Calderon

Thank you very much for the response, Natural. I'm glad that as far as you know, midi channel 1 generally works well.
Interestingly enough, I actually have to manually set the midi channel to 1 (on all tracks other than inst 1, that is) because whenever I create an instrument, Logic seems to automatically assign the instrument to its corresponding midi channel - i.e. inst 1=midi 1, inst 2=midi 2, etc.
And what you said regarding some software instruments being sensetive to the midi channel you assign seems to be thoroughly correct. However, it seemed to be channel 1 that caused the bugaboo in my NI Reaktor plug. Setting the midi channels to All seemed to work well.
Thanks again.
Anyone else have any knowledge or advice to impart would be welcomed and appreciated.
Javier

I have a scarlett solo usb mic interface that only records audio to the left channel in quicktime.

When I record a movie using my web cam in conjuction with my scarlett solo usb mic interface it only records audio to the left channel. I have tried everything and looked everywhere! Any help would be appreciated.

Maybe:
Quicktime Input is always mono?
how can I make a stereo recording in QuickTime?

When I press 'Low Latency' button I only have audio coming through left channel ?!

When I press 'Low Latency' button I only have audio coming through left channel !?
When you take it off 'Low Latency' mode the audio is fine and comes out Right and Left speaker.
Can anyone please advise why this happening and how I can fix it ?

I think Pancenter is trying to get you to read and understand the "Working in Low Latency" section of the manual as the results or problems with working in Low Latency mode are variable.
This section, for instance:
Note: The sound may change in Low Latency mode. Depending on the plug-ins in use, the changes can be anything from subtle to dramatic. If plug-ins being used do not exceed the total latency limit, there will be no audible difference.
If it was me posting about this issue I would now come back with what exactly is inserted/bussed on the tracks because it could be an accumulative problem based on what plug-ins you have active and if they are on audio tracks (stereo or mono), instrument tracks etc. Lots of variables. The section of the manual quoted above won't give specific instances as any user could be using any combination of any amount of plug-ins.
So more information is needed before anyone can help you any further.

Connecting kurzweil sp88 to GB I want to connect my Kurzweil sp88 to GB. The Kurzweil has a baffling array of buttons and possible MIDI channels. It also has the old style MIDI plug ins. I've got the MIDI out connected to my MacBook Pro via USB adapter.

I have my Kurzweil connected to my MacBook Pro via an adapter (old style MIDI from Kurzweil to USB adapter connecting to Mac). The Kurzweil has a baffling array of buttons and possible MIDI channels. Can anyone please tell me which of the channels I should use? Also, should I leave the MIDI In cable out of the Kurzweil? Thanks for as detailed an answer as possible. If you like you can respond directly to me at [email protected]

First of all I do not own this keyboard. But a quick look at the manual (found on the internet) says that when first powered up the SP88 is in Internal Sounds mode. Meaning you hear the sounds selected when playing the keyboard. It also stated that the default Midi Transmit Channel is Midi Channel #1.
Looks like you would need to go to the SP88 Keyboard's MIDI SETUP and simply select LOCAL OFF. Now the keyboard should be ready to transmit Midi Out only and no internal sounds should be heard.
Next you may or may not need to do this but you might need to go into the Utilities Folder found in your Applications Folder on your Mac and double click AUDIO MIDI SETUP the keyboard Icon. Figure #1 below.
Next you need to make a physical connection from the Midi Out of the SP88 to the Midi In on your Midi Interface. Figure #3 below. You may need to Click on Add Device first. Figure #2 below.
In the examples shown below I have a Yamaha Electronic Drum Kit that is Midi Out only... not USB out. I had to plug a Midi cable from the Midi Out Port on the back of my Drum Module to the Midi In Port on the back of my Motu 828 Audio Inferface which is connected to my Mac. Next I created the Audio Interface and Drum Module "Devices" as mentioned above.
I then double clicked on the Drum Module and made my Midi Out Selections. Figure #4 Below. And once it was setup and the icons closed I used my mouse to draw a virtual cable connection from the Drum Module Out to the Audio Interface In. Figure #3 below. This is how I got my Midi Devices to talk to one another.
Once you have made your setup as I have outlined create a MIDI Instrument Track in Garageband, select an instrument for example a Piano then Record Enable that track in Garageband and see if you now hear what you are playing. In this example the SP88 is a Midi Controller only and you will only hear sounds selected in Garageband which is what you want.
Keep in midi your setup may be different than mine. You can keep your SP88 Keyboard on the default Midi Channel #1. That would be a good place to start. Garageband receives Midi on all channels.

Multitimbral Instrument Plugins (ie 1 instument many midi channels)

I am using SampleTank and Kontakt and they way I use them just does not seem right ! The problem starts here..
- when I add Kontakt to a Instrument Strip the Midi channel is assigned in the strip in the environment window.
- If I create multiple tracks with the same Instrument and change the midi channel of a track they all change - Doh... not very logical.
The only work around to this that I have found is to create multiple instrument stips on env window and assign them all to the same instrument (ie instrument 1).... then give each a serperate midi channel - this creates lots of channels with the same audi meters bobbing up and down.
Sure I can use multiple instances of the same plugin (as with EXS24) but that is not very memory or processor effecient...
Now I know I can create Aux Channels and route channels to each - but you get in a "too many channels" mess !
So am I missing something is there an easy & logical way to put an instrument on a channel and route multiple midi tracks to it ?
Did I explain the problem clearly ? Any help/advice/guidance very welcome !
Cheers
Ian

Hello !
You have to go in the environment page, instruments, and create a new multi instrument, which you will name Kontakt for instance. Activate all channels by ticking each check box in the instrument icon in the environment page. Then open another environment page where you will choose to see the Audio objects, I.E. the mixer in that case. Drag a cable from you newly created multi instrument to the channel strip containing your Kontakt sampler. You get then a message saying that the ports are in use, do you want to change the assignment, and you answer YES. Now in the arrangement page, set midi channel of Kontakt to All. Now you can create Midi tracks for each midi channel. Multiple outputs are either managed inside the sampler itself or using the Multiple Output version of the plugin, depending of which plugin model.
Hope this helps

Help! I can't get Mainstage (2 or 3) to map patches to different midi channels

I recently upgraded to Mainstage 3, partly in the hope that I could solve this problem I've had.
So, I use an M-Audio Axiom Pro 61 and I want to have 2 channel strips on 1 patch: an organ sound controlled by the keyboard and some drum samples controlled by the drum pads.
In layout mode, I've set the keyboard to Channel 1 & the Drum pads to Channel 10 and in edit mode I've set each channel strips' midi input to the appropriate multitimbral settings.
When I play the drum pads I only get drums - so that's working fine - but when I play the keyboard it triggers both channels, and no amount of tweaking has got me round this issue.
I've tried to go into the Axiom Pro settings and change stuff there but haven't had much luck (though i'm not as well learned with the inner settings of the keyboard so I wonder whether there's something I can do there)
Can anyone help? I really want to multitask!
Thanks

For this scenario, you add 2 MIDI actvity or keyboards to your workspace. Name one "Organ" abd the other one "Drums" and assign both to your Axiom, but set the MIDI channel for the "Organ" to 1 and for the "Drums" to 10. Here's where the splitting by MIDI channel happens.
Now, switch from Layout to Edit mode and set the MIDI input of the organ channel strip to Keyboard "Organ" and the MIDI input of the drum channel strip to Keybaods "Drums". The Multitimbral setting in that section converts the MIDI events from the Keyboard objects and if the instrument reacts to all channels, it won't make a difference. This is meant for some AUs, that support Multitimbrality, like NIs Kontakt or the Apple's Vintage B3, that can make different sounds for upper, lower and pedal manuals.
Small re-cap: If you need to split by MIDI channels, you need to do this in Layout mode by adding objects, that react to a specific MIDI channel only.
Hope this helps!
DaCaptain

Can't get sound from my midi channels

Hello. I've been using Logic 8 for a while. 2 days ago I updated to the newest version 8.0.1 and after I did it, I can't get sound from my midi channels. Before the update I could use my Ivory pianos perfectly, but after the update I can't. I've tried every setup I can imagine. I've been here sitting for hours trying to fix it but I can't .
Logic recognizes my keyboard, since I play...all the notes appear on the transport bar, but i can't get sound from any sampler (Ivory, EXS, EVP88, etc).
I've checked my outputs, etc...but nothing.
Please help me!!! I'm desperate!
Thanks

Do you hear the Audio tracks and only Software Instruments are not working od don't you get any output at all? I was just assuming that through the update your Apogee has been removed as your Audio device in Preferences->Audio->devices.

Multiple midi channels in one region

Hello,
I've been using Logic since version 4.7, but haven't tried the following in a version newer than 5.5.1. Not sure what functionality might have changed, so here goes...
I'm having issues with having notes with different midi channel assignments in a single region. I have 3 audio instrumets on midi channel one, two, and three, respectively. I have a midi instrument whose midi channel is set to all, that is patched to all three audio instruments in the environment. The track containing my region is playing back on the midi instrument, not the individual audio instruments. I have assigned channels 1, 2, and 3 to individual notes in the region, yet when it plays, all 3 audio instruments are triggered for every note rather than only the instrument whose midi channel matches the note's channel.
Thanks in advance,
JG

Thanks for the responses! The issue is that the three audio instrument objects in the environment are not respecting it's assigned midi channel. Yes, the channel splitter will split the incoming midi channel, but I shouldn't have to use the splitter if I set the midi channel on instrument 1's parameters pane to channel 1, and if the the midi channel is set to channel 2 on audio instrument 2 ect. So in the above example, no matter how how many different events I send on different midi channels to audio instrument 1, audio instrument 1 should only respond to midi channel 1. However it responds to all midi channels. Again, the channel IS NOT SET TO ALL.
So here's a simple test:
-Instantiate Logic's EFM1 on audio instrument 1
-Set audio instrument 1's midi channel in the parameters pane to midi channel 4
-Create a blank midi region with the pencil tool on audio instruments 1's track in the arrange window
-Open up the blank region in the matrix editor
-With the pencil tool, create a few notes.
-Then open up the same region in the event list editor and make sure that all the notes are on a midi channel other that channel 4.
-Play back the region and EFM1 will play back not respecting it's channel assignment!
Hope this clears some stuff up.

Millions of midi channels, only 4 audio channels

Similar Messages

Maybe you are looking for