MIME "application/x-mplayer2". plug in??

i am trying to listen to an audio preview on the at&t web site and it is telling me this:
"The page “AT&T Extras: Audio Preview” has content of MIME type “application/x-mplayer2”. Because you don’t have a plug-in installed for this MIME type, this content can’t be displayed."
how do i get this plug in?
i have realplayer, flipmac, and quick time all on my macbook
what am i missing??

Install Flip4Mac.
Message was edited by: hpr3

Similar Messages

MIME "application/x-mplayer2"

I want to watch mlb.com baseball games but I get a message that says I have to have a MIME type plug-in "application/x-mplayer2". Where can I get this? I tried searching it and when I find it I always get a message that saysI don't have something so I can't get there from here. Help.

OK, I downloaded it and installed it. But I still can't get the MLBTV.com games. MLBTV.com has these system requirements:
OS X or above PowerPC G4 or later (700mhz & up) 512MB RAM + Broadband (cable/DSL/T-1)
Media Player: Mozilla 1.x (Firefox 1.0.7),
Browsing: Safari 1.3 / Mozilla 1.x Windows Media Player 9.0 or above, Flash Player 7 or above
It doesn't mention Flip4Mac. So I'm confused.

MIME type application/x-mplayer2

One URL I visit pops up a warning that I don't have a "MIME type 'application/x-mplayer2' plug-in installed, so I can't use certain portions of the site. Where can I find such a plug-in? Is it a popular plug-in that is used by other sites?

I've never come across this plugin before - doubt it's widely used - but it might refer to MPlayer OS X, MPlayer Plug-in or Windows Media, I'm not sure. Try out MPlayer Plug-in first.
Yang

Keep getting error, Plugin not installed MIME PlugIn application/x-mplayer2

many wb pages are not accessable, i keep getting this error messge?
The page “Coastalwatch :: surfcams :: surf reports :: swell forecasts :: news” has content of MIME type “application/x-mplayer2”. Because you don’t have a plug-in installed for this MIME type, this content can’t be displayed.
Wher do i get this plug-in from? Or is it as simple as changing a setting on the system?

Hi Percy and welcome to the forums!
Wher do i get this plug-in from? Or is it as simple as changing a setting on the system?
Probably a bit of both. Try this:
These are the downloads and the settings you need in order to view/hear pretty much everything: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
Assuming you already run OS 10.4.9 or above and have Quicktime 7.2, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer from http://uk.real.com/player/
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
Now repair permissions and restart.
The world should now be your oyster!
You should also have the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

Safari and MIME type "application/x-mplayer2"

When trying to listen to web pages conatining mp3 audio files (prior to purchasing them) , Safari comes up with a message saying that MIME type “application/x-mplayer2” is not installed and only downloads the html file and not the mp3 file. When we check on our installed plug-ins in Safari, MIME type “application/x-mplayer2” has been installed.
How do we fix this? We are using Safari Version 2.0.2 (416.12) OSX 10.4.3. It works on one of our older machines running Safari Version 1.3.1 (v312.3.3) OSX 10.3.9
Regards,
Peter

Nevermind. I answered my own question. Seek and you shall find. http://www.apple.com/safari/download/plugins.html I just had to DL the WMV plug in. All better.

Application/x-mplayer2 ?

Okay...I'm trying to play a video on a certain website on Safari on my MacBook, and I keep getting this error message that says that the page "has content of MIME type “application/x-mplayer2”. Because you don’t have a plug-in installed for this MIME type, this content can’t be displayed."
What does this mean, and how can I get this application?

Do you have the latest version of Flip4Mac or Real Player installed?
Have you tried to view in another browser? If the video works in another browser, then the problem is with Safari.
Which version of Safari are you using?
It would also help if you still have trouble, please provide a specific URL/link for people to look at.

Safari can't play application/x-mplayer2 sounds

I use Safari to visit websites that run Nagios, a network management system. When something
is wrong, Nagios displays web pages that have an imbedded object that's of MIME type
"application/x-mplayer2". Safari displays a pop-up that says
Safari cannot find the Internet plug-in.
The page "Nagios" has a content of MIME type
"application/x-mplayer2". Because you don't have a
plug-in installed for this MIME type, this content
can't be displayed.
I can navigate directly to file .wav file and Safari (QuickTime?) plays the sound. I think
I need to get "application/x-mplayer2" added to the list of MIME types that the QuickTime
plug-in handles. Is there a way to do that?
I know that QuickTime has a System Preferences pane, with an "Advanced" tab with a
"MIME Settings" button. That doesn't help - it controls MIME types that QuickTime supports,
not the MIME types that the QuickTime plug-in supports.
Also, I had Window Media Player installed, but it gave "One or more arguments are not valid".

Try this:
These are the downloads and the settings you need in order to view/hear pretty much everything:
Assuming you already run OS 10.4.9 or above and have Quicktime 7.2, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer from http://uk.real.com/player/
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
Now repair permissions and restart.
The world should now be your oyster!
You should also have the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

Difficulty scanning slides on my Epson V600 running Lion, Adobe Photoshop CS6, and can no longer use the Epson scan application or the plug in for Photoshop. Should I revert back to leopard in my time machine to finish scanning my family slides?

I am running Lion 10.7.5, Adobe Photoshop CS6, scanning slides on my Epson V600 and can no longer use the scan application or the plug in for Photoshop. Should I revert back to leopard in my time machine to finish scanning my family slides?
In 10.7 there is not a twain that works with Photoshop for importing with all the options needed to scan transparencies. I noticed that when I was scanning in October 2012 I was still using CS6 so somehow I was managing to be able to use all the scan features.
They sell 2nd party software (VieScan and Silverscript)which I found to be just mimially OK and very hard to use.
I just want to scan like I used to.
Can I use time machine to go back to an earlier operating sysytem LEOPARD, and then do my scans and then save the photos and them go back to the LION system?
I spent 7 hours trying crazy solutions - downloading Windows CS2 Photoshop and then using a program so I could run it on the apple. Then I couldn't figure out how to put a plug in for the scanner in the stupid windows Photoshop program. Googgling the computer like a mad woman trying to ask questions. I am not giving up...
Please help if you can...
Thanks...

I assume you've tried using Image Capture. Give VueScan a try.
http://www.hamrick.com

Application Support-Aperture-Plug ins folder not found

I'm trying to install flash album explorer plug in. I'm trying to find Application Support-Aperture-Plug ins to innstall it but I'm not able to find it. I was searching in every library under user, system, and I haven't been able to fint it....please help!!!!!!!! I have Aperture 1.5.2
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)

DonCarlos, you have to create the folders if you do not have them. In Finder, follow the folders up to Aperture. This is where I had to create "Plug-Ins" and then clicked on it to open. Then created its subfolder "Export". I dumped the Flickr plugin here and restarted Aperture. Works perfectly.

MIME type "application/x-mplayer2", but you don't have a plug-in installed.

I went to http://www.microsoft.com/Windows/MediaPlayer/ and installed Windows Media Player 9 for Mac OS X, but it still doesn't work.
All I want to do is listen to Sirius online... Thank you!!!

Download and install the Flip4Mac Windows Media Plugin 2.2. It replace WMP and is available at http://www.flip4mac.com/wmv_download.htm

Error Message- JTV has content of MIME type "application/x-mplayer2."

Because you don't have a plug in installed for this type of Mime this content can't be displayed.
Where do I go to get this plug in so I can view content that I'm needing to view?
Thanks!

http://flip4mac.com

Closing window of web dynpro application with exit-plug don't run in the EP

Hi everybody,
I want to close a window that contains a Web Dynpro with a close button, because it's used and create as a popup from an other iView (that's not created with web dynpros) in the EP. I read the different threads how to close a window in web dynpro, like JavaScript in WD
I create a HTML file with the javascript code to close the window and it works fine, when I start the application separately.
If I used it in the portal and click the close button I get the following error message:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
I tried also: ...wdFirePlugExit("javascript:self.parent.close();") or some other javascript code, but got the same error message.
Then I tried:
WDPortalNavigation.navigateAbsolute(url,WDPortalNavigationMode.SHOW_INPLACE,(String) null, (String) null,(String) null);
instead of fireing the outbound plug in the action of the close button
(...InterfaceViewController().wdFirePlugExit(url);)
but than a new window with the EP open and the old is still there!
We use the NWDS2004s an the EP 7.00.
It must be possible to close a (this) window!
Thanks for any hint
christian

Hi,
This is what you can do:
1. You have already created the HTML file with the necessary javascript in the foloowing folder structure :
src->Mimes->Components-><your component name>-><fileName.html>.
2. Create a new iView of type URL in your portal.
3. Get the absolute URL of this HTML file inside your project. This will be in the following format:
http://<server>:<port>/webdynpro/resources/sap.com/<development ComponentName>/Components/<namespace>/<fileName>.html
You can find it thus:
try {
String u = WDURLGenerator.getAbsoluteWebResourceURL(wdComponentAPI.getDeployableObjectPart(),"filename.html");
wdComponentAPI.getMessageManager().reportSuccess(u);
} catch (WDURLException e) {
// TODO Auto-generated catch block
e.printStackTrace();
4. Now enter this URL string as the URL for the iview.
5. Do a normal portal navigation to this iview on-click of the button.
Regards,
Satyajit.

Help needed with MIME application

Hi all,
I tried to listen to the radio on my 10.5.2 Mac, as soon as I hit the play button I get this error message that the page has a content of MIME type application and since I don't have the plug-in installed I can't listen to the radio.
Please help, how can I get those application ?
Thanks

If radio implies iTunes, then post to that forum. If not, provide the details. iTunes radio works here.

Is it possible to send data from an external application to a plug-in that executes a menu item?

I want to pass some parameters from an external appliaction to my own plug-in. The plug-in creates a menu item for adding electronic signature. The menu item is executed from my external application using MenuItemExecute("mymenutem").

Since you control the application AND the plugin - you can define ANY method of communication you want. Shared files, shared memory, IPC, named pipes, etc.

Java is blocked. Don't know why. Error: Application Blocked Java Plug-In 10.51.2.13 using JRE version 1.7.0_51-b13 Java HotSpot(TM) Client VM

I keep receiving this message when trying to use http://www.exodus-chats.org/DolTerias . it uses a java based chat system, and won't allow me to open the application. I've tried checking through my options menus, but I've found no reason as to why this can be blocked. The only thing I've come up with is my plug ins, but it doesn't allow me to change anything to allow the app to be used.
Application Blocked
Details: Java Plug-In 10.51.2.13 using JRE version 1.7.0_51-b13 Java HotSpot(TM) Client VM

Starting in Java 7 Update 51, sites that would normally be blocked based on your Java Security settings can be added to an Exceptions list, via the Java Control Panel. See the Java Help page [http://www.java.com/en/download/faq/exception_sitelist.xml How can I configure the Exception Site List?] for details.
Ref: http://kb.mozillazine.org/Java#Java_security_prompts

MIME "application/x-mplayer2". plug in??

Similar Messages

Maybe you are looking for