MIME Plugin Support must be able to read application/x-mwf

I also have this problem as Mr. Michael Mccarthy3
Can anyone tell me what kind of MIME Plugin Support do i need to download, inorder to view map website? It must be able to read application/x-mwf.
Any help would be greatly appreciate too anyone care to help?
Regards
norman_imac

Hi spacesuiter,
Thanks for the response, I have visited the site and try to down load what is need but yet i can not see the map display on my screen. do you have any more ideas. I have both IE and Netscape browers.
Many thanks
Regards
Norman

Similar Messages

  • How can i store a value in a register, to be called up later in the program. I must be able to read and write to it.

    Im looking at a bearing reading and i only want it to do a case loop if the data has changed on the bearing, so i need a value of what it was a cycle ago to compare it with, how do i do this?

    Hi,
    I'm not sure I,ve understood you clearly but it looks like you need to use "shift registers" in the loop.
    Shift registers allow you to pass data from one iteration of the loop to another. For example in the situation when you need to know the value of some variable on previous iteration or on pre-previous etc.
    To create shift registers on the loop you have to right click on the border of the loop and select "Add shift register" from pop up menu. Two arrows will appear on the left and right sides of the loop. To write data to the shift register you have to wire them to the right arrow, and to read data you have to read it from the left arrow. When you read data from shift register you read the value from the previous iteration. When you write data - you wri
    te the curent value there. If you want to read preprevious data you have to click on the left side of shift register and select "Add Element". The new element (arrow) will appear which corresponds to preprevious value. And so on. To initialize shift registers before execution of the loop you have to wire the some data from the outside.
    Another solution of your problem is using of local variables. You can create them from pop up menu of each control or indicator on the diagram. You can set them as read or write local.
    Good luck.
    Read help.
    Oleg Chutko.
    Attachments:
    shift.vi ‏16 KB

  • I can not read my folders on the desktop. I receive the message "appleworks 6 quit unexpectedly" Is it because I installed new software that a message said yesterday. I must be able to read my folders on the desktop. Help

    How can I read my folders. Appleworks 6 quit unexpectedly and that is the message I get every time I try to open the folder. Please help.

    re-post and include details of what Mac you have and what verson of OS X.
    He did:
    https://discussions.apple.com/message/18001126
    Unfortunately he included none of the above so babowa had to ask all over again
    Posted here so you will get an email and hopefully respond because this is a good one

  • FMLE must be able to read MPEG2 / tv-tuner streams

    Please!
    You guys need to implement the ability to stream from tv-tuner cards! It would really become handy, I know there are alot of people out there who would love it.

    DVB-C.
    it works flawlessly in VIDEOLAN VLC PLAYER.

  • LightScribe SuperMulti DVD±R/RW with Double Layer Support is no longer able to read all lightscribe discs(Blank or Containing Data)

    Hi,
    The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
    Notebook PC support
    The number of my computer is : LM610EA#A2N.
    Could anyone please at this splendid forum take some of their precious time
    out to really reply my questions and solve my problems?
    FIRST OF ALL:
    My HP Pavilion Laptop is about 3 years old.
    My
    sister's Dell Inspiron laptop is 3 years old.
    My HP laptop is well-cared, as opposed to my sister's Inspiron Dell laptop, which is always thrown in dust without caring at all. Also, its battery is always inserted even when it is fully charged while the laptop is plugged in to the main power supply. 
    However, my laptop is either used on only battery, or on plugin. Also, it is kept from the dust. But, I really found that the battery of the Dell laptop still lasts about three and half hours, and there is no problem cooling fan is not properly properly.
    I only remember one thing differently done on my laptop battery which is I charged it fully, then I stored it without using it for about four months, then when I reused it, I found it got worse over time. I.e. first time of using it after storing,I found
    it empty, then I charged it again fully, however, then it lasted about 2 hours, then 1 and half hours, next an hour, now it is only lasting about 20 minutes without performance. If there is high performance, then
    the computer shuts down suddenly.
    My problem is follows:::
    First: Whenever I inserted any Containing Data OR  Data CD/DVD-RLightScribe discs, I found that HP optical driver was
    unable to read them. When clicking on the optical disc drive 'double-click' while disc was inserted, then I found that disc opened as this way(NOTE: With a CD/DVD player is grayed out)
    I  was told 'I suspect the culprit might be hardware and lightscribe dive might be
    corrupt. Please sent it to service center to check. In addition, this thread could be as a reference:
    http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/media-in-cddvd-drive-is-not-readable/794fe26a-7e47-45c4-a50b-0af2ed53f75b'
    Since no one replied to me at HP forums, although my HP laptop is one of their products, I had to post my problem here to know if my driver is corrupted and needs to be replaced or not.
    Blank Or Used(containg data) CD/ DVD ±R/RW lightscirbe is unable to be read by optical drive
    When clicking on drive 'duble-click', I found it opens  like a USB FlashDrive or With a CD,DVD player, however,
    : Bare in mind that 'with CD/DVD Player'
    is grayed out)
    Not Blank(containing data) CD/ DVD ±R/RW NON -Lightscirbe disc opens normal:
    Blank CD/ DVD ±R/RW NON-lightscirbe opens normal(Opens like
    a USB FlashDrive or With a CD,DVD)::
    My LightScribe System Software version is:
    I've tried installed the latest version of lightscribe software, then I run
    the diagnostic utility, however, the problem still persists.
    My HP CD/DVD DVDآ±R/RW specs are::
    Optical Drives
    hp CDDVDW TS-L633R
    Media Type DVD Writer
    Name hp
    CDDVDW TS-L633R
    Availability Running/Full Power
    Capabilities Random
    Access, Supports Writing, Supports Removable Media
    Read capabilities CD-R,
    CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
    DL, DVD+R DL
    Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
    DVD+RW, DVD-R DL, DVD+R DL
    Config Manager Error Code Device is working
    properly
    Config Manager User Config FALSE
    Drive E:
    Media Loaded
    FALSE
    SCSI Bus 0
    SCSI Logical Unit 0
    SCSI Port 0
    SCSI Target Id
    1
    Status OK
    Trying to solve the problem,
    I have done these steps in order::
    I tried checking with dignostic ulitiy:
    I have tried Advanced View , this is the file of output data ofdignostic utlity
    LightScribe System Software Settings:
    SOFTWARE\LightScribe\MessageDir C:\Program Files (x86)\Common Files\LightScribe\
    SOFTWARE\LightScribe\LSPrintDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintDialog.exe
    SOFTWARE\LightScribe\LSPrintingDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintingDialog.exe
    SOFTWARE\LightScribe\LsPrintLauncher C:\Program Files (x86)\Common Files\LightScribe\LSPrintLauncher.dll
    SOFTWARE\LightScribe\ResourceDir C:\Program Files (x86)\Common Files\LightScribe\res
    SOFTWARE\LightScribe\LSPrintAPI C:\Program Files (x86)\Common Files\LightScribe\LSPrintAPI.dll
    SOFTWARE\LightScribe\Update\UpdateShellCommand http://www.lightscribe.com/go/downloads/windows
    SOFTWARE\LightScribe\Update\PreviousVersion 1.18.20.1
    SOFTWARE\LightScribe\Update\CurrentVersion 1.18.27.10
    SOFTWARE\LightScribe\Update\TrailingVersion
    SYSTEM\CurrentControlSet\Services\LightScribeService\Type 16
    SYSTEM\CurrentControlSet\Services\LightScribeService\Start 2
    SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl 0
    SYSTEM\CurrentControlSet\Services\LightScribeService\
    SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName LightScribeService Direct Disc Labeling Service
    SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName LocalSystem
    SYSTEM\CurrentControlSet\Services\LightScribeService\Description Used by the LightScribe software components to support 3rd party disc labeling applications using the LightScribe COM Application Programming Interface (LSCAPI). This service needs to run for LightScribe direct disc labeling to work.
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported 7
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0 IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count 2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance 2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1 SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
    SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\allocatecdroms 0
    SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
    SOFTWARE\INTEL\Intel Application Accelerator Not detected
    Drives and Media:
    Drive 0 : hp CDDVDW TS-L633R 0300 219 (E:), Media Imaging Parameter : 114
    I tried running the below command line to fix potential disk issue 'Chkdsk/r /f'
    I cleaned the drive, discs, and so on.
    I have uninstalled the all third-party data recording software.
    I have uninstalled the Cyber DVD suite, lightscribe system software
    which came pre-installed with my HP pavilion Notebook.
    I have recovered my system from the HP Factory Recovery discs.
    I have tried opening all those LightScibe discs not opening on my HP optical drive, on a Dell optical drive, and all of them were opened well, although Dell optical drive did not have a lightscribe feature at all., nor  third party disc recording software.
    However, the problem is still with opening the discs LIGHT-SCRIBE.
    Thus, my questions are:
    How to determine if the drive is corrupted and needs to be replaced with another one.
    I think there something needed to be done on the BIOS Of my HP laptop[[[A similar problems happened on my Desktop computer's optical drive which is as follows (ALL discs are opened as empty by Optical Drive of My Desktop Computer) ---while
    my optical drive of my desktop was connected to the
    primary slave IDE, and the HDD was connected to the primary master IDE, the optical drive and hard disk are functioning well. However, I remember that while burning an image with Nero essential V: 5, something went wrong, and
    then the Optical Drive of My Desktop Computer (HL-DT-ST DVD-RAM GH22NP20) became NOTrecognised/Installed on
    BIOS, although it was still shown on the device manager as a recognised device. Also, it was listed on my computer, however, when entering a disc(blank or with data) into the drive, I found it was not recognised, and it opened empty(no files
    at it), although it contains data. Thus, I decided to boot to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was still shown as installed on BIOS.  However, the optical drive was not. Th I tried clicking on it on BIOS and then
    clicking on 'enter' to try to let the device be re-recognized. However, that
    made no difference. I had to take part my computer ,and then reconnected the optical drive onto thesecondary slave IDE , and let HDD connected to the same
    primary master IDE. Then, I found that the problem solved and all discs were read normally. Aslo, optical drive became installed on BIOS.
    What is meant with with double Layer Support.
    How much does it cost?
    A man should convert his anger and sadness into strength to continue living in this life.

    Did you try unsinatalling LightScribe application then checking the status ? 
    This is probably related to the faulty hardware or the application ( LightScribe
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.
    Could you please really concentrate with me, and really reply to me to finish this problem pending.
    If you had had a look again at my first post, you would have seen that I said that I have done some things, among of which is: I have uninstalled the Cyber DVD suite, lightscribe system software
    which came pre-installed with my HP pavilion Notebook.
    Yes, you're right the two threads below are concerned about one issue.
    https://social.technet.microsoft.com/Forums/en-US/w7itpromedia/thread/5c1aa5e8-9728-492b-a5c3-387f29ee4b6e/#d6f63628-29a3-4adf-b33f-03b33c138910
    https://social.technet.microsoft.com/Forums/windows/en-US/683997ff-1004-4579-b69d-5e982746c917/lightscribe-supermulti-dvdrrw-with-double-layer-support-is-no-longer-able-to-read-all-lightscribe?forum=w7itpromedia
    However, this thread contains more precise details and screen shots about the problem. I was not able to understand whether all lightscribs were not unable to be read or not. However, I now recognized that, and I recognized that only all LightScribe(empty
    or used) discs are unable to be read. furthermore, that other thread got far too longer to be followed.
    Moreover, I would like you to take some time out to answer my problem about Lighstscribe discs since I am going to purchase 'A battery, Cooling Fan' From the HP agent in Yemen, which is far away from me about 1000 Km. Thus, If my optical disc drive was corrupted
    as well, then I would be requesting the 'optical disc  drive' as well from the HP along with 'Battery, Cooling Fan' .
    A man should convert his anger and sadness into strength to continue living in this life.

  • Are plugins able to create graphical controls children to the Acrobat/Reader application?

    Hello,
    in the documentation I read　
      Acrobat Viewer layer 
    The Acrobat Viewer (AV) layer enables plug-ins to control Acrobat and modify its user interface. Using AV methods, you can, for example, add menus and menu commands, add buttons to toolbars, open and close files, display simple dialog boxes, and perform many other application-level tasks.
    I ask if it is possible that a plugin creates a graphical control like others applications can usually do and put it as a legitimate child of the Acrobat/Reader application, for example over a pdf page, and get events and so on.
    Thanks in advance

    Sure.
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Wed, 26 Oct 2011 03:33:53 -0700
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: are plugins able to create graphical controls children to the Acrobat/Reader application?
    are plugins able to create graphical controls children to the Acrobat/Reader application?
    created by DevAcro<http://forums.adobe.com/people/DevAcro> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3990771#3990771

  • HT201070 there is no camera raw support for Leaf Aptus-II 8? I need to be able to read MOS files

    there is no camera raw support for Leaf Aptus-II 8? I need to be able to read MOS files

    OS X Mountain Lion: Supported digital camera RAW formats seems to indicate that you are correct.
    Are you are trying to provide  Apple - Aperture - Feedback or Apple - iPhoto - Feedback?
    If so, use you can send direct feedback via the above link(s).  You will not likely get a direct response, but you can be certain that the responsible Apple people  will see your input for consideration in future product development.
    If you seek a solution rather than to offer feedback, or until Apple supports your needs within the Mac OS, check whether Mamiya's Leaf RAW converter 1.2.6 for Mac meets your needs.
    Message was edited by: EZ Jim
    Mac OSX 10.8.4

  • Java able to read PKI from Mozilla

    I need to have my java Swing application able to use PKI authenticate for User Login. My application is running on Linux. I'm not able to have my application read PKI from Mozilla. It is able to read PKi certificate from IE on Window.
    I follow the instruction from http://download.oracle.com/javase/6/docs/technotes/guides/deployment/deployment-guide/keystores.html to install JSS in Mozilla , and it still doesn't work.
    Any suggestion/help will be big support for me.
    Thanks,

    A private-key and its corresponding digital certificate in any keystore - including the Java Keystore can be used for all types of applications that use HTTPS - including web-services; it is not an exclusive feature of Firefox.
    If your plan is to load every users key and certificate from a common keystore, have you considered that a user may be able to masquerade as any user whose key/certificate is within the keystore and defeat the purpose of authentication? The goal of a Public Key Infrastructure is to provide strong-authentication. This is only possible if you use the technology with the appropriate controls - in this case, ensuring that every user's keys/certificate are maintained separately and securely. This implies that every user's keys/certificate must be loaded individually when authenticating them to the remote server. To put all their keys/certificates in a single keystore (if I understand your implementation goals correctly) is to defeat the very security that a PKI enables.
    Arshad Noor
    StrongAuth, Inc.

  • HT4539 i want to by an ebook in Greek for How to Use the MacOS Lion but i want to download it on a mac book pro 10.7.4 will i be able to read it????

    i want to by an ebook in Greek  from iTunes explaning the use for the Lion,but iam not sure if ill be able to read it on my Mac book pro 10.7.4 can you help me with an answer?????

    You would have to change the iTunes country in order to download the eBook in Greek, but there's a problem with that.
    Your credit or debit card credentials must be associated with the same country where you reside.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    Keep in mind, iBooks available from the iTunes store cannot be used on your Mac. Two different operating systems. iOS vs Mac OS X.

  • OIM 11G-prepop adapters not able to read from User form

    When I try to auto provision ldap account for users after creation of OIM record using GTC, the ldap provisioning doesnt happen. Basically the prepop adapters not able to read from Xel user form. I am stuck with this issue for a while now .
    I tried remapping..ect etc..ntng helped.
    None of the process form fields are getting prepopulated, when I hard coded avlue in prepop adapters for all the reqd fields in process form, proviosioning gets completed successfully.
    Pls. help me with this.
    Thanks.
    ~VSN
    I get the below errorr:
    <BEA-000000> <Class/Method: tcAdapterExecuter/executeRuleGenerators encounter some problems: java.lang.Exception: Error retrieving user info: User Login
    java.lang.Exception: java.lang.Exception: Error retrieving user info: User Login
    at java.lang.Throwable.<init>(Throwable.java:67)
    at com.thortech.xl.dataobj.rulegenerators.tcAdapterExecuter.executeRuleGenerators(tcAdapterExecuter.java:205)
    at com.thortech.xl.dataobj.util.tcPrePopulateUtility.setDataFromAdapter(tcPrePopulateUtility.java:1020)
    at com.thortech.xl.dataobj.util.tcPrePopulateUtility.prePopulate(tcPrePopulateUtility.java:346)
    at com.thortech.xl.dataobj.util.tcOrderPackages.computeProcessFormData(tcOrderPackages.java:901)
    at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(tcOrderPackages.java:423)
    at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForUser(tcOrderPackages.java:177)
    at com.thortech.xl.dataobj.tcOIU.provision(tcOIU.java:563)
    at com.thortech.xl.dataobj.tcOIU.eventPostInsert(tcOIU.java:303)
    at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
    at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
    at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2905)
    at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(tcUserProvisionObject.java:283)
    at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:591)
    at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
    at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:104)
    at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:35)
    at sun.reflect.GeneratedMethodAccessor1831.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:600)
    at oracle.iam.platform.kernel.impl.EventHandlerDynamicProxy.invoke(EventHandlerDynamicProxy.java:30)
    at $Proxy284.execute(Unknown Source)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runActionEvents(OrchProcessData.java:1035)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:644)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
    at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:686)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.notifyParentProcess(OrchestrationEngineImpl.java:828)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:771)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
    at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:674)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:705)
    at oracle.iam.platform.kernel.impl.OrhestrationAsyncTask.execute(OrhestrationAsyncTask.java:108)
    at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:100)
    at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:70)
    at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)
    at sun.reflect.GeneratedMethodAccessor2150.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:600)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:148)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy382.onMessage(Unknown Source)
    at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
    at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
    at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
    at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
    at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
    at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
    at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
    at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    Kevin,
    For manual Proviosioning - It works fine.
    It fails when I create user in OIM using flat file GTC . I have an access policy to auto proviosion that user with ldap.
    As mentioned before, I notice none of the prepops on Ldap process form are able to read value from Xel user form.
    Steps I tried Already:
    1- Checking access policy
    2-remapping process form adapters
    Pls. let me know ur thoughts.
    ~VSN

  • Superdrive not able to read DVDs or CDs

    I'm having an iMac G5, running MacOs 10.4.3 with an Matshita DVD-R UJ-846. Since quite some time now I'm not able to read inserted DVDs or CDs. Either a dialogue box appears telling me I've inserted a blank disk or nothing appears and I have to find another way to eject the disk again. I have no clue whether the drive is ruined or I simply need another newer driver. Please, can anyone help? Cheers!

    Another help source (if you haven't already done so).
    Go to your OS Help Menu. In the search field type dvd
    Click on all the troubleshooting topics & Support Articles that pertain to your issue.
    You can also do the same in Disk Utility. Open same up.
    At the bottom left of the window, click on the purple button w/the "?" in the middle.
    This will bring up the Help Menu.
    ===============
    Sometimes, repairing permissions & restarting your computer helps.
    Try a different brand. Top forum favorites
    CDs
    FUJI
    TDK
    Verbatim
    DVDs
    Maxell
    Make sure the DVDs are not dirty, smudged and/or scratched.
    http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
    http://docs.info.apple.com/article.html?artnum=88338 What to do if your computer won't recognize a FireWire or USB device
    Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
    TIP: Update your OS to 10.4.11 along w/all the applicable updates through Software Update. Any reason why you are using such an outdated OS?

  • After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and conver

    After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.

    You should install Camera Raw 4.6.
    Visit this page and follow the instructions carefully:
    PC:    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
    Mac:  http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
    -Noel

  • Hi there, I need to be able to read raw files from an Olympus Stylus 1 via CS5 and Lightroom 4.  I have downloaded Raw file plug-in v 6.7.1 but still can't read the files.

    Hi there, I need to be able to read raw files from an Olympus Stylus 1 via CS5 and Lightroom 4.  I have downloaded Raw file plug-in v 6.7.1 but still can't read the files?

    Read this table http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    The Olympus Stylus 1 was first supported in Camera Raw 8.3 which is only compatible with CS6 and CC.
    It is not compatible with CS5 or older and never will be.
    If you do not want to upgrade to CS6 or CC then you can dwonload the free Adobe DNG converter, convert all Stylus 1 Raw files to DNGs then edit the DNGs in CS5.
    Camera raw, DNG | Adobe Photoshop CC

  • Send 102 bit data through the LPT port??I have to send 102 bit to my interface board using the LPT port, through one of the data line and be able to read data from the input line, I don't know how to realize such a task.Thanks

    Let me describe you the program I have to write:
    I have to send 102 bit serialy using one of the data line of the LPT port to a device and be able to read back data sent from a device register throug one one of the input port pin for instance pin 10 of a DB25, and synchronize the transmission by the PC clock(for write and read). If fact I am using 5 output control(D0...D4) signal from the LPT port, RST, TXD, CLK, CE,TEST, one input data RXD (pin10)
    So the program should work in normal mode (write data, read data), and test mode (use the write p
    rocedure). Since I am quite new in Labview I am little lost and I need some support or exemple that use a way to send more than 32 bit via one data line(in my case 102bit= 8 bit COMMAD(MSB)+88 bit SPI DATA+6 bits CRC(LSB)) and be able to read them back, place them in the register and be able either to monitor or modify them.
    I know that there are plenty of exemple but if I can gain time by being helped it would be great.
    Can you please advise?

    Hi Beni,
    find attached a SPI.vi - minor changed from one of
    my typical SPI's (LabVIEW 7.1). With some simple changes it will fit to your application.
    The only thing you need to do - prepare
    the bits for the input-array.
    If you need some more comments - find one of my email
    adresses in documentation of this vi.
    Regards
    Werner
    Attachments:
    102bit_SPI.zip ‏90 KB

  • After running ridc to checkin file into Oracle Content Center Server there is error: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line

    Hi,
       I use ridc to check in file into Oracle Center Content server. There is no problem at the beginning. But after running for several days, there is following error.
    I must restart my program to solve this issue.
       Can anyone help me solve this problem?
    Thanks,
    Tony
    2013-07-11 12:24:31,189 ERROR [BatchEventHandler] com.edocs.common.api.integration.contmgmt.ContentException: oracle.stellent.ridc.protocol.ProtocolEx
    ception: java.io.IOException: Input terminated before being able to read line
            at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:95)
            at com.edocs.common.reporting.batch.BatchEventHandler.processBatchRequest(BatchEventHandler.java:284)
            at com.edocs.common.reporting.batch.BatchEventHandler.service(BatchEventHandler.java:138)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.executeInternal(BatchReportProcessorTask.java:156)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.doProcessTask(BatchReportProcessorTask.java:68)
            at com.edocs.pwc.tasks.CommonTask.processTask(CommonTask.java:166)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.__WL_invoke(Unknown Source)
            at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.processTask(Unknown Source)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl_WLSkel.invoke(Unknown Source)
            at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
            at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
            at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
            at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
            at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line
            at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:149)
            at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
            at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:81)
            ... 17 more
    Caused by: java.io.IOException: Input terminated before being able to read line
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readLine(HdaBinderSerializer.java:371)
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readToEnd(HdaBinderSerializer.java:335)
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:165)
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:71)
            at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:126)
            ... 19 more
    2013-07-11 12:24:33,005 ERROR [BatchEventHandler] com.edocs.common.api.integration.contmgmt.ContentException: oracle.stellent.ridc.protocol.ProtocolEx
    ception: java.io.IOException: Input terminated before being able to read line
            at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:95)
            at com.edocs.common.reporting.batch.BatchEventHandler.processBatchRequest(BatchEventHandler.java:284)
            at com.edocs.common.reporting.batch.BatchEventHandler.service(BatchEventHandler.java:138)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.executeInternal(BatchReportProcessorTask.java:156)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.doProcessTask(BatchReportProcessorTask.java:68)
            at com.edocs.pwc.tasks.CommonTask.processTask(CommonTask.java:166)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.__WL_invoke(Unknown Source)
            at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.processTask(Unknown Source)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl_WLSkel.invoke(Unknown Source)
            at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
            at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
            at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
            at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
            at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line
            at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:149)
            at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
            at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:81)
            ... 17 more
    Caused by: java.io.IOException: Input terminated before being able to read line
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readLine(HdaBinderSerializer.java:371)
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readToEnd(HdaBinderSerializer.java:335)
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:165)
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:71)
            at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:126)
            ... 19 more
    2013-07-11 12:24:37,870 ERROR [BatchEventHandler] com.edocs.common.api.integration.contmgmt.ContentException: oracle.stellent.ridc.protocol.ProtocolEx
    ception: java.io.IOException: Input terminated before being able to read line
            at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:95)
            at com.edocs.common.reporting.batch.BatchEventHandler.processBatchRequest(BatchEventHandler.java:284)
            at com.edocs.common.reporting.batch.BatchEventHandler.service(BatchEventHandler.java:138)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.executeInternal(BatchReportProcessorTask.java:156)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.doProcessTask(BatchReportProcessorTask.java:68)
            at com.edocs.pwc.tasks.CommonTask.processTask(CommonTask.java:166)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.__WL_invoke(Unknown Source)
            at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.processTask(Unknown Source)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl_WLSkel.invoke(Unknown Source)
            at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
            at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
            at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
            at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
            at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line
            at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:149)
            at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
            at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:81)
            ... 17 more
    Caused by: java.io.IOException: Input terminated before being able to read line
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readLine(HdaBinderSerializer.java:371)
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readToEnd(HdaBinderSerializer.java:335)
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:165)
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:71)
            at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:126)
            ... 19 more
    2013-07-11 12:24:39,722 ERROR [BatchEventHandler] com.edocs.common.api.integration.contmgmt.ContentException: oracle.stellent.ridc.protocol.ProtocolEx
    ception: java.io.IOException: Input terminated before being able to read line
            at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:95)
            at com.edocs.common.reporting.batch.BatchEventHandler.processBatchRequest(BatchEventHandler.java:284)
            at com.edocs.common.reporting.batch.BatchEventHandler.service(BatchEventHandler.java:138)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.executeInternal(BatchReportProcessorTask.java:156)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.doProcessTask(BatchReportProcessorTask.java:68)
            at com.edocs.pwc.tasks.CommonTask.processTask(CommonTask.java:166)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.__WL_invoke(Unknown Source)
            at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.processTask(Unknown Source)
            at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl_WLSkel.invoke(Unknown Source)
            at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
            at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
            at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
            at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
            at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line
            at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:149)
            at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
            at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:81)
            ... 17 more
    Caused by: java.io.IOException: Input terminated before being able to read line
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readLine(HdaBinderSerializer.java:371)
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readToEnd(HdaBinderSerializer.java:335)
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:165)
            at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:71)
            at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:126)
            ... 19 more

    The following is my testing code.
    package ebilling;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.FileOutputStream;
    import java.io.InputStream;
    import java.io.OutputStream;
    import java.security.SecureRandom;
    import java.text.SimpleDateFormat;
    import java.util.ArrayList;
    import java.util.Calendar;
    import java.util.List;
    import java.util.Properties;
    import java.util.concurrent.LinkedBlockingQueue;
    import java.util.concurrent.ThreadPoolExecutor;
    import java.util.concurrent.TimeUnit;
    import oracle.stellent.ridc.IdcClient;
    import oracle.stellent.ridc.IdcClientManager;
    import oracle.stellent.ridc.IdcContext;
    import oracle.stellent.ridc.model.DataBinder;
    import oracle.stellent.ridc.model.DataObject;
    import oracle.stellent.ridc.model.DataResultSet;
    import oracle.stellent.ridc.model.TransferFile;
    import oracle.stellent.ridc.protocol.ServiceResponse;
    import org.apache.commons.lang.StringUtils;
    public class UCMContentManager {
         * Check in a file into a Oracle WebCenter Content Server and return content id of uploaded content item in Oracle WebCenter Content Server.    
         * @param properties        The Oracle WebCenter Content Server connection properties.
         * @param contentFile       This file will be checked in a Oracle WebCenter Content Server.
         * @param path              The location path of checked in file in Oracle WebCenter Content Server. This path includes the file name.<br>
         *                             For example, "/folder1/folder2/file1.txt". The "file1.txt" is the file name part. <br>
         *                             The file name will be used as dDocName in Oracle WebCenter Server. It must be unique.<br>
         * @throws ContentException The exception when uploading file into Oracle WebCenter Content Server.
         * @return                  The content id of uploaded content item in Oracle WebCenter Content Server.
        public String saveContent(Properties properties, File contentFile, String path) throws ContentException{
            if(path.endsWith(SLASH)) {
                throw new ContentException("Require file name in Content Management Server");
            if(!path.startsWith(SLASH)) {
                throw new ContentException("The file store path in Content Management Server should be absolute.");
            if (path.indexOf("//") != -1) {
                path = path.replace("//", SLASH);
            String[] paths = path.split(SLASH);       
            String[] parents = new String[paths.length - 1];
            String itemName = paths[paths.length-1];
            System.arraycopy(paths, 0, parents, 0, paths.length-1);
            ServiceResponse response = null;
            try {
                IdcClientManager manager = new IdcClientManager();
                IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
                client.getConfig().setProperty ("http.library", "apache4");
                String user = properties.getProperty(USERNAME_PROPERTY);
                String pwd = properties.getProperty(PASSWORD_PROPERTY);
                IdcContext connectionContext = new IdcContext(user, pwd);
                pwd = null;
                //create the parent folders if they don't exist
                String folderGUID = makeFolders(properties, parents);
                //check in the file
                DataBinder requestData = client.createBinder();
                requestData.putLocal("IdcService", "CHECKIN_UNIVERSAL");
                requestData.putLocal("IsJava", "1");
                requestData.putLocal("dDocName", itemName);           
                requestData.putLocal("dDocTitle", itemName);           
                requestData.putLocal("dDocType", "Binary");
                requestData.putLocal("dSecurityGroup", "Public");
                requestData.addFile("primaryFile", new TransferFile(contentFile));
                response = client.sendRequest(connectionContext, requestData);           
                DataBinder responseData = response.getResponseAsBinder();
                //String did = responseData.getLocal("dID");           
                String dDocname = responseData.getLocal("dDocName");
                closeResponse(response);
                //link the file in a folder
                requestData = client.createBinder();
                requestData.putLocal("IdcService", "FLD_CREATE_FILE");
                requestData.putLocal("fParentGUID", folderGUID);
                String fileType = "owner";
                requestData.putLocal("fFileType", fileType);           
                requestData.putLocal("dDocName", dDocname);           
                response = client.sendRequest(connectionContext, requestData);
                return dDocname;
            } catch (Throwable e) {
                throw new ContentException(e);
            } finally{
                closeResponse(response);
        public void deleteContent(Properties properties, String contentId) throws ContentException{
            List<String> didList = getDIds(properties, contentId);
            contentId = contentId.toUpperCase();
            ServiceResponse    response = null;
            try {           
                IdcClientManager manager = new IdcClientManager();
                IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
                client.getConfig().setProperty ("http.library", "apache4");
                String user = properties.getProperty(USERNAME_PROPERTY);
                String pwd = properties.getProperty(PASSWORD_PROPERTY);
                IdcContext connectionContext = new IdcContext(user, pwd);
                pwd = null;
                DataBinder requestData = null;
                for(int i=0; i<didList.size(); i++) {
                    String did = didList.get(i);
                    requestData = client.createBinder();
                    requestData.putLocal("IdcService", "DELETE_DOC");
                    requestData.putLocal("dDocName", contentId);               
                    requestData.putLocal("dID", did);   
                    response = client.sendRequest(connectionContext, requestData);
                    closeResponse(response);
                    //delete parent folder
    //                try {
    //                    requestData = client.createBinder();           
    //                    requestData.putLocal("IdcService", "FLD_DELETE");       
    //                    requestData.putLocal("item1", "path:" + parentPath);
    //                    requestData.putLocal("constructDialog", "1");
    //                    response = client.sendRequest(connectionContext, requestData);
    //                } catch (Exception e) {
    //                    // TODO: handle exception
            } catch (Exception e) {
                throw new ContentException(e);
            } finally {
                closeResponse(response);
        public int getFileCountInFolder(Properties properties, String path) throws ContentException{
            ServiceResponse    response = null;
            try {
                IdcClientManager manager = new IdcClientManager();
                IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
                client.getConfig().setProperty ("http.library", "apache4");
                String user = properties.getProperty(USERNAME_PROPERTY);
                String pwd = properties.getProperty(PASSWORD_PROPERTY);
                IdcContext connectionContext = new IdcContext(user, pwd);
                pwd = null;
                DataBinder binder = client.createBinder();
                binder.putLocal("IdcService", "FLD_BROWSE");
                binder.putLocal("path", path);
                response = client.sendRequest(connectionContext, binder);
                DataBinder result = response.getResponseAsBinder();
                String num = result.getLocal("numFiles");
                return Integer.parseInt(num);
            catch (Exception e) {
                throw new ContentException(e);
            } finally {
                closeResponse(response);
        private String getFolderGUID(Properties properties, String path) throws ContentException {
            ServiceResponse    response = null;       
            String tmpFolderGUID = null;
            try {
                IdcClientManager manager = new IdcClientManager();
                IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
                client.getConfig().setProperty ("http.library", "apache4");
                String user = properties.getProperty(USERNAME_PROPERTY);
                String pwd = properties.getProperty(PASSWORD_PROPERTY);
                IdcContext connectionContext = new IdcContext(user, pwd);
                pwd = null;   
                DataBinder requestData = client.createBinder();
                requestData.putLocal("IdcService", "FLD_INFO");
                requestData.putLocal("path", path);       
                response = client.sendRequest(connectionContext,
                        requestData);
                DataResultSet result = response.getResponseAsBinder().getResultSet("FolderInfo");
                tmpFolderGUID = result.getRows().get(0).get("fFolderGUID")
                    .toString();
                if(StringUtils.isBlank(tmpFolderGUID))
                    tmpFolderGUID = null;           
            } catch (Exception e) {               
            } finally {
                closeResponse(response);
            return tmpFolderGUID;
        public boolean deleteFolder(Properties properties, String path) throws ContentException {
            if(getFolderGUID(properties, path)==null)       
                return false;
            int fileCount = getFileCountInFolder(properties, path);
            ServiceResponse    response = null;
            if(fileCount==0) {
                try {
                    IdcClientManager manager = new IdcClientManager();
                    IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
                    client.getConfig().setProperty ("http.library", "apache4");
                    String user = properties.getProperty(USERNAME_PROPERTY);
                    String pwd = properties.getProperty(PASSWORD_PROPERTY);
                    IdcContext connectionContext = new IdcContext(user, pwd);
                    pwd = null;               
                    DataBinder binder = client.createBinder();   
                    binder.putLocal("IdcService", "FLD_DELETE");       
                    binder.putLocal("item1", "path:" + path);
                    binder.putLocal("constructDialog", "1");
                    response = client.sendRequest(connectionContext, binder);
                    return true;
                catch (Exception e) {
                    throw new ContentException(e);
                } finally {
                    closeResponse(response);
            } else {
                return false;
        private String buildPath(String[] arr, int i) {
            StringBuilder buf = new StringBuilder();
            for(int j=0; j<=i; j++) {
                buf.append(arr[j]);
                buf.append(SLASH);
            return buf.toString();
        private String makeFolders(Properties properties, String[] paths) throws ContentException{
            String folderGUID = "";
            ServiceResponse response = null;
            try {
                IdcClientManager manager = new IdcClientManager();
                IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
                client.getConfig().setProperty ("http.library", "apache4");
                String user = properties.getProperty(USERNAME_PROPERTY);
                String pwd = properties.getProperty(PASSWORD_PROPERTY);
                IdcContext connectionContext = new IdcContext(user, pwd);
                pwd = null;
                String parentFolderGUID = null;
                for(int i=0; i<paths.length; i++) {
                    String fullPath = buildPath(paths, i);
                    DataBinder requestData = null;                   
                    parentFolderGUID = folderGUID;
                    folderGUID = getFolderGUID(properties, fullPath);
                    boolean exists = folderGUID!=null;
                    DataResultSet result = null;               
                    if(!exists) {
                        //create new folder
                        try {
                            requestData = client.createBinder();                   
                            requestData.putLocal("IdcService", "FLD_CREATE_FOLDER");
                            requestData.putLocal("fParentGUID", parentFolderGUID);
                            requestData.putLocal("fFolderName", paths[i]);
                            response = client.sendRequest(connectionContext, requestData);
                        } finally {
                            closeResponse(response);
                        //retrieve folderGUID of new folder
                        folderGUID = getFolderGUID(properties, fullPath);                   
            } catch (Throwable e) {
                throw new ContentException(e);
            } finally{
                closeResponse(response);
            return folderGUID;
        public List<String> getDIds(Properties properties, String contentId) throws ContentException{
            contentId = contentId.toUpperCase();
            List<String> didList = new ArrayList<String>();
            ServiceResponse    response = null;
            try {
                IdcClientManager manager = new IdcClientManager();
                IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
                client.getConfig().setProperty ("http.library", "apache4");
                String user = properties.getProperty(USERNAME_PROPERTY);
                String pwd = properties.getProperty(PASSWORD_PROPERTY);
                IdcContext connectionContext = new IdcContext(user, pwd);
                pwd = null;
                DataBinder requestData = null;
                requestData = client.createBinder();
                requestData.putLocal("IdcService", "GET_SEARCH_RESULTS");
                requestData.putLocal("SortField", "dInDate");
                requestData.putLocal("SortType", "DESC");
                requestData.putLocal("QueryText", "dDocName <matches> `" + contentId +"`");
                response = client.sendRequest(connectionContext, requestData);
                DataBinder result = response.getResponseAsBinder();
                DataResultSet resultSet = result.getResultSet("SearchResults");
                for (DataObject dataObject : resultSet.getRows()) {
    //                System.out.println("ID : " + dataObject.get("dID")+" dDocName : "
    //                        + dataObject.get("dDocName") + " Title : " + dataObject.get("dDocTitle")
    //                        + " Author : " + dataObject.get("dDocAuthor") + " Security Group : "
    //                        + dataObject.get("dSecurityGroup"));
                    String did = dataObject.get("dID");
                    didList.add(did);
                    //break;
            } catch (Exception e) {
                throw new ContentException(e);
            } finally{
                closeResponse(response);
            return didList;
         * Get the file content represented by contentId from a Oracle WebCenter Content Server.
         * The return value is the input stream of retrieved file content.
         * @param properties        The Oracle WebCenter Content Server connection properties.
         * @param contentId         The Content ID for the content item in Oracle WebCenter Content Server.
         * @throws ContentException The exception when retrieving content from Oracle WebCenter Content Server.
         * @return                  The input stream of retrieved file content.
        public InputStream retrieveContent(Properties properties, String contentId) throws ContentException{
            try {
                return new FileInputStream(retrieveContentFile(properties, contentId));
            } catch (Throwable e) {
                throw new ContentException(e);
        public File retrieveContentFile(Properties properties, String contentId) throws ContentException {
            contentId = contentId.toUpperCase();
            ServiceResponse response = null;
            try {
                IdcClientManager manager = new IdcClientManager();
                IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
                client.getConfig().setProperty ("http.library", "apache4");
                String user = properties.getProperty(USERNAME_PROPERTY);
                String pwd = properties.getProperty(PASSWORD_PROPERTY);
                IdcContext connectionContext = new IdcContext(user, pwd);
                pwd = null;
                DataBinder binder = client.createBinder();
                binder.putLocal("IdcService", "GET_FILE");
                //binder.putLocal("dID", dID);
                binder.putLocal("dDocName", contentId);
                binder.putLocal("RevisionSelectionMethod", "Latest");
                response = client.sendRequest(connectionContext, binder);
                InputStream in = null;
                OutputStream out = null;
                String edxhome = System.getProperty("edx.home");
                File tmpParent = new File(edxhome);
                tmpParent = new File(tmpParent, "Output");
                tmpParent = new File(tmpParent, "tmp");
                tmpParent.mkdirs();
                File tmpFile = File.createTempFile("down_", "_ucm", tmpParent);
                tmpFile.deleteOnExit();
                try {
                    in = response.getResponseStream();
                    out = new FileOutputStream(tmpFile);
                    byte[] buf = new byte[1024];
                    int read = -1;
                    while((read = in.read(buf))!=-1) {
                        out.write(buf, 0, read);
                } finally{
                    try {
                        if(in!=null)
                            in.close();
                    } catch (Exception e2) {
                    try {
                        if(out!=null)
                            out.close();
                    } catch (Exception e2) {
                return tmpFile;
            } catch (Throwable e) {
                throw new ContentException(e);
            } finally{
                closeResponse(response);
        private void closeResponse(ServiceResponse response) {
            if(response!=null) {
                try {
                    response.close();
                } catch (Exception e) {
        private static final String SLASH = "/";   
        private static final String URL_PROPERTY = "contentServerURL";
        private static final String USERNAME_PROPERTY = "contentServerUser";
        private static final String PASSWORD_PROPERTY = "contentServerPassword";
        static volatile boolean flag = false;
        static class UploadTask implements Runnable{
            public void run() {           
                try {
                    while(!flag) {
                        UCMContentManager manager = new UCMContentManager();
                        Properties properties = new Properties();
                        properties.put(URL_PROPERTY, "https://slc402124:16201/cs/idcplg");
                        properties.put(USERNAME_PROPERTY, "weblogic");
                        properties.put(PASSWORD_PROPERTY, "weblogic1");
                        File contentFile = new File("C:/toding/mypro/UCM/test.txt");
                        String parentPath = "/new/test/multiThreadUpload/";
                        String location = makePath(parentPath);
                        manager.saveContent(properties, contentFile, location);
                        System.out.println(location);
                        Thread.sleep(5000);
                } catch (Exception e) {
                    e.printStackTrace();
                    flag = true;
        public static void main(String[] args) throws Exception{
            ThreadPoolExecutor executor = new ThreadPoolExecutor(10, 10, 60, TimeUnit.SECONDS,
                     new LinkedBlockingQueue<Runnable>());
            for(int i=0; i<10; i++) {
                 UploadTask uploadTask = new UploadTask();
                 executor.execute(uploadTask);
            while(!flag) {
                Thread.sleep(5000);
            executor.shutdown();
        public static String makePath(String parentPath) {
            StringBuilder buf = new StringBuilder();
            buf.append(parentPath);
            if(!parentPath.endsWith("/")) {
                buf.append("/");
            Calendar rightNow = Calendar.getInstance();
            String pattern = "yyyyMMdd";
            SimpleDateFormat simDateForm = new SimpleDateFormat(pattern);
            String dateStr = simDateForm.format((rightNow).getTime());       
            pattern = "HHmmssSSS";
            simDateForm = new SimpleDateFormat(pattern);
            String timeStr = simDateForm.format((rightNow).getTime());
            buf.append(dateStr);
            buf.append("/");
            buf.append(timeStr);
            buf.append("_");
            buf.append(random.nextInt(10000));
            String finalLocation = buf.toString();
            return finalLocation;
        private static SecureRandom random = new SecureRandom();

Maybe you are looking for

  • Send multiple email attachments using FM SO_NEW_DOCUMENT_ATT_SEND_API1.How?

    Hi All, I have a requirement to send email to an external ID for which I am using FM SO_NEW_DOCUMENT_ATT_SEND_API1.Can anyone give a sample code to send multiple excel attachments using this function module. Points would be rewarded. Thanks Archana.

  • Classes intercommunication question

    hello folks, another newbie question: I have a JDialog with 3 components: pane with 2 JRadioButton's JButton, and JScrollPane with a JList in it elements of a Jlist are of my own class A and I am rewriting its toString() method, so elements of my cla

  • Output processing from sales documents - t-code?

    Hi, Can anyone tell me the t-code to process outputs from sales documents - order confirmations from sales orders. The one that i can use to set up a variant to use in a background job. Similar to VF31 for billing, VT70 for shipments etc. I am unable

  • Mac os classic fonts?

    Is there any way I can download the old Techno (regular) font for Leopard for free? I did it one time for free but I don't remember where I found it

  • New iPhone seems to crash constantly

    Hi, I got a 4s for Christmas and it keeps crashing. I thought it was something I was doing at first, but I constantly have to press & hold the button on top to restart the phone (with the Apple icon coming up, etc).  Is this a known issue with a fix