MIME settings for SEEBURGER SFTP channel

Can we have MIME settings for SFTP, is Attachment option in SFTP seeburger adapter same as MIME extentions

Thanks Naveen for the reply..
I missed to mention that we are working on XI3.0 with SP19 and seeburger sFTP is 1.7.4
Looks like key exchange is working properly as after every restart of adapter all failed messages are processed successfully..
It is observed that if there is an idle time of 8-10 hours between last data transfer and current data transfer then this error occurs.
We have increased connection timeout and transmission timeout parameters also for sFTP properties in visual admin.
Thanks,
Minal
Edited by: Minal Vaidya on Oct 5, 2011 8:46 AM

Similar Messages

  • Seeburger sFTP receiver adapter error: Socket Write Error, EOF Received

    Hello experts,
    We have a sFTP to sFTP scenario for which we are getting below error every time the scenario is executed.
    Error Messages are as follows:
    Put File: Could not connect to remote host, Reason: Unexpected termination; software caused connection abort; socket write error[unknown cause].
    Sometimes below error occurs :
    Put File: Could not connect to remote host, Reason: EOF received from remote side [unknown cause].
    Every time after restart of sFTP adapter on XI box, failed messages are sent successfully to receiver sFTP server.
    There is no error for sender sFTP channel. This error occurs only for the receiver sFTP channel.
    On receiver sFTP side, we are using Public key-private key authentication.
    Can anyone please let me know what could be the cause of connection failure. ?
    Thanks a lot in advance!
    (I searched many threads on SDN but could not find anything relevant to this particular situation, so posting a separate question.)
    Minal

    Thanks Naveen for the reply..
    I missed to mention that we are working on XI3.0 with SP19 and seeburger sFTP is 1.7.4
    Looks like key exchange is working properly as after every restart of adapter all failed messages are processed successfully..
    It is observed that if there is an idle time of 8-10 hours between last data transfer and current data transfer then this error occurs.
    We have increased connection timeout and transmission timeout parameters also for sFTP properties in visual admin.
    Thanks,
    Minal
    Edited by: Minal Vaidya on Oct 5, 2011 8:46 AM

  • MIME Settings Don't Work

    Hi, Since I've bought my Mac, I've had no problems playing flash content on websites with the quicktime plugin. However, for some reason, recently whenever I go to any websites with flash content, a quicktime symbol will showup with a question mark and the flash content will not play.
    This is a real hassle to me and I've tried to fix it but I don't know how. I've tried checking the MIME settings for Miscellaneous, so that it would play the flash content but it either will revert back to unchecked.
    I was hoping someone would help me fix this problem, I'm simply trying to play the flash content again on websites.
    These problems started when I installed Flip4Mac, if that would help anyone figure this out. I uninstalled Flip4Mac but that didn't fix it.
    Paul Mcgrade

    However, for some reason, recently whenever I go to any websites with flash content, a quicktime symbol will showup with a question mark and the flash content will not play.
    Did you recently upgrade your version of QT and forget to enable the Flash setting in the "QT Preferences > Advanced" window?

  • Seeburger SFTP - File Adapter -- Filename in reciever channel

    I am using a Seeburger SFTP Sender channel, and a "FILE" channel configured to use FTP.
    I need to have the FTP adapter to write the file name as it was sent by the SFTP adatper.
    I looks like I will need to use variable substitutions to do this, but I can't figure out how to populate a variable with the http://seeburger.com/xi/common/dtSubject that contains the file name from the SFTP Adapter.

    All you need is 1 UDF that retrieves the value of dynamic configuration. The name space is http://seeburger.com/xi/common/dtSubject as you said. I am not sure the technical name for FileName for Seeburger adapter. But you can see this in SXMB_MONI under the dynamic configuration node. Using this value populate the dynamic configuration with name space http://sap.com/xi/XI/System/File and technical name FileName. This represents the file name for standard File adapter.
    Regards
    Jai

  • What is "use SSL" and "S/MIME" mail settings for?

    What is "use SSL" and "S/MIME" mail settings for?

    it has do with encrypting your mail when sent over the web

  • Channel strip "settings" for aux or main out  ... not showing in Library

    Hi Guys
    One of the things I love about the "settings" box at the top of each audio channel is that you can click on it, and then use the Library list on the right of the screen to pick through the settings and even try them out in real time...
    I want to do the same thing for some of my Aux channels or even sometimes the Main Out channel, but there doesn't seem to be a way of clicking on the "settings" button for these channels and seeing what's available for them in the Library.
    Does anyone know what I'm missing here? At the moment I seem to have to HOLD the settings button, and then choose from the category and then choose the effect. Which is fine if you know what you're looking for, but if you want to just go through various effects and try them while the song plays, this is kind of tedious.
    If you can shed light on this, that would be awesome!
    Cheers,
    Mike
    PS - 8 days in to my switch from Cubase 4 to Logic 8 and the initial feeling of "what have I done? I feel lost, bring back Cubase" has turned into "Why didn't I do this sooner?!"... Logic is AMAZING! And Cubase now seems so clumsy...

    Hey Jorge,
    Thanks for the reply - yep, it's cool to be able to save strip settings for aux strips and for the main out as well, to make "my" sound and keep my songs consistent.
    However there are some really great pre-set settings for these strips. They can be accessed the "slow" way by holding the "Setting" box at the top of the strip, and then choosing a category and from there a preset.
    But I really want to be able to go through these preset strips quickly by using the Library... you can do this for normal audio channels, and it's great to say be able to click through "bass" presets one after the other while your bass audio track is playing...
    But for the aux and settings strips, I can't get the "settings" to show up as a list in the Library...
    Does anyone know how this is done?!
    Cheers and thanks,
    Mike

  • Use audio channel strip settings for instrument channel

    How can I use the library of audio channel strip settings for an an instrument channel? I use a virtual guitar (RealStrat from MusicLab) and want to apply one of those beautiful audio channel strip settings for guitars to my virtual instrument.
    Best, Dietmar

    This works great, thank You
    Is there a way to select the next audio channel strip setting with a keyboard shortcut? I can open the channel strip setting pop up menu with the option key pressed and select "Next channel strip setting" from the pop up menu, but that's not comfortable if You want to listen through 10 or 20 settings When I use the keyboard shortcut "Next channel strip setting" the next _software instrument_ channel strip setting is loaded ...
    Is there a way to make the _library display the audio channel strip settings_ for an instrument channel?
    Best, Dietmar

  • Channel Strip Settings For Voice Over

    Might have screwed something up, or forgot. I record voice overs onlyon Logic Pro. Do I set both channel strips to the left with one circle or the interlocking circles. Or do I set one circle on one and the double circles on the other? I record in mono. I notice when I use the interlocking circles there are two circles near the top. When I use only circle the larger circle near the top disappears. Confused. Just need to know what is the correct settings for VOs. I thank you for your help

    If you record in mono, all you need is the single circle. Mono track. Not L, not R, just mono.
    http://help.apple.com/logicpro/mac/10/#lgcp45c6e19a

  • Error in Sender SFTP channel[URGENT]

    Hi Experts,
    I am getting the following error in my sender SFTP channel , i am using seeburger module in Sender channel :
    Error type: TASK_ERROR >> Error date: 10/20/11 8:00 AM >> Description: File <O1110200610ZRFEDATA> could not be polled  from directory </GFS/Application_Development/F/Outbound/Data> on host <mxgfudp>; Reason: Error occured while creating callback task. [10/20/11 8:00 AM]
    Error type: COMPONENT_ERROR >> Error date: 10/20/11 8:45 AM >> Description: Could not add or update entry for filename <O1110200508ZFGLOUS_WBS_> [10/20/11 8:45 AM]
    Can some one tell what can be the root cause for this error , these channels were working fine till yesterday.

    This issue occured because of the less space on disk of production server , one the space is created the error got resolved

  • Pound Sign (u00A3) in Sender SFTP Channel  - using MessageTransormBean

    Hi,
    I am reading a csv file using Seeburger SFTP Sender Communication channel.
    One of the field has pound sign  like    £250 forTution
    With default UTF-8 codepage I am geting a square symbol instead of £ sign.
    I tried to set codepage to ISO-8859-1 and windows-1252 and other UTF code pages using MessageTransformBean's Transform.ContentType = text/xml;charset=ISO-8859-1
    They are giving some other special characters for £ sign.
    What is the correct code page we should use to read £ sign correctly into payload. Any suggestions are greatly appreciated.
    Regards,
    Ramesh

    Thank you Stefan! That helped me too. I have only one additional remark.
    My problem was that this solution didn’t work at the beginning because the line
    Plain2XML Transform.Class com.sap.aii.messaging.adapter.Conversion
    was always the first line. Every time I tried to put the ContentType line in the first row it becomes the second after saving.  So I’ve done the following trick. I added the MessageTransformBean twice with the names Plain2XML_Step1 and Plain2XML_Step2 (in this order). In the module configuration part I added the following three lines:
    Plain2XML_Step1 Transform.ContentType text/plain;charset=iso-8859-1
    Plain2XML_Step2 Transform.Class com.sap.aii.messaging.adapter.Conversion
    Plain2XML_Step2 Transform.ContentType text/xml;charset=utf-8

  • Error in Seeburger SFTP : Cannot create pending keystore PENDING/SSH_hosts

    Hi All,
               I am developing a scenario where my sender is file and receiver is SFTP. It is pass through interface and to achive SFTP i used seeburger SFTP adapter. I generated the public from the certificate and shared the key with SFTP admin.
               Now whe i test the scenario i facing the following error in the SFTP channel @ RWB. The error is
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: putFile: Could not connect to remote host; Reason: SFTP client was not able to connect: com.seeburger.sftp.exception.HostVerificationException: Cannot create pending keystore PENDING/SSH_hosts/>> Details: putFile: Could not connect to remote host; Reason: SFTP client was not able to connect: com.seeburger.sftp.exception.HostVerificationException: Cannot create pending keystore PENDING/SSH_hosts/>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: false>>Fatal: false, >> Description: putFile: Could not connect to remote host; Reason: SFTP client was not able to connect: com.seeburger.sftp.exception.HostVerificationException: Cannot create pending keystore PENDING/SSH_hosts/>> Details: putFile: Could not connect to remote host; Reason: SFTP client was not able to connect: com.seeburger.sftp.exception.HostVerificationException: Cannot create pending keystore PENDING/SSH_hosts/>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: false>>Fatal: false
    Has anyone faced the similar problem and resolved it , please help me on the same.
    Thanks,
    Siva.

    Hi Srikanth,
                        I resolved the above error by creating aview in my keystore(nwa) . Now i am facing a new error.
                       The error looks something like this:
                     Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: putFile: Could not connect to remote host; Reason: Unable to establish a connection to SSH server, the authentication has failed. Details: Server returned AUTHENTICATION_FAILED. Check user and key/password-settings.>> Details: putFile: Could not connect to remote host; Reason: Unable to establish a connection to SSH server, the authentication has failed. Details: Server returned AUTHENTICATION_FAILED. Check user and key/password-settings.>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: false>>Fatal: false, >> Description: putFile: Could not connect to remote host; Reason: Unable to establish a connection to SSH server, the authentication has failed. Details: Server returned AUTHENTICATION_FAILED. Check user and key/password-settings.>> Details: putFile: Could not connect to remote host; Reason: Unable to establish a connection to SSH server, the authentication has failed. Details: Server returned AUTHENTICATION_FAILED. Check user and key/password-settings.>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: false>>Fatal: false.
    I am using a private key authentication and I gave my SAP PI userid as User and private key as the key present in NWA.
    Can you please help me in resolving this error.
    Thanks,
    Sivarama Krishna

  • "known hosts store" parameter in SFTP channel

    Hi Experts,
    I am working on Seeburger SFTP adapter and want the information on its configuration.
    My scenario is IDOC to SFTP, I have configured the receiver SFTP channel.
    But there is a parameter 'Known hosts store' in it, please let me know what is it and what value needs to be put.
    I am using 'Password' as Authentication method.
    Your help is highly appreciated.
    -Supriya.

    Hi Supriya,
    This parameter contains the information about the path on PI server where certificates of remote hosts (server where u r actually connecting to for data transfer from PI) have been stored.
    You can check for complete path from NWA for Key storage service view paramaters. The value for this entry should start with "USERS\viewname\*".
    Please let me know if still there is an issue in understanding about this!
    Thanks,
    Anoop Garg

  • File not found error in SFTP channel

    Hi All,
    We are getting a "file not found error " while using a SFTP sender channel .
    Our Scenario :
    We are using SFTP as the source adapter .Presently we are using  two nodes for load balancing for all the sender channels.
    One of the node's of the  SFTP channel is picking the file , while the other node at the same time is throwing a "File not found error".
    The file is being picked and is placed at the target, but the channels are in error state as one of the nodes is in error state.
    Please let me know, if we did any mistake while configuring the adapter.
    Thanks,
    Yamunan

    Hi,
    Could you please check if you have provided right path in your sender communication channel...to pick the file from...
    Regards,
    Naveen.

  • Is it possible to change proxy settings for all profiles that´s created instead of the standard options. We need to change "use systems proxy" into "automatic"

    Proxy Problems
    We need to be able to change the default settings for the proxy for all profiles on our computers that´s created for new users.
    Standard is that firefox takes the option "use the system options" for the proxy. We would like it to use the option "automatic" instead like IE and Chrome does.
    Considering that we have over 500 computers doing this manually isn´t an option, because a new profile is created everytime someone logs on to a computer they haven´t used before.

    You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new default values.
    Place a file local-settings.js in the defaultspref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    pref("general.config.obscure_value", 0); // use this to disable the byte-shift
    See:
    *http://kb.mozillazine.org/Locking_preferences
    You can use these functions in mozilla.cfg:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes
    This will work for all existing and newly created profiles.

  • Plug-in for Mime files for QuickTime missing.

    I've been trying to view certain videos and listen to streaming music and sometimes it works (never that well) and other times it doesn't. I'm using QT not WM and when it works the videos don't play in the viewer. They usually download to the desktop and then have to be manually played. When it doesn't work I get a small blue box with a question mark and the following statement:
    The page has content of MIME type “application/x-mplayer2”, but you don’t have a plug-in installed for this MIME type. A plug-in should be available on this page:
    http://www.microsoft.com/windows/windowsmedia/download/default.asp.
    I can't find the correct plug-in(s) on the website. What should I do?

    Hi Jeronimo and welcome to the forums!
    These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
    It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 or 7.4 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5.2, but please see my footnote).
    Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
    RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
    The new RealPlayer Plus (v.11) is still in beta and therefore free, but works well on Tiger. It includes a download function, and you can get that here:
    http://uk.real.com/player/mac/
    Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
    Perian from http://perian.org/
    You should read this support page http://perian.org/#support in case you need to delete older codecs.
    Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS, but please see my footnote if you are running Leopard.)
    In earlier versions than QT 7.1.3 in Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
    You should also ensure, if you are running Tiger 10.4.11 or Leopard, that you have downloaded and installed the correct version for your Mac of Security Update 2007-009.1.1, which also deals with the Quicktime/Flash issues you may have experienced, such as the '?'. What happened was that both Quicktime as well as Adobe FlashPlayer tried to play the Flash video at the same time. This no longer happens. (N.B. Security Update 2007-009 1.1 requires both a restart and a permission repair.)
    If you get problems with viewing video on a website try moving this file to your Desktop:
    Hard drive/Library/Internet Plug-Ins/QuickTime Plugin.webplugin
    and then restarting Safari. If all now works, you can trash that file.
    In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
    Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
    Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
    Important: Now repair permissions and restart.
    You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.
    FOOTNOTE
    If you are running Leopard:
    Some users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1

Maybe you are looking for