Mime-type

I have set
<mime-mapping>
<extension>xml</extension>
<mime-type>text/xml</mime-type>
</mime-mapping>
in the file .\jakarta-tomcat-5.5.7\conf\web.xml.
The aim is that the field 'contet-type="text/xml"' come inside the HTTP 200 OK reply along with the XML data stream. But as far as I realize, the HTTP reply that Tomcat returns does not contain this 'content-type' field.
Do I need to configure another file to have the 'content-type'? Am I missing something?
Thank you in advance.

Thanks all,
I made it work at last, but not with Tomcat 5.5.7 integrated in the IDE, possibly the HTTP 200 OK does not contain a proper "content-type", I don't know why, I didn't check it since I'm using Internet Explorer.
In the end, I installed Tomcat 4.1.31 on another machine and configured exactly as in the IDE Tomcat 5.5.7. And my application works all right with this external Tomcat, it is reading the "content-type" as I expected.

Similar Messages

How can I use one Add-on prior to another for specific MIME-types?

I'm using Shockwave Flash plugin to watch some videos on YouTube, StreamCloud, etc. It also handles .mkv and .mp4 files/streams. After installing VLC Web plugin to handle MIME-types like mp3/4, mkv additionally and prior to the Flash plugin, Firefox keeps using Flash to handle those types insted. I cannot find options to set the desired priorities. Only disabling the Flash plugin solves my problem, but also keeps me from watching Flash contents, which Is not acceptable.
Did I miss something or is this Firefox's fault?

If you type or paste '''about:plugins''' in the address bar and press Enter, you can see which plugins are associated which various content types.
I do not know how to prioritize one over the other for the same content type if the plugin settings (plugins often have an interface outside of Firefox to adjust their settings) do not allow that.
As for MP4, I don't think Flash normally would be selected. I suspect the website is specifying a Flash media player and streaming the MP4 through that. If you want to hide the Flash plugin from a particular website, you can use the Permissions tab of the Page Info dialog.
Click the padlock or globe icon in the address bar, then More Information, then Permissions. The top section of the Permissions panel should be "Activate Plugins". Here you can select Block for Flash for the current site. After reloading the page, does the media play using a different plugin?

Unable to launch application from my machine:Bad MIME Type

Hi,
The following error message was printed when I tried to access the SwingSet2 demo from the Java Web Start site.
An error occurred while launching/running the application.
Title: SwingSet2
Vendor: Sun Microsystems, Inc.
Category: Download Error
Bad MIME type returned from server when accessing resource: http://java.sun.com/products/javawebstart/apps/SwingSet2.jnlp - text/html
Can you please suggest what is to be done to rectufy this problem?
Regards,
Satish

Bad MIME type returned from server when accessing
resource:
http://java.sun.com/products/javawebstart/apps/SwingSet
.jnlp - text/htmlit should return application/x-java-jnlp-file.
My guess is that you use proxy which messes up headers.
Otherwise try to reinstall Web Start, then enable the console and log output in Web Start's advanced preferences to get more clues what's going on.
Regards,
Marc

How to change default application associated with some mime types?

When we install some new program, for example GIMP, I assume the newly installed program is added to some mime type database, and the /usr/share/applications/mimeinfo.cache file is automatically generated.
Using my example, GIMP will be the default application for all its registered mime types, even application/pdf. I surely don't want this to happen, and I surely don't want to create all kinds of files that GIMP registered and right click on them and choose Properties and then change it in the Open with... tab. I want to systematically de-prioritize GIMP so that it will not override my previously assigned default applications.
I wrote a script to modify the mimeinfo.cache file, and it seems to work great. However, after a reboot or upgrade or something I didn't notice, the default application of application/pdf is reconfigured to GIMP. I think the cache suffix of the file indicates that it is just a cache and may be changed by system unnoticed. So I am looking for a new way to change the default applications.
As far as I know or guess from the phenomena, there should be some system utility that generates the mimeinfo.cache file, it seems to parse all the *.desktop files under /usr/share/applications and register them to certain mime types accordingly. The sequence of the *.desktop files get parsed seems to be related to the time the application is installed, and the newly installed applications seems to be parsed later and inserted in the front of the application list or be parsed earlier and appended to the application list. Is there some place I can change the sequence of the parsing? Or is there some place I can change the behavior of the system utility?
I know that I can populate my ~/.local/share/applications/mimeapps.list to override the system wide defaults, however, I want a more elegant way to this.
Any opinion on this is welcomed.
Last edited by AugustePop (2010-05-14 05:47:15)

Ah, right. Don't know what DE you are on, but in Gnome: right-click a (e.g. pdf) file -> Preferences -> Open with.
All Applications listed there will be available from the right click menu, the marked one will be used on double-click.
errgrh...
I surely don't want to create all kinds of files that GIMP registered and right click on them and choose Properties and then change it in the Open with... tab. I want to systematically de-prioritize GIMP so that it will not override my previously assigned default applications.
I guess what I am trying to propose is this: "de-prioritize" GIMP in its .dekstop file for the types you dont want it to be associated with, and manually add it back in through "Open With" for the file types you want it to be an option. Not sure if this is solving anything for you though
Last edited by hokasch (2010-05-14 10:28:57)

File/Open Dialog Box / Setting MIME type

In my application, I am calling a web service that returns text that I need to download into an EDI application. I am simply looking to have an open/file dialog box open when the text is returned. I was using the following code in a PL/SQL process:
begin
-- Set the MIME type
owa_util.mime_header( 'application/octet', FALSE );
-- Set the name of the file
htp.p('Content-Disposition: attachment; filename="EDIOuput.edi"');
-- Close the HTTP Header
owa_util.http_header_close;
end;
The problem is the HTML code that comes along with the text that is returned. Is there a way to simple call the procedure on a page that only containes the raw data?
Thank you.

HTML doesn't provide you the possibility to select multiple files or select folders at a single browse. Thus JSF can't do any much for you. Best what you can do is to write a signed applet or web start application which does the task. The Mojarra Scales component library has a ready-to-use component which embeds an applet which does that task. Check [https://scales.dev.java.net/multiFileUpload.html].

Print HTML using JPS API.. How to configure printer MIME-TYPE as text/html

Hi All,
I have to print the HTML pages.. for this i have used JPS API , but i found that my printer doesnt supoort Mime-type(Flavour) text/html.
Can someone help me in this ...
i) Can i configure my printer for this Mime-type , if yes then HOW?
ii) Is there any work around ?
Thank you all in advance :)

I reposted this question in the Database forum. Admin can feel free to delete this thread.
The answer is to add this at the top: htp.addDefaultHTMLHdr(false);
Thanks,
T.
Edited by: 855677 on May 3, 2011 9:35 AM

How To Get FileType and MIME Type from a File

Hi,
I am using following ways to get FileType and MIME Type.
I am able to get file type, but I am getting MIME Type as */*
Can any one please let me know how to get MIME Type, but it should not be time consuming process.
For File Type I am using following Code:
private String getFileData(InputStream inStream) {
fileName = C:\temp\temp.tiff
String filePath = Util.createTempFile(fileName);
RandomAccessFile raf = new RandomAccessFile(filePath, "rw");
while (inStream.available() > 0) {
     byte[] buf = new byte[inStream.available()];
     inStream.read(buf);
     raf.write(buf);
inStream.close();
raf.close();
File file = new File(filePath);
JFileChooser chooser = new JFileChooser();
String fileType = chooser.getTypeDescription(file);
file.delete();
//MIME Type I am getting from
DataHandler data = new DataHandler(new DocumentSource(inStream));
data.getContentType();
data.getContentType() is not working well in all cases.
Can any one help me on this.
Thanks in advance,
Ram.
Edited by: javausers07 on Apr 15, 2009 4:25 PM

javausers07 wrote:
Hi,
I am using following ways to get FileType and MIME Type.
I am able to get file type, but I am getting MIME Type as */*
Can any one please let me know how to get MIME Type, but it should not be time consuming process.
For File Type I am using following Code:
private String getFileData(InputStream inStream) {
fileName = C:\temp\temp.tiff
String filePath = Util.createTempFile(fileName);
RandomAccessFile raf = new RandomAccessFile(filePath, "rw");
while (inStream.available() > 0) {
     byte[] buf = new byte[inStream.available()];
     inStream.read(buf);
     raf.write(buf);
inStream.close();
raf.close();
File file = new File(filePath);Why do you do all above?
JFileChooser chooser = new JFileChooser();
String fileType = chooser.getTypeDescription(file);
file.delete();
//MIME Type I am getting from
DataHandler data = new DataHandler(new DocumentSource(inStream));
data.getContentType();
data.getContentType() is not working well in all cases.That's because there's no way to get MIME type of all files on all filesystems.
Kaj

How to restrict uploading files by mime type?

Hi,
I have been searching the forum (and Google) looking for tips on how to ensure users can only upload files of specific formats (Word, PDF, etc) for specific document types as defined within the application (e.g. Curriculum Vitae (Word), Copy of Transcripts (PDF)).
While I have used this research to start work on a server-side solution, I would like to know if there is an apex-friendly way to "validate" a file-browse item based on mime-type.
Has anyone else had to address this?
Ted

Hi,
I would like to know if there is an apex-friendly way to "validate" a file-browse item based on mime-typeHow about, you create a check constraint on your MIMETYPE column. something similar to this:
alter table "MY_TABLE" add constraint
"MY_TABLE_CON" check ( "MIMETYPE" = 'application/pdf' or "MIMETYPE" = ......)Or you can use this plugin, provided using browsers supporting HTML 5:
http://www.theapexfreelancer.com/apex/f?p=APEXFREELANCER:FILE_UPLOAD:0
For friendly,
Please check error handling :
http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/
Best Regards,
Fateh

Need to get the MIME type of Files

hi
I have a table which contains Partno and the images name i.e PRODUCT_AWG_20070416 and the data would be like that :-
partno img_name
PX1 px1.jpeg
PX2 px2.jpeg
PX3 px3.jpeg
Now one by one i am Inserting those files into my table (img_temp -BLOB Column) which are exists in directory & the map file. but i also need to insert the MIME type of the inserted file. can you please provide me the way to generate MIME type on the basis of file type like (JPG,GIF,TXT etc).
the procedure i am using is as follows :
hi
I have a TABLE which contains Partno AND THE IMAGES NAME i.e PRODUCT_AWG_20070416 AND THE DATA would be LIKE that :-
partno img_name
PX1 px1.jpeg
PX2 px2.jpeg
PX3 px3.jpeg
Now one BY one i am INSERTING those files INTO my TABLE (img_temp -BLOB COLUMN) which are EXISTS IN DIRECTORY & THE map FILE. but i also need TO INSERT THE MIME TYPE OF THE inserted FILE. can you please provide me THE way TO generate MIME TYPE ON THE basis OF FILE TYPE LIKE (JPG,GIF,TXT etc).
the reason of this requirement is, we need to use that table in APEX 2.2 fromwhere i can download the inserted file and to download the file we need to get correct MIME_TYPE of that file.
Please Suggest me the way.
Thanks.
The Procedure which i am using is as follows :
CREATE OR REPLACE PROCEDURE img_uploader IS
CURSOR Cur_img IS SELECT part_no,image_file FROM PRODUCT_AWG_20070416
WHERE Transaction_id =1 ;
l_bfile BFILE;
l_blob BLOB;
BEGIN
FOR Cur_img_val IN Cur_img LOOP
l_bfile := BFILENAME('SOLVS_PRODUCT_IMG', Cur_img_val.image_file);
INSERT INTO img_temp (part_no,MIME_type,file_name, img)
VALUES (Cur_img_val.Part_no,NULL, Cur_img_val.image_file,EMPTY_BLOB())
RETURN img INTO l_blob;
DBMS_LOB.fileopen(l_bfile, Dbms_Lob.File_Readonly);
DBMS_LOB.loadfromfile(l_blob, l_bfile, DBMS_LOB.getlength(l_bfile));
DBMS_LOB.fileclose(l_bfile);
END LOOP ;
COMMIT;
END;

Hello,
Perhaps this can help:
http://help.sap.com/saphelp_nw04/helpdata/en/ad/ebe5cc1d75aa43a2871717d76f475d/content.htm
If you want to know the table name, turn on tracing (ST05) when accessing the MIME types.
regards
Rick Bakker
Hanabi Technology

How to get the Mime Type of the file?

Hi Everyone!,
I want to upload a random file into my table as a BLOB and simultaneously want to fill the respective another column with its MimeType. Earlier I used Oracle Apex for this, but due to my new requirement I need to make this happen with the help of PL SQL and Forms. Could you help me in getting how we can upload the file and most importantly, how we can get its Mime-Type.
My chosen file can be of any type; it can be doc ,pdf,txt,xls ,gif or any other format.
If you could provide the example with your reply then it would be great.
Thanks
Harbinder

hi
for that u have to use webutil.
declare
      f varchar2(100);
begin
     f := webutil_file.file_open_dialog();
     if f is not null then
          :doc.doc_name := f;
          end if;
     end;and
     DECLARE
filename VARCHAR2(256);
BEGIN
filename := CLIENT_GET_FILE_NAME (File_Filter => 'jpg (*.jpg)|*.*|');
READ_IMAGE_FILE(filename, 'jpg', 'image');
END; sarah

How to determine the MIME types of the files?

I'm making an application, in which I've to upload the files to the database. Now I want to insert into the database the MIME type of the files. Now how can I know that which type of the file is having which MIME type?
where can I get the list of all supported MIME types?
Even if I get the list, then every time I update the file in the database, so every time I have to check the file extension and then insert the MIME type...
this seems to be a tedioius job..
Is there any simple way to do this?

I could ask "supported by what?" but I assume you will
be the one supporting them. Here's a link to the
latest list of registered MIME types.HERE's the link...
ftp://ftp.isi.edu/in-notes/iana/assignments/media-types/media-types

How to get the MIME type of the given file in R/3

Dear Experts,
Please tell me the FM or Class to get the given file MIME type in R/3 . I am using GUI_upload Function module to upload the file in R/3 .
Edited by: balaji ramadas on Jan 16, 2009 5:39 AM

Thank you Prosenjit I m using this FM CV120_GET_MIME_TYPE
to get the MIME type of the file
regards,
Balaji.R
Edited by: balaji ramadas on Jan 19, 2009 9:24 AM

Trying to Access SharePoint 2013 Rest Api in HTML page but getting Mime Type Exception with Status Success

I am trying to invoke the SharePoint Rest Api using HTML page. I have included the Access Control Allow Origin to the web.config file. I am getting Readty State 4 and
Status Success but still I am getting the below error.
Refused to execute script from 'http://<server>/_api//web/lists?callback=jQuery172045857910416089_1430217181282&_=1430217363882' because its MIME
type ('application/atom+xml') is not executable, and strict MIME type checking is enabled.
<script>
$(document).ready(function () {
$("#KMPDiscussions").click(function () {
//$.support.cors = true;
$.ajax({
url: "http://<server>/_api//web/lists",
dataType: "jsonp",
type: "GET",
method: "GET",
contentType: "application/javascript",
headers: {
"content-type":
"application/json;odata=verbose",
"accept": "application/json;odata=verbose",
success: function onSuccess(data) {
alert("Inside Alert");
error: function onError(data){
alert("Error: "
+ data);
</script>
It always hits the error on callback.
Is there any other way that I can invoke SharePoint Rest Api from a Cross Domain. Please Help.

Hi Chris,
Thanks for the reply,Here iam using different files to be uploaded in library.
please find the below snapshot of json response and ULS logs.
12/22/2013 18:31:15.02 w3wp.exe (0x3338) 0x401C SharePoint Foundation Files
abq2i High Could not get DocumentContent row: 0x80004005. 79f7629c-4694-c026-
3349-2049178ee919
12/22/2013 18:31:15.02 w3wp.exe (0x3338) 0x401C SharePoint Foundation Files
aiv4w Medium Spent 0 ms to bind -1 byte file stream 79f7629c-4694-c026-3349-
2049178ee919
12/22/2013 18:31:15.02 w3wp.exe (0x3338) 0x401C SharePoint Foundation Files
aise3 Medium Failure when fetching document. 0x80070012 79f7629c-4694-c026-
3349-2049178ee919
12/22/2013 18:31:15.39 w3wp.exe (0x3338) 0x0D4C SharePoint Foundation
Database ab1a9 High Failed to get document content data.
System.ComponentModel.Win32Exception (0x80004005): Cannot complete this function at
Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object
ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)
79f7629c-76ab-c026-3349-2c9132b13e9a
12/22/2013 18:31:15.39 w3wp.exe (0x3338) 0x4184 SharePoint Foundation
Database ab1a9 High Failed to get document content data.
System.ComponentModel.Win32Exception (0x80004005): Cannot complete this function at
Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object
ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)
79f7629c-76ab-c026-3349-281167b6cd09
Thanks again,
Naresh.

How to set Mime Type for Static Files

Hi All,
I am working on Apex 3.2.1.00.10.
When I am trying to upload (create) a ".js" file into Static Files under Shared Components of an application; it is saving as "*text/plain*" for Mime Type. But I need Mime type to be set as "*application/x-javascript*".
Please help me to change the Mime type of .js file.
Or is there any way to upload the file directly as "*application/x-javascript*" as its Mime Type.
Thanks in advance.
Umesh

In IIS v4 which comes with the Windows NT4 option pack, you right click the web page you are working with, select properties, then go to the HTTP Headers tab. At the bottom there's a button labelled File Types in the MIME Map section.
After you've clicked that, you can add the two mime types you need;
Associated Extension MIME Type
.jar application/x-java-jar-file
.jnlp application/x-java-jnlp-file
I'm assuming that it is the same in W2k/IIS5.

Prompting a "Save As" dialog for an accepted mime type

Hi ,
I am using the following code to prompt a "Save As" dialog bod for an xls file:
response.setHeader("Content-disposition","attachment; filename=test.xls");
This does work, it prompts the save as dialog box with the name "test.xls" if i click on save. However if i click on open, it displays an error saying the file could not be found.
Any idea how to specify a custom file name for an accepted mime type?
Thanks in advance

Ok let me try & be more clear.
I have a JSP page. In this page there is an "Create Excel" link. When this link is clicked, the JSP dynamically creates the data. Then the following code:
response.setContentType("application/vnd.ms-excel");
response.setHeader("Content-disposition","attachment; filename=test.xls");
This causes the file save dialog box to be created. This dialog box has "open" & "save" options.
When the save option is clicked, the user is prompted to save a file named test.xls. However if the user clicks on the "Open" dialog box, then the file is not opened,i get an error message saying the file does not exist.
If i dont specify the
response.setHeader("Content-disposition","attachment; filename=test.xls");
Then the file save dialog box displays a default filename which is the same as name of my servlet. This works for both Open as well as save options.
I hope i have not confused you further..:)
Please help!

How to use JavaSript library stored in mime type repository???

Hi Experts
I currently have the situation that I would like to deploy several JavaScript functions in a multitude of templates. I need my own JavaScript functions as the provided functionality is not sufficient.
I have figured that I can add my function by using the script item and that works fine, but it requires the script to be entered in every template.
My idea is to store the central JS file in the mime type repository and then reference it, however it doesn't seem to work.
Does anybody have an idea on how to make it work or alternatively have a central JavaScript library that is used by several different templates?
Thanks for your help, regards,
Minima

Thanks for the answer, DEEPU's comment realer helped.
Another solution is to create a Web Item that contains the coding. The Web Item can then be stored as reusable. This also looks like a neat solution for the problem.
Hope it will help some people.
Regards,
Minima

Mime-type

Similar Messages

Maybe you are looking for