Mimo Monitor via USB and additional monitor via mini-display?
Hi,
I currently have a 2009 MBP, with a second monitor I attach via the mini-display port. I'm thinking of adding a USB monitor like this one - http://www.mimomonitors.com/products/imo-pivot-touch
Will the MBP/OS X support this additional screen?
I think this question might best be addressed to the makers of the monitor. I imagine they must have tested it with MBPs, and perhaps also with additional monitors.
Just out of curiosity, what do you plan to use the tiny monitor for? Its screen is even smaller than the 1984 128K Mac's, though its resolution is slightly higher.
Similar Messages
-
I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".
Right click on your device icon on the left pane of iTunes and click on transfer pur....
-
after setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What's going on?
Regarding the USB, see if zapping the PRAM helps.
Regarding your storage space check out the following:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
===============
Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk -
Connecting USB and another computer via wireless
Can I connect the printer to one computer via USB and another via wireless?
This question was solved.
View Solution.photonics wrote:
Can I connect the printer to one computer via USB and another via wireless?
Hi,
Yes, but when sending 2 print jobs from 2 computers at the same time, the wreless job will fail. In many case it will recover itself but sometimes it can't.
Regars.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error. Any ideas?
Hi Pebbles2313,
It sounds like you have an issue with your printer software. You may find some of the software necessary to run your printer through the following link:
OS X: Printer and scanner software available for download - Apple Support
http://support.apple.com/en-is/HT201465
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.
Try downloading the driver directly from Canon's web site.
-
My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?
Shootist007 wrote:
If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad. Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS. Just maybe right genius? Don't rush to criticize someone's recommendations until you realize other possibilities. (I did say "if it does")
Thank you -
My HP Deskjet 1055 was connected to my laptop via USB and wiould not print immediately.
My HP Deskjet 1055 was connected to my laptop via USB and wiould not print immediately. However, when the computer was restarted, the printing job started. Please help me with a solution.
The problem is with your computer's USB port as it is powering down to save power. You need to turn this off. Go here. http://www.ehow.com/how_6818080_turn-port_s-power-save-option.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?
Unless your HP printer is an AirPrint-ready device, just connecting it to the USB port of the AirPort Express base station will not make it so.
On the other hand, connecting a non-AirPrint printer to the base station's USB port it can be shared out by the base station's print server. Please see the following Apple Support article for details. -
IPhone storage via USB and WiFi
Hi,
I'm looking for an APP which allows to use iPhone as USB Key (storage), and to transfer files via USB and WiFi connections.
I've found some, but I would like one which offers both transfer mode: USB and WiFi.
Could you tell me the best APP that you know?
Thanks,
Chrisneuroanatomist wrote:
There is no app for USB storage, because the SDK does not allow developers to write apps to access the dock connector for data transfer. Plenty of apps for Wi-Fi storage in the App Store.
Could be... in the past "FileApp" (previously FileAid) supported USB data transfer, but now they say "Removed USB connection support - as per Apple request FileAid no longer offers the ability to access files via USB"!
http://itunes.apple.com/fr/app/fileapp-previously-fileaid-document/id297804694?m t=8
Why did Apple disable this offer?
Sometimes Apple plays very closed environment... too much commercial, not enough friendly
I've found another App which supports USB transfer, "Flash Drive" from "Readdle":
http://itunes.apple.com/fr/app/flash-drive-view-save-with-drag/id300366636?mt=8
Do you know this App?
USB is faster than WiFi.. and with 32GB storage, USB technology should be the minimal level of data tranfer! -
I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?
Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.
-
I have a Samsung HD TV and I purchased a Mini Display port to HDMI Adapter today. For some strange reason I get no display on my HD tv. I even tried switching a few HDMI cables and nothing popped up. I made sure my computer performed all software updates, and I even tried calling Apple Support. They just told me to keep trying different hdmi cables and see if anything pops up. Does anybody know what the problem is? My HDMI cable is from "rocketfish" also my display port is too.
You may have the screen refresh rate set higher than the TV is generally able to track reliably. It may be able to get there most times, but occasionally loses sync because it is out of its nominal range.
I suggest you sit down with the manual for the TV and find out what resolutions at what refresh rates it intends to support through VGA, and make sure your screen settings are near (or below) those limits. -
Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?
Look up "screen sharing" in help
You can control your mini (which I am assuming you are hooking to your TV) complete from your iMac.
After you set up screen sharing, you can go to the finder, under the "go" menu choose "Connect to server" and then browse. Choose your mac mini's name, and look for the "Screen Sharing" button.
Choose Apple menu > System Preferences, and then click Sharing.
Select the Screen Sharing checkbox.
To specify who can share your screen, select one of the following:
All users:
Select this if you want to allow any user with a user account on your computer to share your screen.
Only these users:
Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Users & Groups preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list, and then click Select.
Click Computer Settings and set the following options:
Anyone may request permission to control screen:
Select this to allow anyone on your network to request to share your screen.
VNC viewers may control screen with password:
Select this and enter a password that VNC viewer applications can enter in order to control your screen.It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X. -
Can I have 2 displays hooked up to my macbook pro via usb and display port
I have a Macbok Pro (15 inch 2011) can I hook a monitor via USB (mirrored) and hook a second one via displayport to dvi as extendd, its because i want 2 bigger monitors on my desk, thank you all info appreciated
Hello OnlyoneLeaddog,
The following article contains pertinent information and useful tips that can help get your TV working with your Mac again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen -
Install windows 7 via usb and bootcamp
Okay guys, its been 5 days now going thru this MESS!
-I own a MacBookPro Early 2011 (MacBookPro8,1)
after now 3 years my superdrive is broken...not able to read CDs any more.
I try to get Windows 7 on this piece of computer, but Bootcamp only offered my to install via CD
-After days of searching I did the following:
.I edited info.plist of bootcamp to enable the bootcamp option of a usb stick installation.
.I created a WININSTALL usb stick with bootcamp. Bootcamp restarts and show:
no bootable device found. pls insert cd and press any key
after an other da of searching i found out to use gparted to format the usb into a fat32 format and then copied to this usb the files of WINISTALL usb stick
then i rebooted --- no device found---rebooted again pressing alt -----i was able to select the wininstall usb---and it opens gparted setup window -.-
seriously guys, what is this???? does it needs to be so complicated to just install windows 7 without a cd drive ( which is **** getting broken so fast!!)
Now I really have no clue how to continue, maybe sell this macbook and just buy a windows ? Definitly last time I owned an mac anywayscool to get any feedback too...
Maybe you are looking for
-
Performance problem with the bulk data
Hi, I have created the mapping to load the fact table and succesfully deployed. When i tried to do the Initial load with the 12 million records,it is taking arround 90 hours. To reduce this time ,what performance measures we can take. Following is th
-
Configuring multiple forms environments
I originally posted this over in app server, but saw a similar post with a response suggesting that forms issues are best addressed over in this forum ... so here it is: 9i AS Rel 2. We need to have two independent 'environments' running on one serve
-
When you click on photos in Facebook albums- they are black. I can reload a page and they appear. Same for Member -photos on my Meetup hiking page. Also- Weebly website service: some of the photos in my portfolio are black. You can click on them and
-
My Library on my Itunes has music from past ipods. I want it to just have music that i currently have on my Ipod touch. How do I do that?
-
Problem submitting Journal Batches for approval in General Ledger
Hi! I'm preparing a Journal batch for approval. Now after preparing, i am supposed to click on the Approve Batch button but it is disabled/greyed out. So we can't run the approval process(workflow). What might be the problem? Has anyone had a similar