Min.Internet bandwidth for SAP clients with Windows Terminal Services (RDP)

Dear all,
what is a minimum/recommended Internet bandwidth for client who are using SAP client with RDP (SAP client is connecting directly via RDP session to remote SAP server).
regards
GN
Edited by: Grzegorz Niecka on Aug 4, 2011 10:36 AM

Hi GN.......
It is recommended to have 1 Mbps speed of Internet in order to connect SAP Client from its destination to server if you are using Terminal server or VPN.......
If you still not getting proper connectivity you may increase it to 2 Mbps........
Regards,
Rahul

Similar Messages

SAP clients on a terminal services

How do you setup SAP clients on a terminal services? I want to deploy SAP 2007A (5 licenses) on a windows 2008 server running terminal services.

Your question is not very clear. If I understand you correctly, you just need to install B1 client on the Terminal Server to connect to B1 database.
Thanks,
Gordon

I need an Internet driver for Yoga 13 with Windows 7 operating system

I downgrade my yoga 13 operating system from Windows 8 to Windows 7 because it has a confliction with my software that I need to use. After that, I cannot connect it to Internet. Does anyone know the driver that I can use for this circumstance please? I also have some unknow devices listed on the Device Manager such as SM Bus Controller, PCI Data Acquisition and Signal Proceussing Controller, USB Controller, etc.

Hello,
From looking at the Yoga 13 Hardware Maintenance Manual and downloading the driver package from the Realtek Wireless LAN & Bluetooth Driver for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13 page and extracting (but not running) it to look at the contents, it appears the Yoga 13 uses a wireless LAN card based on Realtek RTL8732 chipset.
I would suggest that you try downloading the drivers, expanding, but not installing them on to a USB flash drive or SD card, then plugging that into the Yoga 13, running the Device Manager (filename: DEVMGMT.MSC), clicking on the appropriate entry for the wireless network adapter, selecting update, and then choosing the Browse my computer for driver software option, pointing that to the location of the unpacked drivers. Perhaps Device Manager will find the correct drivers to install that way.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Windows Terminal Services and Swing

My large swing application is being accessed remotely using Windows Terminal Services RDP protocol and is performing dreadfully in terms of screen updates. Is there an answer for this problem? Any suggestions?
Regards
David

In my opinion the real problem is not at all in your application.
1) Window terminal services (RDP)
Each time that the screen changes is send to client all the screen.
This is also for mouse moving.
Using more efficent software, like Citrix that is based on RDP, are
send to client only the dirrefernces, and mouse moving is managed
only by client side.
This gives advantages in performances.
Window terminal Server, also, needed a strong Server to run, in my
experiences more than 10 connections my cause a performances
problems in many cases.
2) The network
Is needed an efficient network for ship quicly all data traffic generated
for that fat application, minimum 100 Mbit.
If the network is just congestionated for others think (internet browsing,
an lot of file exchange and so on) the performances of terminal server
is bad. (terminal server ships a lot of information across the network)
3) Your application.
Control if too many repaint() or revalidate() are called.
For do that simply u can override that methods in this way in your costom components:
public void repaint()
super.repaint();
System.out.println("Repainting of MyComponent");
the same think for revlidate.
Now, lanching your application, u can control how many times for transaction those methods are invoked.
My doubt is that, every time that a repaint or a revalidate occurs,
Terminal Server reshape all the screen for client (not so sure about
that)
I say u that because I have had a similar problem (flickering).
I have see that flickering was caused by serval repaint invocation
by swing itself.
I had solved it simply do that
public void repaint()
if (!wBatchMode)
super.repaint();
The variable wBatchMode is setted to true (for example in my custom
JTable) util I append columns and rows.
If u look for swing code for each column added, the repaint methid is
invoked.
When i have finished to populate my component i set the wBatchMode
variable to false, so the repaint method occurs only one time and no
flickering occurs.
So, if is true that Terminal Server for every revalidate/repaint reship
the screen, this method may be help u.
Regards

WEBVPN and Windows Terminal Services

Does anyone have a copy of a config to set up WEBVPN with Windows Terminal Services? I have opened port 3389, but something does not seem to be working correctly.

Hi Paul,
you don´t say exactly what is not working but anyhow here is example config:
Under Configuration | Tunneling and Security | WebVPN | Port Forwarding you put the following into the fields:
Name: Terminal Server
Local TCP Port: 2000
Remote Server: 10.172.24.100
Remote TCP Port: 3389
Now after the user has logged into the WebVPN and click-ed on Application Access he will see a window. In the window there are 6 columns. In the Local column you will see something like 127.0.0.1:2000 and in the Remote column 10.172.24.100:3389. The user will type 127.0.0.1:2000 in the computer field in the Remote Desktop Connection window
Hope this helps,
Vidir

BMC APPSIGHT for SAP client diagnostics - License

Hi,
I downloaded the BMC Appsight tool for SAP client diagnostics and also blackbox. As i understood there is no license required to use this client tool. If i launch the appsight system and gave URL of solution manager :
http://<host>:<port>/sap/bc/srt/rfc/sap/AGS_CHECK_LICENCE_SEP?sap-client=<Solution Manager client number> but it is giving connection failed ... is it something related to license ? or could be some other issue...
Thanks,
Murali.

Murali,
I'm having the same issues you had. I believe I've saved everything correctly in WSCONFIG, yet the BMC Client is still getting the error "Solution manager connection failed".
Did you find any documentation for this part of Solman_Setup for Solution Manager 7.1?
When I put the URL to the AGS_CHECK_LICENCE_SEP in a browser, I get a blank page, which leads me to believe that the service is being reached.
Any tips would be appreciated.
I've gone through all the BMC notes, and followed the documentation in solman_setup 20 times now, with no luck.

Deployment for 250 Clients with a poor communicationlink

Hello guys :
We're currently working with Forte 3.0.J.1.
We have two questions :
1.- We have a big application and when we deploy it the client
partition is quite large.
The size of the standard partition image repositories (*.btd,
*.btx) is 7436 Kb.
We then need to distribute the client files over a LAN (5% of the
users) and over a
WAN (96% of the users). Most of the users have a poor communication
link ( 9600 bps !!!! ).
We have two schemes for the distribution :
a).- Configuration of the client machine ( forte control panel with
flag :
cfg:em:2:2:2. In this case, the client partition must be
manually copied.
This takes 50 minutes to copy via ftp. This flag requires
the file being executed
using ftexec -fi parameter.
b).- Normal Forte mechanism, the client partition is being
copied automatically once
forte detects a difference with the current file. This
takes 56 minutes via
the Forte environment.
Is there somebody having the same scenario ( low speed
communications links ), if so
can you share your experience with us?. Apart from that, we are
having quite good
response time inside the application.
2.- What is the minimal configuration in memory (RAM) for a Central
Server Node ( only Forte
environment ). The machine is an Alpha 4100 with 1GB of RAM running
Alpha Unix 4.0.D, the database is
Sybase Adaptive Server 11.9.3 with 250 to 300 concurrent forté
users.
Regards
JAEB.
Do You Yahoo!?
Free instant messaging and more at http://messenger.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi,
We've similar situation here but a little bit better. What we did was:
1. We gzipped all the client btrees under appdist after deployment but
before download.
2. We wrote our own "Launcher" which would do one extra step - unzip
the client btree before launching the client with normal launchservice.
One drawback of this approach is that you will need
1. hard-coding on unzipping the btree ( like hard-code for behaviour
under Windows, Mac or UNIX )
2. carefully designed application name. Note that Forte save the files
in only 8 characters. Any name longer than that will be truncated with
sequence number for the 8th character.
One more thing that we've observed over WAN. When the traffic is really
high and when we have a deployment, the nodemgr will crash claiming that it
is out of memory. However, when we check the trace, the memory allocated by
-fm is far more than enough. Thus, I suspected that when the download is
slow, the nodemgr is flood with threads trying to download the applet to the
client. And it is the thread manager that got boomed when there is really a
lot of users. So beware.
Regards,
Peter Sham.
-----Original Message-----
From: Jorge Espinoza [SMTP:[email protected]]
Sent: Wednesday, May 12, 1999 1:18 PM
To: [email protected]
Subject: Deployment for 250 Clients with a poor communication
link
Hello guys :
We're currently working with Forte 3.0.J.1.
We have two questions :
1.- We have a big application and when we deploy it the client
partition is quite large.
The size of the standard partition image repositories (*.btd,
*.btx) is 7436 Kb.
We then need to distribute the client files over a LAN (5% of
the
users) and over a
WAN (96% of the users). Most of the users have a poor
communication
link ( 9600 bps !!!! ).
We have two schemes for the distribution :
a).- Configuration of the client machine ( forte control
panel with
flag :
cfg:em:2:2:2. In this case, the client partition must
be
manually copied.
This takes 50 minutes to copy via ftp. This flag
requires
the file being executed
using ftexec -fi parameter.
b).- Normal Forte mechanism, the client partition is being
copied automatically once
forte detects a difference with the current file. This
takes 56 minutes via
the Forte environment.
Is there somebody having the same scenario ( low speed
communications links ), if so
can you share your experience with us?. Apart from that, we are
having quite good
response time inside the application.
2.- What is the minimal configuration in memory (RAM) for a Central
Server Node ( only Forte
environment ). The machine is an Alpha 4100 with 1GB of RAM
running
Alpha Unix 4.0.D, the database is
Sybase Adaptive Server 11.9.3 with 250 to 300 concurrent forté
users.
Regards
JAEB.
Do You Yahoo!?
Free instant messaging and more at http://messenger.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

How to make SAP B1 connection with Windows Sharepoint Service 3.0

how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
public bool ConnectToCompany()
            oCompany = new SAPbobsCOM.Company();
            oCompany.Server = "192.168.1.58";
            oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
            oCompany.CompanyDB = "SBODemoUS";
            oCompany.DbUserName = "sa";
            oCompany.DbPassword = "abc";
            //oCompany.UseTrusted = true;
            oCompany.UserName = "manager";
            oCompany.Password = "manager";
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
            oCompany.LicenseServer = "192.168.1.58:30000";
            int i = oCompany.Connect();
            if (i != 0)
                return false;
            return true;
protected override void RenderContents(HtmlTextWriter writer)
            if (conn.ConnectToCompany() == true)
                writer.Write("Hello" + this.Context.User.Identity.Name);
Edited by: bikalg on Nov 28, 2010 9:43 AM

Hi.......
Welcome to SAP Business One Forum.....
Unfortunately this is the wrong forum you posted here.
I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
Regards,
Rahul

Unable to install itunes for new computer with windows 8

unable to install itunes for new computer with windows 8
states this app unable to run on this PC

Hello jgrn76,
It sounds like you are getting an error stating that the iTunes installer cannot be run on your computer. I would try downloading the 64 bit version of iTunes from here:
iTunes 11.1.3 for Windows (64-bit)
http://support.apple.com/kb/DL1615
If issues persist when trying to install it, I would try running through the steps in the article named:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Otherwise, would you mind elaborating a bit on what the error message says, word for word?
Thank you for using Apple Support Communities.
Regards,
Sterling

Is it possible to build a project with Labview 2010 on a Windows XP system, that is useful for a system with windows 7 on it?

Hi there,
I am planning to use Labview 2010 in a short time.
But before I'm going to use it I have some questions.
I know it is possible to run Labview 2010 in an XP environment. But is it also possible to, when running Labview 2010 on a XP system, to build a project to a version that is useful in a Windows 7 environment?
Or do I have to run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?
Please give me some information.
I hope to hear from one of you soon.
Regards,
Kenny
Solved!
Go to Solution.

Is it possible to build a project with Labview 2009 on a Windows XP system, that is useful for a system with windows 7 on it?
Thanks.
Philippe B.
Certified Associate Developer / Dépt Moyens d'essais
www.ingenia-system.com

The itunes library file can not be saved. you do not have enough access privileges for this operation with windows xp

How do i solve the following error message that come with uploading to itunes Match: The itunes library file can not be saved. you do not have enough access privileges for this operation with windows xp

Bump.

I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online. Is there a way to do this?

I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online. Is there a way to do this?

Hi John,
Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
Linda

What is the required internet bandwidth for Endeca Web Acquisition Tool

Hi,
What is the required internet bandwidth for Endeca Web Acquisition Tool.
Regards,
Suresh.

I would expect the tool to work within the constraints of the bandwidth available. Low bandwidth = slow acquisition.

Integration documentation for sap sd with fico and mm

hi Sappers,
I need Documentation for SAP SD with FICO and MM Module
its very urgent.
mail id : [email protected]

Some basic information :
FI-MM: The integration between FI-MM happens in T-code: OBYC
1. When PO is created :
No Entry -
2. When GR is posted
 Inventory Account dr (Transaction Key BSX in OBYC)
 To GRIR account (T.Key WRX in T-code OBYC)
3. When Invoice is posted
 GRIR account Dr.
 Vendor account Cr.
4. Payment made to Vendor
 Vendor A/c Dr
 To Bank Clearing A/c Cr.
Points to know : Movement Types, Assignment of Movement types to T-keys (T-code OMJJ), Value string (I also need some information on this) , OMWN and OMWB transactions.
There is a close integration b/w FI & MM, actually document flows from MM to FI in the following areas such as,
 1. Movement Types:
Used to enable the system to find the predefined posting rules determining how the accounts of financial accounting system are to be posted & to update the stock fields in the matrl master data.(Goods Receipt, Goods Issue, etc)
 2. Valuation Class:
Assignment of material to grp of gl account, used to determine the gl accounts that are updated as a result of goods movement.
3. Transaction/Event key:
Used to control the storage or filing of documents & assignment of documents.Used to differeniate b/w various transactions such as goods movement tht occur in inventory.
 4. Material Type:
Each material should assign mtrl type in mtrl master record used to update whether changes made in qty are updated in material master record & change in value also updated in stock account.
 FI-SD Integration:
The integration is done in T-code VKOA
 1. Sales Order Created
 -No Entry-
2. PGI done (Goods issue)
 Cost of Goods Sold Dr (Configured in OBYC GBB T-Key)
 To Inventory Account
 3. Billing document released to Accounting
 Customer Account Dr.
 To Sales Revenue Account (ERL T-key in Pricing procedure)
Note : The GL account is assigned to this ERL in VKOA
 4. Payment Received
 Bank Clearing A/c Dr
 Customer A/c Cr.
Points to Know : Good to understand the pricing procedure and how the different transaction keys are used like ERL, ERS etc

Use only Internet Explorer for SAP portal

Hello,
We have a requirement to use only internet explorer for SAP portal.
When we try to use portal in any other browser, it should display a message saying "This browser is not supported for the application" (or any other message). But purpose is, the portal application should be usable in only one browser i.e Internet Explorer.
If any one have any idea on this, how this can be implemented, then please share the same. I tried to find if there are any standard SAP portal parameters, but haven't come across any.
Regards,
Denish

Hi Denish:
Following link may not apply to your scenario but could give you some direction and ideas:
Changing the Default Browser Detection - Developing Web Dynpro ABAP Applications - SAP Library
Further more, specifics of your system set up may help us in understanding your situation better and perhaps we can offer more help.
Sincerely,
Amrit

Min.Internet bandwidth for SAP clients with Windows Terminal Services (RDP)

Similar Messages

Maybe you are looking for