Min Max check

Hello
DC521 activity check the mix and max limit of the DC parameteer already collected, if I already NOT checked the ‘Override Min/Max’ then this check will be done at before saving the DC record.
So DC521 works when I allow to override the min and max value while collecting data by checking that check box and do the check later in the process through DC521, please suggest ?
Another question same area
In DC parameter details screen -
Difference between ‘Override Min/Max’ and ‘Soft Limit Check on Min/Max Value’?
Thanks

Hi!
Technically there is no difference between Override Min/Max and Soft Limit Check now. Originally the latter was meant for QM groups received from ERP, but eventually this restriction was not implemented. Override Min/Max as ME original feature not related to ERP integration was meant for usage along with Certification check.
Regards,
Sergiy

Similar Messages

Can we use MRP to plan for FERT in-house produced with PIR's & has Min/Max

Hi SAP Guru's
I have a very critical issue from the client who wants to use MIN/ MAX stock values for planning its finished products (in-house produced)
here is the details of the scenario
Client recieves 2 Excel files every week from customer
1st file contains the Weekly Demand Forecast of FERT material for next 1 year and they upload it in MD61 as PIR's BUT this value is also Inclusive of Safety stock value (ex: if weekly demand entered in MD61 as PIR is 50 and if safety stock value is 10, then actual demand is only 40)
2nd file send contains only safety stock values (for ex in this case let it = 10) to be maintained for the FERT materials
the client wants MRP to plan and trigger based on this PIR's in MD61 and Safety stock level fand plan for FERT, HALB and also ROH materials as defined in the BOM also taking into consideration the current WIP levels (Work in progress for any existing production orders currently being processed) based on the production Lead times values maintained
so what the client wants is they want to maintain 2 stock values, that is one least stock value and other higher value which if stock falls below this point, will trigger production based on the lead time and considering any WIP levels also
(for ex in this case if PIR = 50 and safety stock is 10, MRP run result client wants is = 30 and NOT =40)
so here are my questions
1. is this scenario feasible? use safety stock and min/max level for in-house produced finished which has demand PIRs in MD61 at the same time?
2. Also due to SOX complaince regulations, the client does not want to change the forecast values in MD61, so is it possible to make some settings so that forecast is corrected by WIThOUT including the safety stock value in it? ( for ex: in this case as = 40 only and NOt as 50)
3. which all settings should i maintain like for MRP type or lot size or stock qty levels or anyother customizations if any required so that when we run MRP, can it ignore the safety stock value and generate the client desired output?
thank u verymuch for your time & expert advice in advance

Hi Chakri,
This is not possible as per standard functionality. MRP always creates proposals for the shortage quantity of the safety stock. We have used the user exit in the plant level MRP run to exclude both plant and safety stock in the net requirements calculation.
You have to write logic to convert the safety stock into plant stock in the user exit so there will be no additional procurement proposals...you can create custom indicatar in materail master or linked any existing indicator like MRP group to the user exits so the MRP will checks this and will not create proposals for the selected parts.
If you have any questions then please inform.
Regards
TAJUDDIN

Vendor details for a Min Max requisitions

Hi All
When Min Max trigger some requisition interface lines, we need to get the vendor details also be populated,
What set up it need to get these. Because when I run a Min-Max planning report, I am not getting the vendor details.
What we have is we will be having a single item be with a single vendor and vendor site
Please help.

In the General planning tab for Sourcing type is it mentioned as Supplier?
Is the use ASL flag in the Purchasing tab for the item enabled?
The supplier and site details are active?
The ASL for this item is still active ? (Check in the supplier line details in the ASL form)
My funtional guy says yes to all the above quries.
And also says All ASL have the sourcing rules assigned to the assignment set that is setup on the MRP: Default Sourcing Assignment Set profile, but this scenario is only for minmax
So this issues is only for MIN-MAX.Please let me know if any thing to be done in setup to automatically get the
vendor details into requistions lines of interface table based on items.
Edited by: 834095 on Mar 14, 2011 2:59 AM

How to calculate min/max scan rate of PCI-MIO-16XE-50

My board: PCI-MIO-16XE-50 , 20MHz timebase
The min/max scan rate is0.00596-20K scan/s and the channel rate is 1.53-20Kchannels/s
How do they calculate these data?

Hi May
Check out the knowledge base locate at http://digital.ni.com/public.nsf/websearch/EA4E306828AF05B586256B8F00661A8B?OpenDocument . I think it answers your question.
Serges Lemo
Applications Engineer
National Instruments

MRP creating cancel notices for min max purchased items

We use min max planning for many repetitive purchased items. These same items are also set to MPS/DRP Planned as well. This is only so we can use the Planned Order report to identify material shortages to flow schedules.
However, MRP exceptions is requesting we cancel our min max purchased items since there is no demand. Can MRP be modified to NOT include min max planning method in cancel requests?
If not, where can I find a tool to identify material shortages for flow schedules?

Many thanks for this.
I can see entirely why it's designed as such, but I just find it slightly frustrating that there's no way to break the link between the order and the shipment out to the depot. Just to clarify, we're not requiring the orders to change - they will still be made and will come in - but just that the orders themselves don't specifically need to be the stock that is used for the replenishment.
So -
1. Min Max identifies depot needs replenishing.
2. Central distribution does not have (enough) stock to replenish.
3. Order is made to replenish central distributions stock.
4. We ship whatever we've got, when we've got it, to depot to replenish.
It's the bit where Min-Max is trying to replensih a specific depot rather than our central distribution centre that's my problem.
I suspect that, as you say, that specific issue is not directly fixable without getting our IT contractors to do a customisation.
I'm going to look into your Supply Date Offset suggestion now, though I'm not sure how this affects the shipping after the orders are placed. The orders themselves are approved manually after we've checked our stock position (i.e. what's in with the recycling team), but we recycle & refurb probably 60% of our maint stock so there'll always be kit turning up after the order has been made because of the long lead times.
Thanks again.

Min/Max Internal Orders 1 Requisition

We are running Min/Max planning to replenish stock in an "Emergency Warehouse" organization. The requisition import kicks off internal orders to a replenishment organization. The planner in the replenishment organization would like one order for each Min/Max run. The requisition group-by default in Purchasing parameters is vendor yet we are still seeing one unique requisition for each item thus creating one unique internal sales order per item. Thoughts?

Stick wrote:
The requisition group-by default in Purchasing parameters is vendor yet we are still seeing one unique requisition for each item thus creating one unique internal sales order per item. Thoughts?In this case the requisitions will not be grouped by Vendor because the supply source is Inventoy which is creating internal requisitions and not purchasing requisition (source is Supplier/ Vendor).
It is important to know how you are importing requisitions and what value is specified for Group By parameter during import. The value you setup in Purchasing Options defaults in the Requisition Import request parameter screen, but this can be changed before submission. So it is possible in your case that requisitions are imported using a different group by than what is specified in Purchasing Options.
From the list of different group by options available (All, Buyer, Category, Item, Supplier) you can probably use 'Location' during requisition import.
Location: Group requisition lines for each delivery location on a separate requisition.
But this will not guarantee 100% success because:
- If you import requisitions with source as INV then those can include requisitions from different INV sources generated from Reorder, Kanban etc having same delivery location. In that case all those requisitions will be grouped under a single header having same location.
- there may be different users running requisition import manually and some may forget to change this group by parameter (defaulted from purchasing options) while importing Min-Max planned requisitions (again they cannot segregate Min-Max, they can just specify INV as source)
A better solution would be to use the oracle provided custom hook (po_reqimp_pkg.post_validate_user_extensions) for requisition import to populate the GROUP_CODE column in PO_REQUISITIONS_INTERFACE table. The logic inside the hook should identify the rows in the interface table generated from each run of Min-Max and populate a unique value for all those rows in the GROUP_CODE column. You need a small piece of code to be added inside the hook.
You can also use REQ_NUMBER_SEGMENT1 column in the interface table to populate an unique value for all rows you want to group together. But in this case the value you specify will become the requisition number if there are no conflicts with the requisition number rule. Both these column, when populated, have precedence over Group by parameter. 1st priority GROUP_CODE (if populated). If GROUP_CODE is not populated then it checks REQ_NUMBER_SEGMENT1. If this is also blank then it uses Group By parameter.
Thanks
Supro

Min-max report

Hi,
I have place a order for a item. Ordered quantity is 10. Order is closed. But when I run min-max report; i found that on-hand quantity is not change and also the demamd quantity 10 is not reflecting. It is showing some different number 8, i.e item demand quantity = 8. Please guide me Why it is so and how to overcome this issue?
Also let me know the base table for this records.
Thanks

Hi Srini,
Just look at "INV: Minmax Reorder Approval" profile option whether it helps you. You might have set this profile option to "Approved". Change the setting to "Incomplete" either at "Site" or "Responsibility (In which you run the min max planning report) " level.
This would help you to create the min max requisitions in "Incomplete" status and then ask the requestors (or your store incharges) to review and approve the Purchase Requisitions!
Regarding "Supply" consideration, I will check and let you know..
Jay

Min & Max level

Hi
My client insist on the maintenance Min & Max level at storage location, however i can not maitain in standard MM.
If i develop a separate application for maintaing Min & Max level what will be the effects on MIGO when i do Issue or Receipts.
In this senario i will have to develop an additional check on every Movement of Materials (Issue & Receipts).
Kindly help me out.
Regards
Muhammad Tahir

Hi Tahir ,
As said by you . the requirement cannot be fulfilled in MM.
You may try at BIN level provided WM is implemented in your Org.
As a storage location may consists of different materials with different stock units ( Min and Max levels will again differ ) , i doubt your req may not be fulfilled .
Regards
Ramesh Ch

Min-Max Planning: Unable to generate requisition

Hi,
Trying to generate Internal Requisition for a Buy item in Vision Instance.
Min Max report log shows the following error:
[10-FEB-15 15:55:21] INV_Minmax_PVT.re_po: 252331: p_organization_id: 207, p_approval: 3, p_src_type: 1, p_encum_flag: N, p_customer_id: 1021, p_employee_id: 32118, p_description: Min Max Buy Item Sourced Internally, p_src_org: , p_src_subinv: , p_subinv: , p_location_id: 207, p_po_org_id: 204, p_pur_revision: 2
[10-FEB-15 15:55:21] INV_Minmax_PVT.re_po: 252331: Null src type or invalid transact_flag, order_flag or purch_flag
[10-FEB-15 15:55:21] INV_Minmax_PVT.re_po: 252331: 1, User-Defined Exception
[10-FEB-15 15:55:21] INV_Minmax_PVT.get_reord_stat: 252331: do_restock returned message: Unable to generate requisition
[10-FEB-15 15:55:21] INV_Minmax_PVT.RUN_MIN_MAX_PLAN: 252331: Reord qty: 80, Reorder status: Unable to generate requisition, l_sortee: NEW.MISC
[10-FEB-15 15:55:21] INV_MMX_WRAPPER_PVT.EXEC_MIN_MAX($Revision: 120.6 $): 252331: INV_Minmax_PVT.run_min_max_plan returned success
Pls refer to screenshots for setups done.
Regards,
Abhishek

Hi,
One more thing you have to verify for IR-ISO at Item level.
Verify 'Internal Ordeded' attribute is checked in Order Management tab or not.
Please check out following link for more details .
http://raghuoaf.blogspot.in/2013/09/internal-requisition-setup-in-oracle.html
http://www.oracleappshub.com/oracle-purchasing/10-min-guide-for-internal-requisition-to-internal-sales-order-flow/

Min Max Planning not reading Flow Schedules as Demand

We use min max planning to order all recurring purchases and flow schedules for production planning.
Min max planning report does NOT see flow schedules as a source of demand. Is this correct or are we missing a setup somewhere?
If min max planning cannot read flow schedules, is there a standard report to identify component shortages where items are between min max level but not enough on hand to fulfill the open flow schedule?

Check the user and employee tht you have used to launch the conc prog...

Charts- how to include data points outside of min/max ranges?

I'm trying to have a chart that has a horizontal datetime axis showing a full day of info collected at irregular intervals and a linear vertical axis that acknowledges but cuts off datapoints that are above a certain number.
For the vertical axis I thought I could just apply min/max values to achieve this, but I've found that if I have a maximum value of 25, any datapoints with a value above that are simply removed from the chartseries.items dataset (was hoping I might get something like a plot point near the top with an arrow, or the line going off the top and coming back.. but it's simply removed from the dataset.)
For the horizontal I was wanting to show a line all the way across regardless of where the first and last datapoints fell.. how I hoped to achieve this was to retrieve the points immediately following and preciding the period but limit the min max date, so that it would theoretically show the lines going off the edge but not the actual points.
i've thought of a few things that might work...
is there some way to have the vertical axis parabolic so that it's mostly linear from 0-20 and then values above that take cover much less space? I don't have any idea how I'd go about setting that up..
I have also thought about placing a dummy point at the beginning and end of the datetimeaxis... ie..
time = chart.minimum and
value = (first value today - last value yesterday)/(time between first time today and last time yesterday)
.. and then would have to make those points specifically not interactive.. and i don't know how possible that is. Also if there's a way not quite so involved that would also be awesome.
Any feedback on how to approach this is greatly appreciated!
Or is there something built into flex already that I've missed?

In article <[email protected]>,
chutla wrote:
> Greetings!
>
> You can use any of the 3D display vi's to show your "main" 3d
> data, and then use color to represent your fourth dimension. This can
> be accessed via the property node. You will have to set thresholds
> for each color you use, which is quite simple using the comparison
> functions. As far as the data is concerned, the fourth dimension will
> be just another vector (column) in your data file.
chutla, thanks for your post, but I don't want a 3D display of the
data....
> Also, check out
> the BUFFER examples for how to separate out "running" data in real
> time.
Not clear to me what you mean, but will c
heck the BUFFER examples.
> As far as autoscaling is concerned, you might have to disable
> it, or alternatively, you could force a couple of "dummy" points into
> your data which represent the absolute min/max you should encounter.
> Autoscaling should generally be regarded as a default mode, just to
> get things rolling, it should not be relied on too heavily for serious
> data acquisition. It's better to use well-conditioned data, or some
> other means, such as a logarithmic scale, to allow access to all your
> possible data points.
I love autoscaling, that's the way it should be.
germ Remove "nospam" to reply

Min max planning report errors out

Min max planning is defined at Organization level with the source type as
supplier.
Min max report errors out for restock option "yes".
Following is the error message in the log file
MSG-00069: Calling INV_MMX_WRAPPER_PVT.exec_min_max from Before Report Trigger
MSG-00070: INV_MMX_WRAPPER_PVT.exec_min_max returned an error:
REP-1825: Before Report trigger returned FALSE.
Have checked all the possible causes
1)work day calender
2)Default delivery location
3)profile option.
Also applied a patch for this error
Patch number 4613194
Still the issue persists

Hi,
Please review the following notes:
Note: 453956.1 - INVISMMX.RDF - Mix-Max Planning Report Completes Successfully But Receive MSG-00069 in Request Log
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=453956.1
Note: 785813.1 - MSG-00069, MSG-00070 Errors Occurred While Running Min-Max Planning Report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=785813.1
Note: 275521.1 - Min Max Rep (INVISMMX) Returns Errors MSG-00069, MSG-00070, REP-1825
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=275521.1
Note: 280605.1 - 11i INVISMMX- Error Before Report Trigger Returned False Rep-1825
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=280605.1
Regards,
Hussein

How to calculate Min & Max temperature with just air temperature

Hi Gurus,
I have a requirement in which I have to build a Bex Query in which I have to find the Min & Max temperature of a day if a specific date range is used in the query.I have checked the multiprovider and there is only one field available
which is "Air temperature" and it's a KF. I have built a query which will give you the temperature for the day if you give a particular date range.
My question is,is it possible for me to find the min and max temperature with just air temperature as input?
Please let me know your thoughts.
Thanks,
Raj

Hi,
You have to create two KFs for Min and Max temperatures,
In Min Temp KF definition, Aggregation Tab-->Minimum--> reference char as 0calday
In Max Temp KF definition, Aggregation tab-->Maximum-->Reference char as 0calday
Regards,
Suman

WMS Min Max replenishment - Auto allocate and create wms task

We using Oracle WMS and want to implement Min Max planning for replenishing from bulk to pick. The Min max report creates the move order but its not allocated and we need to run the Move Order Pick Slip report to create the allocation and wms task. Is there no other way of doing this as we need to pass the move order number when running Move Order Pick Slip report and would like to automate the process.

Hi,
As you have mentioned :
Replenishment qty to 10
and the max bin qty is 40
min bin qty is 10
available stock is 40
System will still not generate any TR since your available qty is not less than min bin qty.
Reduce your available bin qty less than 10 then only it will generate TR.
Or keep min qty as 100 , Max qty as 1000 and replenishment qty as 100 and then check.
Please read the Program documentation for LP21 ( Blue icon on lp21 input screen) for calculation .
Minimum stock = 10
Maximum stock = 100
Replenishment qty = 40
Storage bin stock = 5
Since the storage bin stock has fallen below the minimum stock level defined in the material master, the system calculates a quantity to be supplied to this storage bin. The system attempts to increase the total quantity in the bin (5) by multiplying the replenishment quantity (40) as many times as possible to match the maximum quantity defined for the bin (100) without exceeding it. For the supply quantity, the system calculates 80 pieces (5 + 2 x 40 = 85 < 100).
Regards,
Shailesh

ESYU: Min-Max planning을 실행하면 자동으로 ReqImport program이 launch 되지 않는 원인

Purpose
Oracle Inventory Management - Version: 10.7 to 11.5.10
REPORT:INVISMMX - Min-max planning report
EXECUTABLE:POCIRM - Requisition Import
Buy items에 대해 Min-Max(with Restock=Y)을 실행하면, 이 program은 ReqImport를
자동으로 launch 시키지 못하고 단지 po_requisitions_interface_all table에 data를
insert 한다.
하지만 사용자는 Min-Max가 실행되면 이후 자동으로 ReqImport가 실행되길 원하고
있다. 이를 위한 workaround 방법을 소개한다.
Cause
ReqImport가 Min-Max 이후 자동으로 실행되는건지, Min-Max에 의해 자동으로 실행되는지
구분할 필요가 있다.
ReqImport는 Min-Max에 의해 실행되지 않는다.
Min-Max의 standard design은 단지 po_requisitions_interface_all table에 data를 넣어
주기만 할 뿐이지 ReqImport request를 자동으로 실행시키지는 않는다.
ReqImport는 Min-Max 진행 후 실행될 수 있다.
왜냐하면 ReqImport는 주기적으로 실행되게 scheudling 되어 있거나, ADS_PO_REQ_IMPORT_TRG1
와 같은 trigger에 의해 실행된다.
일부 vision demo instances에서 위 trigger를 볼 수 있는데 이 trigger에 의해 po_requisitions_interface_all
table에 data가 insert가 되면 ReqImport가 launch 된다.
Note: 이 Trigger는 standard product이 아니므로 귀사의 instance에서는 찾을 수 없을 것이다.
Solution
1. Short-to-medium term solution at your instance:
1-1) ReqImport가 주기적으로 실행될 수 있게 Schedule 해 놓는다.
-- or --
1-2) Min-Max report(Restock=Yes) 실행 후 manual 하게 ReqImport를 실행한다.
-- or --
1-3) Min-Max와 ReqImport programs을 포함하는 Report Set을 define 하고, Min-Max 대신
이 Report set 만을 실행한다.
-- or --
1-4) po_requistions_interface_all table에 triggers(similar to ADS_PO_REQ_IMPORT_TRG1)를
생성한다.
2. Medium-to-long term solution from Oracle
ER/Doc bug을 등록하고 metalink를 통해 진행과정을 check 한다.
2-1) Enhancement Request via ER/Bug 4310485 to have Min-Max Report to fire ReqImport automatically.
2-2) Documentation Bug 4310487 to have the INV User Guide corrected that Min-Max does NOT create Requisitions,
but ONLY populates the po_requisitions_interface_all table.
Reference
Note 305099.1

Min Max check

Similar Messages

Maybe you are looking for