Min power supply needed to make Aiport Express work ?

Hi all,
I plan to install an Aiport Express in my car to plug it to my car stereo in order to be able to use my Iphone 3GS music library.
First, I'm tired to use cables !
Furthermore, my car OS (vauxhall) is not anymore a "compatible device" (sic), even with the latest iOS ... but I've got a jack plug :-/
I plan to plug the Aiport Express to my car stereo throught this jack, and broadcast my music throught airplay. The Airport Express would be electrically powered throught the cigar lighter receptacle, or throught a 12v-220v converter (I'd rather prefer the first solution !).
So here is my question : what is the minimal power supply to make work the airport express ? According specs, 12Vdc 1.8A => ~22W ?
Does somebody can confirm 22W would be enought to make the Aiport Express work ?
Thanks a lot !

I'm referring Airport EXPRESS ... I forgot that plugs directly ...
The exterme offers other possibilities I don't need ... and is less affordable !
In a car, we only avec DC =>
So I must have a 12 Volt DC to 220 Volt 50Hz AC inverter, delivering at least 200mA(AC).
Something like this or rather this.
I should find it in a good electronic shop, and this kind of material should be rather small.
I'll also check if these devices provide AirPlay without a wi-fi network... or if somebody can here infirm or confirm ?
Thanks

Similar Messages

HOW LONG TIME YOU NEED TO MAKE GPS TO WORK WITH OV...

Question to NOKIA:
HOW LONG TIME YOU NEED TO MAKE GPS TO WORK WITH OVI MAP 3.1 in N97?
On all N97 I know and as you can read here in forum the GPS doesn't work usable in N97 and with MAP 3.1.
I believe that this is a software problem because often I get a GPS signal inhouse and in the wood, but from one second to the other N97 lost the GPS signal. And this in the best weather condition under free sky. Sometimes gps signal works for 15 minutes, then the signal will drop every minute or so.
The current position on map is shift (past) abaout 40-50 meters from the real position, so its unable to use.
The calculated speed is always changing between 0 and the current speed.
I have updated phone to de newes software and firmware also to ne newest maps also has hard reseted and reformatet and the problem ist still the same. If I switch off the option "Maps improvment" (which SENDS DATA TO NOKIA!!!) the the drop outs are fewer. But evreytime the position on maps is shift about 40-50 Meters from right position. Is there a mistake in calculation the position? Also the speed is jumping sometimes from 0 to x and back.
CAN NOKIA TELL US WHEN THIS BUG WILL BE FIXED, AND CAN NOKIA OFFER US A REFUND.
I have payed a lot for N97 and alot for the navigation licence and a lot for accesoires and a lot for the traffic security assistance. So I want a working phone! I dint have payed money for e alpha-stadium phone.
If this is realy the quality of nokia phone, then It is the latest phone I have buyed from nokia.
By the way, the phone has many many many many other bugs as described in this forum.
Really bad work NOKIA! :-(
I was so excited with my N95 and now this mess...
NOKIA please answer us forum members, what you plan to do with the N97 bugs. When we can hope that the bugs are gone? Otherwise I will return my phone and want my money back and I sue for compensation.

I have no word to disagree with you and hoping that Nokia soon will make some press statement or something else to tell us what they do with their flagship, sorry bugship Nokia N97.
Could be a shame recognize errors, but it's worst not to say nothing ant let the bad news of Nokia N97 spread for internet even if they want to sell a Nokia N97 Mini in the near future.
I understand and supose that we will no have no new version till september because we are in the last week and july and the activity in august decrease really high... but at least someone of Nokia could tell something about this problems and if it's possible all the other problems.
Why Nokia Beta Labs Forum there is a direct contact with Nokia workers, and in discussions is relly rare to find?
Yesterday is history.
Tomorrow is a mistery.
Today is a gift.

MEGA PC 651 Power Supply Needed

Hi wonder if anyone can help. My power supplys fan has died so the system is getting quite warm shall we say (about 52oC normal).
I need to replace this asap and reading this forum there are problems at to extra conections for the HIFI in off mode.
I actually dont use the radio or DVD player in off mode so i am not bothered about these conections.
Anyone know of a UK available power supply that i can replace this defective one with.??

Sorry didnt make it clear. The fan does work if i connect it to a 12v supply, but the internal board in the Power Supply isnt powering the fan.
Got round this by, detaching the fan from the power supply, and splicing it nto a motherboard power connector. Now when i turn it on the power supply re supplies the internal fan from outside supply.

Replacing my dv6-1260se power supply, need help.

I am in need of a new power supply for my laptop and was wondering which one would be the best. i believe my options are the 90w smart ac power adapter and the slim power adapter. any suggestions?

So what's the issue you're having?
I have never heard that rumor, a volt is a volt, an watt is a watt.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Thinkcentre M70z power supply needed in india maharashtra please help me out or support me

Hello there if any one could help me out of this i will be so thankful to him or her anyway.
i have lenovo thinkcentre m70z All-In-One desktop and its power supply burnt yesterday.
i need one fresh brand new SMPS / Power suppy for it.
from where i got that???
Thanking you
Contact +919421472324

ok, i've calmed down now and i think everythings sorted. all my files are still there and all applications, the ?'s just needed clicking on in the dock. i found it strange and wondered why my background changed. it's not a big deal, i just changed it straight back, but it made me think if that changed to default what other settings have changed to default? i've only had my mac a week or so, so i can't remember changing anything drastic, so this shouldn't really be a problem.
thanks alot for all the help, i'll know where to come next time i have any trouble. i love knowing that mac's have a good community of people willing to help each other out.

Power supply needed

I need the part number and/or specs. for a power supply to fit Creative Lab speakers SBS5. They are a 2 speaker system w/out subwoofer. Anybody have any idea?

Roger
Ihave a Tagan 580w U22 with switchable dual/combined +12v rails and it is very stable,set it combined for 35a.
Only thing to ponder was the 4/8 pin +12v/p4 connector,power supply has the correct split 2x4pin connectors so does the board but there is a little removable cover over 4 pins,so thinking MSI fitted it there for a reason I have fitted only one 4 pin connector,no problems as yet.
Think you may well have a point re the 18a.
I have just given my son my old sli platinum/cpu/heatsink/ram/vga card,this setup ran 250/11/4 @ 1.4v & ram 2.5 3 3 7 1.1 @ 2.75v with the Tagan.this setup now fitted in his case but with a dual 18a rail Enermax and he can't o/c stable to the old settings.Case has better cooling than the wavemaster it all came from.
Dont think the enermax is bad just that it supplies the power a different way.
Regards
Rossoevo

Mini power supply works with Video iPod?

Will the power supply that came with my iPod Mini work with the new 80GB Video iPod, which didn't come with a power supply? The adapters are the same but I don't want to fry the video iPod.
Thanks,
Brett

Yes, it will work just fine.

Power supply needed for MS-7220 (Diamond Plus) and others.

The following statement is taken form the K8B Diamond Plus Manual.
For ATX 12V power connection, it should be greater than 18A.
If I am interpreting correctly, the ATX 12V connector should have dedicated to it a minimum of 18A.
My first, question is if the Power Supply has two or more rails, how do you know the power dedicated to the ATX 12 connector on the Power Supply?
Second, if a +12V rail is not dedicated the connector, how do you know what is connected to each rail of the Power Supply?
This maybe the source of why many are saying, they have more stable system performance when using single rail Power Supplies.
I have tried eleven different manufactures to get more detailed Power Supply specifications, but no responses; today through February 1st is the Chinese New Year.
Those of you running the K8B Diamond Plus, what are you using for Power Supplies and are you having any instability problem?
One thing I did find curious was that going the manuals and in most all of the newer Socket 939 motherboards have this specification, but nothing in the motherboards specifications of on the MSI Web Site about this required and the are a lot of 500-600 Watt power supplies sold that do not meet this specification.
The statement Total Wattage does not mean a thing has even more meaning to me now.
Are we going to have to know the Current Rating of each cable on the output of a Power Supply now to insure we are purchasing the correct Power Supply?
Roger

Roger
Ihave a Tagan 580w U22 with switchable dual/combined +12v rails and it is very stable,set it combined for 35a.
Only thing to ponder was the 4/8 pin +12v/p4 connector,power supply has the correct split 2x4pin connectors so does the board but there is a little removable cover over 4 pins,so thinking MSI fitted it there for a reason I have fitted only one 4 pin connector,no problems as yet.
Think you may well have a point re the 18a.
I have just given my son my old sli platinum/cpu/heatsink/ram/vga card,this setup ran 250/11/4 @ 1.4v & ram 2.5 3 3 7 1.1 @ 2.75v with the Tagan.this setup now fitted in his case but with a dual 18a rail Enermax and he can't o/c stable to the old settings.Case has better cooling than the wavemaster it all came from.
Dont think the enermax is bad just that it supplies the power a different way.
Regards
Rossoevo

Nightblade B85c power supply need help

i have a nightblade b85c and the power supply is only 350w and i would like to change it but i carnt seem to get the old power supply out any help please?

Please open all cover(up/left/right) and then remove everything(motherboard/HDD/ODD...).
Then you can be replaced power supply.

OSA:Help needed to make a BAdi work

Hi All..
I need a help regarding the BAdi..i am using the Average BAdi in a column...I have a criterion group called critical attributes and under this there are 5 criterions..i need to insert the BAdi in the Criterion group Critical Attributes and the BAdi needs to calculate the values of the criterions and show the result in the criterion group...
I had done the same thing for the other criterion group and the BAdi was working fine..but the BAdi is not working when i insert it in Critical Attributes criterion group....I contacted some people and they told that it is a configuration issue..so please help me out with a solution...and also the configuration which i need to do to make the BAdi work....

Hi Maurice..
I am using the BAdi in an enabled column..i have already used the average Badi in a different criterion group called Performance Rating..It is working fine there...there is no difference between the 2 criterion groups...but somehow it is not working here...i really dont know what is the configuration issue since i am a technical guy...
I will tell u the issue using an example...
I have a criterion group Critical Attributes in which i have inserted the BAdi in the score column......
Under this i have 5 attributes like Accountability,Communication...etc..
The manager appraises the above attributes in the FAPP column...The Badi has to calculate the average of the 5 columns...
I have used the same average BAdi in another criterion group and it is working fine..
so please help me out with the answer..we r using ECC 5.0 version...

Will aiport express work with osx v 10.6.6

Will airport express work with an old netcomm NB6 router modem using osx v 10.6? Or do I need to buy a better modem first?

My airport express is quite old. Model A1088.
This model was discontinued about 7-8 years ago, so the product is at least that old, probably older than that. On average, the Express will last about 5 years.
I can't seem to get my airport utility to find this. Airport utility is the latest version.
Not sure what you mean by latest version of AirPort Utility. That would be a 6.x version, which does not support the older model of the Express that you have.
Or, did you mean to say that you have the latest version of AirPort Utility 5.6.1.....which would be the correct version for the Mac running (10.6.6)?
Please clarify.

Ac adaptor power supply needed

I need heeeelp
I have 5.1 PCWorks LX520 speaker , & it's ac adaptor doesn't work
& I searched for alternatives for it put I didn't find any ,
Its details :
2 V , 200 Am ,,, 230 V
it's the same as inspire models [2.1 & 4.1 ]
I live in egypt , how can I get it ?

i also had the same problem?and then after a bit of research i found that AC is not neccessary ! even if you provide it with dc voltage or some other transformer of 2 volt then also it will work.
i have tested mine with my car battery aswell as the charger of remote control car (toy).
remember positive and negative does not matter bcz the bridge rectifier installed in your speakers can easily pass dc current?of any direction.

I need to make outlook express repair. How to realize it?

I have recently lost my general outlook express folders. I try to open them but oe says they are corrupted.

Outlook Express Repair Toolbox is a Microsoft Outlook Express DBX repair tool that restores data from *.DBX Microsoft Outlook Express files.
Main capabilities of the Microsoft Outlook Express inbox repair tool include:
> Restore information from *. DBX files for Outlook Express 5, 5.5, 6
> Batch restoration mode for *.dbx files
> Compatible with Windows 98, NT 4.0, 2000, Me, XP, Vista and Windows 7
Source: http://www.outlookexpress.repairtoolbox.com/

Does Aiport Express work with internal modem and dial up ?

Does Airport Express allow for internet connection if you only have a dial-up account with an internal modem (iBook G4)?
When configuring the Airport Base Station in the Utilitiles/admin section - the only options available are for Ethernet/PPP - the modem options are grey and not selectable.

Hi,
An AirPort Express is not capable of using its USB port for the connection of a mobile broadband modem.
One possibility would be to combine an AirPort Express with a special adapter (such as this product) with Ethernet output.
Another possible solution would be to use a mobile broadband router (perhaps something similar to this or this) with built-in Wi-Fi, instead of the above combination.
Make sure that the USB mobile broadband modem in question is supported in both cases.
Jan

What code do i need to make my animation works in IE or other browsers other than Firefox?

Hi,
I am working on a website with animation. It shows on Firefox but not IE. Can anyone please advise what code I need to add? Or something else I need to do?
Thanks,
mykw123

Hi Nancy,
Thanks for your response to my question.
My website is not finished, still working on it in Dreamweaver. The animation is just slide in and was done in Adobe Edge Animate. The version of my IE is IE 11 in Windows 7. I use creative cloud version on all Adobe software.
Thanks a lot,
mykw123

Min power supply needed to make Aiport Express work ?

Similar Messages

Maybe you are looking for