Min. row height table style

A new table in Indesign is by default set with a minimum row height of 1.058 mm. This 'minimum' feature is also visible in a table style (the 'exact' feature is not for some reason). When I import a table from Word for example, it's row height might be different. For example a certain row had a height of 25 mm. So I applied the cell style to it where I set the 'min' rowheight to 1.058 mm. However, the row height still remains 25 mm. This doesn't only happen to imported tables. I've inserted a new table in indesign. This had a row height of 1.058 by default. Then I dragged a row heigher to 40 mm for example. Then I applied the cell style again with 'min' set to 1.058. The row height should turn to 1.058 but it remains 40 mm. Why can't I apply a rowheight in a cell style? Now I have to convert a table to text and then back to table again to get the default rowheight back.

If you want to force it to be a certain height, you should change "At Least" to "Exactly." "At Least" does just what it says it does—it sets a minimum for the row height, but lets the max vary. It should like you want to rows to be "exactly" a certain height, even if it causes text to become overset.
You should also be able to change your defaults when you have no documents open if you prefer it to work differently.

Similar Messages

Where do I Change Table Row Height with Styles?

I have created a lot of tables in the same document, and now I want to change the height of them. I have used Table Styles and Cell Styles, to be able to change things like this in *one* place instead of the 100 different tables...
I can't find where I alter the Cell Height (aka Row Height) in any of the styles. What have I missed?
Please help!

@Andreas – nothing. You missed nothing. You cannot define cell height or width with cell styles…
However you can do so with scripting. But not directly in scripting a property of the cell style, but in iterating through all table cells, finding out its cell style and acting on the cell directly (height, minimumHeight, maximumHeight and autoGrow properties).
Another scenario would be using a special plug-in like "Smart Styles" from Woodwing.
Uwe

How to increase row height in table control?

Hi experts,
We have a push button in table control created using screen painter. Since this is a touch screen transaction, the default height is very small for the worker in the plant to click on a specific row, i would like to know if there is any way to increase the row height in the table control. There is no attribute in Screen painter for increasing row height in table control. I did try "import dynpro", hoping to increase the row height and export the dynpro, but that doesn't seem to have row height attributes. Any help in this regard is highly appreciated. Thanks,
Raj

Using a new technology means you have to recreate your screen: you may create an HTML using CL_DD_* classes (that's called "Dynamic Documents"). See [SAP Library - DD programming guide|http://help.sap.com/saphelp_nw2004s/helpdata/en/13/12284b019511d4a73e0000e83dd863/frameset.htm]. Demos are provided in SDYNAMICDOCUMENTS package. Or I think you may create web dynpro and define a CSS style to enlarge objects.
If you don't want to create everything, maybe you can find out a workaround with GuiXT, for example creating a big button in each row (for example, with BUTTONSIZE, but don't know if it changes the height of rows but that's worth trying).
Well, [Synactive documentation about table controls|http://www.synactive.com/docu_e/specials/tables.html] does not seem to allow that.
Maybe you can move your question to the "scripting" forum and ask about how to do it with GuiXT...

CSS issue when changing the table row height to 16px

Hello,
After changing the table row height through css like this:
.table-row-cell, .table-cell {
-fx-cell-size: 16;
the table rows are correctly displayed with a 16px height but the cell bottoms seem to be incorrectly set.
For example the following css style (a red 3px bottom border):
.table-cell {
-fx-border-width: 0 0 3 0;
-fx-border-color: red;
doesn't work anymore with the new row height whereas it works with the 24px standard row height.
While investigating with Scenic View, I noticed that changing the row height changes the TableRow layoutBounds height (from 24px to 16px so that's ok) but not the boundsInParent height which remains to 27px. I think it should become 19px (16 + 1.5 + 1.5). I don't know if it's a bug.
Anyway, any help making the css red border working for a 16px row height would be greatly appreciated.
Regards,
Bruno.

Q: Would this help to just use absolute div tags and give me 'ABSOLUTELY ABSOLUTE' positioning?
No. APDivs are not a good primary layout method. Use default CSS positioning (which is no positioning at all). Align page elements with margins, floats and padding.
See example -- 2-Column CSS Layout with Grids
(View Page Source in your browser to see the code)
http://alt-web.com/TEMPLATES/2-col-fixed-with-grid.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Row height drive by a style

Is it possible to set the parameter "exact" or "almost" to define the height of a row in a table driven by a specific style??? I would like to set a specific hight to a cell style to control all cells with same style ...

indesign
Da: Pat Willener
Inviato: mercoledì 10 settembre 2014 11:34
A: Michele Predolin
Oggetto: Row height driven by a style
Row height driven by a style
created by Pat Willener <https://forums.adobe.com/people/pwillener> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/6716845#6716845>

Row height driven by a style

Is it possible to set the parameter "exact" or "almost" to define the height of a row in a table driven by a specific style??? I would like to set a specific hight to a cell style to control all cells with same style ...

indesign
Da: Pat Willener
Inviato: mercoledì 10 settembre 2014 11:34
A: Michele Predolin
Oggetto: Row height driven by a style
Row height driven by a style
created by Pat Willener <https://forums.adobe.com/people/pwillener> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/6716845#6716845>

Decrease the height of a row or table (Was: So this keeps not happening....)

I'm a guy that likes to figure things out for myself and have been scouring the web for the last 2 days but can't seem to even get close to an answer. I am extremely frustrated.
When insert a table, or import a spreadsheet or tabular information, I cannot decrease the row or table height, beyond a a certain point. no matter what I try: CSS, cell proeprties, handles.....nothing. PLEASE HELP.
I have no probelm adjusting the width of cells/tables but cannot, for the life of me shorten the row height to where I need it.
Furthermore, every tutorial I've read/watched that inserts a table shows the newly imsetred table with a normal row height....just barely higher then the text itself. In mine, the height in my cells is maybe 5 times more that what I need it to be. I can't lessen it for the life of me.
The webpage is www.yptusa.com/btp_itinerary.html
Thanks in advance for any help anyone can give me.
JR

In http://www.yptusa.com/CSS/btp_itinerary.css
padding: 0px;
margin: 0px;
background-repeat: no-repeat;
height: 100px;
background-position: center;
background-color: #f5f5f5;
the wildcard selector (*) applies to every tag and it's setting table cells to 100px high.

Report Generation Toolkit Table Row Height-MS Word

I am having trouble setting the table row height in the report generation toolkit. I can set the column width fine, but the row height seems to remain the same no matter what I set it to. I have attached the VI that generates and formats the table, and the printout it is resulting in. I have also attached the template file I am using.
Any tips to get this to work right? I am trying to make the cells exactly the same height as the text inside.
Solved!
Go to Solution.
Attachments:
AddMarkersToReport.vi ‏20 KB
badFormatting.pdf ‏179 KB
splitter.docx ‏13 KB

Hi,
So I tried .2 and it didn't work. So I went to Word to manually change it, and it did not work either. There is a selection box in word, for the table properties, that seems to default to the value "at least". When I changed this manually to "exactly" in word, no problem with the .2 manually in Word.
Hopefully this can be set within the template, for all new inserted tables. I'm not sure the report generator VI's expose this property. Well, this is a start for the issue.
Edit ****
You can go into the add table VI and expose the property. See pic. However, you have to decide if you want to "upgrade" this VI permanently to expose this property or make a copy with the property exposed. I haven't messed with the new class reports too much, so not sure of the ins and outs with this.
I think this is the issue with the row size becoming smaller.
Mark Ramsdale

Different row heights in one table - is this possible?

I want the height of each row in a table to be set to fit the contents of that particular row.
The column which drives the cell height uses the cell formatting options "Wrap Text" and "Row by Row Auto Fit". These options will set the row height of all rows to that which fits the tallest cell. What I prefer is to have one row height be 4, if that's all it needs, while the next row may have a height of 32 because of a long line of wrapped text.
Can this be done with DeskI XI 3.1?

In BO XIR3.1 the row height does not appear to be based on individual rows. Instead the row height is the same for each row in the table. Is there some setting that I need to adjust here?

How to increase the row height of the table in the smartform

Hi,
Can any one say,
How to increase the row height of the table in the smartform.
It is presently show the row width very small, i want to increase the row with of the table in the smartform.
Plase say how can we increase the row height in the smartform.

Hi Ravi,
In Smartforms , Select the Table and you can adjust the cell hieghts in OUTPUT OPTIONs TAB.
Reward points if that Helps.
Manish

Dynamically adjust table row height based on data in column

Hi all,
I'm using JDeveloper 11.1.1.5.0 and have a requirement for a table to adjust the height of its rows depending on the data in the columns. One of the columns in the table is a rich text description field and I have the 'rows' property set to 13. This field could have twenty lines of text/images or just one. The users would like the page to show all twenty lines of text without having to scroll but the table has the same height for all the rows (that I set to 13) and provides a scroll bar when the data exceeds this size. My users do not like to scroll, and want the height of each row to be determined by the data in it. I looked at a few options and also did a search online, but was unable to find anything to fulfill this requirement. Do you know of how I could change the height of each row in the table so that it fits the data that it holds?
I have an example of my table at: Table with Set Row Height
As you see, the picture has to be scrolled so that the whole picture is visible. The user requirement is to adjust the row height to show the full picture. Ideally the next two rows would shrink, but that would be a nice to have.
Thanks in advance for any pointers or help.

Hi Frank,
Thank you for replying to my question, I truly appreciate your help.
I tried to use the autoHeightRows to adjust the height of my rows but was unsuccessful. If I understand the autoHeightRows property correctly, this is used for setting the height of the whole table. If this is incorrect and it can be used for setting the height of individual rows in the table, please correct me. I have the 'Rows' property of the richTextEditor set to 13 and this is the height that I would like to make dynamic based on the data.
My users requirement is for the height to be big enough for the data in each row of the table (the table has a description column and the height of each row should be determined by the data contained in it). I updated my Screen Shot to show the desired layout and what is currently being generated though ADF (http://www.flickr.com/photos/87583386@N05/) .
I have three rows in the example (in actuality these are around 50) and the text in each row can vary. The users would like to see the full text/image in each row without having to scroll each row. Currently my table is within Panel Box, which is inside a PanelGroupLayout-Scroll which is in a PanelStretchLayout. I tried to put the table by itself with the autoHeightRow modifications you suggested but thsi did not help either. I am using JDeveloper 11.1.1.6.
Is this possible with an ADF Table? If it is, is the autoHeight property the only one that I am setting incorrectly? If not, is there another component I can use to get the desired functionality? My users are very strict about this requirement and will not accept the application without this.
Thanks,

Table Component and Row Height

I am using XCelsius 4.5 and using the table component. Is there anyway the row height on the table component can be linked to the Excel file? It is not dynamically changing or wrapping text based on the amount of data that is imported in.

Judging from the stack trace this has nothing to do with your variable row height. You are simply not respecting some array bounds (maybe your data array for the table model) when you insert the new row.
In newRouteFare() do you fire a tableRowsInserted event? Or something similar? Check the rows passed into the Event object to see if you are exceeding the limits of the current table model.
Thomas

Table row height adjustment

I am attempting to insert a table to create an online
business directory for my city. When I enter the table, it allows
me to set my number of columns and rows, as well as the table
width. However, it automatically sets the row height to 240 pixels.
When I try to change the row height to something more reasonable,
it gives me this error message:
"Making this change would require changing code that is
locked by a template or translator. The change will be discarded."
Which I assume means something I did when creating my
template for my website locked this in, but I have no idea what I
did or how to fix it. Any ideas??
Thanks so much!!

That's ok so far. A paragraph sign at the end of a text forces a new line.
To change that do the following:
For every condition you need another condition just for the paragraph sign that comes immediately after the condition. Not after every paragraph of one condition, but at the end of every consecutive numbers of paragraphs of the same condition.
So in your third example you'll need two conditions more:
1. One for the paragraph sign at the end of condition "meaasurements"
2. One for the paragraph sign at the end of condition "price 2"
Whenever you make the other conditions invisible, you also have to turn off the new conditions that only control the paragraph signs.
See the following screenshots:
Uwe

CS2 automatically fit row height to content in table?

Hi guys, I'm using CS2 and I have a table with lots of pages. I need to be able to have the height automatically fit to the content of the tables. Unfortunately data is not consistent therefore some cells have 2 rows of content, others 8.
Automatically fit to content is not available.
I have tried adjusting row heights then 'table' > 'distribute rows evenly' but obviously this is no good as some are too cluttered, others too spacious.
Any suggestions appreciated.

Huh. Maybe I read the OP's posts correctly, I think, but I misread yours. I assumed that, since the thread-opener mentioned row height, that when the OP asked about getting rid of "distribute evenly" that row height was still under discussion. Looks to me like all you can do with cell width/column width is
1) Select a column and specify an exact width
2) Select a group of columns and specify the same exact width for all of 'em
3) Select all the columns and
a) Distribute columns evenly
b) Specify an exact width for all columns
Unfortunately, I have to use tables a great deal, so I feel like I'm up to speed on what we can and cannot do with ID tables.

Row height in tables

Hello,
I want to set the height of tables rows but I couldn't find the function or the right way to do it.
The table is in Column mode.
The row size mode is set to Use Explicit Size
First I remove all rows and columns and then the following code:
InsertTableColumns (SA_ScatPosPanel, P_MULT_ROT_Z_TABLE, 1, NbX_Points, VAL_USE_MASTER_CELL_TYPE);
ColWidth = PlotAreaWidth / NbX_Points;
SetTableColumnAttribute (SA_ScatPosPanel, P_MULT_ROT_Z_TABLE, -1, ATTR_COLUMN_WIDTH, ColWidth);
InsertTableRows (SA_ScatPosPanel, P_MULT_ROT_Z_TABLE, 1, NbY_Points, VAL_USE_MASTER_CELL_TYPE);
What should I add for setting also the row heights?
Thank you
Solved!
Go to Solution.

I finally found the solution.
I did a mistake, by setting Size Mode to Use Explicit Size in the first row in the uir I thought it was the default value for all rows.
I think the documentation is not completely correct because it says that SetTableRowAttribute has no effect on existing cells but for the row height it has. That's the reason why I was looking to find a solution with SetTableCellRangeAttribute () as recommended.
I also tried with SetTableRowAttribute but because Size Mode was not correct it didn't work.
With this code it works:
for (i=1; i<=NbY_Points; i++)
InsertTableRows (SA_ScatPosPanel, P_MULT_ROT_Z_TABLE, i, 1, VAL_USE_MASTER_CELL_TYPE);
SetTableRowAttribute (SA_ScatPosPanel, P_MULT_ROT_Z_TABLE, i, ATTR_SIZE_MODE, VAL_USE_EXPLICIT_SIZE);
SetTableRowAttribute (SA_ScatPosPanel, P_MULT_ROT_Z_TABLE, i, ATTR_ROW_HEIGHT, RowHeight);

Min. row height table style

Similar Messages

Maybe you are looking for