Mini 210-2007sl memory upgrade

Hello Sirs,
I wanted to upgrade my Mini 210-2007sl to 2Gb. The original memory was marked:
ELPIDA 1Gb 1Rx8 PC3-10600S-9-10-B1
I supposed some "flexibility" of the hardware so I bought a Kingston KVR1333D3S9/2G, but it doesn't work (screen stays black forever)
Is this related to number of memory chips installed in the module (8 for the original module, 16 for the Kingston part) ?
Could you suggest a compatible memory from Kingston ?
Thanks a lot,
Mario

Hi, Mario:
Here is the Kingston memory module you need for your notebook:
Search Results for: HP/Compaq Mini 210-2007sl
Memory upgrades:
KTH-X36S/2G
2GB DDR3 667MHz Single Rank Module
http://www.ec.kingston.com/ecom/configurator_new/partsinfo.asp?root=us&LinkBack=http://www.kingston....
Paul

Similar Messages

Loss of bluetooth range on mac mini (lion x/memory upgrade)

I have a mac mini 2009. I just upgraded to lion x and added 3GB of RAM. For some reason my bluetooth mouse and keyboard have lost their range. They both work but I have to use them within a foot of the computer. Ive replaced the batteries.. any help is greatly appreciated

I fixed this last night (Mac Mini, Late 2009). If you have upgraded your RAM there is a strong possibility that the bluetooth antenna came loose while reassemling the mini. I was very careful installing ram, but last evening when I dissassembled the mini I found that one of the bluetooth antennae was disconnected. Popped it back in, reassembled, and my reception went from 1 foot back up to the full extent of the room. If you are having range problems, take it apart (ifixit.com) and check it.

2 GB Memory upgrade for HP Mini 110-3025tu

I recently bought this laptop HP MINI 110-3025tu
Specs
-atom n475
-1gb DDR2
My problem/our problem is this.
When i installed a new 2GB DDR RAM into MINI 110 and turn it on, it show black screen and no LED blink, just power button light on
then i remove the new RAM and install the original one into MINI 110 and turn it on again, it still got black screen
Please tell me if i can do something to fix this problem
Much thanks!
Joe

Yes, the issue is with Memory Controller on N455/N475 processor. It is having issue with working, with any and every DDR3 memory module...Here is on going thread, where couple of memory module are listed, that reportly is working...
http://h30434.www3.hp.com/t5/Hardware/HP-Mini-210-1102TU-Wont-Accept-2GB-ddr3-no-boot/m-p/317562#M32...
http://h30434.www3.hp.com/t5/Hardware/HP-Mini-210-1102TU-Wont-Accept-2GB-ddr3-no-boot/m-p/318498#M32...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Upgrade hp mini 210-1014TU,processor intel atom N450,ram 2gb ddr 2

Can I upgrade my hp mini 210-1014TU processor?

Fahmisahaka wrote:
Can I upgrade my hp mini 210-1014TU processor?
Hi,
The following link shows its specs:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01968363
You can't upgarde CPU unless changing motherboard (= buying new machine). You can't upgrade RAM to 2Gb because it only supports 1Gb of RAM, max.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Mini 210 Upgrade to Win 8-IT WILL NOT

I have asked this question in many forums including MS and even an HP employee responded and disappeared when I confirmed the question and problem. Does anybody know if indeed any current purchase of an HP Mini 210 will not be able to utilize the metro interface in WIn 8 when released if the screen resolution maintain at X600 since the consumer preview currently requires 700+? I truly would have never purchased a notebook that would be so close to an OS upgrade and not able to take advantage of the features that are pretty much supposed to be designed for that line of product.
Thanks for any info that can be provided-

Unfortunately, that didn't work. I uninstalled all versions of Firefox, and deleted the Mozilla / Firefox program folders. Then I tried to install the newest Firefox version with no success. Here's what happens: 1. The install completes succesfully. 2. When I go to start firefox, I get an hourglass for a few seconds, and then nothing.
When I start firefox with the Task Manager running, I can see Firefox.exe running for a few seconds between 39-50% CPU. But, then that stops after a few seconds.
Something else that is interesting: I can force firefox 8 to run when I click on a hyperlink from MS Excel. I just can't run it from the start menu, desktop, or taskbar. After I start Firefox with the hyperlink, I am successfully able to start a new session (not tab) from the taskbar.

Upgrading HP-Mini 210-1000 RAM

Hi everybody! I need to know if my HP-Mini 210-1000 supports 4 gb of RAM. Thanks a lot!!!

Hi:
The maximum amount of memory your PC can use is 1 x 2 GB of PC2-5300.

Mac Mini has slowed since upgrading to Yosemite

I have recently experienced a decrease in the speed of of my Mac Mini. I have upgraded to 8GB of RAM and still doesn't seem to help... Any suggestions?
EtreCheck version: 2.2 (132)
Report generated 5/4/15, 9:45 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac mini (Mid 2010) (Technical Specifications)
    Mac mini - model: Macmini4,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 320M - VRAM: 256 MB
        SAMSUNG 1920 x 1080
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:45:44
Disk Information: ℹ️
    TOSHIBA MK3255GSXF disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 319.21 GB (182.58 GB free) - 144 errors
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-STDVDRW GA32N
USB Information: ℹ️
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
Firewire Information: ℹ️
    WD My Passport 071D 800mbit - 800mbit max
        EFI (disk1s1) <not mounted> : 210 MB
        iExternal Drive (disk1s2) /Volumes/iExternal Drive : 2.00 TB (1.83 TB free)
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.leapfrog.connect.shell.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Monitor    Application (/Applications/LeapFrogConnect.app/Contents/Monitor.app)
    iTunesHelper    UNKNOWN Hidden (missing value)
    WDDriveUtilityHelper    UNKNOWN (missing value)
    WDDriveUtilityHelper    Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 319.21 GB Disk used: 136.63 GB
    Destinations:
        Time Capsule [Network]
        Total size: 997.71 GB
        Total number of backups: 27
        Oldest backup: 2015-04-10 05:35:53 +0000
        Last backup: 2015-05-05 03:49:23 +0000
        Size of backup disk: Excellent
            Backup size 997.71 GB > (Disk size 319.21 GB X 3)
Top Processes by CPU: ℹ️
         7%    WindowServer
         1%    nsurlsessiond(2)
         0%    cloudd
         0%    fontd
         0%    taskgated
Top Processes by Memory: ℹ️
    558 MB    kernel_task
    172 MB    com.apple.WebKit.WebContent
    106 MB    ocspd
    74 MB    Finder
    74 MB    mdworker(6)
Virtual Memory Information: ℹ️
    4.38 GB    Free RAM
    3.62 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 4, 2015, 08:54:09 PM    Self test - passed

Take a look at this article: http://www.cnet.com/how-to/five-tips-to-speed-up-your-mac/
Try these steps:
- Shut down your Mac
- Wait until your computer turns off and after that press the Power button
- Right after you hear the startup tone, press and hold the Shift key
- Release the Shift key when you see a grey Apple sign and the progress bar below this sign
- Once you see Desktop, start a Disc Utility scan to detect and repair file system errors (don't forget to choose your main hard drive)
- Click on Verify Disc and then, if asked to fix problems, on Repair Disk
- After this, click on Verify Disc Permissions and then on Repair Disc Permissions
- After the process is finished, shut down your Mac and turn it back on after about 30 seconds
Hope this helps!

HP Mini 210-1102TU Wont Accept 2GB ddr3 no boot.

Goo day!
I recently bought this laptop HP MINI 210-1102tu
Specs
-atom n475
-1gb DDR3
-250gb hd
This is my replacement with my 1year old hp mini 110 n280.
My problem/our problem is this.
It seems we CANT upgrade the memory into 2gb ddr3 1066 single stick. i already tryd 2 Diffirent Brand Kingston and Team elite.
Store where i bought my laptop told me HP BIOS does not accept 2gb DDR3 only 1gb ddr3.
to HP team Please Release a bios that will support our hp mini 210 DDR3 variant to accept 2gb ddr3. since our old hp mini 110 accepts 2gb memory and some for the HP mini 210 DDR2 variant accepts 2gb.
Thanks im hopping for answer from HP. regarding this matter and release a new bios that will allow us users to upgrade to 2gb DDR3
Much thanks!
-Pao

Hmmm...interesting...Mini 210 with new Atom processors (N475) should support 2GB of DDR3 1333...
What is the BIOS version do you have?
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

HP mini 210 and un2400 Qualcomm

Dear All,
did anyone try to physically install a Qualcomm un2400 3g card into an HP MINI 210 (1020)? Is it compatible with the internal shape of the machine? Does it use the back SIM card slot (behind the battery)?
I read about this piece of HW in various forums, but only related to SW installation, while I have a brand new HP mini 210 _without_ the 3g connectivity and I'd like to add this card to my machine (but only if it is compatible and can fit in the chassis).
Thanks, Alessandro
Alessandro Guarda
Senior system integrator
Coca Cola Hellenic Bottling Company
Italia

Hi
Please find the link given below might help you it very clearly says you can upgrade Memory upto 2GB on your unit.
HP Mini 210-2200ew PC Product Specifications
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

HP Mini 210-1094NR recovery

Hello, I need help now.
Trying to fix an HP Mini 210-1094NR running Windows 7 Starter. Boots up to the Windows Error Recovery screen which gives me two options.
1. Launch Startup Repair
2. Start Windows Normally
Well you can guess which one(s) don't work.
The repair option got stuck in a loop, hard disk light flashing once every 3 seconds. Left it for over 36 hours and it said it was repairing.
So it is hammered. Is there a recovery partition to access? I have the manual and it said to hit F11 or the Window button to access a possible recovery partition. However, these just bring me back to the Recovery screen with the same options that don't work.
Any help for this unit???
Thanks.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!
This question was solved.
View Solution.

For those interested. Installed a new disk and reloaded Win 7 Starter and used the Activation Key found under the bottom cover and the unit is back up and running! Upgraded the memory to 2GB and she runs pretty good.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Problem after ram update hp mini 210 1100

hp mini 210 1100, intel atom 475, win 7 starter 32 bit:
after upgrading to 2 giga ram computer does not work properly - win does not start or if starts freezes with black screen.
new memory stick is ok - works properly on another same computer.
when original 1 giga stick reinstalled computer functions well.
need help...
thanks

Hello yoyo5. I understand you're having trouble booting after installing new RAM.
What are the specifications of your new RAM? It is possible it is incompatible with the motherboard.
Have a great day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Blocked GSM Slot in HP Mini 210

I have a HP mini 210 series laptop with builtin GSM card Slot which is physically blocked. I checked in the system help files & it says that the Slot is provision only. Any ideas when it will be made usable by HP and if it has been already, what is the process of activating it? Pls advise.

Hi:
Other people on this forum have upgraded their notebooks with W7 Starter to 2 GB of memory and even though the service manual states only 1 GB will be recognized, they report that a 2 GB are recognized in the BIOS and operating system and 2 GB works fine.
Below is the link to the service manual which will tell you what speed memory to get. Again, 2 GB will work fine with W7 Starter.
http://h10032.www1.hp.com/ctg/Manual/c03163704.pdf
Paul

WIN 7 Home Premium and a HP mini 210-1000!

Have mini 210-1000, refurb, came with a WIN 7 Starter, never did check and record the product key that came with...ERROR!
1. Went on line 12 days ago and purchased WIN 7 Home premium. Have spend HOURS on line with MS techs trying to get it to install. Came here before I waste any more time.
This machine has 1G RAM - CAN it install WIN 7 Home premium?
2. Since the last attempted install (MS using PowerISO Virtual Drive Manager (free download ver.), and which was UNsuccessful, my HP and MS now tell me that my WIN 7 Starter is 'not genuine' and they give me several options to obtain the product key.
The product key in control panel/status is not EVEN in the correct format and starts with 2 (unacceptable) zeros...
IF this machine was refurbed by HP or Contractor, does HP have a usable product key to return me to normal operation? Am having trouble re-reaching the MS tech, I believe HE's out of ideas...
ANYone know a guru ? Am not quite ready to invest $$$ to fix a mess that MS started - and it's a long, long story...which takes me back to the original question: am I asking my Notebook to install WIN 7 Home Premium when it's not able??
Thank you for any help you can provide!
Marty

Hi, Marty:
Please read the info at the link below and see if you can do a clean install of W7 HP.
http://randomwindowstips.wordpress.com/2009/12/05/windows-7-clean-install-upgrade-license-key-error-...
Paul

Brightness doesn't work in Windows 7 on Mini 210 HD

Hi,
I've bought a Mini 210 HD a month or two ago, and i promptly removed XP to put Windows 7 Ultimate (32-bit) on it. This has worked more or less OK, but ever since upgrading i have been unable to use the brightness functions of the lap-top in any way. Not only can i not adjust the brightness with the hot keys, Windows will not dim the screen when i remove it from the mains or leave it to idle, and although i can move the brightness slider in the Power Options control panel, it has no effect. (Currently it is on the lowest setting in Windows, but the hardware is still on maximum brightness.)
I have re-installed the Intel chip-set drivers and the HP keyboard drivers a half-dozen times, these don't seem to be the problem. There is also nothing relevant listed in Windows Update, and there are no problem devices listed in Device Manager.
Is there anything i can do about this?
configuration:
HP Mini 210 HD
Windows 7 Ultimate (32-bit)
Intel GMA 3150 driver 8.14.10.1972
Microsoft x86 ACPI driver 6.1.7600.16385

Alrighty, Here ya go! I had this problem also. Got my HP mini 210HD and put Windows 7 on it right away. Brightness wouldn't change, function keys didn't work, brightness slider did nothing.
Solution:
Make sure you download the graphics drivers from HP's website, not Intel's. The brightness setting won't work with the Intel graphics drivers.
Get "Intel Mobile Graphics Driver for Microsoft Windows 7" from HP's website.
I have Windows 7 32bit, so I downloaded this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-78614-1&lc=en&dlc=en&cc=us&...
This should work for you Ohkine.

My HP mini 210 will not boot up. The repair utility starts, but runs and runs with no results.

My HP mini 210-2080NR will not boot up. The repair utility starts, but runs and runs with no results. Safe mode start up also fails. Tried BIOS diagnostics with f10, memory passed, but HD startd but did not finish. Diagnostic log shows rusult 0303. Any ideas would be helpful. Thanks.

You can order HP recovery media here, or call HP on the phone to order 1-800-474-6836
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&lc=en&dlc=en#N76
If HP no longer has Recovery Media for your model, order them here
http://www.computersurgeons.com/Default.aspx

Mini 210-2007sl memory upgrade

Similar Messages

Maybe you are looking for