Mini audio goes away.

My wife has a Mini that's only a few months old. When it sits overnight or for an extended period the audio goes away.
Rebooting brings it back to proper operation. Sound level is up on the speaker control so that's not changing.
It just goes quiet until she reboots it!

Long shot, but next time it happens...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

Similar Messages

Audio goes away

Hey guys. Another simple question. When importing and working on a project in premiere, the audio is fine. But once I close the project and reopen it, the audio isn't there. Where once you could see the audio, now all I see is straight blue lines where it should be. What am I doing wrong? Thanks

Prelude has occasional burps, though generally it does what it was designed to do. Which actually was to log in tons of footage for say TV news stations & such. A job done typically by junior assistants. They by design would be sitting at a computer, viewing clips in Prelude, marking & ingesting with metadata comments the pieces that seem worthwhile & dumping the rest. They'd have presets for where different types of stories say would go, with everything getting transcoded in the subclipping & immediately put onto say three different storage systems for backing up on ingestion.
Rough-cutting a timeline is an additional bonus, used by a more experienced "handler" to actually start a bit for the final "show" team to whittle down. Or used to prep from the original ingestion again, to send to the teams that put together the nightly show. In some TV sitcom/drama/reality-show use, this is the way all "cards" & drives of a day's shoot get logged & loaded for pruning later, and again, may be by varying levels of low to middle staffers.
Somehow you'd think that sending stuff like rough-cuts directly to PrPro would be a snap ... but whilst I was still trying to utilize it in my shop, and over at the Prelude forum daily ... the two most common complaints were that rough-cuts were oft too rough-cut to work as a sequence/timeline in PrPro, and that the lovely ability to make custom metadata fields went splat when you got to PrPro as getting PrPro to do anything other than simply show such fields was problematic at best. Sorting or searching by custom fields can be difficult, though I understand that has been improved. How much I do not know.
Personally, I wish that Prelude had some kind of database capability, so that it was closer to Lightroom than Bridge. Adobe doesn't share my dream on this, however ...
Neil

HDMI Video appears then goes away

I have a Pioneer Plasma TV thats about 7 years old. When I hooks up either my cable box or my AV receiver to the TV via HDMI, the video will appear for about 2 seconds then goes away. The audio is good. What is confusing is that I can see the cable box menu, and the channel info when I change channels, I just cant see the video. Any ideas?

This could also be an HDCP issue.
http://en.wikipedia.org/wiki/High-bandwidth_Digital_Content_Protection

Going away for a month with no Macbook

So, I'm going away for a month to Scotland/Europe and not able to take my Macbook Pro (13", late 2010 model, snow Leopard 10.6.8) because last time I took it, it broke and had to be fixed and I was only able to cause it was under warranty. So, I'm going to shut my Macbook down and I've heard things like put the battery down to 50% or whatever. I want to come back to this working cause I'm afraid to take it with me incase it breaks, though I'm pretty sure it broke cause I accidentally left it on sleep for 2 weeks, but is there anything special I should do or will me shutting it down at 100% battery be enough? Thanks!

Ideally, a place where it is room temperature (68º to 75º F.) If you have air conditioning then set the AC temp to around 80º. That's what I set mine at when we are gone for long periods of time. Seems to be OK for all of my computers including several notebooks. Modify accordingly if you away during the winter months. If your home is not air conditioned (my condolences ) then some place dark is usually good.
Apple's recommendation for storage is
Storage temperature: –13° to 113° F (–24° to 45° C)
So, if you keep within those extremes you should be OK.

HELP! Audio goes out of sync after export!

OK, folks. I need your help. I have a looming deadline of THIS FRIDAY to hand this in.
I have a finished multicam edit of a show that runs 1 hr 20 min. It plays back perfectly in the timeline, all video and audio perfectly in sync. Looks and sounds exactly like what I need.
When I export the video as an H.264 file, the audio gets out of sync with the video by 13 frames! But that's not all... It doesn't happen to the entire audio track. There's about 50 minutes in the middle of the video where the audio goes out of sync. The audio at the beginning and ending of the video is lined up perfectly in sync. It's just the middle section that gets screwy.
What do I do?!
This has never happened before, and I've worked a lot with multicam in Premiere Pro CC before this. Never been an issue. I tried uninstalling and reinstalling Premiere, and also deleting all media cache files, but still no dice. I also tried copying the clips into a new sequence in the same project, copying the clips into a new sequence in a NEW project, nesting the sequence... nothing works.
My setup:
MacBook Pro Retina (Rev. A)
Premiere Pro CC (latest version)
Panasonic GH3 footage in 1080p 24p AVCHD timeline
3 cameras & 1 audio WAV file in Multicam
Any help would be greatly appreciated!

OK, I figured out how to fix it:
In Premiere Pro CC, click on SEQUENCE > DELETE RENDER FILES.
Try exporting the movie again.
It worked! I exported the same sequence, and it took a long while to re-render the audio files, but when it was finished exporting the audio and video were in perfect sync. I'm not sure what caused it, but this fixed it, so hopefully anyone else having this issue can save a lot of time by reading this.
Cheers!

Audio goes out on my Air after I unplug my headphones.

Audio goes out on my Air after I unplug my headphones. Reset did not fix it.

Hi johnfan1939,
Although this article specifically mentions the iPhone, many of the steps apply for the iPad as well.
iPhone: No sound or distorted sound from speaker
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:Restart the iPhone.Restart the iPhone.
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Best Regards,
Nubz

HD noise when flat, goes away when tilted back now wont boot

hey guys... i've been reading some of the discussions about HD noises and sounds. it seems like everyones HDs make noise or slow down when tilted. I HAVE THE COMPLETE OPPOSITE PROBLEM. i apologize for the long post:
12" Powerbook [purchased 05/04 and well taken care of]
mac OSX 10.3.9
original toshiba HD 60GB
its kind of weird. i was running ichat, iphoto, safari, photoshop, and iflash [flashcards] all at the same time when i noticed a significant slow down in performance which stalled all programs. i then head a loud whiring humming buzz that sometimes turned into grinding. of course this freaked me out. i tilted my powerbook backward to give it a listen and then the noise went away. not only that all the programs completed all previous requests faster than ive ever seen them perform before. well i repeated this to see if the effect was reproducable, and it was.
well the next morning i turned it on and my powerbook was working fine. no noises or indications impending failure. well i had to leave the library so i shut my powerbook off but the filevault program wanted to recover unused HD space so i let it do its thing. when i tried to power on my powerbook it got to the grey screen with thespinning gear and wont get past that point.
figuring that it was an HD problem, i got my buddy's ibook, set my powerbook into firewire mode by booting and pressing "T", and connected them. i was able to recover data off of my non admin accounts using Migration Assistant but my main admin account wont let me even touch its files due to the filevault settings. i found away to at least get to my files in the main acct by mounting its .ars [i think thats wht it was] image i found under my non main admin account user folder. the thing that gets me is that i can easily access my HD in firewire mode, but the powerbook itself wont get past that grey apple screen. it makes unusual noises and then stops and stays stuck on that screen with the spining gear going.
now this is a major headache since im a med student and i need my powerbook to access my flashcards, notes, and online resources. ive come to realize how dependant ive been on this machine. can anyone help me? is it my HD thats the problem? is it a filevault thing? do i just need to reformat? why do i get that sound when the PB is flat but it goes away when its tilted? now im kicking myself in the butt for not getting applecare.
thanks guys,
Edward
MS2 Ross University School of Medicine
evilmcnasty.blogspot.com

Edward:
Last week, my PB started making the same noise that you've described, which is opposite of the other posts, ie buzzing when flat, quiet when tilted. I ran disk utility, TechTool Deluxe (that came with AppleCare), etc without finding anything wrong. Yesterday, I noticed that my s.m.a.r.t status shows my hard drive to be failing (in red letters). My understanding is that it will fail eventually, even though I am using the computer without incident right now. Suffice it to say, I have backed everything up and am waiting for the inevitable moment. I plan to call AppleCare today (sorry to hear you don't have it) to enquire about what I should do. In particular, I cannot go without a computer right now, this malfunction being at the least opportune moment. Can anyone say if AppleCare will give me a loaner until my PB is healthy again?
I realize that this post is of little use to your situation, but I just wanted others to know that the "opposite buzzing sound" exists and that it seems to indicate an eventual failure if mine is the typical result of the first buzzing symptoms.
Good luck with yours.
Ernie

Bluetooth goes away

I have one of the latest ibooks. From time to time my bluetooth connection just goes away and the icon greys out in the toolbar, like the hardware doesn't exist.
After this happens I notice that my airport takes much longer to get its IP address after waking from sleep. Anyone else having this problem?
iBook 14 1.42 Mac OS X (10.4.3)

Mine did that. I had to restart to get things back on track. Also I realized I hadn't run the clean up scripts at night. I used MAC JANITOR and have not had a problem since.

I write Journals on iphoto but with ios8 the journal goes away so I haven't upgraded. However, a journal I was working on last week won't function now. What should I do?

The journal function of iphoto is going away with ios8 so I haven't upgraded as I have a journal I am working on and several I want to save. The journal function will now not let me write in it and it won't save to itunes. Help.

No, not paired to anything else, fresh out the box connected to the mac mini I bought at the same time, never been paired with anything else.
I think it's a hardware issue. As I don't seem to be able to get it to turn off.

Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

You said you updated yur 1G iPod to 4.2.1. A 1G can only go to 3.1.3 and thus you must have jailbroken it to get to 4.2.1 and that can cause problems.
ArealDJ wrote:
I have the same problem.. apps won't download and won't open. I have a 1st Gen ipod touch and recently upgraded my MacBook Pro (2012) and as soon as I upgraded the iPod Touch to 4.2.1, this happened. I restored to factory defaults and still cannot dl and open apps. Any way to diagnose this problem? Apple tech charges $29.99 for out of warranty products and if I am reluctant to pay with them telling me its simply a hardware problem.

Can some body give me an advice, my cursor can not be controlled after I shut it down, and open again. But this problem goes away after I closed and opened the lid

Can some body give me an advice, my cursor can not be controlled (using pad) after I shut it down, and open again. But this problem goes away after I close and open the lid.

Boot from your OS installer disk and run Repair Disk from Disk Utility.

The curser includes a text box from a previous image or link when the curser is positioned on the side of the page. i click and it goes away but only to return again on the next launched page. how do i get rid of this?

the cursor includes a text box from a previous image or link when the cursor is positioned on the side of the page. it will mainly happen when i hit "back" from the page i was on. i click and it goes away but only to return again on the next launched page. i also keep several tabs open and it will carry over to any one of them i go to. how do i get rid of this?
== This happened ==
Every time Firefox opened
== when i upgraded to most recent version 3.6.8

A number of extensions can cause that problem, you'll need to do a little troubleshooting to find out which extension is causing that to happen for you.
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

I get "an error has occurred in the script on this page" it comes up for no reason on Firefox and I can't remove the message, it then goes away on it's own after 3 minutes? how do I prevent this message coming up? I have Windows 7.

I get "an error has occurred in the script on this page" it comes up for no reason on Firefox and I can't remove the message, it then goes away on it's own after 3 minutes? how do I prevent this message coming up? I have Windows 7.
I can work the screen behind the message which stays in the centre of my screen.

Windows version is...?
What pages are giving you problems? [post links to same]
Are you getting the script errors only when attempting to print or...?
Has your printer's manufacturer confirmed that your currently installed printer software is IE11-compatible (yet)?
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

HT201317 I have a MobileMe account and have shared many MobileMe Galleries. MobileMe Galleries are going away in June. How can I share a photo album with others using iCloud?

I have a MobileMe account and have shared many MobileMe Galleries. MobileMe Galleries are going away in June. How can I share a photo album with others using iCloud?

The new ios version of iPhoto allows sharing. Here's a blurb from Apple's web site:
There’s the old way of creating photo galleries, then there’s the iPhoto way. Select a group of photos and iPhoto automatically flows them into a beautiful journal that’s fun to personalize and share online. Touch a photo to make it bigger or smaller. Or drag it to a different spot on the screen. iPhoto adjusts the page around whatever you’re doing, so your journal always looks great. You can even add captions, maps, dates, and weather — giving family and friends the big picture at a glance.
More things you can do:
With iPhoto, there’s more than one way to share a photo. Post pictures directly to Facebook, Flickr, or Twitter. Play an impromptu slideshow on your iPad or iPhone. Or stream photos to your HDTV to give your big moments room to shine.
I have not used ios version of iPhoto to share "journals" and I'm not sure this is part of iCloud or not. You'll have to do a google search on "ios iphoto" and read up of this journal thing. As far as I know, this is the only way of sharing photos. I'm not sure whether other friends use a browser to view these journals or whether they need something special. Any way - search around to find answers.

How can i reset my app store setting? i have signed in and out with my own apple id but i used a different one at first and that one is not going away

How can i reset my app store setting?
I have signed in and out with my own apple id but i used a different one at first a few years ago and that one is not going away how do i change it to my own apple id?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. Your only option is to delete the content and buy it again with the new Apple ID.

Mini audio goes away.

Similar Messages

Maybe you are looking for