Mini, Bootcamp, XP Pro, monitor no work

Hello,
I believe I have a resolution issue.
Mac mini, Bootcamp, XP Pro. Dell 22" display
On start up I get to the "windows XP" screen and then it goes black.
I can start in safe mode and the display works.
I have 3 resolution options while in safe mode but I dont think they "save" because I change them then restart and get to the xp screen and then nothing.
Any ideas?
Thanks much

It was a resolution issue, got an older monitor, rebooted, reset the resolution, swapped back to the new monitor and all is well.

Similar Messages

2011 mini-thunderbolt port to monitor not working

I have a 2011 i5 Mini which I am using as a media server - hdmi port to my tv and the Thunderbolt port to my 1920x1080 monitor. The problem is with the Thunderbolt port.
I understood that I could use a Mini Displayport (MDP) adapter and go to the monitor either as VGA or DVI. Hooked up the MDP-VGA adapter and all was good for the last couple of weeks: both the monitor and the TV works and the monitor also worked fine with the TV off.
However, today, the monitor wouldn't show a signal. Figuring it was the cheap monitor, it pulled it and hooked it to a 2010 mini and it worked correctly with dvi and vga. Put it back on the 2011 Mini and tried a MDP-DVI adapter, but no joy. Image came on the monitor for perhaps 2 seconds and then disolved to just white noise. Re-booted with same result.
Pulled the HDMI cable that was going to the TV and used the supplied HDMI to DVI adapter to the monitor and it now works, but now I can't use the TV.
I am assuming that this is a trip to the Apple store for warranty work unless anyone has an idea to try. BTW, the 2011 MIni is fully up to date according to Software Update.
Thanks, all.
Peter

Solved the problem with a new dvi to mini-display port cable from amazon. My 2 adapters must be bad.
Peter

Macbook pro monitor not working

prior my macbook was working flawlessly, no issues. but now its screen is not turning on, not even being picked up. the camera on the laptop works, everything else works perfectly, but the screen does not respond.
im out of apple warranty so i apple is of no use and ill have to fix this myself. is there anyway i can test or view the status of the laptops components to see where the issue is?
thanks

When the screen isn't working, if you shine a bright light into the screen, can you faintly make out that the screen really is there, just not lit up? If so, that means the backlight isn't on. And that usually means the power supply for the backlight has failed.

Dual monitors not working in bootcamp?

Recently added 8 more gigs of ram, and after this my video driver shows a triangle with an ! under bootcamp running windows 7,
i have tried countless times to update the driver to no evail
even used the bootcamp drivers from the original discs to repair bootcamp and nothing has helped!!
what can i do?
before the memory upgrade the monitors worked fine under bootcamp, but now they only show 1 and will not show both!!
thanks!!
(possibly a windos 7 issues?)

The hatter wrote:
You realize you do need graphic driver, and Nvidia has Windows 7 (32/64), and ATI is suppose to have a universal driver. No mention of what your card is. And I would hope x64.
Good grief, but please a) don't use Apple drivers, b) always use the "troubleshoot compatibility" for any installer (control+click on the application) before running. Apple is treated as not supported and won't install (now) with build 7077 (after feedback finding it causes errors, love the way their feedback and testing really does work).
Boot Camp can 'doorstop' in some cases a good installation.
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0
Use Driver Sweeper and then reinstall the latest compatible driver. And no, dual monitors does work.
mine is the ati radeon 2600 hd xt and it worked flawlessly up until about 2-4 days ago,
oh well, xp pro it is then,
i dont want the headache of dealing with windows 7 beta!
xp should be fine to use correct?
will there be any other steps i will need to take in order for everything to function together well?
thanks

Dual monitor not working under Boot Camp on Mac Pro ATI HD 2600 XT

Recently got a brand new Mac Pro with ATI Radeon HD 2600 XT graphics card.
On the Mac side (Leopard), everything works perfectly: my second monitor (a plasma screen connected with HDMI to the second DVI of the ATI card via HDMI/DVI adapter) is fully recognized and it works as an extended desktop or in Mirroring mode.
Under Boot Camp (Windows XP Pro) however, NOTHING: the second monitor always appears in the display properties, but it is grayed out (inactive), and when I try to activate it, it switches back to being grayed out immediately and nothing gets displayed on it.
After reading all the posts I can find on the topic, I tried the following (in pretty much every possible combination - Thank god for WinClone that allows me to restore the Boot Camp basic install image without having to reinstall Windows from scratch every time):
a) Bootcamp 2.0 (installed by default by Bootcamp assistant)
b) Update to Bootcamp 2.1
1) Windows XP Pro SP2c vanilla install (from my Windows XP pro install disk)
2) Update to Windows XP SP3 (I tried with and without BC 2.1: both worked -> BC 2.1 didn't seem to be required for SP3 - maybe because this is a mac pro and not a MB or MBP)
i) ATI drivers installed by default by Boot Camp assistant (BC 2.0) or by BC 2.1
ii) Latest ATI drivers found on ATI web site specifically under Boot Camp / Mac Pro.
Note: Interestingly, the catalyst installer worked ok (provided .NET framework 2.0 is installed though), but it seems that the Radeon BootCamp/Mac Pro driver set itself from ATI's web site does NOT include a driver for the HD 2600 XT - so when I install this driver set, it tells me that no compatible hardware was found...
iii) Latest ATI drivers found under Windows XP (these did include one driver specifically for the Radeon HD 2600 XT)
NOTHING seems to work. I read posts (most of the from late last year) about ATI Catalyst utility showing a 3rd monitor at some point, but I never got any 3rd monitor showing in any of my many many trials with Catalyst. I have yet to get a single image appear on my plasma under Bootcamp Windows. I don't believe its the hardware because everything works great on the max OS X side.
I am actually considering switching to an NVidia 8800 GT just to get the dual screen to work under BootCamp/Windows XP because I really need it and I read everywhere that drivers for NVidia are far better than ATI ones.
Any advice? What should I try next before getting an 8800 ?
Is there a diagnostic utility that I can use to test my config including the GC?
Thanks!

Hi there aside from my laptop I have an iMac 20" with the same HD 2600 XT card. I recently installed the Catalyst 8.6 driver by using a driver mod from driverheaven, I use Vista 32. By installing it this way I got boosted performance and many issues with the bootcamp drivers were fixed. As you may already know the ATI drivers do not install on bootcamped macs usually but the mod tool fixes this. Its unofficial so do so at your own risk but try it out and see if you get the second monitor if not just rollback. Hope this helps and I didn't want to say too much about the 8.6 driver mod because it may not be allowed here but google will provide any answers.

What is better Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Exel

I am working on Macbook pro retina for around 16 hours a day, it is ok but the screen is to small. I am opening about 25 - 30 EXCEL windows, 20 - 25 safari windows at the same time. Excel windows are small, they only show 40 rows and S column Now I am considering buying iMac 5k ( but the screen is only 27", however a very high resolution but I think that fonts and digits displayed may be too small ). I am also considering Mac Mini or Pro with 40" 4K TV ( 4k computer monitors are 27 - 31" , so better idea would be purchasing iMac 5k ) . The problem is that 40 - 42" TV don't have Display Port ( I can't find it anywhere )
Please help me to choose what would suit my needs better. I need large screen to work comfortably with an Excel sheets. What is better? Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Excel ?. The other problem I have is that when I spend 16 hours at work with retina macbook , my eyes are ok. Using the 30'' Dell screen 2560/1440 my eyes are tired after 2 hours.
Thanks for your help on advance
Best regards
David

Currently you can only get 4 K at 30 Hz via HDMI. Some users have reported jerky curser movement because of the 30 Hz.
I would go for the 5K iMac. You can add a second screen at 4K.
FaceTime HD camera
Simultaneously supports full native resolution on the built-in display and up to 3840 by 2160 pixels on an external display
Support for extended desktop and video mirroring modes
The Mac Mini supports:
Support for up to two displays at 2560 by 1600 pixels, both at millions of colors
Thunderbolt digital video output
Native Mini DisplayPort output
DVI output using Mini DisplayPort to DVI Adapter (sold separately)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
HDMI video output
Support for 1080p resolution at up to 60Hz
Support for 3840-by-2160 resolution at 30Hz
Support for 4096-by-2160 resolution at 24Hz
The 2013 Mac Pro can use three and more displays:
Mac Pro (Late 2013): Using multiple displays - Apple Support
I would go for multiple screens

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

Can I get a Dell U2410 Monitor to work with a MacBook Pro?

I rashly bought this monitor. It looks lovely but it has a maximum resolution of 1920 x 1200, which I could not get with the VGA connection, and Dell do not make drivers for the Mac at all. Is there any chance of getting this monitor to work properly with my MacBook Pro? I found the Dell support site extremely difficult to penetrate, so I put the monitor back in its box and am going to sell it if I can't easily find out how to use it.
Any advice is welcome.

C.E.M.Glover wrote:
I rashly bought this monitor. It looks lovely but it has a maximum resolution of 1920 x 1200, which I could not get with the VGA connection, and Dell do not make drivers for the Mac at all. Is there any chance of getting this monitor to work properly with my MacBook Pro? I found the Dell support site extremely difficult to penetrate, so I put the monitor back in its box and am going to sell it if I can't easily find out how to use it.
Any advice is welcome.
I think you are using the wrong adapter. Higher resolutions require the use of a mini display port to DVI or DVI-D Dual link adapter. A VGA adapter will not do the job.
And I assume you are trying "extended" and not "mirrored" mode. What model Macbook Pro do you have?
Message was edited by: BobTheFisherman

What Monitors WILL work with the Mac-Mini?

If the new Mac-Mini does not put out analog video and Apple does not state this, what monitors will work with it?

I was able to get an Apple Studio Display to work via the adapter in the Mac Mini box combined with that huge DVI to ADC adapter they had sold me years ago. In the Apple Store I really had to press them to assure me my display would work as they told me they'd charge me a re-stock fee if I had to bring the Mini back. I pressed the point that Apple should know if a monitor it made works with a computer it made. The rep asked around and we both searched the web and then she was able to confirm it would work. They really need a list of acceptable monitors. If anyone locates such a list, please let us all know!

Mountain Lion 1.8.2 update made my dual monitor stop working on Mac Pro mid 2012

Just done Apple's update for Mac OS X Mountain Lion to 1.8.2 and after rebooting my dual monitor stopped working.
If I go on preferences -> Displays it shows me only one of my two monitors, even if I invert the connections the 2nd monitor doesn't shows up and there seems no way to enable it again.
Any suggestion?
P.S. I already tried to set from "Best for display" to "Scaled", but after rebooting Mountain Lion 1.8.2 reset it to "Best for display"

Ok,
did some extra test here, but first of all my configuration:
Mac Pro (Mid 2012) with ATI Radeon HD 5870 1GB.
2 LCD 24" Wide-screen (1st monitor Hyundai W240D and 2nd Monitor HP w2448hc), both LCD worked perfectly until reboot after installing OS X 1.8.2
After reboot only the 1st monitor wored fine, the 2nd not even listed, so tried to invert cable connections on the 2 miniports on the ATI video card, but nothing changed, still only the 1st monitor working.
Did a second test, disconnected the 1st monitor and connected ONLY the 2nd and now the second works fine.
Tried to connect 2nd monitor on a different miniport, and i still works fine.
Updated my MacBook Pro to 1.8.2 (it as an nVidia card) and connected my 2nd monitor to it and everything works fine, both the laptop LCD and my HP LCD are working fine.
So it looks like Apple screwed up the ATI driver on the latest 1.8.2, now only ONE miniport is active.
To all users with the same Mac Pro configuration: hold to update to Mountain Lion 1.8.2 until Apple fix this driver issue.
More info are on the Console output, so will have to contact Apple on-line support to signal this bug.

Problem with a Dell Monitor - stopped working yesterday, just a flashing orange light. Monitor or Mac Mini issue?

I've been using an old Dell monitor with my Mac Mini ever since I got it, however yesterday evening my monitor stopped working - however I'm not sure whether the issue is with the monitor or the Mac Mini. It just doesn't seem to respond when I try to bring the Mac Mini out of sleep. I can hear that the Mini is responding to the keyboard - I hear the right noise for pressing return on the password box without entering anything.
I've made sure all the cables are plugged in properly (power & connection to the Mini), but all I'm getting is a flashing orange light on the monitor.
I don't have anything else to test the monitor on, nor do I have access to another monitor to plug into the Mac Mini - I only have an old iBook G4, so don't have the right adaptors to plug the VGA from the monitor into that.
So before I run out and buy a new monitor, what is the best way to determine where the problem lies.

Hi, I've actually never had any issues waking this monitor from sleep, this is the first time that it has been unresponsive and I've had it for years - probably over 10! (E151FP) so probably overdue for replacement.
To be honest I'd rather not just switch the Mini off unless it's a last resort given that other than the lack of a picture everything else seems to be working ok - still hearing all the normal noises of Skype, Mail and TimeMachine etc.

Will my 5 year old lg flatron monitor 1730S work with a new mac mini ? thank you.

Will my 5 year old ( hardly used ) LG flatron monitor 1730S work with a new Mac Mini ? Thank You. Robert.

You don't say what sort of Inputs it has available, but if VGA, DVI or HDMI then yes, you might need to buy an adapter of some type though ...

What monitor best works with the MAC Pro

I'm thinking of buying a MAC PRO. What Monitor best works with a MAC Pro?

Whatever Monitor you like, exclusively. There are adapters available for everything.
Analog VGA is not a good idea. It's a Digital world. But it can be done if you want.
A TV set is not a Monitor. TV sets are for moving pictures, and may do badly with stable pictures, fine lines, parallel lines, smooth-edged text, and adjacent patches of bright colors.
Wider than 1920 needs special attention to details.

AirDrop transfer between Mac mini (late 2012) and MacBook Pro (late 2008) works only one way.

AirDrop transfer between Mac mini (late 2012) and MacBook Pro (late 2008) works only one way. I see both machines on both airdrop windows. Firewalls on both machines are set exactly the same way, and with Network Browser set to allow. Can send a file from Mac mini to MacBook, but not the other way. Never get a window asking to accept on the Mac mini.
Found no useful documentation on AirDrop anywhere in the whole support site.

Maybe this will work. From an Apple support article.
You can also use the Share button to send files to your neighbors via AirDrop. In a Finder window, select the item you want to share, and then click the Share button in the toolbar. For more information about the Share button, see this help topic:

Headphones not working in bootcamp macbook pro 13"

i install windows vista business in bootcamp, Macbook pro 13" 2009. The headphone is not working and the speaker is really low. Anyone have the same problem? thank you

Have you installed the Boot Camp drivers in Windows from the Mac OS X Leopard DVD? If not please try that. Also can you increase or decrease the sound in Windows? Which is the sound output device in the Windows?

Mini, Bootcamp, XP Pro, monitor no work

Similar Messages

Maybe you are looking for