Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

Similar Messages

Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

N81 does not retain the correct date...

My N81 got a very strange problem: it does not retain the correct date....
Usually it's wrong by two days ago....!
The S.O. Ver. is: 10.0.32
Thanks you and sorry for my english...! :-)

hi there, have you checked that there is a firmware update for your model? v10 sounds like the original firmware for the N81. i would suggest checking on your PC via Nokia Software Updater for any firmware updates. the latest firmware version for the N81, unbranded or not, is v21.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

The percentage completed UI is not showing the correct data

Hi All,
I have received complaints from one of my larger customers that a very long form we have created is not showing the correct % completed at the bottom. They get to the penultimate page (the last page only have three text boxes on) and it state that only 41% of the form has been completed.
It looks to me like the UI is not updating as the questions are being completed. Rather it waits until you move to the next page.
This is what makes our form look rubbish - you are being told that you have only completed 41% of the form only to move on to the next page and bam, you only have three more boxes to complete.
Can somebody help me out here.
Thanks,
Bill

Hi Bill;
I can take a look at your form but you are right that only the pages are accounted for in the percentage and not the form fields so it can be far off from reality. If there is skip logic in a form that can make it vary more. It is likely that it is working "correctly" (considering how we calculate) in your form but if you send me the link to your form at [email protected] I can see if it is not.
Thanks,
Josh

Nokia N8 Calendar Does not Show the Dates????

Hi,
I am noticing this issue from the past couple of weeks and probably after the last update.
When I open the calendar Icon, the dates do not load on the phone. It just doesnt show any dates?
Also if a reminder is past, it shows a past reminder and the reminder also doesnt open up.
Whenever I do the hard re-boot i.e keep the power button pressed till it vibrates three times and shuts and re-starts, then initially the calendar shows the dates, but again after sometime if I have to open the calendar, it doesnt show the dates at all, and goes back to the same issue.
Please advise a good solutiong to this problem as a hard re-boot or a re-start or even re-setting the factory settings did not work
Thanks

Someone from the Nokia forum please respond to this as I am facing this issue too from quite sometime now. Its exactly he same.

My Airdrop Photos are not showing the correct date when I receive them from my Family.

When I recieve photos via Airdrop or Shared Photo Stream they are not in the correct order in my Camera roll. The Dates are off. What is happening here?

You don't need to delete photos from your camera roll to save on backup sizes, you can turn individual items on and off for back up in your iCloud back up settings.
Apple States that the last 3 back ups are accessible, which means the photos from your back up may not be removed immediately.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

Open file dialog search does not show the correct files

When i use "open file" in the menu of, for example Pages, and then type a word of my desired file name into the search dialog it does not always find the file. Searching in Finder works. And the file is where it is supposed to be.
Does it use different kind of searches? I have "reindexed" spotlight but no avail.
Of course i can look for the file manually and then start pages by double clicking the file...
Any ideas?
thanks wolf

I'm not sure how Pages treats this, but it's possible that from an Open File dialog it may only search either the current directory or the default documents folder. Not sure about this as I'm not a Pages' user.

WBS Summary does not shows the correct Orignial Duration

Hi Friends,
Currently I am using WBS Summary or Level of Effort type of activity on top of my every WBS and I am assigning all my resources to that activity to save the time rather than assigning resources with each and every activity.
But, in my new project I have the activities which has a scattered durations like one activity starts on 3 rd day another starts on 25th day. So, my project is not planned to go smooth or linear. So, if I am counting the total duration for that particular WBS is 25 days but in WBS Summary it shows me 250 days and it is also spreading my resources for 250 days while I am using the resources only for 25 days. Still, the resource usage and costing shows me the same amount.But, I am concern about the resource Usage Assignments which is not correct.
So, I will appreciate any kind of solution with this problem and it will make my life easier.............
Thanks in advance
Edited by: user13349410 on Jul 6, 2010 10:19 AM

Jawad,
i agree the methods you mentioned are good general advice when it comes to sound planning. but they are considerably more time consuming than proper
"who does what" resource assignment to tasks. further more #2 and #3, may need even more manual work to accomodate changes into the project schedule or scope or when dealing with conflicting requirements.
proper resource loading of your schedule is preferable, even using conventional default settings such as:
- linear distribution of effort (units/ costs). no curve or future bucket planning which IMO, depending on required level of detail, can prove to be overkill;
- activity driven resource dates. whenever possible, it is much simpler to "split" activities or better yet create as many as you need in the first place, so that resource allocation start/finish dates coincide with activity start/finish dates for all resources assigned to the activity, rather than having resource lags, non-linear curves or future buckets;
- no artificial constraints on activities, but proper relationships of required type and lag;
- no fixed artificial non-working periods set in activity and/or resource calendars (other than legal/ organisation/ project standards dictate or are so set by technical, workflow, environment or availability reasons that may apply).
especially since calendars are likely to have different requirements, when existing calendars are reused within project and especially in other projects (global calendars).
best regards,
Tibi

Issues logging data - does not save the correct data

I am having 2 issues:
1. I am having issues with my logging occuring at the right time.
I have a few things occuring based on the state of 'Injection'. In the case of logging, the following needs to happen:
When injection is 'True' nothing should occur. When injection goes 'False', data logging should occur. If my injections are 'continuous' the boolean goes:
True, False, True, False. I would have 2 logging sessions during both 'False' occurrences. What appears to be happening is that the logging occurs during the 'True' state. I am not sure why.
2. The logging needs to save a certain amount of samples to the text file. If my 'False' state lasts for 1 second, I need to have 1000 samples. If 2seconds, 2000 seconds, if 1.5seconds, 1500 samples..you get the idea. At current I am only getting 100 samples at a time, at dt of .1
Code below:

belopsky wrote:
Thanks Dennis.
i seem to have issues w my UI updating when I specifiy samples to read. It appears to lag, which is OK, as long as the timing is still correct..
Can I acquire continuously, without specifing how many samples, but specify how many samples to read?
DAQmx Read will return the number of samples requested immediatly if they are available otherwise it will wait for the number of samples requested to be avilable and return the number of samples requested. This of course, means that the loop will only iterate no faster than "number of samples * Sample rate". (probably what you mistook for "Lag") IF the number of samples requested is not available before the timeout period DAQmx Read will return with the number of samples available and a timeout in the error cluster so your calling code can handle the exception intelegently. If the number of samples requested is -1 DAQmx Read returns the number of samples available now without waiting at all.
Clear?
Jeff

My calendar does not show the public holidays in 2013 or after.

I've already enabled the hotmail's public holiday in iPad calendar. However, it shows only this year, 2012 or before, but not 2013 or after. Anyone can help? Many thanks.

http://support.apple.com/kb/ht5209
http://support.apple.com/kb/ht4437
http://support.apple.com/kb/TS4215
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-Airplay-Icon-Missing. htm
 Cheers, Tom

IPhone not showing the correct date on emails

I have done a search through this forum and haven't come across this problem so I thought I'd flag it as one of you may know a fix.
When emails are downloaded to my iPhone the date it displays is always one or even two days out. E.G. I downloaded emails today (Monday) and the date showing is Saturday, even though the emails were definitely sent to me today.
Any ideas?

What type of email?

The central syslog is not showing the correct date

Time     SAP instance    Type Nr Clt User         TCode           Priority Grp N Text
95:52:83 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:52:83 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:52:93 ceas4359_DBP_04 BTC 007 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:52:93 ceas4359_DBP_04 BTC 007 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:57 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:59 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:59 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:60 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:71 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:71 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:79 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:86 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:86 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
Please suggest , the needful !
Database system - oracle
Release - 10.2.0.2.0
Component version - SAP ECC 6.0

Only creative cloud subscribers get the new features. If you were a Cloud subscriber your version would be 16.4.0 not 16.0.4.

LOV does not show newly added data in the same session

Hi guys,
I work with JDeveloper 11g Release 2. We use Oracle ADF to develop our web app.
In a page we have a LOV (say the page name is "a"). The related data for that LOV is inserted to the db in another page ( say the page name is "b").
When new data is added in the page "b" and goes directly to the page "a" the LOV does not show newly added data. But if the user log out and log in again
LOV shows newly added data correctly.
Is there a way to show the newly added data in the same session without logging out? Please help.
Regards !
Sameera.

Add the following method in your ViewRowImpl base class:
public void refreshLOVAccessorQueries() {
    List lovs = getViewDef().getListBindingDefs();
     if (lovs != null) {
         for (Object obj : lovs) {
            getListBindingRSI((ListBindingDef)obj).getRowSet().executeQuery();
             ListBindingDef lbd = (ListBindingDef)obj;
Export that method to the Row Client interface, add him to the pageDef, and invoke in the executables section of the pageDef:
    <executables>
<invokeAction Binds="refreshLOVAccessorQueries" id="callRefreshLOVs"
RefreshCondition="#{!requestContext.postback and empty bindings.exceptionList}"/>
   </executables>

Ios 7 calendar does not show events 2 years in the future

Why does ios 7 calendar does not show events 2 years in the future?
I've entered the events more than twice and it all shows up in the OSX calendar but not on my iphone.

Just tested it works even 3 years ahead.
Tap Calendars (bottom, middle) is All iCloud selected (tick mark)?

TS1702 The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, they post exactly 4 hours earlier than the correct time on my Yahoo Calendar. Does anyone have a "fix" to correct the "time

The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, items post exactly 4 hours earlier than the correct time on my Yahoo Calendar. My i4S is in the correct New York time zone. Help?

I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work. So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.

Mini Calendar does not show the correct date

Similar Messages

Maybe you are looking for