Mini Causes Computer Problems

I have been having problems with my Ipod Mini for awhile now, and now I cannot even hook it up to the computer. Whenever I hook my Mini up to my computer it says that my ipod needs to be restored. However, I cannot restore it because whenever my Ipod hooks up to my computer (USB) it causes my Wireless Network Adapter to stop working and I lose my connection to the internet. But as soon as I disconnect my Ipod from the computer the network adapter works fine again. I use a Linksys Network Adapter and it is connected by a USB cable. Anybody have any idea what is going on? Thanks

hmmmm. are you connecting either the ipod or the Network Adapter to the same hub? if so, try attaching them directly to the PC, or unplug other USB devices currently attached to the PC while you have both of them attached. alternately, try attaching each device to ports at the back of the PC rather than the front.
(sometimes, power drain through one USB port can affect a USB connection on a different port. so these techniques are intended to try to minimise the possibility of that happening, or maximise the possibility of striking a combination of ports with adequate concurrent power supply.)

Similar Messages

  • Instant Alpha in iPages on Mini causing computer to freeze. Help?

    I just bought a brand new Mini, hoping to aleviate the former problem I was having with my old Mini - and its STILL happening! Why is Instant Alpha causing the whole computer to hang/freeze? How can I fix this? Any help much appreciated.

    Hi.
    That song file is mostly damaged or corrupted. You should check the Console (in Applications/Utilities) it may provide some more info about the incident. If you imported it from a CD, you could try deleting and re-importing it.
    Good Luck.

  • IPod Classic not recognized by iTunes, claims to be wiped of all content, and causes computer problems when connected

    I have an 80 GB iPod Classic that has suddenly developed severe problems. I'm running iTunes on Windows 7 64 bit.
    It was working fine until last night, when I connected it to iTunes to add 6 songs. (Four of these were bought on Amazon.com and 2 ripped from CD's). It accepted the songs and played them fine when connected. When I clicked the icon in iTunes to eject the iPod, it came up with the "OK to Disconnect" and progress bar as usual. However, this time the progress bar didn't start to fill in. It just sat there.
    After several minutes the progress bar finally filled in and returned to the menu... but instead of displaying the cover flow on the right side as usual, it showed a gray box with "No Music."
    When I tried to re-connect it to my computer, iTunes would not recognize it. My computer also wouldn't recognize it at first... after several minutes, it came up as a generic removable device. Attempting to right-click on it or eject it from Windows was unsuccessful.
    The iPod itself displayed "Connected" and alternated the plug image with the spinning arrows. It never said "Synchronizing" as it usually does.
    Furthermore, my computer's performance degraded severely while the iPod was plugged in. iTunes itself froze, and even my other applications (such as my web browser) would not work correctly. This all cleared up as soon as I unplugged the iPod. If I tried to initialize iTunes while the iPod was plugged in, it would not open. It opened immediately when I unplugged the iPod.
    Finally, despite claiming to have no music or other contents (it had contained only my iTunes music library, which is about 26.5 GB), in Settings the iPod claimed to have only 5.3 GB of free space.
    Resetting the iPod with Select/Menu made no change. I was able to put it in diagnostic mode and check the hard drive, which gave these results:
    Retracts: 381
    Reallocs: 0
    Pending Sectors: 10
    PowerOn Hours: 417
    Smart/Stops: 381
    Temp: Current 24c
    Temp: Min 15c
    Temp: Max 48c
    When I put the iPod up to my ear I hear a steady, faint high-pitched sound and an occasional very faint crackling noise. When it shuts down the sound continues for a few seconds, then ends with a kind of squeaking sound.
    The iPod is more than 5 years old, so I'm prepared for the probability that it's fried. But I'd like to try everything before I go ahead and spring for a new one.

    The iPod's hard drive probably has data corruption.  That does not necessarily mean there is a hardware problem.  Hard drives, including the ones in computers, can develop data corruption.
    Try putting the iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    If it goes into Disk Mode, run iTunes on the computer and connect the iPod.  To eliminate other potential issues, you should disconnect other USB devices (you can leave standard keyboard/mouse connected), and connect the iPod to a direct USB port on the computer.
    iTunes may prompt you to do a Restore, which you should do.  This will erase the iPod, re-install its software, and set it to default settings.  If the problem was only data corruption, and there is no hardware problems, the iPod should have a "fresh start."  You can sync it from your iTunes library.
    If the iPod does not go into Disk Mode, or if doing a Restore fails, the iPod's hard drive may be faulty.

  • The new firefox twitter app is great - except it disappears every time I shut down the computer and I have to remove and then reinstall it every day!?? I am working on an iMac - if that is causing the problem ...? Thanks.

    The new firefox twitter app (mini tab on left of page) is great - except it disappears every time I shut down the computer and I have to remove and then reinstall it every day!?? It won't appear on the page until I do. I am working on an iMac - if that is causing the problem ...? Thanks.

    Eustace, thank you so much for writing back.  I will try what you suggested!!
    thx for your reply - apparently when I went to the Apple store a long time ago, they restore maybe photos and itunes etc from my external hard drive (passport).  I guess at that time they reinstalled an earlier operating system than my macbook came with and that somehow corrupted FileVault.  apparently there was no sparse bundle (whatever that is) for my old admin account and they said that ever since the install of the older OS that it was actually NEVER backing up anything in my admin account.
    Then, I bought Time Capsule and starting backing up to that instead.  I started having problems with it being slow etc and then StartUp Disk full errors and didn't know what to do, so I "Restored" from Time Capsule and that's when I lost everything in my Admin account and was locked out when I tried to log in - it said File Vault error ..."
    anyway - that's THAT sad story.  I was told to create a new admin account and I've basically been trying to start over - even though I have a partial save of my computer in Crash Plan and I DO see a sparse bundle listed in there, but I just don't know enough about computers to know if it's something I can get back or if I am just totally doomed. 
    I'm afraid to reinstall anything because if there is even a remote shot that the other files are still floating around in my computer, I feel like that chance will be shot forever.  I need to hire McGee from NCIS, I just KNOW he could get those files back for me!!!

  • My iPod touch isn't being recognized by my pc. The lock button on it won't work due to water damage, and a friend of mine fixed the problem by restoring it on his computer. How do I restore it without the lock button?

    My iPod touch isn't being recognized by my pc. The lock button on it won't work due to water damage, and a friend of mine fixed the problem by restoring it on his computer. How do I restore it without the lock button?

    first try:
    iOS: Device not recognized in iTunes for Windows
    next
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • The upgrade to Firefox 4 is causing massive problems with my computer. How do I uninstall it and go back to using the previous version?

    Firefox 4 is absolutely awful - it is causing massive problems with my computer. How do I uninstall Firefox 4 and go back to the previous version of Firefox?

    According to the instructions given on the Norton Community forum under "Other Norton Products/Comcast-Customers - Norton Toolbar Problem in Firefox 10", I have done everything necessary. And I do have a Norton toolbar (Safe Web and Identity Safe) when I open Firefox 10. As was mentioned in the previous posts here, you need to run manual LiveUpdate then reboot until you have version 5.2.0.13. Then reboot and run manual LiveUpdate again and reboot once more. One thing that I noticed is that Norton never told me that it had updated the patch for Firefox 10, so I didn't know. I guess if you have the toolbar when you run Firefox 10, then you have done it all.

  • I don't know what I downloaded that caused the problem, but now when I try to make a new folder on the desktop of my new Windows 7 computer, I have only the fol

    I don't know what I downloaded that caused the problem, but now when I try to make a new folder on the desktop of my new Windows 7 computer, I have only the following choices: Shortcut, Bitmap Image, Contact, Microsoft Word Document, Journal Document, Microsoft Powerpoint Presentation, Text Document, Microsoft Excel Worksheet, and Briefcase. No new folder choice. Anyone have any ideas how I can correct the problem?

    This support forum is for Firefox related issues. The volunteers on this forum can only help with Firefox issues.
    Please consider contacting another support service like [http://www.ask.com/answers/browse?o=0&l=dir&qsrc=321 Ask.com].
    Sorry.

  • Computer fails to boot up after password change. After new password keyed in, computer also asked for old password. But even when old password supplied, computer just freezes and fails to boot up. What is causing the problem and how can one solve it?

    Changed password on MacBook Pro recently. But after password change. Computer ask for old password, thereafter. Even when correctly supplying the old password. Computer system does not boot up and just freezes. What is causing the problem and how can one resolve the issue?

    OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
    Reset Password
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse pointer to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box under “Select user account”.
    Enter a new password.
    Reenter the new password for the user.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.

  • My computer, running on Lion, randomly flashes with crazy lights and colors. Doesn't happen often, but when it does it's totally random. What causes this problem and how can I solve it?

    My MacBook Pro, running on Lion, randomly flashes with crazy lights and colors. Doesn't happen often, but when it does it's totally random. It looks like the Northern LIghts!!!
    What causes this problem and how can I solve it?

    Really? Oh I get it. You're the kind of person who goes on tech message boards to make jokes - or friends.
    Well, I'm trying to solve this problem - which is a rather annoying way to spend a Saturday.
    SO either help or don't reply.

  • Mac mini audio output problems

    This is similar to a problem that appeared before, but with a different twist.
    On 4 July all was well. On 5 July I switched on and there was no "chord" from the Mac. When I collected my mail - no sound from my speakers (which are part of my screen). Logged on to a couple of sites - no sound.
    The System Profiler, under the "Audio (Built In)" category, says: "No Built-in Audio." I know that's wrong because it's always worked before and when I plug my headset in it works fine.
    When I go to the Sound preferences panel in System Preferences, it finds the headset but if I unplug that it finds nothing.
    I tried running the hardware test (by putting in the OS X install disc and holding D during startup.) It couldn't find a problem.
    So, as far as I can see, audio output is fine for the USB headset output but not for the others. Is there a simple fix? The nearest Apple store is about 200 miles away and I don't fancy the idea of posting the Mac off.
    (And I think it's still under warranty for a couple more weeks.)
    Mac mini   Mac OS X (10.4.10)  

    hello mini users with the "no audio output" problem
    it seems that there are faulty output jacks in the macbook and the mac mini
    there are two things you can try:
    i tried everything and began thinking about what new software i had installed. it was "macam" which enables you to use older webcams on OSX. i needed that to use my webcam on skype.
    macam installs a file called "macam.component"
    if you have the same, do this - take that file out of:
    (your hard drive)/library/quicktime - macam.component
    and just put it on your desktop
    restart, then in your sound pref's choose your audio output (if doesn't work restart again)
    the first time i took it out, i had my sound back instantly, another time i had to choose audio output in sound prefs. you kind of have to try different things. after you get your sound back, you can put back "macam.component" to use your webcam.
    it seems macam causes the problem, the two can not work at the same time.
    the second thing: if you dont have "maccam" try plugging and unplugging output jack a few times and restarting until you have sound.
    the problem still could be with the OSX 10.4.10 update / quicktime...or maybe even a hardware problem like others with macbooks were saying (with the red light), not sure.
    people with macbooks and who have the red light on, say to use a paperclip to turn off the switch inside.
    my mini does not have a red light on. i tried using a paperclip but it doesnt work.
    hope this helps, beleive me i feel your pain!!!!
    what good is a computer without sound?
    extremely annoying problem that i hope apple looks into and fixes
    -andrew

  • Loading software will cause computer to crash

    I had a 15GB iPod, but the hard-drive broke. I recently got an iPod mini and when I try to update the software that came with it, a message comes up on my computer saying that it hasn't been checked by Windows, and to talk to Microsoft. I'm using Windows XP. I'm afraid to continue the installation after reading all these posts about updaters causing havoc on computers and iPods. What should I do? Am I being paranoid?

    i have the plug in power outlet icon on my mini. is there anyway that i can get rid of that instead of getting a power outlet charger cuz i dont have one. and if there is no other way
    You should start your own thread. Your problems have nothing to do with "Loading software will cause computer to crash".
    how much is a mini power outlet (not usb) charger
    You are two whole mouse clicks from looking it up yourself.

  • Flash player causes real problems on Youtube

    Flash player causes real problems on Youtube site.
    I don't really know if it's a Flash Player problem or a Youtube one but Youtube used to work fine back in like 3-4 months ago, now it doesn't anymore.
    The issues I encounter with Flash player on Youtube are as follows:
    First issue is the fact that after the video completely loads or it loads a big part of it then I click on the seek bar to jump at a specific time that has been already downloaded by the Flash player the video starts loading again from that point on like it didn't actually downloaded that part before. This issue causes big bandwith use since it downloads many many times the same portions of the clip that it has already loaded before dozens of time. If I play a 3 min music clip and click replay or point on the seek bar at the begining of the clip to play it again it loads/downloads the clip again and again and again. If the video clip has over 1 hour then I click play it might entirely load into the player in a few minutes then I click on the seek bar to skip at a certain point it starts loading again from that point on. This is the most anoying thing I encounter with Youtube lately.
    Second issue is the fact that if I click on the seek bar of the player to skip to a specific time most of the time the playback does not start from that point on but it skips back to the last point where it was so I must click several times or keep the mouse button pressed for a long time on the same point in order to play from that place on. This one is again very anoying.
    Third issue is that after the video starts playing in 360p it automatically changes to 720p after a minute or so even if I had checked this setting "I have a slow connection. Never play higher-quality video" in Youtube Playback Settings. I cleared the cookies and chosed several times the same "I have a slow connection. Never play higher-quality video" setting in Youtube Playback Settings but it just doesn't keep the settings on. This one is again very anoying since my computer can't handle well 720p.
    I have reinstalled Win XP SP3 and even installed Win 7 SP1 tried several versions of Flash Player and several versions of Firefox, Chrome and Opera but the same issues occur everytime.
    I haven't encounter any of these issues before like 3-4 months ago.

    I have had problems trying to watch videos on youtube for the past couple of years. It's been almost unbearable, even if I set the resolution to 144kb! Then a few days ago, I went to youtube and couldn't watch at all. There was an error showing that my Flashplayer was out of date, and then a link to Firefox to get the right update. I did that two times to no avail. I had just installed the newest version of Flash Player as of November 2014, yet this error kept popping up. Finally, out of utter frustration, I did like you did, and uninstalled everything related to Adobe Flash. Then I went to youtube, just to see how bad the result would be, and suddenly videos started playing smoother, at higher resolution, and with faster buffering to start out.  Sure, there are some videos that I can't play, and the newest iTunes seemed to have issues without having Flash, but videos aren't frustrating me like they had been on youtube.
    So, yeah, I know what you're saying. I had the same solution work for me. Cheers.

  • Firefox 5.0 is supposed to have a separaret Twitter tab, but I noticed today that that tab is missing. What is causing this problem?

    Firefox version 5.0 has a separate Twitter tab built into this web browser. However, today I have been having problems with launching the Firefox browser. An error message appears, after attempting to launch the browser, which states that the Firefox browser is already running, and that the process needs to be closed or that the computer needs to be restarted. After restarting my computer and launching the Firefox browser, I noticed that the built-in Twitter tab ( near the upper left-hand corner of the browser ) was missing. What is causing these problems?

    I'm pretty sure that Firefox version 5.0 has a built-in Twitter tab. Whatever the case may be, I downloaded Firefox version 5.0.1 this morning. I learned that if you right-click on a tab, that a menu box will appear on the screen. One of the options in that menu box is "Pin as App Tab." If I go to the http://twitter.com web site, and then right-click on the corresponding Twitter tab, and then select "Pin as App Tab," then a small Twitter tab will appear to the right of the orange-and-white "Firefox" tab ( in the upper left-hand corner of the Firefox web browser screen ). Then I can click on that Twitter tab and go directly to the http://twitter.com web site. However, when I exit the Firefox version 5.0.1 web browser, and then immediately re-launch it, the separate Twitter tab is gone. Is there any way, within Firefox version 5.0.1, that I can make the separate Twitter tab permanent after selecting "Pin as App Tab"? Thank you for your assistance regarding this matter.
    ''Edited by a moderator due to inappropriate content.''

  • I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    BUMP
    Yes, I just get that message. I don't see how I could investigate this problem.
    I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
    In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
    Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
    Can anybody help me?

  • What is causing this problem and what are you doing to fix it? Should I just go back to Internet Explorer?

    Every single day, Firefox crashes and sometimes in the most inopertune time. This is very frustrating as some of the times I can not go back in and correct what I was not able to do due to your site crashing. What is causing this problem and what are you doing to fix it? Should I just go back to Internet Explorer?

    First, you must use a specific [[Managing profiles|profile]] for Firefox 4.0 Beta and keep your current one for Firefox 3.6 to prevent interferences between the two versions.
    For your problem:
    # [[Troubleshooting extensions and themes]] could be a cause.
    # If not 1. and if it does not happen in [[Safe Mode]], you must disable HW acceleration in Options > Advanced > General. If it solves your issue, your graphic driver is out-of-date and must be updated. Go to your computer manufacturer support site.

Maybe you are looking for

  • Purchase order sample - drop down list populating another drop down list

    hello, when i use this sample script, it works fine. but when i add additional arrays to it, it doesn't work at all. please let me know what i need to change in this script in order to add additional items into the drop down lists. here is the script

  • After I updated my OS to Lion, I can't open iTune!

    after I updated my OS to Lion, I can't open iTune! why? I already delete the iTunehelper , but still doesn't work!! please help me!

  • Drilldown display

    Hi, we are using Crystal Reports 2008 and I have a question regarding drilldown: when I activate this function Crystal opens a new window/tab and displays the results there. However, I would like to display the drilldown data in the same window (like

  • User registration errors

    Hello. I am studying Webcenter Portal 11.1.1.8. Now I am trying to make a self-registration on my portal. I've configured connection to soa and ucm, so that they are shown in Enterprise Manager in Webcenter-Portal-Spaces-Settings-Service Configuratio

  • Rotation X-Axis

    Hey there, I try to rotate a picture in the X-Axis and not the Z-Axis. Does anyone know, how I can solve this in FCP ? Thanks for answering