Mini crashes when another mac wants to access it

Recently, our mini crashes every time another mac tries to access it or its attached printer. There are no other problems and if the mini is used to access the other Macs all is fine. It has worked fine for over 2 years.
Anyone know what's wrong?

Didi you replace any ram? How many beeps do you get? It can beep up to five times in a row and the pause and start over. Check this atticle.http://www.welovemacs.com/whdoallthbme.html

Similar Messages

  • Microsoft Office X apps crash when using Mac OS X v 10.6.7

    Microsoft Office X apps crash when using Mac OS X v 10.6.7

    I think Office X has been obsolete for some time, but you might want to ask in the MS forums too:
    http://www.officeformac.com/ProductForums/

  • Planning Layout crashes when another excel is open

    Hi All,
    The planning layout crashes when another excel sheet is open other than BPS layout. It gives me following type of error:
    In the initialization phase of the planning function you selected, the system found settings, which could possibly lead to problems and which are not immediately obvious. For example, it could be that the current selection conditions do not match the settings of a data slice.
    Have anybody encountered this type of error before? Please reply ASAP as this is very critical issue being faced by the users.

    We follow up this issue with SAP and we got following reply from them:
    it is a general problem from Excel, to be unable to work properly in
    2 or more instances in parallel. The problem was already discussed with
    Microsoft - the result was that there exist no solution for that. The
    problem is a restriction due to the OLE functionality from Microsoft.
    More information about you can find in note 176642.
    My suggestions:
    - Do not use Excel if you are using TA BPS0.
    - Could you change the layout from Excel to ALV-Grid?
    - It is possible to use Office Web Component (OWC)?
    - Create a web interface based application using OWC in BPS_WB.
    - see note 632333
    Unfortunately I am not able to give you more support in this case - we
    have no influence on the Excel Instance - it is an Microsoft issue.

  • Opera mini crashes when scrolling

    ANYONE ELSE HAVE AN ISSUE WITH OPERA MINI CRASHING WHEN SCROLLING? ANY FIX SUGGESTIONS? SEESM TO EFFECT THE 5800 TO.
    CesarCesar
    LOVE my 5700 ExpressMusic, HATED my N97, Salivating for a N900
    Like my post? Kudo me Please!

    The only Opera Mini crash that I've seen was one that reported an "Out of Memory" error just before it exited. 
    I had left the Web Browser open (used it to find and load Opera Mini) and had forgotten to close it.
    Since then I've had no problems with it, but then I mainly use it for RSS feeds as it is friendlier than the Web Browser's RSS feed reader.

  • My iPad mini crashes when editing mail.

    IPad mini crashes when editing mail  happens when trying to delete multiple emails. Any suggestions。

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
     Cheers, Tom

  • Quick reply crashes when another message comes in

    Quick reply crashes when another message comes in

    Hello Mikeyis009,
    Thanks for using Apple Support Communities.
    To start troubleshooting this issue, please go ahead and first force close all of the apps currently running on the device, and then reset it by following the steps in the articles below.
    iOS: Force an app to close
    Turn your iOS device off and on (restart) and reset
    Take care,
    Alex H.

  • IE 6 Crashes When Oracle E-Business Suite Access JInitiator 1.3.1.28

    Question Moved to Appropriate Forum
    IE 6 Crashes When Oracle E-Business Suite Access JInitiator 1.3.1.28
    Edited by: user10823806 on Jan 19, 2009 10:51 AM
    Edited by: user10823806 on Jan 19, 2009 10:54 AM

    Hi,
    Welcome to Oracle Forums World
    You would post the E-business related queries in the E-business forum
    General EBS Discussion
    Regards

  • Mac Mini crashes when HDMI-connected AV receiver powered off

    This issue concerns a Mac Mini, mid 2011, running Yosemite. It is connected to a Yamaha AV receiver using HDMI and under normal circumstances works normally. However, whenever I power off the AV receiver, the Mac Mini crashes (spontaneously restarts).
    I can't find any trace of a kernel panic, and there is no message after startup to say that the system has restarted unexpectedly.
    For example, the system log from last night shows that is was performing a backup, and then there's the boot message at the time I shut the AV receiver down:
    1/24/15 10:18:29.000 PM kernel[0]: hfs: mounted Recovery HD on device disk0s3
    1/24/15 10:18:29.810 PM mds[32]: (Volume.Normal:2464) volume:0x7f8775141000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
    1/24/15 10:18:29.854 PM fseventsd[20]: Logging disabled completely for device:1: /Volumes/Recovery HD
    1/24/15 10:18:29.000 PM kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
    1/24/15 10:18:29.982 PM com.apple.backupd[5261]: Starting post-backup thinning
    1/24/15 10:19:17.000 PM bootlog[0]: BOOT_TIME 1422130757 0
    1/24/15 10:19:19.000 PM syslogd[16]: Configuration Notice:
    ASL Module "com.apple.AccountPolicyHelper" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    1/24/15 10:19:19.000 PM syslogd[16]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/asl" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    I have swapped out the HDMI cable in case it is faulty, but this has not changed anything. This issue is easily reproducible but I haven't been able to find any possible solutions. It started after the Yosemite upgrade. Also, the AV receiver need not be displaying the Mac Mini video for this to occur. It will crash regardless of what channel the receiver is showing.
    Any help would be much appreciated!

    I have a similar issue after recently buying a receiver (Sony STR-DN1050) and wiring my mac mini through it.
    Some observations that seems to be linked.
    1. When I power up the receiver with another hdmi input than the mac mini, the mac mini switches fast between displays, from the TV name to unknown (observed through Remote Desktop), and sometimes log out the user.
    2. Then, when switching to the mac mini hdmi input, everything works fine, as the mac will recognise the TV.
    3. When switching off the receiver, the remote desktop disconnects and usually the mac mini will log off user or restart- not sure which.
    Edit: Right now, when I powered off the receiver, the mac stayed on... no idea why, as it usually disconnects as mentioned above.
    Edit2: As I look in the Display settings, the mac now recognizes my receiver as Display when it is turned off, presumably because I turned off HDMI pass-through on the receiver settings.
    However, I still have problem 1 above: When I turn on the receiver with any other input than the Mac Mini, the mac will start switching displays and log out the user.

  • Mac mini crashes when switching users without a display

    Hello, i have this Problem on my Mac mini 5.3 with 10.6.8. I connect to the mac over vnc and when i want to switch the user the mac freeze. I got the Problem only when the Mac Mini hasnt got a display pluged in. When a Display is plugged in i can switch users over vnc. Can somebody help me??
    Best regards

    Our 1 year old mini also crashed trying to watch a tv show from the internet - after about 5 minutes of the show it started automatically rebooting over and over again (10 + times). Now I can't get it to start up at all. We use this with our HDTV as an entertainment machine

  • Mac Mini crashes when exporting imovie projects

    Hi.
    When I try to export imovie projects, my Mac Mini crashes. Not ever, just every two or three times.
    My system is 10.6.7 and imovie is 11. Can anyone help me? Thanks, I apologize for my bad English

    Thank you, I'll try!
    I hope you're right, because is boring to see out of the blue all the screen getting grey and the window that invites you to reboot, without hope... It happens, for example, after two or three succesful exporting projects, then I reboot and go on for another two or three projects and then again... I'm afraid it's a RAM problem, but I'll try to update system and software.
    Thank you again

  • Mac Mini crashes when I attempt to boot to OS Disc

    Can't reinstall/reformat.  System crashes when I try to reboot with the OS disc in.  Before that, when i started the computer, the pinwheel kept spinning and I had to boot in safe mode and run Disk repair.  Then it booted fine.  But my iMovie project keeps losing the sounds I put in and unable to control the volume of some sounds i put into the movie project.    Could this be my hard drive is dying?

    Hi Clifford,
    Just asking, is the OSX Install Disc the exact one that came with that Mac?
    Not that you'd want to use it if your on 10.8.5 though!
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • Mac mini crashing when booting up

    Hi, does anyone know why the mac mini crashes at bootup. it gets teh strart up ping, then the loading screen, then the harddrive turns off. any ideas why this is happening

    I had a similar problem recently, my mini froze during a backup, held the power button down left it for a few mins and rebooted, only got the grey screen with apple logo and the spinning gear and that was it, could not get past that so I installed OS X on an external drive, the internal HDD took upto 10 mins to mount then vanished copletely a day or so later, in the mean time the optical drive stopped working as well!!, took it to the Apple store who thought it ws a dodgy interconnect board, but they called yesterday to say that both the hard drive and optical have conked out, and that the machine was packed full of dust, and possibly caused everything to overheat!! (am allergic to dust so keep my flat quite clean!!), to replace both costs about the same as a new machine so not worth it!. So off to collect it today and buy a new one. Have had the machine barely 2 years! and thought it would outlive my Dell PC!

  • Blue Screen Crash when iTunes version 9.2 accesses iTunes store

    I have posted on a previous issue regardng blue screen crash when upgrading to iTunes v9.2 but have done a few other things to try to locate the problem.
    Firstly, as this is a shared computer I used a colleagues login details to login into their desktop. Then opened iTunes from there. It opened perfectly normally and found and played music stored on the computer. However, as I had noticed that iTunes was crashing when I was logged in as it was trying to access the iTunes store I then tried to accesss the iTunes store from within iTunes on my colleagues desktop. Hey presto, blue screen crash with the following error:
    * STOP: 0x0000007E (0x0000005, 0xBF271800, 0xA811350c, 0xA8113208)
    * ati3duag.dll - Address BF271800 base at BF16B000, Datestamp 46eb3954
    I then restarted my computer, unplugged it from the network and started iTunes in my desktop. It started normally with no problems. I even synchronised my iPhone without any problems to my music and Outlook (Calendar & Contacts).
    I removed my iPhone, then tried to access the iTunes music store and guess what it went half way through the process and gave the Blue Screen error again.
    Just for completeness sake I did the same thing using my colleagues desktop iTunes access and iTunes did the same thing again (without synching my phone obviously) and when trying to access the store it gets half way through, hangs and then it crashes.
    Any ideas???

    ati3duag.dll
    You're having trouble with the drivers for your ATI Radeon video card or display adapter, lord.
    If you've got a name brand PC and the video card or display adaptor came installed with the PC, head to the drivers and downloads page for your particular model of PC at the PC manufacturers website and try updating your video driver or display adaptor driver.
    If the PC is custom/home-built, or you've added the Radeon to the system yourself, head to the AMD support website (AMD now owns ATI) and look for updated drivers for your particular model of video card or display adaptor.
    If you're already up to date on your drivers, or updating didn't help with the BSOD, try heading into your Device manager and reinstalling your video drivers or Display adaptor drivers.
    Do any of those measures give you any relief?

  • Flash 8 crashes when publishing (Mac 10.3.9)

    I've searched the forums and haven't found an instance that
    is relevant enough to my situation.
    Pretty basic, really. I have a registered version of Flash
    and I go to publish. Not doing anything crazy with the publish
    settings. The document I'm working on isn't immense or overly
    complex, either.
    It gets about 1/3 or 1/2 through publishing it, then crashes
    (i.e., "The application Flash has unexpectedly quit.").
    This is part of the message that my OS sends to Apple...
    "Exception: EXC_BAD_ACCESS (0x0001)
    Codes: KERN_INVALID_ADDRESS (0x0001) at 0x0e8e8d9e"
    What's all that about?
    From what I've read, Flash is a bit buggy (hit & miss)
    with this whole crashing thing.
    Anybody have any links or idears on how to get this fixed (or
    at least working better/more reliably)?
    I've repaired permissions, run Onyx (i.e., deleted system
    cache, etc. etc.), restarted, updated, repaired permissions,
    restarted. . .
    In a pickle...
    Can some kind soul help me out? I hate pickles...
    Thanks,
    -j

    Well, I talked to Adobe support last night for about an hour
    and this is the scoop. Evidently, I was only having problems with
    one of my documents. I was able to successfully publish a different
    document. I was also able to save it, too. This document, however,
    was much simpler than the one I was having problems with.
    In my troublesome document, I had imported some .swf
    animations that I had exported from ImageReady. I didn't realize
    that Flash creates a .swf library symbol,
    and two library instances of
    each frame (a bitmap and a movieclip symbol).
    I realized that I had many, many duplicates and duplicates of
    duplicates. My document had become ridiculously huge (~227MB). I
    deleted all those instances, re-imported the .swf file and got my
    file size down to about 77MB. I was now able to save my document,
    but I still couldn't publish it.
    So, the support guy told me to go into "Publish Settings",
    click on the "Formats" tab and deselect "HTML". Click the publish
    button at the bottom of the dialogue window and presto! It
    published (albeit without the HTML file).
    That's about where it ended. The support guy couldn't figure
    out why this document was crashing Flash when trying to publish
    both the .swf
    and .html files. He recommended a work-around of creating
    the HTML file in Dreamweaver. I had already been hand-coding the
    html file as a work-around, so that's where we left it.
    So, this is what I learned:
    1. Repair permissions, run Onyx & clear your system cache
    (don't have Onyx for 10.3.x? You can download the
    zip
    file. You need admin access. Be careful with it, you can screw
    up your computer. Be conservative with the settings. Use at your
    own risk).
    if this doesn't solve it, then:
    2. Make sure you're up-to-date on your system software, Flash
    software, and Flash player. Repair permissions again after updating
    any software.
    if this doesn't solve it, then:
    3. Go to Users > username > Library > Application
    Support > Macromedia and rename the Flash 8 folder as "Flash 8
    old". Flash will create a new folder when you load it (it's an app
    preference folder). You may delete "Flash 8 old" if this solution
    doesn't end up really screwing things up (or you can delete it if
    it fixes your problem). If this solution does end up creating
    problems (or if you had certain settings you just can't lose),
    delete the new "Flash 8" folder and rename "Flash 8 old" to "Flash
    8".
    If it still doesn't work, re-evaluate your .fla:
    4. Limit the size and complexity of your .fla (delete
    superfuous library instances)
    5. Library instances can become corrupt, leading to a crash
    (delete suspect ones, re-create them)
    6. Fonts can become corrupt, leading to a crash (validate
    your fonts)
    7. Importing .swf files into your .fla file is iffy, due to
    different compression(?) settings. This could be the culprit in my
    circumstance. I may try doing a loadmovie deal on it at some
    point... when I figure out where/when it could be loaded in the
    background.
    7. Publish your .fla without the .html document.
    If all else fails and your Flash app just ain't workin', here
    are instructions for uninstalling the studio (and it appears,
    individual applications):
    Studio TechNote
    8f101099
    Hope this helps!
    Keywords: Flash crashes when I try to publish crash crashes
    crashing keeps crashing keep crashing Flash crashes on publish
    Flash stalls-out when saving stalled stalling

  • Why does Firefox crash when ever I want to print an email or something from the web?

    If you choose print on the browser it will go to this dialog box where you click print and after clicking the browser will crash and another box will appear stating that it crash and wants to know if you would like to submit a report.

    Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
    Please submit the crash report and provide the crash id -> https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

Maybe you are looking for