Mini display 3rd party adapters

Anyone have any idea when we might expect to see any mini display 3rd party adapters? Most specifically so people who dont yet have the new model Mac Books can use the new 24" display....

I doubt that you will ever see an adapter to use the new 24" LED with an older model Mac b/c (I think) it would have to be active (not just a passive cable) and the market would probably not justify the cost. If it does ever exist, be prepared for the cost factor (high).

Similar Messages

Mini display to VGA adapters. Will older ones/non-Apple ones work?

(MacBook Pro 17", 2 years old)
What's the 411 on mini display-to-VGA adapters? I'm not particularly thrilled about the prospect of paying $30 from Apple. Will the older "roundy" style adapters work just as well? Ebay is flooded with 'em for cheap. What about the aftermarket ones? Or are Apple's adapters proprietary (I wouldn't put it past them if theirs were!)?
Thanks-

Hello,
I have a weird problem with my Macbook pro 13" bought in sep 09. I have connected my Samsung HDTV 720p via mini display of Macbook pro 13 to DVI adapter n thn DVI to HDMI cable to HDMI port of TV.
When the display cable is unplugged, i am able to surf the internet and watch videos, as soon as I connect the mini display port to macbook pro, iternet freezes.
I even tried to move my macbook far away from the HDTV, but it never helped.
I noticed, macbook was connected to wifi in this situation but internet was not working, even i tried to ping my Netgear wifi router, it could not ping. and turned off the Airport and again turned it on (while the Display cable was connected to HDTV), it was not accepting password for my wifi router.
I dont know what is the problem, i tried all I knew to solve but still helpless.
Anybody please help me get this resolved.

3rd Party Adapters in Soa 11g

Hi All,
Can anybody tell me from where i can download the external (third party) adapters like SAP, Siebel.... for SOA 11g?
from previous posts it was said that there are no 3rd party adapters included in Soa 11g.. But if there are available for soa 10g then Can I use those in SOA 11g?
If so how can I use them?...
Thanks
Marias

Hi,,
Thanks for the response. I installed the third party adapters. Now how can i start using them in the bpel process 11g..
Please correct me if im going wrong.. Can we see those adapters in jdeveloper 11g as we see the previous db, file etc....
--Marias

How 3rd party adapters are created?

Dear Experts
I wanted to know how 3rd party adapters are created, what are the methods and procedures involved in that?
I know 3rd party adapters are available in the market, but i just wanted to know that how they are created.

Hi,
May be this will be helpful to you, It may not be upto your requirement but i hope it will help you.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d1d9bf90-0201-0010-20b0-d00d866891c8
Bye,
Rahul.

3rd party adapters

can i get in detail with screen shots different 3rd party adapters like seeburger,iway etc and when and how to use them.

seeburger is mainly used to handle EDI(mostly used in B2B integration) and iway is used for Siebel.
thanx
Ahmad

3rd party adapters - QAD MFG PRO

I need to know which companies provide third party adapters for QAD MFG PRO. I searched iway and seeburger sites with no success. Please help.
Thanks

Hi
Iway Suite shows QAD adapter but doesnt show up on web.
I think contact them and figure out. Sales should be able to give you a brief or demo
http://www.iwaysoftware.com/products/iway_adapter_list.html
Thanks
Gaurav

Thunderbolt display 3rd party keyboard and mouse?

Hello everyone! I am going to purchase a macbook pro, and the thunderbolt 27" display. What i'm wondering, is can you connect a different keyboard or mouse to the thunderbolt? Thanks

"But some of these third-party sets have an indication: for both windows and MAC OS, and some dont. Does that mean that the ones without the indication will not work?"
It means that the ones with the indication that it is "for both windows and Mac OS" will work on both Windows and Mac but will generally have the Windows style keyboard.
About the time I ordered my Mini, I ordered one of the Windows/Mac compatible keyboards from one of the major online stores. I was concentrating on the fact that the KB was compatible with the Mac and not being aware of the keys being Windows style. It's a nice KB but I'm sorry that I didn't buy a dedicated Mac KB because I keep forgetting which Windows key relates to which Mac key. It's not a major hassle but an annoying inconvenience when referring to a Mac manual and having to translate Mac keyboard instructions to my Windows layout KB.

Is there a way to predict which video projectors will not work with the 2012 MacBook Air using the Mini-display to VGA adapter?

I recently upgraded from a 2011 MBA to a 2012 MBA due to the larger capacity SSD. The 2011 MBA running Lion and Mountain Lion worked with every video projector for lectures. The new 2012 MBA is hit or miss with video projectors. It is not an adapter problem. I have multiple Apple mini-display to VGA adapters with the latest firmware. They all work just fine with the 2011 MBA. Re-starting the 2012 MBA with the adapter and projector connected has not helped.
It it not acceptable to have a laptop that works with projectors some of the time. Apple is aware of the problem. Is the only choice to go back to the 2011 MBA?
RC

I installed 10.8.2 update today with my 2012 MBA. The details of the update include: Resolves a video issue with some VGA projectors when connected to certain Mac notebooks.
I tried using the MBA with a video projector and it found the correct resolution and connected with the projector automatically. Using detect displays in the disoplay preference pane wasn't even necessary.
I hope this is the fix I have been waiting for with the 2012 MBA.
Thank you Apple.
RC
(http://support.apple.com/kb/HT5460)

IMac USB no longer recognizing 3rd party phones (BlackBerry, Android, or Symbian).

Hey everyone, this is my first post to this community support group.
Last week, using my iMac, I attempted to install the Ubuntu OS onto my Nexus 7.
I followed some online guides on how to do so, and realized that I was not up to the task. The process involved various things, although the one I suspect created my current problem was inputing Terminal commands (unfortunately, I can not recall the commands I entered).
Not only was I unable to install the Ubuntu OS on my Nexus 7, but now my iMac does not recognize any 3rd party phones (Android, BlackBerry and Symbinan) that are plugged into the USB ports. Prior to this Ubuntu attempt, my iMac recognized all phones plugged into it's USB ports.
A few things:
1) The USB Device Tree in System Information lists several connected USB devices (iPhone, Printer, External Drives, Etc), but will not display 3rd party phones.
2) The Disk Utility does recognize any phones as hard drives, when they are plugged in via usb.
3) I've tried using the phones' interfaces to switch them from USB mass storage, to camera, to charge settings when plugged into the iMac with no effect.
4) I've tried plugging the 3rd party phones in different USB ports with no results either.
Thank you for any help and guidance you guys might offer!
Jeff

Try doing both a iMac SMC and PRAM reset, it may take several attemps for it to work.

3rd-party MagSafe adapter almost caught fire!

OK, long story short, I was using my 13-inch MacBook just fine. I have been using this 3rd-party power adapter for a month or two after the original stopped working:
http://ep.yimg.com/ca/I/lovemacs_2219_691224488
Things were still going fine, until suddenly just a little while before I began typing this, I noticed the green LED blinking yellow and smoke coming from it! Of course I panicked, shut off the power to the strip it was connected to, unplugged it and pulled out the power cord. The MacBook itself is OK, and the MagSafe port on it looks fine. The MagSafe connector itself looks fine; no frays on the wire, no burn marks on the connector itself, etc.; but now I'm afraid to re-plug it in (this might be the safest option.)
Any recommendations? Should I take my MacBook to an Apple Store? Or should I just go and buy a "real" 60w MagSafe power adapter?

buy an Apple branded adapter, you can often find them used on eBay etc.. 3rd party adapters tend to be of less quality. Lesson learned.

3rd party adapter integration into XI

Dear Experts
I wanted to know how 3rd party adapters are integrated into XI?

Hi Dheer,
There many third party adapters available in market.
One example is seeburger:
U need to follow the below steps for integration into XI:
For the same requirement you need to follow the below steps:
1) First deploye the Std seeburger mapping provided by see burger on XI
2) If you are using the AS2 adapter then you have to install the AS2 server on XI server.
3) Once you install the std seeburger on SAP XI server you will see the AS2,X400,OFTPS,VAN adapter on XI ID.
5) You need to call the std mapping in the adapter module which does the conversion from EDI to XML and XML to EDI.
if u need process then let me know I will send u the configuration threads which is required for integration.
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
Brief about seeburger:
Seeburger adapters like OFTPS,AS2,X400 are used for B2B scenario where the file is coming through WAn network or mailbox. As XI dont have capability to convert the EDIFACT format file to XML the same work will be done by seeburger adapters.
The SEEBURGER Business Integration Converter (BIC) is an any-to-any format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex, high performance XML-to-XML mappings or to interface to existing JDBC data sources.
Supported EDI formats include:
ANSI
EDIFACT
INHOUSE
IDOC
XML Schema
XML DTD
CSV
Delimited Data
positional data
SWIFT
EANCOM
and many more.
See for converting the EDI XML to EDI and XML-EDI you need to have a seeburger mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
refer belwo weblog:
/people/nithiyanandam.au2/blog/2008/02/20/handling-edi-interfaces-using-seeburger-bic-modules
Thnx
Chirag
Edited by: Chirag Gohil on Feb 25, 2008 12:51 PM

I purchased a 3rd party mini displayport to hdmi adaptor. My 2011 macbook air with thunderbolt wont detect the display.

I purchased a 3rd party mini displayport to hdmi adaptor. My 2011 macbook air with thunderbolt wont detect the display.

Is the display turned on? Sometimes it is the simplest of solutions, when details are missing.

How many 3rd party displays can be connected to MBP retina 15"

I was just wondering how many 3rd party displays can be connected to the MacBook Pro with Retina Display 15" and 16GBs of ram. I have contacted the Apple Online Chat and every time I get a different awnser. I know that there are 2 Thunderbolt ports and a HDMI port on the machine. Can someone help me please?
Thanks,
Jayden

Near all screens. You can use the HDMI port to connect the MacBook Pro with Retina display to a HDMI screen, but you have got Thunderbolt.
Thunderbolt is compatible with Mini DisplayPort, so you can use Mini DisplayPort adapters to connect your MacBook to a DVI or VGA screen too

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.

I switched something while perusing an ebay listing (right clicked?) and now it no longer displays the seller's images from their 3rd-party photo host (still works in IE). How do i reverse this?

Sellers can use eBay's image system to display their items, or use a 3rd-party that allows more and large images to be displayed directly within the description of the item. With this problem, the resulting listings are also completely messed up because of the change in layout (no pics).
i have checked many other listings and they show on IE but not FF. It occurred in mid-swing so i know i accidentally switched something, but am not sure how to get it back.

See this: <br />
https://support.mozilla.com/en-US/kb/Images+or+animations+do+not+show

Mini display 3rd party adapters

Similar Messages

Maybe you are looking for