Mini Display cable length

Can anyone tell me how long exactly the mini display cable is for the 24 inch dispaly.
tks

Just measured mine at 43.75" from rear of monitor to tip of Mini DisplayPort connector.
Inexpensive extensions are available for these (and necessary in my case).
Message was edited by: myaka

Similar Messages

  • Can Adobe Premiere run on 2013 Mac Book Pro (thunderbolt port) and display on 2010 iMac (Mini DisplayPort) using TDM. TB cable   Opt. F2 didn't work. Will a Mini Display cable work?

    I need to work on Adobe Premiere on my 2013 Mac Book Pro (with thunderbolt port) and display it on my 2010 iMac (with Mini DisplayPort) using Target Display Mode (TDM). I tried using a thunderbolt cable plus Option F2, but it didn't work. Will a Mini Display cable work? Any other suggestions?
    iMac specs - 21.5 inch 2010 iMac 3.06 GHz Intel Core i3 4 GB 1333 MHz DDR3
    Mac Book Pro specs - 13 in. retina 2.6 GHz Intel Core i5 16GB 1600 Mhz DDR3

    2010 iMacs do not have Thunderbolt, they have mini-display ports. You are using the wrong connection, you need a mini display port to mini display port. Please read up on what Apple says in Target Display Mode: Frequently Asked Questions (FAQ)

  • 24" LCD has Super short mini-display cable that does not reach

    I was setting up a 24" display (on an LCD arm) and i noticed the mini display cable is very, very short. It does not reach to the Mac Pro under the desk. I guess the 24" displays were made for laptops and did not expect that the cables would need to reach under a desk.
    I couldn't find a Mini-display to Mini-display extender. Does anyone know of one?
    Anyone considering two 24" monitors might want to review their own setup, to see if it works with the exceptionally short mini display video cables on the 24" display.
    Message was edited by: Charles Barone

    Charles, did you ever find a solution for this problem? I am ready to get a new Mac Pro and 24" display, but a 3 foot (1 meter?) cable is about two feet too short. I don't want to have the MP box sitting between my feet so it can be within 3' of the connector at the back of the display. I talked with someone at the on-line apple store today and he checked with an engineer and looked at the cable that comes with the display, and it was indeed only ~3' long. Since this type of monitor connection (the mini display port) is supposedly going to become the new "standard", I would hope that companies (e.g., Belkin, etc) will have high quality but longer cables available. I assume that the cable you have has the same mini display port plug on each end, and no adaptors are necessary?
    If anyone has a solution to this short cable dilemma, please chime in!
    Thanks

  • Mini Display Cable 27" Cinema Display & rMac Book Pro

    Hi
    is there any extentions or convertors where i can connect my 27" Cenima Display which have a mini display cable not thunder bolt
    to Mac Book Pro with retina Display ?
    Kind Regards

    From the MacBook Pro retina specs:
    <http://www.apple.com/macbook-pro/specs/>
    "Thunderbolt digital video output
    Native Mini DisplayPort output
    DVI output using Mini DisplayPort to DVI Adapter (sold separately)
    VGA output using Mini DisplayPort to VGA Adapter (sold separately)
    Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)"
    <http://support.apple.com/kb/HT5219>
    See question 18.

  • Thunderbolt Versus Mini Display Cable

    I want to extend the Thunderbolt cable on the back of my display to my new Mac Pro.  Apple only sells a male to male Thunderbolt cable and they do not sell a Thunderbolt to Thunderbolt connector.  C2G sells a mini display cable that they claim is the same as a Thunderbolt cable (Part 54168).  It has a male connector on one end and a female connector on the other.  It will definitely extend my existing cable but the question remains that will it provide the same connectivity (functions) as the Apple Thunderbolt cable which has two male ends.
    Can anyone provide some insight?

    The Mini DisplayPort cable won't work.  Buy a M-M Thunderbolt cable and connect it from the computer to the Thunderbolt port on the back of the display.  You can then use the display's Thunderbolt cable to connect other Thunderbolt devices.

  • Dual Display Issues, Mini Display Cable, Firewire, USB, Nothing Works

    I am working on a project for my supervisor, the specifics of each machine are listed below to the best of my ability:
    Machine 1:
    iMac9,1 Intel Core 2 Duo
    Version: 10.6.8
    Build: 10K549
    Machine 2:
    iMac10,1 Intel Core 2 Duo
    Version: 10.6.8
    Build:10K549
    I have a iLuv Mini DisplayPort Cable, a 9-Pin to 9-Pin Firewire Cable, a M/M USB Cable and an ethernet cable.  What I have been trying to do is link these two computers together so that each can be used as a seperate processor but their screens can be shared.  Before anyone tells me this is impossible, these two monitors have in the past been connected together so there was the ability to dual use the computer monitors.  I do not remember if I actually had the processing power of both available.  When I plug the minidisplay port cable from one computer to the other the screen on Machine 2 will blink black to blue and then go back to an independent screen.  The displays tab on neither computer shows two displays and none of the command f2 or f3 prompts are causing either computer to respond.  I have tried connecting them with firewire and USB and can only get disk transfer mode from the Firewire.  I know these computers used to be able to support being connected to one another and now I have no idea what is going on.  I don't personally remember having a minidisplay port cable in the beginning so its possible I am going about this all wrong.  I have called Apple Support many times and they suggested an OSX reinstall.  I found the reinstallation software for 10.6.3 for a macbook 13 inch and each computer recognized the disc but said that the operating system could not be installed.  At this point I have done everything I can think of including running a hardware test through the diagnostic tool at startup and on both computers the test came up with no error codes.  Please please help me get these computers working again for my boss!
    -Alan

    Both the 9,1 (Early 2009) and 10,1 (Late 2009) iMac's only support Target Disk Mode using FireWire.
    see > Target Disk Mode vs. FireWire networking | Macworld
    or > Apple Tips Using Target Disk Mode
    Adding that if the Late 2009 is a 27" then it supports Mini DisplayPort input for use as a monitor from another Mini DisplayPort Mac.
    see > iMac: How to use your iMac as a Target Display Mode display
    An Ethernet cable can be used for Networking and File Sharing the two iMac's.
    see > Mac Basics: File Sharing
    Plus connecting two iMac's together with a USB cable, will do nothing except trip the USB port overloads or something worse.

  • Cinema HD Display cable length

    Hi,
    Does someone know the cable length of these displays ? measured from back of display to end of DVI connector

    I have the same problem too with my Apple 30" display (a year old) and my Mac Pro (a month old). It never used to do this and now it does it regularly whenever the macpro goes to sleep. It tries to come on if I play with the keyboard or by clicking with the mouse but the display will not come back on. It is quite a pain in the arse to restart or reboot constantly. Have checked the software and it is up to date, drivers are up to date. Would appreciate any help.
    Namaste....
    akaimon2
    NVIDIA GeForce 7300 GT:
    Chipset Model: NVIDIA GeForce 7300 GT
    Type: Display
    Bus: PCIe
    Slot: Slot-1
    VRAM (Total): 256 MB
    Vendor: NVIDIA (0x10de)
    Device ID: 0x0393
    Revision ID: 0x00a1
    ROM Revision: 3011
    Displays:
    Cinema HD:
    Display Type: LCD
    Resolution: 2560 x 1600
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display:
    Status: No display connected

  • Mini Display to Mini Display cable

    Hello. I have a 27inch mid 2010 iMac and I'm soon to buy the new 27inch 2012 iMac.
    Is there a reason the apple store does not carry a mini displayport to mini displayport (male to male) cable to connect the older iMac as a 2nd monitor?  Has Apple deemed this as not a good idea for a reason I can not understand yet?
    Please help. Thank you.

    Now Apple only sells Thunderbolt to Thunderbolt cables, but not Mini DisplayPort to Mini DisplayPort cables, so Thunderbolt could be the reason. You can buy a third-party cable to connect both Macs > http://www.belkin.com/us/p/P-F2CD008
    To use the Mid 2010 iMac as a monitor > http://support.apple.com/kb/PH11302

  • Why Does The Display Cable Length Change Screen Resolution?

    I have a Power Mac running two 23" Samsung Displays using 6' cables.  This has worked fine for 3 years. Recentily I tried to use 15' cables, but it changes the resolution of the displays.  The resolutions are not even the same.
    Any ideas on this?  The 1st image shows the screen resolutions with the shorter cables.  The 2nd image shows the resolutions with the longer cables.
    Thanks!

    Do not use the menuBar item for debugging. It shows only "greatest hits". The full range you can select from will be shown in:
    System Preferences > Displays
    The DVI connector on the computer outputs a "regular" VGA signal in the blade at the end and the four pins around it, plus H-Sync (which is in the top row of the grid next to them). Its "adapter" just swaps the signals around.
    The Mini DisplayPort adapter asserts a signal to the Mini DisplayPort which requests VGA-compatibility mode, and the interface produces an approximation of VGA.

  • Multiple 30" Cinema Displays, cable length too short

    I have two 23" Cinema Displays, and they work great! Power adapters have long clean leads and can put them away from my G5 and place the displays where I want. Then I bought a 30" Cinema Display to try in prep for a "Nehalem" machine. I discovered that the power adapter has to be 6 inches away from the back of the computer and the monitor cable is SHORT. I want to use two 30" displays, but the cables are too SHORT and I don't want those two white bricks (power adapters) behind a new Nehalem. Apple says you can run up to eight 30" displays, with the necessary video cards, but no mention how to reach the second display let alone the 8th display!! Does Apple have cables in a male-female configuration? I have looked at Gefen.com and their extensions are Male-Male for the Apple Combo Extension Cables for dual link (30"). I could say demeaning things right now, but I won't.

    Thank you for the quick reply, I can place the power adapter where I want with your solution. You would have posted if you knew about an extension with an "elegant breakout for connection to DVI, USB and FireWire ports" but I will still ask if you know of that kind also so that all monitors have USB and FireWire.

  • Apple 30" display cable length

    I have a very simple question, but so far I've been stumped finding the answer (I have spent a better part of an hour searching this forum and googling -- no luck!). And my question is: how long is the video cable on a 30" ACD? My Mac Pro sits in a corner underneath my rather large desk and the cable needs to be at least 4 feet long (preferably >4.5 feet).

    Alright, now that everybody's had their turkey and the football game is over, can someone please get off the couch, find a measuring tape and measure the darn ACD cable for me?

  • Thunderbolt mini display port cable to HDMI not registering

    I recently purchased a 6" mini display port to HDMI Cable. When I connected my macbook to my HDMI on my TV the macbook pro does not show the screen as a display option. When I go to system prefrences and under displays the tv is not showing up under arrangements. The only options I have is Display and color, I do not have an arrangement option. My TV doesn't seem to see the computer either.
    I have a thunderbolt port but the cable says it's for a mini display port but works with Thunderbolt, I've used similar mini display cables before with the thunderbolt with no issues. I'm on an early 2011 macbook pro running 10.6.8
    Thanks!

    You may have better luck getting a response/answer if you post the question in the MacBook Pro discussion here.

  • Can i use a hdmi to mini display port cable to use my iMac as external monitor for a windows laptop?

    Does anyone know if a hdmi to mini display port cable can be used to link a  windows laptop with an 27 inch iMac to use the iMac as an external monitor. Or are there other options to connect my DELL latitude 6430?

    Is the 3.5mm-to-optical cable any better than using a standard 3.5mm?  I don't know too much about this stuff.  My thought process was that if the source of the connection is a 3.5mm jack, does it make a difference using a cable that starts as a 3.5 and converts to optical?
    Chances are excellent that if your receiver is less than 20 years old it has an optical input, this is a digital signal which will sound MUCH MUCH better than using an analog 3.5MM to 3.5MM connection. I recommend using the cable suggested or one with the same connections but of a different length if your needs warrant it.

  • I have a Macbook Pro 13.3 i5 w/ no hdmi port. How can I connect my Mac to TV to watch video, photo ?  Is the Thunderbolt port a mini display port where I can use a mini display port to HDMI cable? If not, what are my options??

    I have a Macbook pro 13.3 w/ i5 that has no hdmi port. I want to be able to connect the Mac to my TV set to watch Video, Photos and files from Mac to TV.
    Is the Thunderbolt port similar to a display port or mini display port? Can I use thunderbolt port to connect thru a mini displayport to HDMI cable or converter?
    Been trying to locate a USB to HDMI cable or converter (at a reasonable price) but all I found is a displayport or mini displayport to HDMI cable/converter.
    What other options are available ?
    Thanks a lot for your assistance.

    Thunderbolt uses a Mini DisplayPort adapter to send video and audio to HDMI. Here's some on Amazon http://www.amazon.com/s/ref=nb_sb_ss_c_2_8?url=search-alias%3Dcomputers&field-ke   ywords=mini+displayport+to+hdmi&sprefix=mini+dis%2Caps%2C249#/ref=nb_sb_noss?ur l  =search-alias%3Dcomputers&field-keywords=mini+displayport+to+hdmi+with+audio&rh =  n%3A172282%2Cn%3A!493964%2Cn%3A541966%2Ck%3Amini+displayport+to+hdmi+with+audio

  • Help using a mini display port to HDMI cable with MacBook Air and TV

    Hi, Apple gurus. I need help setting up my MacBook Air to my Vizio TV using a mini display port to HDMI cable that I just purchased on Amazon.
    And here's info about my MacBook Air:
    In the Amazon reviews, someone posted the following how-tos, which aren't working for me:
    1. Plug in both ends, mini display port on your macbook and the HDMI on any available port on your LCD.
    2. Go to upper left Apple menu and scroll down to system preference. Or use your FINDER from the dock, go to applications, then system preference.
    3. Click on Displays
    4. Click on DETECT DISPLAY
    5. A similar screen pops up with name of your LCD, mine says SONY LCD, click on ARRANGEMENT
    6. Click the box that says MIRROR DISPLAYS.
    7. Go back into system preferences and go to SOUNDS which is located under HARDWARE.
    8. Click on OUTPUT, then select HDMI, which should be listed next to your LCD name.
    I ran into trouble at step #4. My MacBook Air doesn't list the option of "detecting display." I do, however, have the box mentioned in step #6, "Show mirroring options in the menu bar when available."
    Regarding step #8, HDMI didn't appear in the list — I only see "internal speakers."
    So, what am I doing wrong? Or, did I buy the wrong cable?
    Thanks in advance for your help!

    Or you need to get an appropriate adaptor. The Griffin adaptor sold on Apple's Online Store will work with a standard HDMI cable.

Maybe you are looking for