Mini Display Port behaving badly. Anyone else have this problem?

I have had an ongoing issue with a mini display to VGA adapter, every time I plug it in it becomes erratic over the course of use. It will lose signal and send the monitor blank if I go to remove any of the usb peripherals in the back of the unit. I have returned the unit to Apple 2x now and they have replaced the logic board 2x and the mini display to VGA adapter, yet this is still happening.
I have tried it with different monitors and cables etc, but this is still going on.
Is a mini DVI to VGA any more reliable?
Has anyone else had this issue

Thanks for the suggestion , but after an extensive talk with tech support and running through the usual troubleshooting regime we came to the conclusion that the best thing for all concerned is that Apple send me a mini DVI-VGA adapter. I am cool with that. No matter what combination of adapters and cables and monitors I plugged the mini into I kept coming up with the same results and my local guys had the same thing happen.
Thanks anyway.

Similar Messages

TS1398 My new IPad mini has poor wifi reception. Goes in and out. My IPod, IPhone, Ipad1 and Ipad2 work finer. I think it has wifi antenna issues. Does anyone else have this problem?

My new IPad mini has poor wifi reception. It goes in and out. My IPod, Iphone4, Ipad1 and Ipad2 work fine. What can I do? Does anyone else have this problem?

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

HT4623 i no longer have video capability on my ipad mini after downloading ios7. has anyone else had this problem?

i no longer have video capability on my ipad mini after downloading ios7. has anyone else had this problem?

Describe the problem. Won't show videos? Won't take videos? Or other?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

Just installed lollipop. Now I cannot access sounds and notifications. Says" Unfortunately, Settings has stopped". Anyone else have this problem?

Installed lollipop. Cannot access sounds and notifications in settings. Says, "Unfortunately, settings has stopped". Do not have problems accessing other display. wallpaper, etc. New update says installed successfully. Anyone else have this problem after updating?

Same here. Any help appreciated

Almost everytime I sign into Game Center or into a game itself my iPad goes back to desktop. Does anyone else have this problem?

I'm having a lot of problems sometimes signing into Game Center, or when the game itself is loaded I will click on something and it pretty much crashes and goes back to desktop! This is very annoying. Just not sure why this keeps happening. Does anyone else have this problem and know what the cause of it may be?

My guess would be you don't have enough memory available to run the games that you are trying to play. This is not supposed to happen in iOS - but I have seen too many instances to believe that the iOS can handle it properly all of the time. My suggestion would be to close all apps in the recents tray, reboot and start over again and see if that helps.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
The problem could be something else software related and restoring the device might help, but I would start with this and see how it goes.

I have safari 7.0.2 and OS 10.9.4, everytime I try to install a safari extension such as, Pocket, I get an error message that says, Cannot install extension, I get this with every one of them. Does anyone else have this problem?

I have Safari 7.0.6 and OS 10.9.4. I cannot install any extensions. Everytime I select install I get an error message, "Cannot instal extension" Does anyone else have this problem?
Thanks Steve

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Vanishing Point Filter Always Crashes Photoshop CS5 - Anyone else have this problem?

19 out of 20 times I use the vanishing point filter in PS CS5, it ends up crashing the program. This usually happens when I try to adjust the angle of a new plane. Does anyone else have this problem? I need to use this feature for my job. Are there any alternative filters or programs I could use instead, or could I somehow fix the plugin?

Someone reported this way back around when PS CS5 was first released I think. I don't find the thread but as I recall the advice at the time was to update the display driver on the system... Visit the web site of the maker of your video card (e.g. nvidia.com or ATI.com) and download/install the latest driver release that matches your hardware and operating system.
-Noel

Staticky voice-over... anyone else have this problem?

I set my clock on my MBP to announce the hour at the top of every hour. My g4 Ti-book was also set up to do this, and it was a bit of a comfort during LATE NIGHT work sessions. I've set up the MBP to do this, but when it reads the hour it sounds very very bad. I can hear the voiceover voice start to talk, but then it cuts in and out rapidly (like static) and stops after less than a second. Has anyone else had this problem? Is there some odd setting (like the setting in the MIDI-utility that was causing web audio not to be heard) that might be affecting the voiceover utility? Oddly, when i have voiceover read other text, it sounds just fine. Its only the hourly time report thats messed up.

Lightroom 4, Windows 8, Dell Laptop Inspiron 17, Pentium Processor 1.8 Ghz It would do it occasionally on the old computer but on this computer it's several times a day. This is a brand new laptop and installed Lightroom from a disk, so no changes.
Gods richest blessings,
David
God has to nearly kill us sometimes, to teach us lessons.
                                                     John Muir
    Re: Anyone else have this problem?
    created by Jeff Schewe in Photoshop Lightroom - View the full discussion
Uh, this is your first post, so you get some leeway...but, unless you provide enough info to help you troubleshoot, it's a guessing game and that isn't what the forums are all about... What LR version?What OS and version?What computer?What are the specs? Is this a new problem or have you had problems in the past?Any recent changes to your computer? Lot's of info you are not providing...
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5252344#5252344
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Anyone else have this problem?
To unsubscribe from this thread, please visit the message page at Re: Anyone else have this problem?. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Message was edited by: Geoff the kiwi
To remove email address.

Siri doesn't work still after the apple rep I spoke to said it would be back up this morning. anyone else have this problem too? and how can I fix it?

it has been 24 hours and Siri still doesn't want to take any commands anyone else have this problem too? and how can I fix it? she just keeps saying there is something wrong and to try again later. I didn't buy this phone to be jipped on any features.

Mine wasnt working either but i saw in another thread that you should try Settings>General>Reset>Reset All Settings. Ignore the warnings, all your settings have to be changed back but you dont lose any media or data, you just have to put your background back and location settings. It fixed Siri for me but dictation still doesnt work. Hopefully it works for you :-]

Updated my iphone 4 to 7.0.2 yesterday, worked fine for an hour, now phone wont even turn on??? anyone else have this problem?

I have an iphone 4, updated it to IOS 7.0.2. yesterday, it worked perfectly for a while, now cannot even turn my fone on...
anyone else have this problem ??
thanks

Hey xxikearnsxx,
When troubleshooting power issues, the following article provides the most relevant information:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
- Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
- Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
Learn about LCIs and corrosion.
- Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
- After at least 15 minutes, if:
               - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
               - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
               - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
- If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
               - If the display turns on, go to step 4.
               - If the display remains black, go to next step.
- Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
- If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks,
Matt M.

I have an iphone 4, when I plug in headphones I can pick up music and only background sounds, but no voices. It happens on every video or movie I see, but music works perfectly fine. Did anyone else have this problem or was it just me?

I have an iphone 4, when I plug in headphones I can pick up music and only background sounds, but no voices. It happens on every video or movie I see, but music works perfectly fine. Did anyone else have this problem or was it just me? If not can anyone help me?

Hey there Srkupo,
It sounds like your vocal audio is not working with your headphones connected to your iPhone. I would start with the troubleshooting from the following article to help troubleshoot them named:
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/ts2634
Update your software
Install the latest version of iOS. You can see which version is on your iPhone by going to the About screen.
If the device doesn't update successfully, the issue might be with your device and not the accessory. Learn how to check your iPhone, iPad, or iPod touch.
Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
If this does not resolve the issue could you elaborate on where you are listening to this content from to help isolate the issue?
Thank you for using Apple Support Communities.
All the very best,
Sterling

When I try to enter codes for digital movie downloads it tells me "code redemption is temporarily unavailable. Try again later." Customer support has been no help. Anyone else have this problem?

When I try to enter codes for digital movie downloads it tells me "code redemption is temporarily unavailable. Try again later." Customer support has been no help. Anyone else have this problem?
Am sick of going back and forth with what has turned out to be worthless customer support. Have sent them so much info and pictures, no help. All they do is send me links for instructions on how to redeem the codes. I know how to redeem, I have redeemed at least 50 codes. To them I am obviously an idiot though. To me it seems to be a problem on their end, but can't get an answer from them on why it is telling me code redemption is unavailable. Please help! Anybody!

Confirming my suspicions with every passing hour. Support on this forum is non-existent like the support from Apple support. But, you got my money now... why would you care?

I cannot get scrabble to work on my ipod touch. I've uploaded, deleted, reloaded and nothing seems to work. It asks for a password but will not let me in. Anyone else have this problem?

I cannot get scrabble to work on my ipod touch. It only works on my macbook. I've uploaded, deleted, reloaded and nothing seems to work. It asks for a password but will not let me in. Anyone else have this problem?

Hi BDAqua,
I can go to /System/Library/Frameworks/, but JavaVM.framework/Versions/A/JavaVM does not exist!
Hi Linc,
I have already downloaded that updater, and it says 'A newer version of this package is already installed'

HT1657 Hi, at the moment I can only seem to watch a rented movie once - previously I used to be able to watch it as many times as I liked during the 48hr window. Anyone else have this problem?

Hi, at the moment I can only seem to watch a rented movie once - previously I used to be able to watch it as many times as I liked during the 48hr window. Anyone else have this problem?

This doesn't seem right.
I paid for a rental and downloaded an HD movie, Avatar. I could start watching within about a minute, it played without skipping a beat.
My wife started watching the movie the next night and got about half way through.
The next day, she tried watching the rest, and selected the film and clicked on "resume watching".
But instead of streaming and playing like it should, we got the spinning wheel of death followed by a message "Ready to play in 1 minute" which soon became "Ready to play in 2351 minutes"!
Additional information that I can add is that it was Sunday afternoon which is peak time for internet usage and I'd just exhausted my data allowance before the speed limiting kicks in. Basic internet using browsers at that time was really slow.
So it was as though the movie we were going to resume watching was going to be downloaded from the iTunes Store again, and since my connection had been speed limited, it was going to take forever. I thought you downloaded a rental to your hard drive and it deleted itself after it expired? So any subsequent streaming to AppleTV would be coming direct from your hard drive. It shouldn't have been affected by the speed of my internet connection at that time, surely. Anyone else experienced this?
Actually, I just noticed this post, I'm sure it's related...:http://discussions.apple.com/thread.jspa?messageID=12398832&#12398832

HT204291 my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem? How can I fix it?

my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem? How can I fix it?

Hi freezebri,
The following steps may resolve your issue:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
Hope this information helps ...
- Judy

I just updated my iphone 4s to ios 6 and now whenever i take a picture it doesnt save to the camera roll. does anyone else have this problem or know how to fix it?

I just updated my iphone 4s to ios 6 and now whenever i take a picture it doesnt save to the camera roll. does anyone else have this problem or know how to fix it?

Same problem on im iPhone4 / iOS6 with normal camera!
The camera takes a picture but the picture (video) doesnt appear in my Photos and therefore is not saved!

Mini Display Port behaving badly. Anyone else have this problem?

Similar Messages

Maybe you are looking for