Mini Display Port to DVI Adapter

Hi guys,
I bought a MiniDisplayPort to DVI adapter @ Amazon to connect my Macbook (bought in 2009) with my Samsung 27" display. here's the link for the adapter:
http://www.amazon.de/HDGear-DisplayPort-Adapter-Stecker-Buchse/dp/B002CBMZSA/ref =sr_1_3?ie=UTF8&qid=1320868644&sr=8-3
and the link to the display: http://www.amazon.de/Samsung-SyncMaster-P2770HD-Reaktionszeit-TV-Tuner/dp/B002PW DEX6/ref=sr_1_1?ie=UTF8&qid=1320869130&sr=8-1
(The display works on my windows computer without any problems with FULL HD. So that means with 1920 x 1080. I've connected the pc with the display via a DVI cable too.)
But actually the problem is that when I connect my macbook with the dispay I can't choose full HD. I can only choose a lower rate. So my display has on the left and on the right side always a black bar! The screen is than more or less pixelated!
Do you think i would have the same problem with a original Apple adapter?
And no, I can't use a HDMI adapter
Guys please help me

Welcome to the Discussions!
Apparently, you bought the mini-DVI to DVI adapter, which was for the previous generation of MacBook and MacBook Pro computers. Return it and get the correct one.
bd

Similar Messages

  • I have a MacBook 5.1 and want to play movies from my computer onto my TV. I have a mini display port to DVI adapter but when I connect it to my TV nothing happens. What do I need to do?

    Hi,
    I have just connected my MacBook to my TV with a mini Display port to DVI Adapter which was connected ta HDMI to DVI Video Cable which I connected to my TV. I turned my TV on and my TV could not find any signal. I used the TV menu to connect to HDMI , but it said there was no signal. What do I do now?

    try turning on the mirroring option and see if anything changes the following link will show you how to enable mirroring display setting
    http://www.ehow.com/how_5661153_set-display-macbook-mirror.html

  • Mini Display Port to VGA adapter + Monitor Eizo s2231W = CRASH

    I purchased a new macbook pro last month with 2 adapters, one for VGA the other for DVI. I'm having some trouble with the Mini-DVI to VGA adapter. The Mini Display Port to DVI adapter works well.
    When I attach the VGA adapter to the monitor it works well for a couple of minutes, then I dont know why my MBP crashes and I can see a purple or white screen. The crash is really a crash... cauz I cant do anything. My mac is frozen and the only way to resuscitate him is to keep pressed the power button for a while till it turns off, and then turn it on again.
    You can say... why do you need the VGA if the DVI works...
    the problem is that I'm probably supposed to use it one day attached to a projector because of a presentation at university.
    So I dont wanna see my new macbook pro freezing in front of my professor.
    please help.
    EDIT:
    adding some precious information
    My hardware configuration as regard the graphic chipset is
    NVIDIA GeForce 320M
    The resolution of the external monitor is 1620x1080
    I'M NOT using the mirroring ( but the desktop extension)

    I had the exact same problem. It actually escalated from there and it would crash at the startup screen (the white one with the apple and the spinning gear). The only way I was able to fix this was to reformat the entire computer. I was lucky enough to have backed up all my data when it first started crashing. I've only reformatted yesterday and things seem fine for now. I don't know what caused it, or how to fix the problem any other way.

  • Will the mini display port to vga adapter work with a 2007 mac book?

    will the mini display port to vga adapter work with a 2007 mac book?

    I think your Macbook came with a Mini DVI port instead of a Mini Display port.

  • Why does my mini display port to hdmi adapter cut out intermittently?

    I have a MacBook Air 2012. Using a bestbuy mini display port to hdmi adapter connecting to a sony led tv.  The picture and sound transmits to the tv, but the signal would cut out after 10-15 seconds and it would last about 3-5 seconds and then the picture would come back again. 

    to me something happened similar to me but after removing the connector and put it back was solved, and now to use it with my TV I have to make sure both are well connected to both the Mac and plug the HDMI cable and adapter tv .
    I hope that solves your problems resolved as mine
    Blessings.
    a me me a pasado algo similar pero luego de sacar el conector y volverlo a poner se soluciono, y ahora para poder usarlo con mi TV tengo que asegurarme que esten bien conectados ambos tanto el conector al mac como el cable hdmi al tv y al adaptador.
    espero que eso resuelva tus problemas como resolvio los mios
    Bendiciones.

  • MacBook Pro(Mid 2012) Can't connect to my Dynex TV with mini display port to VGA adapter

    I have a MacBook Pro(Mid 2012, running  OS X 10.9.4) and I recently just bought a mini display port to VGA adapter so I could hook it up to my dynex TV but when I connect everything my TV says no signal.  Do I need to do something in settings?

    Hi psikalis,
    If you are having issues connecting an external display to your MacBook Pro, you may find the information and troubleshooting steps in the following articles helpful:
    OS X Mavericks: Connect multiple displays to your Mac
    http://support.apple.com/kb/PH13814
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Regards,
    - Brenden

  • Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

    Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

    No. You need a converter box like this to go with your MDP-VGA adapter:
    http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=pd_cp_e_2

  • Mini display port to HDMI adapter not working

    I can not get my MacBook OS X to dispaly on my new Samsung LED TV. I have a mini display port to HDMI adapter (two years old) conneted with an HDMI cable (new) into the HDMI input on the TV. I tried both inputs, tried resetting the TV, plugging, unplugging, restarting, checked all my system preferences...I can not figure it out. I took my cables to a local store, tested the HDMI cable, and it works. Tested the adapter and they had the same problem I have on my Mac. The screen will flash blue when you plug it in, but will not show up in the TV. I think the adapter must be bad, nothing else makes sense???

    Hi Kater24,
    Apple doesn't make a Mini DisplayPort to HDMI adapter, so the one you've got there is a 3rd party one that's designed to work with the Mini DisplayPort on your Apple computer. The adapter is pretty much plug-n-play, there's no configuration necessary. Plug it into the machine, the HDMI cable from the other end of the adapter into your TV, select the HDMI input on your TV and fire up the computer.
    If that's not working it's possibly an issue with the adapter and/or cable to the TV. Any chance you might have access to another TV for troubleshooting purposes?

  • Im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI.  I have the most success with the following operations in this order:
    1)  Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
    2)  Plug the mini displayport end of your new super-cable to the computer.
    3)  Plug the HDMI end into your TV.
    4)  Switch inputs on your TV to the proper input.
    5)  If still nothing on the TV, try a different HDMI port on your TV.
    Hopefully this helps!  Good luck.

  • I have a Samsung HD TV and I purchased a Mini Display port to HDMI Adapter today. For some strange reason I get no display on my HD tv. I even tried switching a few HDMI cables and nothing popped up. I made sure my computer was updated. Help pls

    I have a Samsung HD TV and I purchased a Mini Display port to HDMI Adapter today. For some strange reason I get no display on my HD tv. I even tried switching a few HDMI cables and nothing popped up. I made sure my computer performed all software updates, and I even tried calling Apple Support. They just told me to keep trying different hdmi cables and see if anything pops up. Does anybody know what the problem is? My HDMI cable is from "rocketfish" also my display port is too.

    You may have the screen refresh rate set higher than the TV is generally able to track reliably. It may be able to get there most times, but occasionally loses sync because it is out of its nominal range.
    I suggest you sit down with the manual for the TV and find out what resolutions at what refresh rates it intends to support through VGA, and make sure your screen settings are near (or below) those limits.

  • HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

  • Mini display port to dvi or vga adaptor?

    I currently use a MacBook Pro and want to use the mini display port to my 24 inch Samsung LCD screen. My question is should I use the mini display port to DVI or VGA? My Monitor has both ports on back. I know that DVI is Digital and suppose to be the superior source compared to VGA analog, but I have only used VGA when using my Monitor with my old PC and it seemed fine enough for me.
    If, I do go the DVI digital route will it be that much better graphics compared to just using VGA?
    Finally, has anyone hooked up a mini display port to either DVI or VGA adaptor into an LCD monitor? What are your thoughts, concerns, advice etc. I realize its a very easy thing to do, but seem tied up between using DVI or VGA port.
    Thanks,
    DH

    Diffferences are not remarkable but DVI is indeed better. I wuold then choose DVI.

  • Mini display port to DVI not working

    The mini display port of my late 2009 27" iMac is not working with DVI.  Using the same monitor, DVI cable, and mini display to DVI adapter, I can connect my Air with no problems.  So the monitor, adapter, and cable are fine.  I can also connect my iMac to the same monitor using a VGA cable and a mini display to VGA adapter.  So the problem clearly seems to be with my iMac.  Has anyone had similar problems?  Any advice?  I think the image quality of DVI is substantially better than VGA so I really would like to get this working.  But I don't think the difference is worth carrying my 27" monster into the Apple Store. I could buy a mini display to HDMI adapter, but I would rather not buy yet another adapter (I think I have about 15 already with my various idevices) - and it might not work either. The DVI setup is simple and really should be working.  I bought a monitor and also a HD TV with DVI ports specifically for this.  Thanks.

    Hello,
    Using the VGA connector, what resolution is set on the Monitor?
    Is there any input choices on the Monitor for port or source?

  • Mini Display Port to VGA Adapter Resolution Issue

    Hi there folks, I just had to replace my NVIDIA 8800 so I opted for the upgrade to the ATI Radeon HD 5770 (Apple part number: MC742ZM/A)
    I have two monitors on my desk, an apple 30" cinima display and a smaller 19" Hyundai monitor that uses a VGA connection as my second display.
    After hooking up my Cinima Display to the DVI, and the Hyundai to the Mini Display Port via adapter and restarting my Mac the second monitor does not show up. Well, It appears on the arangement screen, and on the system profile screen, but no image appears.
    If I unpluged and replugged the monitor  then I can get an image to appear. Only I cannot change the resolution from 800x600. The monitor supports 1900x1200.  I can see the correct resolution in the list, however selecting that resolution will not stay. It always reverts back to 800x600. I tried several other lower resolutions and none of those work either.
    I zaped the PRAM, checked for system updates, hopped on one leg and cursed the gods but nothing has worked so far. I can give tech support a call tomorrow, but I was hoping someone on the forum knows of a solution since I know many of you are smarter than the tech support folks.
    Thanks in advance!

    I had the exact same problem. It actually escalated from there and it would crash at the startup screen (the white one with the apple and the spinning gear). The only way I was able to fix this was to reformat the entire computer. I was lucky enough to have backed up all my data when it first started crashing. I've only reformatted yesterday and things seem fine for now. I don't know what caused it, or how to fix the problem any other way.

  • Mini display port to DVI problems

    Hello community,
    I have a question regarding the connection from an iMac via the mini display port to a DVI input at a TFT monitor. I have an older TFT monitor and now I connected the iMac with this monitor via mini display port -> DVI adapter -> DVI cable -> monitor.
    It is quite a simple connection, but actually when I force Mac OSX to detect external monitors it does not react at all. Mac OSX behaves as if there is no connection to an external monitor.
    I already told this to my reseller and they told me that the adapter is not working correctly and they gave me another one. With that one I have exactly the same problem and now I'm quite sure, that it is not a problem of the adapter, but somehow my iMac does not find the external monitor.
    Is there probably an underlying problem I do not understand yet?
    By the way, my very old Macbook White has no problems detecting the monitor. If I use the older video output it works fine, but the new output at my iMac 21,5 inch does not work with my monitor.
    My question is, why does it not work and what kind of monitor do I need, that it can be connected with my iMac (via DVI)?

    Is the adapter plugged in all the way in the Mini DisplayPort?  It takes more force than you might expect.

Maybe you are looking for

  • Test Driven Development (TDD) in the ABAP world

    Hi All, It's been a long time since I've had any spare time to be active on the SCN forums so firstly hello to everyone. I've worked on a number of different SAP technologies over the years, starting with ABAP and moving into BSP, Portal API, Web Dyn

  • Dual Line Chart : Dynamic Secondary Axis

    Hello All, I am currently working on Dual Line Axis to Compare  ANY Two KF's based on user Selection in the provided Dropdown boxes. Also, the data has to be switched between Month and Quarter based on the Radio button Group. Here is the Screen shot

  • Can I Create Chapters Separately in iBooks Author and Merge Into a Single iBook?

    In a print page layout package like InDesign, chapters of a book can be created separately and then merged into one book file. Is it possible to do that to create an iBook in iBooks Author? Thank you.

  • Moving Avg Price is not updating in material master even after PO GR

    Dear Gurus, All of the materials in our company won't update the MAP even after the goods movement, and the Price control is set as 'V'. Can anybody give me the idea how to track the IMG setting? Jamie

  • Minimum Development Landscape for XI

    Hello, In most cases the proposed optimum landscape for an XI project is the following: 2 XI servers such that    DEV R/3 linked via logical name to XI DEV and    PRD R/3 linked via logical name to XI PRD) Asking the customer to buy 2 servers for XI