Mini display to s-video possible?

Hey everyone.
I have an aluminum mac book, which has the mini display port on it. I saw in a store there is a mini-vga to s-video...but what about mini-display? Basically I want to be able to hook up an s-video to my computer so I can watch movies on my tv. Are there any other options I'm unaware of?
Thanks,
-Neil

There is NO way to directly connect to a standard-definition TV through a Mini DisplayPort (i.e. no simple cable adapter).
However, you can connect using a setup similar to what is discussed in the following post:
http://discussions.apple.com/message.jspa?messageID=8361557#8361557
If you want to connect to an HDTV (DVI or HDMI) see this post:
http://discussions.apple.com/message.jspa?messageID=9559542#9559542

Similar Messages

Mini display to s-video won't work in windows xp on macbook 1.1

I am trying to get my mini display adapter to work in Windows xp service pack 3 on my macbook 1.1, all I get is a black flash on the screen but no picture, it works fin on the Mac side, I am trying to record a pripriority insight .AV video to a vcr and it is window base only, I would do it on the Mac side but can not find a Mac Base AV player that plays a .av file, I am running Mac osx10.5.8 ...... thanks in advance

The adapter is a mini display to s-video

Mini display to s-video adapter wont work in windows xp

I have a Macbook 1.1 and can not get my mini display adapter to work in windows xp, it flashes a black screen really fast like it is trying but no picture.... i am running xp with service pack 3 and all updates are current, any suggestions would be greatly appreciated... thanks in advance

The adapter is a mini display to s-video

Mini display port - video only?

Hey,
I'm just wondering if the mini display port is video only as I've read in some places, and if so, what is the best way to connect my MacBook to my Samsung 26" TV?
Thanks

It's a video-only output.
You'll probably get better help in the aluminum MacBook forums here:
http://discussions.apple.com/category.jspa?categoryID=249
~Lyssa

Mac mini with Apple Mini Display to VGA adaptor

Hello,
I have just purchased a new i5 mac mini, and have started to use it with an HDMI TV. This is great, but I really want to go back to using just my VGA monitor, which is an LGFlatron W2243S.
So, today, with the HDMI plugged in, I put a Apple Mini Display Port to VGA adaptor into the back of the mac mini, hooked it up to the monitor and great. The monitor was recognised, and it actually appeared as a second display.
But then, I pulled out the HDMI lead, and that was the start of the trouble. I now cannot get the LG monitor to work - instead it goes into power saving mode. I have proven the VGA cable, and also noted that the display settings do detect the monitor, but it just keeps going into power saving mode.
Reading on the internet I've found talk of the power from the mini display port being a possible problem.
At the moment then, the HDMI is still plugged in. Any advice on any settings I should be using to get the mini display -> VGA adaptor to work with the monitor? It is obviously working in some form (a) because I can't believe apple would continue to sell a dud product and (b) because it did occur briefly as a second monitor.

I've got some more information which I'm hoping might enable someone somewhere to help!!
So, I've just connected up the monitor again, with success. Both the HDMI and VGA monitor as mirrorred displays.
Then, I removed the HDMI connection, and the VGA monitor stayed on. I was also able to change the resolution successfully on the VGA monitor.
Then I restarted the system. The VGA monitor went into standby and wouldn't wake up from power saving mode (therefore was not able to see the password screen).
Plugged the HDMI back in (as well as the VGA) and restarted. Password screen came up on the HDMI screen. OS started up as normal, then the VGA screen came back to life on mirrored display.
So there is some level of success occuring now, except on restart. It seems as once the OS loads, it sends the signal to the VGA to switch on, but not on the password screen. Note that I do not want the HDMI screen connected - just the VGA. It's really a TV and I want to use it elsewhere.
I also downloaded the DP to VGA firmware update, but even with everything plugged in (and ironically with the VGA on and working!) it says that it cannot find a DP to VGA adaptor!!
This all suggests to me that things work, but that there's something I'm not quite doing right somewhere. My PC connects to the VGA monitor fine, and comes on at power up.
Thanks in hope.

Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. scree

Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank you

Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

Is it possible to connect an external blue ray drive via USB with a mac mini to watch HD videos?

Is it possible to connect an external blue ray drive to a mac mini to watch HD videos? Iy yes, what additional software / hardware is necessary?

Saul in PA wrote:
There is some new software that allows playing:
http://www.macworld.com/article/160977/2011/07/blu_ray_movie_playback_comes_to_t he_mac.html
Did you even read the article you linked to?
Here's a quote from it
"The video itself looked fine when it played properly, but it stopped and started constantly, and often displayed with huge, ugly artifacts. And at times, the app would freeze completely and require a force quit.
Just to make sure it wasn’t a problem with one Blu-ray disc, I tried some others. With Hot Tub Time Machine the results were much, much worse. It got a few seconds into the United Artists logo before the movie and completely froze playback. On several attempts. With David Cronenberg’s The Fly, playback was generally better—but the software played the ‘making of’ movie instead of the actual film. I thought there might have been a preference to help with the movie selection, but—wait for it—the Preferences item didn’t do anything when I selected it."
Not very promising is it

I am attempting to plug my mac into my tv. I am using the mini dvi to s video adapter. When I plug it in, the display goes all wonky and becomes stretched and enlarged.

When I attempt to connect my mac to the monitor using a mini dvi to s video adapter the display becomes enlarged and stretched. I cannot seem to fix this using the system preferences or the quick keys that allow you to zoom in on the display. Any suggestions?

I am using MAC OSx 10.5.8 (9L31a) as my operation system. The TV says "No signal. Check connected device's power, cable connection and source selection." Seems to me that that goes in hand with what the Samsung tech said about the Mac needing to be forces to use the external display. But how do I do that?

Mini DVI to S-video display problem

I connect my macbook to a plasma TV using mini DVI to S-video adapter so I can give keynote presentations. All of a sudden, having not changed any settings, the plasma display went to black & white while my macbook's display remains in color. I have checked with two different s-video cables and with another TV, as well as trying to change the color display in my system preferences, but after several hours have given up. Anyone else have this problem or have any thoughts on how to alleviate it? Thanks
Hungus

A wire may have broken inside the mini DVI to S-video adapter. S-video uses one wire for the brightness, and one for the color information. If the color wire breaks you will get a black and white picture. Until Apple replaces the adapter, you could use the composite video output, but the picture will not be as sharp.

Is there a way to predict which video projectors will not work with the 2012 MacBook Air using the Mini-display to VGA adapter?

I recently upgraded from a 2011 MBA to a 2012 MBA due to the larger capacity SSD. The 2011 MBA running Lion and Mountain Lion worked with every video projector for lectures. The new 2012 MBA is hit or miss with video projectors. It is not an adapter problem. I have multiple Apple mini-display to VGA adapters with the latest firmware. They all work just fine with the 2011 MBA. Re-starting the 2012 MBA with the adapter and projector connected has not helped.
It it not acceptable to have a laptop that works with projectors some of the time. Apple is aware of the problem. Is the only choice to go back to the 2011 MBA?
RC

I installed 10.8.2 update today with my 2012 MBA. The details of the update include: Resolves a video issue with some VGA projectors when connected to certain Mac notebooks.
I tried using the MBA with a video projector and it found the correct resolution and connected with the projector automatically. Using detect displays in the disoplay preference pane wasn't even necessary.
I hope this is the fix I have been waiting for with the 2012 MBA.
Thank you Apple.
RC
(http://support.apple.com/kb/HT5460)

I have a MacAir, mid 2011 model, and want to view video on my TV. I see that I need a mini display port to Hdmi but there are many of these. What exatly do I need and how does one view a movie downloaded to the MacAir on a TV screen?

I have a MacAir, mid 2011 model, and want to view video on my TV. I see that I need a mini display port to Hdmi but there are many of these. What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?

Welcome to Apple Support Communities
That's exactly what you need. A Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US
This is the only way to view a video on the TV. After connecting your MacBook Air to the TV, image on your TV should show immediately. Then, press Command and F1 keys to mirror your MacBook Air display, and open the video

I have a Macbook Pro 13.3 i5 w/ no hdmi port. How can I connect my Mac to TV to watch video, photo ? Is the Thunderbolt port a mini display port where I can use a mini display port to HDMI cable? If not, what are my options??

I have a Macbook pro 13.3 w/ i5 that has no hdmi port. I want to be able to connect the Mac to my TV set to watch Video, Photos and files from Mac to TV.
Is the Thunderbolt port similar to a display port or mini display port? Can I use thunderbolt port to connect thru a mini displayport to HDMI cable or converter?
Been trying to locate a USB to HDMI cable or converter (at a reasonable price) but all I found is a displayport or mini displayport to HDMI cable/converter.
What other options are available ?
Thanks a lot for your assistance.

Thunderbolt uses a Mini DisplayPort adapter to send video and audio to HDMI. Here's some on Amazon http://www.amazon.com/s/ref=nb_sb_ss_c_2_8?url=search-alias%3Dcomputers&field-ke ywords=mini+displayport+to+hdmi&sprefix=mini+dis%2Caps%2C249#/ref=nb_sb_noss?ur l =search-alias%3Dcomputers&field-keywords=mini+displayport+to+hdmi+with+audio&rh = n%3A172282%2Cn%3A!493964%2Cn%3A541966%2Ck%3Amini+displayport+to+hdmi+with+audio

How can I connect multiple devices to Mac mini display port? I need to connect a Canon 5D to my Mac and display the result on a VGA video projector. I am using mini hdmi to mini display for the camera. Can I connect the VGA to any other port?

Hi there I am connecting a Canon 5D to my laptop trying to use it as a webcam trough camtwist.
At the same time I need to output the streaming to a videoprojector.
The cam is connected to the mini display port do there is no port available for the VGA cable anymore.
Do I need to use a different port for the projector? Should I buy a video card?
Can't connect the camera via USB as that is too slow and it will freeze.
Many thanks for all your help
Best
Faeve

You might do better on a forum other than this one, which is "Using iPhone"

How can I get a video signal using IMAC 27 with only mini display port. I like to send the signal wireless to a TV using a TV/audio transmit system.

I have an IMAC 27 with a mini display port ( only this). I also have all the adapters ( mini display port to VGA, HDMI...).
Since I moved to UAE I like to transmit the signal frm my IMAC ( where I also look German TV on) to my TV. I will do so by using a wireless Transmit receive system with theree cinch inputs ( transmit system ( video, 2x voice).
The distance to the TV IS ABOUT 10m and one wall. I don`t want to use a cable.
Is there any solution for example mini display to VGA + VGA adapter to cinch so I can use the transmit system?
HDMI would also be an optiekn, bat then I have to by another Transmit receive system.
If somebody made already the experience I would appreciate to share the information
Is there may be any store in UAE where to get support. It is very diificult to get good advice here. They sell everything bat can not reaaly explain and have very often no technical knowledge. With this problem nobody until now can help me.
Hans
<Email Edited by Host>

I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

Mini Display to VGA adapter stopped. The Mini Display to HDMI is still working fine. How´s that possible?

The mini display to VGA adapter had stopped, whinle the Mini Display to HDMI keeps working fine. The minid display to VGA adapter was replaced and the VGA cable as well, and the problem is the same. This test was made with two diferent monitors with VGA entries. How´s that possible to happen? Is that a configuration trouble in the MBP?

The Apple´s customer support gave us the solution for this problem:
SMC reset
PRAM reset
The VGA adapter return to work properly aflter this procedure.

Mini display to s-video possible?

Similar Messages

Maybe you are looking for