Mini Displayport - 2009 vs. 2013

I have a Mac Mini ("Early 2009") and according to its spec. it has a "Mini Displayport".  I have a MacBook Air ("Late 2010") and its spec. also indicates it has a "Mini Displayport".  However, these two are physically very different -- the MB Air's port is much smaller. 
The MacBook Pro we just purchased has the same kind of port as the MB Air.
I'm trying to purchase an adapter that is: Mini Displayport (older/larger version)-Female to Mini Displayport (newer/smaller version)-Male, so that I can plug an older cable (one that plugged into the earlier model) into the new MBP. 
Since both ports are referred to as "Mini Displayport" how would they be distinguised in specifying this kind of adapter?

If the Tech Specs for the late 2009 Mac Mini are to be believed, it has BOTH a Mini DisplayPort and a Mini DVI port output (a Mini DVI port is not very small).
Graphics and video support
NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory3
Extended desktop and video mirroring: Simultaneously supports up to 1920 by 1200 pixels on a DVI or VGA display; up to 2560 by 1600 pixels on a dual-link DVI display using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
Mini-DVI port
DVI output using Mini-DVI to DVI Adapter (included)
VGA output using Mini-DVI to VGA Adapter (sold separately)
Mini DisplayPort output
You cannot use more than one adapter. If you want to use a DVI device, use a full-size cable -- the Mini DVI is not standard.
If you want to run a DVI device off a Mini DisplayPort, a cheap adapter will suffice for displays under 1920 wide. Wider displays are more complex.

Similar Messages

  • How to connect a 2009 Cinema Display with mini DisplayPort to modern card

    Hello:
    I am ready to install a new NVidia Quadro K5000 for Mac in my not so old Mac Pro 4,1 (2009). I already installed Mountain Lion (10.8.3) as required. The problem is that the Mac Pro came with a Led Cinema Display which apparently only can be connected with a mini DisplayPort plug and the graphics card only have DVi and DP 1.2. I tried to find an adapter but the ones I have find are minidp male to DVI female and obviously I need a minidp female to DVI or DP female.
    I will appreciate any help.
    Alex Sierra

    The fifth and sixth item on this page are DisplayPort male to Mini DisplayPort female "Extension cables". Under US$6 plus shipping from a reputable seller:
    http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10246#1024602

  • Using Mini DisplayPort to VGA Adapter to connect Macbook Pro (2009) for a presentation via projector.

    When I connect my Macbook Pro (2009 model) using a Mini DisplayPort to VGA adapter to display a presentation via projector, only the top-left portion of what is displayed on my Macbook Pro's screen is displayed on the projector, as though I zoomed in on that portion of my screen. The projector is on and the adapter and the cable that connects the adapter to the projector machine is correctly connected. Any suggestions on how to fix this problem?

    Hi glraczon.support,
    It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
    Here is an article that may help you with that process:
    OS X Mountain Lion: About the Display pane of System Preferences
    http://support.apple.com/kb/HT5369
    Thanks,
    Matt M.

  • Apple 20" CD connects fine to MacBook Pro 2009 via DVI to Mini displayport (adapter) but not to Radeon 5770 (either MDP ports) on MacPro 2008?! Have Eizo CG223 on DVI to 5770. Any ideas?

    Here's the setup:
    Eizo Coloredge CG223 DVI to DVI on MacPro 5770 interface (ACD works fine on this too, naturally).
    Apple Cinema Display 20" have the DVI connector. I have a Mini Displayport to DVI adapter on this, into one of the 5770's MDPs, neither of which seem to work.
    Plug the same ACD via DVI (with DVI to MDP adpater) into my MacBook Pro 2009 MDP and it works fine as a second screen.
    So what's up with the 5770 MDPs? I've seen online that the card should at least support two displays, either MDPs x2 or MDP and DVI. I've seen there may be an issue with three, not two.
    Any ideas please?
    Thanks,
    Y

    Striped down to bare inputs - monitors and keyboard/mouse. Works! Dimerising must have interfered with it. Phew!

  • 2009 24-inch iMac 3.06GHz (EMC no. 2267).   I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade?  I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

    2009 24-inch iMac 3.06GHz (EMC no. 2267).   I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade?  I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

    You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
    On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV.

  • Mini DisplayPort to HDMI Adapter by Belkin for iMac 2009 failed to work

    This is an SOS message. I have purchased another Mini DisplayPort to HDMI Adapter and I have iMac (27-inc, Late 2009) running OS X Yosemite (Version 10.10.1).  I have carried out the connection of Mini DisplayPort to HDMI adapter to LG Plasma TV Screen, but there is no sign of any of the equipment reading or aware of the connection.  Is there anybody out there who can help me make it work?  Also, why is that Yosemite - System Preference, click on Displays does not contain - Arrangement?  I'll greatly appreciate any useful tips from the community or apple support team.

    Eric has helped in providing in dept understanding around the subject matter, but unfortunately, it has not provided the solution to the problem.
    The Mini DisplayPort to HDMI Adapter when connected to the external Plasma TV screen, nothing happens.  The System Preferences was accessed -and the Displays monitor sign was clicked, but it only showed - Display/Colour, which according to the instructions / descriptions contain in the - Video Troubleshooting Internal and External Monitors literatures and video, there seems to be missing - Arrangement / or AirPlay from my OS X Yosemite version. 
    The above is the version of OS X Yosemite - showing on my *iMac when clicked on System Preferences, and as result I have not been able to make the Mini DisplayPort to HDMI Adapter to LG Plasma TV Screen to work.
    My *iMac is -
    iMac (27-inch, Late 2009)
    iMac10,1
    (10.10.1)
    MB952XX/A
    Running OS X Yosemite
    When the above image is compared with the following image below, there is definitely something missing and it’s probably affecting the Mini DisplayPort to HDMI Adapter to work in my connection.
    Questions:
    How can I make my iMac 10,1 (27-in, late 2009, currently running OS X Yosemite 10.10.1) to have the above AirPlay mirroring or Arrangement to activate the connection? 
    Are there other ways I can make the connection to work?
    Is there any body who has a similar iMac specs and OS X Yosemite who has overcome connecting to external Plasma TV Screen?

  • Mini Displayport to DVI Adapter Problem on Mid-2009 Macbook Pro

    I have a new mid-2009 Macbook Pro hooked up to a 20" Samsung 2033sw LCD with a native 1600x900 resolution using a mini Displayport to DVI adapter that I bought off of EBay. No matter what I've tried I can't get anything to display on the external Samsung LCD higher than 1024x768. I tried switching between GPU's and that made no difference. Any ideas.?

    Michael, thanks for the reply;
    When you open System Preferences/Displays does a second preference panel open up OK on the Samsung ?
    Yes, but I can't see it unless I select 'gather displays'. Then it appears on the MBP LCD, and showing the correct resolution - 1600x900.
    Is there an Options Tab visible under which you can check 'Overscan' ?
    None that I can find. Only display and color tabs.
    Is the Refresh Rate set to 60.0 Hertz
    Yes, that is what it shows in Refresh Rate.
    I also pulled out an older LG LCD that is fairly generic, .e.g. it has DVI in at 1280x1024. Same problem on that LCD ... nothing higher than 1024x768, but this time at 1280x1024 I get major noise and screen distortion. The displayed image is jumping all over the place, but at least there is something displayed.

  • Any Mini DisplayPort to HDMI adapter with audio for macbook pro mid 2009

    connecting MacBook Pro (15-inch, Mid 2009) to Hisense TV with audio?!?!!?
    hello everyone.
    if anyone is familar with successfully getting the older macbook pros that dont support audio out to stream and preform digital audio on a TV or has any helpful information that will get me familiar with trying to successfully stream audio and visual. and can PLEASE HELP ME in any way to understand what they know and teach me how to solve my problem id really appreciate it.
    i want to connect my MacBook Pro (15-inch, Mid 2009) to my Hisense LED LCD TV, ModelNumber:40H3E  and getting digital audio sound from my TV as well as video, but have no clue on how or where to even start to successfully pairing the two and getting sound.
    I own a MacBook Pro (15-inch, Mid 2009) this MacBook model doesnt support an HDMI port. My MacBooks model has the Mini Displayport which supports video out but does not support audio out. Can someone help me by telling me exactly which Mini DisplayPort to HDMI adapter with audio will support my model MacBook Pro (15-inch, Mid 2009) and exactly what HDMI wire do i need to buy that will successfully preform digital audio and sadisfying quality visual through TV?
    i have NO expierence with the proccess have NO knowledge about any of this or these Mini DisplayPort to HDMI adapters with audio. i have no idea what kind of adapter and HDMI cord to buy that will give me sound from my tv for my type of macbook. '
    im not familar AT ALL with any of this so i hope me giving you my MacBook Pros make and model and my TV's model number will be enough information for someone to help me.
    just please give me anything you can on this topic
    thank you so much,

    With a 2009 MacBook Pro, you need to use two connections to your TV: one for video and another one for audio.  The miniDisplayPort on the 2009 models does not support audio, so you need a separate audio cable:
    miniDisplayPort adapter for video - I use the Apple miniDisplayport-DVI adapter + a DVI-HDMI cable like this one
    audio cable for audio - use a 3.5mm male stereo-to-2xRCA male cable like this one
    Connect the miniDisplayport adapter + DVI/HDMI cable to your MacBook Pro's miniDisplayPort output and the HDMI input on your TV
    Connect the audio cable to your MacBook Pro's audio out and your TV's audio in
    The only potential gotcha is if your Hisense TV requires audio via the HDMI cable when you use an HDMI cable.  The H3e user manual is unclear about this.

  • 2013 27" iMac using mini displayport to VGA, external monitor off center.

    I recently purchased a new 2013 iMac 3.5 i7 and connected two external monitors. The minidisplayport to DVI adaptor works fine on one monitor but the minidisplayport to VGA is off center on the 2nd monitor. There is a 2" black band on the left side of the screen. I've replaced the adaptor, cable and tried on two different monitors. I've also tried repositioning image in the monitor settings which it can't move far enough. It only happens on 1920 x 1024. Any other resolution is fine. Other than that it works fine, but this space is going to drive me nuts. Because these are 23" monitors I really would like the highest resolution possible. I'm stuck. Any thoughts?

    Update: I switched to DVI and it worked perfectly. I guess there could be an issue with the mini displayport to vga adaptor on the 2013 iMac. I also tested it on a 2012 mac mini and the vga operated as it should.

  • Connect Mid-2009 Macbook Pro to HDTV via Mini Displayport to HDMI adapter

    Hello,
    I'm trying to connect my Mac to my HDTV via a Mini Displayport to HDMI converter I bought at the Apple Store. I have tried on three different HDTVs, none of which allow me to output video. I have tried adjusting the resolution to every available resolution under system preferences. Any advice as to how to resolve this problem would be very much appreciated.
    Thank you,
    Jordan

    I'm having the same problem, also with a 2009 13" MBP and a Mini DisplayPort to HDMI adapter.  Does anyone out there have a solution?  Do we need a different kind of adapter?  My tv is a Samsung 720p.  My boyfriend can connect his PC laptop with an HDMI cable with no issues.

  • How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

    How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

    Composite is analogue with one connector. That is why it is called composite
    Component is analogue with three connections. I think one for each color
    Here is the one for component. I misread composite for component
    http://www.amazon.com/DVI-I-Component-DisplayPort-Female-Adapter/dp/B003OBOJC2

  • Can Adobe Premiere run on 2013 Mac Book Pro (thunderbolt port) and display on 2010 iMac (Mini DisplayPort) using TDM. TB cable   Opt. F2 didn't work. Will a Mini Display cable work?

    I need to work on Adobe Premiere on my 2013 Mac Book Pro (with thunderbolt port) and display it on my 2010 iMac (with Mini DisplayPort) using Target Display Mode (TDM). I tried using a thunderbolt cable plus Option F2, but it didn't work. Will a Mini Display cable work? Any other suggestions?
    iMac specs - 21.5 inch 2010 iMac 3.06 GHz Intel Core i3 4 GB 1333 MHz DDR3
    Mac Book Pro specs - 13 in. retina 2.6 GHz Intel Core i5 16GB 1600 Mhz DDR3

    2010 iMacs do not have Thunderbolt, they have mini-display ports. You are using the wrong connection, you need a mini display port to mini display port. Please read up on what Apple says in Target Display Mode: Frequently Asked Questions (FAQ)

  • MBP 2009: Audio over Mini DisplayPort

    Hello
    I previously ordered a Mini DisplayPort -> HDMI cable (http://www.amazon.co.uk/1-8m-DisplayPort-Adapter-Unibody-MacBook/dp/B003WVC8R2/r ef=sr1_fkmr01?ie=UTF8&m=A1T39SA8AUFT6J&qid=1289477962&sr=1-1-fkmr0).
    It's been working great with my 2009 model MacBook Pro, however I have to use a separate cable for audio.
    When in the Apple Store recently to fix a battery problem on that laptop, I got into a discussion about audio through HDMI on this model. According to the Mac Genius audio through Mini DisplayPort was enabled on older devices through a firmware update (and he said his Mac Mini now uses one cable to do audio and video).
    Audio is not working with the cable above - but was I incorrectly informed by Mac Genius, or do I need a different cable that does support audio?
    Thanks
    Jamie

    All we know about your MacBook Pro model is that you've identified it as a "2009 model MacBook Pro." Apple introduced audio-out via mini-displayport in the April 2010 MBP models, so if yours was bought before then, it didn't have that capability when it was new. To the best of my knowledge and belief, nothing that has happened or been released since then has changed that.
    [This article|http://support.apple.com/kb/HT4241], updated in June 2010 (after the release of the latest mac Mini), lists the Mac models that supported audio via mini-Displayport at that time:
    "iMac (Late 2009), MacBook Pro (Mid 2010), MacBook (Mid 2010), and Mac mini (Mid 2010) supply multichannel audio (up to 8 channels) and video signals over Mini DisplayPort."
    I haven't heard of any update that has changed that list since then. If it were possible to enable audio output by means of a firmware update, I think Apple would have made that update available to all owners of mini-Displayport-equipped Macs, not just some of them.

  • How many pins has my Mini DisplayPort ? 32 or 20 ? I have a late 2009 MBPro 13" (Impossible to find this answer online!)

    How many pins has my Mini DisplayPort ? 32 or 20 ? I have a late 2009 MBPro 13" (Impossible to find this answer online!)

    Thanks - that's what I am worried about.
    The 2010 MBPro is a different version when it comes to the Mini DisplayPort because the 2009 MBPro doesn't transmit audio ony video whilst the 2010 MBPro does both.

  • Feb 2009 MBP-Audio out thru mini displayport?

    Does my MBP, bought new in February 2009 (Build 10F569) support audio OUT on the mini displayport?

    No. That was introduced with the April 2010 models.

Maybe you are looking for

  • Can the new AppleTV be Velcro mounted?

    Since this thing is so small, might it be possible to Velcro mount it to the back of one's TV so it's not even noticeable? It's got no moving parts, does it?

  • .wmv format

    I have downloaded a .wmv file and want to view it. Can you view this type of file through iMovie or QuickTime? Thanks, Cheryll

  • Some clients print, some don't

    Server is PPC running OS X Server 10.4.11. Clients are OS X 10.4.11 or 10.5. Users are enabled for print in WGM, Server Admin says Print Services are on. Epson printer is connected to the server. Some of the clients can print to the shared printer. S

  • Print Image Action

    OK so this would be really convenient if I could get the Scale to Fit option to actually work. Say I have an 10x15-inch document, and I want to print it on a letter sized paper, which we print all our proofs on. Our document sizes vary greatly. When

  • The sound on my Iphone 4 has completely stopped working.

    I can't hear any sound at all, except when my headphones are plugged in. If I do get the sound to work, as soon as I use the volume button it quits again. I have tried rebooting my phone, but I don't want to do any more than that because I am not the