Mini Displayport, Audio and Snow Leopard

Hello everybody!
It is my first post here, so excuse me if I'm in the wrong section (and by the way, sorry for my skill in english).
I'd like to know if audio is now supported in the mini displayport with Snow Leopard?
Thanks,
Julien

I did see this, however, with a Google search.
http://www.macyourself.com/2009/07/10/kanex-mini-displayport-to-hdmi-adapter-wit h-audio-in-august/
Apparently, this product will combine the video output from the Mini DisplayPort with audio output over USB into a consolidated signal over HDMI. Pretty cool.

Similar Messages

Mac mini's memory and snow leopard?

Alright so I have a mac mini. Runs on tiger. Well a friend bought me the sims 3 for my birthday but comes to found out i need os 10.5 and higher. Well I went out and bought snow leopard since it was cheap and THEN come to find out i need 1 gb ram.
To be honest i know nothing of computers.
so i check the memory and it says 512 mb
is that my ram?
if so are there tiny pieces of ram floating around my computer or do i need to buy another ram card?
really i might take it to the apple store to get it done but i don't feel like spending money on an analysis
thanks in advance

is that my ram?
Yes.
if so are there tiny pieces of ram floating around my computer or do i need to buy another ram card?
Yes to both.
A CoreDuo has a fairly weak graphics chip, so it may or may not be able to run the Sims 3 depending on the version it has. Read the specs on the graphics card on the software package's exterior. If it says Core2Duo or higher required, you can't run it on a CoreDuo machine. If it says ATI or nVidia required, you probably can't run it on a Mac Mini of that age.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

When baltwosaid NO emphatically, that was described as CORRECT ANSWER. Ditto in the caeses of the radically different answers from Camelotand Matt Clifton
Could it be that CORRECT ANSWER needs better defining by Apple?
That apart, yes, switching might involve rebooting. About the voices, well, I was the other day adding voice to a commentary in a video I was working on. There's only American English accent in SL — Lion I believe has British ones as well.
Why not, I wondered, try to install Lion purely for academic interest, maybe with an SD card (Sandisk Ultra II, 16GB) as Tom Nelson says is possible at http://macs.about.com/od/macoperatingsystems/ss/Perform-A-Clean-Install-Of-Os-X- Lion-On-Your-Mac.htm

My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?

What am I missing here. I'm sure it is some kind of sitting that is not right.
Thanks Pat

Sounds familiar:
lllaassJan 6, 2015 2:12 PM Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?
Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?in response to Patricia Isaac1
Power off and then back on the router
What happens when you enter the network's PW?
Try forgetting/deleting the network if necessary. To do that go to System Preferences>Network>wifi>Advanced and select the network and click on the minus sign
Csound1 wrote:
Turn off the modem and the router, wait 60 seconds. Turn on the modem, wait 60 seconds, turn on the router.

Can i sync my ipad mini to my imac snow leopard and then to my iphone4

can i sync my ipad mini to my imac snow leopard and then to my iphone4

iCloud requires OS X Lion (10.7.2) or higher. You will need to upgrade to either Lion or Mountain Lion in order to set up iCloud on your Mac. First check to see if your system meets the system requirements to upgrade.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion system requirements are shown here: http://support.apple.com/kb/HT5444.
If you can run Mountain Lion, you can purchase an upgrade from the Mac App Store. If you can only run Lion, contact the online store in your country and purchase a download code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you may want to check the compatibility of your existing programs by checking here: http://roaringapps.com/apps:table.

How do I get a Mini DisplayPort adapter and HDMI connection working for my Older MacBook Pro?

I bought a Belkin Mini DisplayPort adapter and attempted to hook it up on two different tvs using two different HDMI cords. I've always received a "no signal" message. I haven't even been able to get my desktop to appear. My display settings doesn't include a mirroring option and I only have the option to use my computer as a sound output. I've called apple support and I went to geek squad. Is it just impossible for older MacBooks?? I have Snow Leopard 10.6.8 and all of the forums I've read say that video should work at least. I switched out my adapter for a rocket fish one and still no luck. The geek squad employee couldn't get it to work on either adapters. Please Help!

I upgraded my OS to Mountain Lion and now it works perfectly. However, I'm getting random green and black splotches on my screen when I'm not using it with the TV.

Problem using text to speech with Pages 09 and snow leopard

Hi,
I am writing a large document and use the start speaking function often to hear parts of it read back after I write it.The speech sounds great for a page or two and then starts to become choppy and skips words and eventually becomes inaudible except for a few sputters. I would like to be able to listen to the entire document when I am done and would like to either solve the sputtering problem or find a new app that will allow a long paper to be read back by the computer. This problem is consistent on my macbook(2010) as well as my iMac(2009).
Thanks for any suggestions in advance.

I have to constantly reboot/restart between Lion on my New Thunderbolt Mini and Snow Leopard off and External Drive.
Why? There is no good way to do what you're doing.

Using one program Application on both Lion and Snow Leopard

I have to constantly reboot/restart between Lion on my New Thunderbolt Mini and Snow Leopard off and External Drive. What is the recommendation for using programs (which are built to run on both) such as iwork pages. Should I use one program off the Main Lion Internal HD? or as I have now - Maintian two programs, one on each hard drive. I can see Lion is having difficulty as it can see the other program and sometimes it launches the version on the SL drive. When in Snow Leopard the OS cannot search and therefore not register items not included in the Main Boot Drive.
I am a single user, so I'd like consistency in maintaining templates (and now version!?!) when I want to draft a letter and can't waste time to reboot. All my documents on both OS's are directed to a 3rd Drive to effectively keep my sanity. I was syning the preferences previously for mail and passwords,etc but recently the functions of Lion have expanded so much beyond SL as that I had to swtich off this sync to avoid conflicts.
Should I keep using two programs or when available use a single version. Noting this wont be on the boot drive of one of them. If I go to one. Can I keep the other on its boot drive in case of transporting it to another machine. Is there a way to park it so it's not referenced to use when I launch by opening a file? I though about zipping it? What happens when a version update might excel beyond SL? The current programs known already have 2 versions residing on each boot drive. If I go to 1 and a software update comes along, that would be a problem.
Any and all experinces and suggestions are appreciated.

I have to constantly reboot/restart between Lion on my New Thunderbolt Mini and Snow Leopard off and External Drive.
Why? There is no good way to do what you're doing.

Can I have both Lion and Snow Leopard on One Hard Drive?

My problem is I need to run a PowerPC game on Lion which Lion no longer supports. So i thought i could download Snow Leopard back to my Mac and partiition my hard drive in the process as that is the only way i know of to have both Lion and Snow Leopard. I went through the Boot Camp Asistant process and it seems it will only partition Windows 7 to my Mac when i need Snow Leopard. If anyone has any idea how to help me have both Lion and Snow Leopard at the same time on just one hard drive or figure out how to run the PowerPC programs on my Mac (if there is a way around it). The help will be well appreciated!

How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
Create a new partition on the hard drive.
Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1.    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
       After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2.   You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3.    In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4.   Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the USB flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the external drive. Source means the Snow Leopard Mac's internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
          Restore the clone using Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the external drive.
If the above seems too daunting then you might consider running Snow Leopard inside an emulator such as Parallels 7. You are permitted to install a single copy of Snow Leopard inside a virtual machine. You will need to first purchase a copy of Parallels 7 and install it on your new Mac. Create a new virtual machine configured for Mac OS X. You may then install Snow Leopard in the virtual machine then download Mac OS X 10.6.8 Update Combo v1.1 and update to 10.6.8. Be sure to include Rosetta in your initial Snow Leopard installation. Rosetta is not installed by default rather it's an optional install.

In limbo between Leopard and Snow Leopard - stupidly didn't back up

I've got an old-school black MacBook, about four years old now. I never cared enough to upgrade it to Snow Leopard, but now I want Lion. So, I borrowed my parents' five-license Snow Leopard install disc and started off on the journey to upgrade to Snow Leopard, download the App Store update, then download and install Lion. I didn't get far.
First, let me say that I didn't back up my hard drive. Like an idiot. Yes, I know it was stupid, so there's no need to say anything. My previous installs (a few clean re-installs) have gone without a hitch, so I figured I'd trust Apple and just run the installation without backing up. Dumb.
The Snow Leopard installation started fine, but was interrupted when the installer said the install failed. Restart, try again. Booting from the install DVD, things seemed to be going fine a second time around -- picked my language, got to the install set-up screen, picked Macintosh HD as my installation drive. And then things stopped working. The installer said my HD could not be written to and that it needed repair. So I went to Disk Utility to try that. Repair Disk wasn't available, so I clicked Verify Disk. That got interrupted when it said the disk needed to be repaired, after which the Repair Disk button was clickable. Tried to repair, but apparently my HD is screwed beyond the capabilities of Disk Utility.
I tried to reboot the MacBook from the HD, which Disk Utility said still had Leopard running on it. The computer wouldn't boot up. Safe Boot didn't work. So, without any other real options, I thought I'd try my luck by just trying the install again. Booted up from the install DVD, and ran into the same issues. Didn't magically fix itself, of course. So my MacBook is stuck in limbo between Leopard and Snow Leopard, won't boot from the HD and won't let me repair the disk when booted from the DVD. What do I do?
I plan to try a couple third-party disk-utility programs tomorrow (8/25/11) to recover the files on my HD. There's not much I care about on there (just some iPhone photos and my resume, really), so doing a clean wipe of the HD and installing Snow Leopard is an option. But I'd of course rather be able to recover my personal files. Is this possible at this point?
Another question I have regarding a clean wipe: If I end up having to clean off the HD and lose all my data, I'll lose the iTunes configuration for my iPhone. Will iTunes be able to import my apps and settings from my phone if I plug it in?
Thank you very much.

For a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f

New 13" Macbook Pro trying to connect to a Panasonic VIERA TC-L42U30 as second monitor. I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. The Macbook does not sense the second monitor (TV). Help?!

I've been a Mac since 2008, so I know my way around the system pretty well. This issue, however, has me stumped. I had an iMac until now and only now am I experiencing some difficulty with my new MacBook Pro. The model I have is the newest 13" Macbook Pro model and I'm trying to connect a Panasonic VIERA TC-L42U30 42" HDTV as a second monitor via the Thunderbolt port.
It worked the first two times and hasn't worked since, after 10-15 attempts with different configurations, turning things on n off, restarting the mac, unplugging the cables, adapters, TV, resetting the P RAM, etc... I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. No matter what I do, the Macbook does not sense the TV as a second monitor anymore.
I took the MacBook Pro to the Apple Store, and their "genius" there had it working fine with a DVI connection to a regular monitor. The Panasonic TV I have has HDMI connections and one VGA connection which does not support HD, but no DVI option. I want an HD connection to mirror or extend my MacBook Pro screen. At the Apple Store, they didn't have a Thunderbolt/Mini DisplayPort to HDMI adapter, so he could not try that out for me.
Anyone else have this configuration or another similar one with a Panasonic HDTV?
Ideas? Suggestions? Anything?! Help!!
P.S. I'm running Mountain Lion, if that wasn't already obvious. Everything is up to date in my App Store as well.
Thanks!

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

I tried copying a photo and pasting it in another event/group within iPhoto but the paste feature doesn't work. This wasn't an issue with both Leopard and Snow Leopard. Do you have any solutions or tips?

I bought a new MacBook Pro with OsX Lion as operating system. I use iPhoto a lot and when I tried copying a photo then pasting it to another event/group, the 'paste' feature doesn't work. This wasn't the case with Leopard and Snow Leopard where the 'paste' feature worked. What I did was to paste the photo first to the desktop before transferring it to the new event/group. I brought my Mac to the Apple store where I bought it and the technicians were themselves surprised that the 'paste' feature didn't work. Chalked it up to glitches in the Lion os. So how do we fix this? I just find it absurd that a feature that used to work in Snow Leopard has been disabled in Lion, and the user still has to undergo an additional step to make it work, when new technology is supposed to make things easier for users.
Also, hasn't anyone noticed that it takes longer for the computer to boot upon opening?

Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
LN

CAn I run Lion and snow leopard on the same computer with different sign-ins?

CAn I run Lion and snow leopard on the same computer with different sign-ins?

Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard. Computer won't even acknowledge the iPod.

New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard (10.6.8). Computer won't even acknowledge the iPod. Have restarted both, changed ports, etc. What's do I need to do?

Have you tried here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not forget the Additional Information topic.

IPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

iPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Mini Displayport, Audio and Snow Leopard

Similar Messages

Maybe you are looking for